T460s with stylus Lenovo Active?

Similar Questions

• HP Elite X 2 1011 G1 compressed: secure with BCU TPM activation error

  Hi, I am trying to activate the TPM secure with BCU, but every time I get this error at startup

  "MUD embedded controller data are invalid then that MPM is locked.
  Please MPM to unlock and lock again to capture data of valid MUD. "with accept and 10 - > 0 counting down.

  -I am able to change the other settings of the BIOS with the BCU, but not of TPM.

  -the BIOS password

  -J' I reset the default bios settings

  This is the file I used for config

  BIOSConfig 1.0
  Security level of TPM device
  * Change
  View
  Hide
  TPM Embedded Security security level
  * Change
  View
  Hide
  BONES of TPM security level management
  * Change
  View
  Hide
  Reset the TPM secure of operating system security level
  * Change
  View
  Hide
  TPM reset to the factory settings
  * No.
  Yes
  Reset the TPM security of OS
  Disable
  * Select
  BONES of the TPM Management
  Disable
  * Select
  Activate the TPM on next startup
  Disable
  * Select
  TPM device
  Hidden
  TPM 1.2
  * TPM 2.0
  TPM activation policy
  * F1 at startup
  Allow the user to reject
  No prompt

  And it is the newspaper (after the second execution of the script, all the parameters have been updated in the first inning, but TPM activate next startup update every time I run the script)

  19/07/2016 11:25:22.240764 | 9040 | Definition of | HP:hared:treamLog:treamLog. Severity of log level > = Info
  19/07/2016 11:25:22.240764 | 9040 | Info | HP:hared:treamLog:treamLog. BEGIN.
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | * HP c. 4.0.15.1 Bios Configuration utility *.
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Platform: 2009 - HP Elite x 2 1011 G1 compressed
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | BIOS version: 1.13 16/05/2016
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Manufacturer: Hewlett-Packard
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Computer name: CL103009999204
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Serial number: 5CG55264Z8
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Unicode supported password: Yes
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS: Microsoft Windows 10 Enterprise 64-bit
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS version: 10.0.10240
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Command line: [BiosConfigUtility64.exe / set: new.repset /cpwdfile:12345678.bin / verbose/l]
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:23.022093 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "password successfully reading the file" / >
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation 'TPM Device security level' with 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM Embedded Security security level' with the 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation "OS management of TPM security level" with the 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting "Reset of TPM of operating system security level" with 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM reset to the factory default values' with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full setting 'Reset the TPM for OS' 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of "OS management of TPM" layout with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting 'Enable the TPM on next boot' with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full adjustment "TPM Device" 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Riddled with political 'TPM Activation' attitude 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Read the 10 file settings.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Apply all the settings of the BIOS
  19/07/2016 11:25:26.350584 | 9040 | Info | biosconfig::FileSettings:ApplySettings | In 'Device TPM security level' changeStatus = 'skip '.
  19/07/2016 11:25:26.366188 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Embedded Security security level' setting changeStatus = 'skip '.
  19/07/2016 11:25:26.381834 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'The OS level security TPM Management' layout changeStatus = 'skip '.
  19/07/2016 11:25:26.417235 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "Reset of TPM of operating system security level" changeStatus = 'skip '.
  19/07/2016 11:25:26.439250 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'TPM reset to the factory default values' changeStatus = 'skip '.
  19/07/2016 11:25:26.458811 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Reset of the TPM for OS' changeStatus = 'skip '.
  19/07/2016 11:25:26.475825 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Implementation changeStatus "OS the TPM Management" = "jump".
  19/07/2016 11:25:26.571695 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Enable the TPM on next boot' changeStatus = 'pass' returnCode = 0 oldValue = newValue 'Disable' = 'enable '.
  19/07/2016 11:25:26.591711 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "TPM Device" changeStatus = 'skip '.
  19/07/2016 11:25:26.614732 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Activation strategy' setting changeStatus = 'skip '.
  19/07/2016 11:25:26.642752 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Processing parameters: 10, errors: 0 warnings: 0, was ignored: 9, succeeded: 1
  19/07/2016 11:25:26.649256 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "no error occurred" / >
  19/07/2016 11:25:26.649256 | 9040 | Info | HP:hared:treamLog: ~ StreamLog | End.

  See you soon

  I noticed that using TPM 1.2 does not give me this problem, so I went to that and everything was good. I expected that TPM 2.0 was less probematic, but it is not true.

• Switch 10 Acer work with stylus?

  Hi, I want to know is Acer Switch 10 quote with stylus? Thank you

  [subject line changed to reflect the new topic]

  Yes, but it must be the stylus with the wide edge, like this.

• Black screen with a cursor active

  I have problems similar to others.  After that I connect to my computer, it goes to a black screen with a cursor active.  After a few minutes my screen saver turns on, but he won't top counter just a black screen?  I tried to start it 5 or 6 times without result. I haven't added new programs (that I know) unless they have been updated automatically.

  What is the problem and the fix... Thank you

  Original title: Steve

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Disable the automatic connection for Windows 7 with 1 single active account.

  I've searched high and low on Google but all I could find are methods to allow the automatic connection.

  Is it possible to have Windows 7 load to the top of the selection of Auditors even screen with 1 single active account?

  I remember what is a function available in XP.

  There are probably more simple methods, but it certainly works: create a fake account, then bring it to be hidden from the logon screen. The following batch file will do it for you when it is run under elevated privileges. Of course, you must disable the usual automatic connection setting via this command:

  Control userpasswords2

  And here's the batch file. Use the copy & paste - do not retype! Note that the line starting with
  "echo > % RegFile" is a very long line that ends in 'UserList]. " Not to break upward.

  off @echo
  Set RegFile="%temp%\reg.reg".
  echo > RegFile % REGEDIT4
  echo > RegFile % [HKey_Local_Machine\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\SpecialAccounts\UserList]
  echo > RegFile % "DummyUser" = DWORD: 00000000
  Regedit RegFile %
  NET user DummyUser supercalifrag / add

• Adobe Digital Editions will not activate with too many activation error

  Adobe Digital Editions will not be activated with too many activation error.  Technical support refused to help.  What can I do?

  To reset the client contact activation support cat https://helpx.adobe.com/contact.html?step=ADE_adobe-id-signing-in_stillNeedHelp and ask for the reset of the adobe ID.

• Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

  Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Trinidad Apache runs with control of activated timestamp.

  Experts,
  
  My web.xml file content

   <context-param>
      <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
      <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
      <param-value>false</param-value>
    </context-param>

  When my application is running I get the following on the weblogic console
  
  < ViewHandlerImpl > < _checkTimestamp > Apache Trinidad runs with control of activated timestamp. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
  < UIXEditableValue > < _isBeanValidationAvailable > Validation Bean A provider is not present, so bean validation is disabled
  
  is it not a bit strange? Please tell us what the problem is.
  
  thnks
  11.1.2.1 jdev

  If you speak the WLS integrated, timestamp control is automatically turned on anything so that changes you make in the IDE can be picked up. There is nothing to worry.

  John

• Cannot install Windows 10 on T460s with Samsung 950 PRO NVMe M.2 SSD

  I can't install Windows 10 on my T460s brand new. It was delivered with Windows 7.

  1. The original Windows 7 starts fine
  2. I started the installer of Windows 10 bootable USB
  3. I deleted all the partitions on the system and then tried to create a new
  4. The error message is displayed:

  Windows cannot be installed on this drive (show details)

  Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the drive controller is enabled in the BIOS menu.

  SSD: Samsung 950 Pro NVMe M.2 SSD, MZ-VKV512

  BIOS Lenovo: 1.11

  Windows ISO 10: en_windows_10_n_multiple_editions_version_1511_updated_apr_2016_x64_dvd_8710592.iso

  Check in the BIOS, UEFI boot is selected for the startup to STARTUP tab.

  You must also reset the configuration of the disk on the 950.

  1. start the Windows 10 ISO

  2. launch the command prompt (Admin)

  3. type Diskpart

  4 locate the SSD in the volumes

  5. type Diskpart/select volume # (SSD)

  6. type Diskpart / clean

  Output

  Start the Windows 10 ISO

  Installing Windows 10 should now work.

• that comes with the laptop activation key is not applicable to the type of windows installed

  Hello. I try to activate my windows with the product key that I saw at the back of my laptop but a habit of working because it says that its not applicable to the ultimate windows that is installed on my laptop... his view are rather than I run windows 7 all upward rather than windows 7 ultimate... I don't know how to do this. Help, please. Thanks :)

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture or
  contact PC manufacturing (see support links below) and order the recovery media.

  Note: Activation is not required when you use the recovery partition or recovery media, but you will need to reinstall all your applications.

  Also to save your documents on external support (if possible) before starting the recovery process.

  Once completed, your PC will be actually in the State when you first purchased it and turned on for the 1st time.

  To access the recovery Partition, start your computer, and then by pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the list below or your user manual for your brand and model.

  If your hard drive has failed, do not have a recovery partition or the recovery partition is not accessible,
  Then, you must contact the manufacturer support team and ask for a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  http://Acer.custhelp.com/app/answers/detail/A_ID/2631
  Acer support: http://www.acer.com/worldwide/support/
  Acer recovery support: http://store.acer.com/store/aceramer/en_US/eRecovery

  Advent: restart your computer, then the immediate start by pressing the [F8] key or the F10 key.
  The fastest way to restore your computer is to use the hard disk recovery tools. You can access them by restarting your computer and then pressing the [F8] key or the F10 key until the Advanced Boot Menu appears. Use the arrows to select "Repair your computer", then press [Enter]. Read all of the instructions on the website of advent and made your choice as to the action you want to perform: http://www.adventcomputers.co.uk/restore-or-reinstall-windows-your-computer
  Support: http://www.adventcomputers.co.uk/product-support/support-services

  ASUS: Press or press the F9 key as soon as you see the Asus logo.
  http://support.ASUS.com/troubleshooting/detail.aspx?SLanguage=en&m=X53E&OS=&no=1775
  ASUS support: http://support.asus.com/contactus.aspx?SLanguage=en

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=DSN_362066
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182
  Dell support: http://www.dell.com/support/home/us/en/19?c=&l=&s=
  Or: http://www.dell.com/

  EMachines: hold the Alt key and hold press and release the key F10
  http://Techchannel.RadioShack.com/eMachines-system-recovery-1747.html
  Support: http://www.emachines.com/ec/en/US/content/support

  Fujitsu: Press F8 several times directly after switching on
  https://answers.Yahoo.com/question/index?QID=20110406074143AAcx1Zw
  Support: http://www.fujitsu.com/global/support/

  Gateway:
  http://www.ehow.com/how_6297937_restore-gateway-laptop-factory-settings.html
  https://support.gateway.com/s/software/Microsof/Vista/7515418/7515418su531.shtml
  Support: http://www.gateway.com/worldwide/support/

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01867418&cc=us&destPage=document&LC=en&tmp_docname=c01867418
  Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  Lenovo uses the F11 key to launch the restore process:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4UFUYK
  Directions for Lenovo OneKey Recovery, hidden partition and recovery DVDs:
  https://support.Lenovo.com/us/en/documents/ht077384
  and: http://support.lenovo.com/en_US/detail.page?DocID=HT077144
  Support: http://support.lenovo.com/en/supportphonelist

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  You can also find parts of this article from Lenovo worth reading:
  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-4VFUDU

  LG: Press F11 directly after switching on / to start the computer
  Support: http://www.lg.com/

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.
  Support: http://www.packardbell.com/index.html

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.
  Support: http://www.samsung.com/

  Sony VAIO Windows 7: restart and press "F10".
  https://CA.en.KB.Sony.com/app/answers/detail/A_ID/35585/p/48903, 49902,71663,71664/c/65,67/kw/recovery%20using%20f10
  Sony VAIO Vista: Restart and press "F8" repeatedly until the screen "Advanced Boot Options".
  https://us.en.kb.sony.com/app/answers/detail/a_id/41931/~/how-to-perform-a-system-recovery-using-the-vaio-recovery-center.
  https://us.en.KB.Sony.com/app/answers/detail/A_ID/41949/session/L2F2LzEvdGltZS8xNDA4MjI2NTAzL3NpZC8qWVBPbCpfbA%3D%3D
  Support: http://www.sony.net/SonyInfo/Support/

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643
  Support: http://www.toshiba.co.jp/worldwide/

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Automatic unlocking with Apple Watch active but expire

  I've activated automatic unlocking on my Mac (Macbook Air 6.1) successfully, I had my first gen Apple Watch upgraded to watch OS 3 and when I opened my Macbook, it says «Unlock with Apple Watch...» ». After a few seconds, however, I get a spinny wheel thought and then it expires and I get the password prompt. I tried to restart my Mac and my watch, but don't know what else to do here?

  As far as I know I have everything set up properly - 2-factor authentication, the right operating system, the hardware supports, but it just times out. Anyone have any idea why this could be or a potential solution?

  Seems that you have all your ducks in a row, but check the instructions here > http://www.cultofmac.com/441405/how-to-use-apple-watch-to-unlock-your-mac-in-mac os-sierra /

• Problems with the Windows Activation on the satellite A110-252

  Hello

  Ive recently bought a Toshiba Equium A110-252 without recovery disks. I tried to install with a Windows XP Home OEM edition discs but after installtion that he used to connect on windows without be activated everything first. I tried activatingit through my network and it has activated, but when I try and log in again, he asks to be reactivated. What can I do?

  Thank you

  The first thing we do is to contact your dealer and provide your laptop comes without recovery media. Please clarify this as soon as possible.

  With each CD facilities, there must be key activations. You try to use the activation key of the label on your laptop?

• How do I restore my apple ID after I lost contact with my original activation id (the one I used to activate the phone (iphone 5 s) initially)

  I have an iPhone 5s which I locked using 'find my iPhone' with the apple ID * gmail.com.

  in order to unlock my iPhone, I need of the apple I used for activation, which I don't remember ID, I removed the lock 'Find my iPhone' in the 26.1

  but when I open my phone yesterday asking apple ID to activate my iPhone...

  p.s

  I have the original with the IMEI label box...

  Help, please

  < images and contact information and Email published by host >

  If you don't remember that Apple ID and password, you just present the original invoice, indicating your name, the name of the dealer, date of sale and the series/IMEI number # etc. to Apple.

• Plugged in, do not question of burden with windows Lenovo Yoga2 Tablet

  Hi all

  Need help with my windows lenovo yoga2 tablet. It shows the message as "plugged in, not load ' and the battery goes down to zero. Unable to fix earlier discussed using solutions since my battery cannot be purchased.

  Kind regards

  Riou

  The problem is solved finally. The culprit was the cable that came with the pack of USB. I replaced it with my Moto X cable that is thicker than that which is expected and my tablet started to load

• Guide: replace the HDD with SSD, Lenovo Y480

  Lenovo
  That's how I replaced my HDD with a SSD in my Lenovo Y480. I did it immediately, so there is no user file to consider. I used a key from Lenovo recovery. Read this guide in its entirety before starting.

  Execution time: about an hour.

  Items, you will need:

  -Y480 Lenovo

  -New SSD (I chose a Mushkin Chronos Deluxe because my research lead me to conclude that it is the best available from June 2012)

  -Small Phillips screwdriver

  -Butter knife or similar to remove the HARD drive. There is not much space for your fingers in there.

  -DVD-r blank

  Step 1

  Turn on the computer.

  Step 2

  Write the number '1' on a blank DVD-R and insert into the optical drive.

  Step 3

  Press the small button just to the right of the power button. This launches a recovery key.

  Step 4

  Follow the instructions on the screen to make restore disks. I chose the factory restore option, which required three DVD - Rs. label each disc with numbers to let you know in what order to use them later. Once it is finished, place back #1 DVD into the optical drive.

  Step 5

  Physically remove the hard drive and insert the SSD drive by following the instructions below.

  1. turn off and unplug your computer, flip upside down.
  2. remove the battery.
  3. remove the access panel by removing the two screws and slide.
  4. remove the two screws that hold the hard drive carrier.
  5 remove the hard drive by lifting upward. There is a right angle SATA adapter plugged into the hard drive. This card just came out with the hard drive.
  6 disconnect the hard drive adapter and plug it on the SSD.
  7 unscrew the hard drive bracket and screw it on the SSD.
  8 put the SSD drive in the Bay, screw the support down and replace the access panel. Be sure to screw it up.
  9. replace the battery, lock.

  Step 6

  If you did not already the first recovery DVD in the optical drive, use a paper clip to open the optical drive and insert the diskette. Close the drawer, then turn on the computer to start the restoration.

  Step 7

  Select the boot drive by pressing F12 when you see the Lenovo logo during startup, and then select the optical/DVD drive in the list.

  Step 8

  Follow the instructions on the screen. The first time that I did, restoration impossible immediately, probably because of a missing partition. However, after restarting the computer by performing a battery pull, then continue to step 6 restore completed successfully.

  I have not compared this drive, but I can tell you that the Windows experience index is 7.9 and startup time is 24 seconds now. The base index is 6.8 for this system now.

  You will find that Windows has already helped TRIM. However, regular defragmentattion was still on. I think that the system restore has been disabled automatically.

  Good luck

  Matt

  I saw no option for this, and I was quite surprised, that he didn't do it automatically. I'm not an expert on everything, so what follows is a guess.

  Perhaps that if you create a partition on the SSD first, recovery will recognize and use it.