T450s WIFI and Ethernet questions

Similar Questions

• Any benefit to have the Wifi and Ethernet simultaneously?

  There is better performance, have Wifi and Ethernet switched on at the same time?

  It seems strange that I can have both at the same time.

  Outside access to printers wireless enabled (which is not relevant to me), I would like to know if there is an advantage to internet high speed.

  No,

• HP Envy 27 3 in 1netn: HP Envy 27 Wifi and Ethernet connections

  New HP Envy 27 and have now no end of problems in charge a constant connection or using Wifi or Ethernet.

  All my other hardware such as laptop, I phone etc work fine, number of calls to the Helpdesk but still no luck.

  anyone else having similar problems. Crashes for a brief moment, enough to cancel a download.

  Hello @Divanduin,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop computer is not able to connect to your wired or wireless network, and I'd be happy to help you in this case!

  To re - establish a coherent link between your computer and the network, I recommend later in this document on troubleshooting wireless network and Internet (Windows 8), as well as Troubleshooting Wired Home networks (Windows 8). This should help to run a diagnostic on your system using the network and Internet troubleshooting, as well as measures to maintain your system over the wireless network.

  In addition, I suggest also follows the steps below to ensure that your power management settings do not interfere with

  the connection to the network:

  1. open DEVICE MANAGER
  2. open the NETWORK CARDS
  3. right click on the WiFi adapter for the pc and left click on PROPERTIES
  4. click on POWER up.
  5. remove the check mark beside : ALLOW the COMPUTER TO TURN THIS DEVICE SAVE START STOP
  6. click on OK
  7. close DEVICE MANAGER and test.

• Two internet connection on the same PC (WiFi and ethernet)

  I have windows 8.  I have two internet connections. A cable (wired) and another in the microwave (wifi).  Normally isn't a problem because desktop computers are on the cable connections and the TV, laptops and other toys are on wifi.

  But sometimes I want to use two connections on a PC, like download a large file and stream and watch the Broncos game at the same time. I want to use Ethernet as a main and did use WiFi when Ethernet is too busy. I can't understand how to do this.  Anyone know?

  Hi Gerard,.

  You can activate the Wifi and cable connected at the same time, but you can use the Internet from one of them. The computer will prefer the cable if the cable is connected.

  If both are capable of providing Internet access, computer will prefer the wired (Ethernet) network to access the Internet (and not use the Wifi network to access the Internet).

  The advantage of using two connections is to get Internet access without interruption when a connection does not work.

  I hope this helps! Let us know if you have other problems with Windows in the future.

• Why is the internet on my Apple TV 4 speed faster on wifi and ethernet?

  Hello

  I have an Apple TV 4. I tested my internet speed using unit SpeedTest app. When I connect Apple TV to my router with an ethernet cable (5th), my download speed is 45 Mbps. When I unplug the ethernet cable and use the wifi, the download speed is 89 Mbps. Can someone explain why this could be? It should be the other way around.

  Thank you
  Ryan

  Hello

  I think that this may be due the port ethernet ATV 4 being only 10 / 100 Mbit/s. Your WiFi network is probably give at speed higher than 100 Mbit/s, allowing a faster data rate.

• Lenovo G510 problem wifi and ethernet

  Hello!

  I have two Lenovo laptops, G50 and G510. The first works perfectly except the second after 10 months started yesterday which have problems with the network adapter.

  The Wi - fi button is grayed out and cannot be opened and the ethernet port can not read any cable. I tried all the solutions I found on the web (deactivation and activation devices, uninstalling and reinstalling the drivers, updating the system and the system format) but failed. The ethernet adapter does not appear in network devices after the restoration of the system to its point original (format), even after installing the drivers for the network card I found in Lenovo support site. And all this happened yesterday when the only change in the system was a windows update. However if this was the problem of the restoration of the system, update and format should have fixed the issue.

  I used windows 8.1 but now after the format I use 64-bit windows 8. Could you give advice? Could this be a hardware problem? I'm desperate here.

  Really weird that both had fault at the same time. Try the following out the battery and the power source and press the power button without any power supply 5 times. And restart again.

  If not try to work the boot in safe mode with network and see what is happening here. In the login screen hold down SHIFT key and choose reboot option. you will see Win8 advanced options.

• Problem with Wifi and Ethernet

  My laptop is Aspire E1 - 570G. After the update to Windows 10 my laptop says Limited/Restricted each time when I want to use the Wi - Fi or LAN cable. Help, please.

  Ok.

  can you post your Lan Ethernet adapter model?

  key of the Windows logo + x

  Device Manager

  Click the network card

  then with the ethernet cable is connected, right-click on the icon with a yellow triangle next to clock and date, choose 'open network... '. »

  on the next window, click "ethernet", then click on 'details', take a screenshot and send me a private message to this screenshot.

• BlackBerry Storm 2 Smartphone connects to wifi and google question

  Gentlemen and ladies OK I got a storm 1 for about 3 years and it just died on me so they gave me a storm 2 to replace. brand new in the box. I installed everything and it works very well. I tried to configure my wifi at home and at work the first day and it has worked well, that was fast, now lastnight and now it does not connect. Its me gives a connected but the green check mark is not there. I noticed the difference, because the web browsing is slow everything to work. What can I do to fix this? I did the auto configuration deleted and made manual installation and still nothing. I have the data service on my phone, so I don't think it's a problem.

  also on my storm 1, I have google as my default search and now its bing and I want to change it google, but no option of google on the drop-down list, how can I do to change this?

  Thanks for your help!

  OK, so this job properly because you know, then?

  I'm confused if you still have the problem.

• Upgrade WIN8 on Acer Aspire M5 - 581 T-Wifi and judgment questions

  I own an Acer Aspire M5 - 581T. I have improved my Win 7 to Win8 system. My Wifi driver does not work. I tried to install Atheros WLAN pilot in the Acer software driver download site, but it error. Also every day, my laptop goes in a State does not, and am forced to stop my system from cold. All the fixes to these issues?

  Hi Harish,

  I apologize for the late response. Are you still facing this problem?

  If so, I suggest you to check if it was the driver that you have downloaded and installed. There are two categories available for download; one for 64-bit Windows 8 and an another Windows 8 64 bit updated for Windows 7. Make sure that you download and install the latest.

  http://us.Acer.com/AC/en/us/content/drivers

  This driver is compatible with Windows 8. If you still get the error incompatible, there is probably a problem with the driver. In this case, I suggest you to download and install the driver of Windows 7 in compatibility mode and check. You can download the driver for Windows 7 from the same link I provided above. You can find more information about the compatibility of this article:

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Try these steps and let us know the results for assistance.

• Network connection problem Wifi (Ralink RT5390R...) and Ethernet LAN (Realtek PCIe...)

  Hello

  With my HP Desktop Pavilion P6-2417eb on a 64-bit Windows 8.1 platform, I have serious problems to connect to a network or the internet. The office is connected to a router with wifi capabilities and modem broadband with wireless internet capabilities.

  Several other devices (computer laptop Lan and Wifi; Android tablets; IOS Tablet; netbooks; NAS server) are connected to the network via wifi and Ethernet LAN calbe with no problems.

  After a long period of crossing possible problems, I come to the conclusion that it is a problem of my dekstop PC-related equipment. In the past, a reboot of the desktop computer was enough to settle the problem, but these days it is no longer possible. This afternoon I was able to connect for 15 min and after it ended again. It was the first in a week again. I post this message with my laptop. I have 4 possible for Internet connection but no wok with this desktop computer.

  The following products do not work in my desktop pc:

  • Ethernet Lan, Realtek PCIe GBE Family Controller
  • WiFi, Ralink RT5390R 802.1bgn Wifi adapter

  What can I do? What are the solutions?

  Thanks in advance for any help.

  LB1503

  Hello:

  The only suggestions I can offer would be to see if updating the drivers for these devices help everything.

  Here is the latest driver for the card directly from Mediatek (Ralink) wireless:

  RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64

  Here is the latest driver for the ethernet card.  Download and install the third-party driver on the list.

  http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• Update IOS without WIFI and not with an Itunes client connected (aka want to upgrade with a stand-alone itunes client) is it possible

  I work for an agency after the output of devices in our production environment, the IPad can be connected to wifi or an instance connected to iTunes. I want to update these devices, but as you can see in my first sentence the traditional way is not allowed from a security point of view. Any help would be greatly appreciated.

  Care - Apple IPad Air (1st generation)

  -in the course of running IOS 6.1.6

  -put to update to the current version

  Windows based ITunes (ready to use the version that is never recommended)

  There is a conflict here:

  -or an instance connected to iTunes

  -Windows based ITunes (ready to use the version that is never recommended)

  The second sentence implies that you intend to update via iTunes which is in conflict with the first part.

  What is the problem? You want to update the devices.  You can update without wifi.  There are two ways without wifi: cable ethernet or usb to a computer.

  {It is not a coincidence.  You can connect via ethernet cable.

  connect the ipad to ethernet }

  You must be careful with updates.  You can't go back after the update.  The importance is the iPad to your operation?  You can just buy a new ipad and Exchange once you think you have this work.

  R