Switch 10 Acer work with stylus?

Similar Questions

• Safe on Etherchanel / 802.3ad, it works with vmware esx?

  Trunk etherchanel in cisco switch configuration, it works with vmware esx?

  Configuration of the Cisco switch like that (I don't have a switch, can not test it):

  src-dst-ip port-channel load-balance
  the interface vlan 4094
  no ip address
  Interface Port - Channel 1
  switchport
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk allowed all the VLANs
  switchport trunk vlan 4094 native
  no ip address
  interface GigabitEthernet1/1
  switchport
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk allowed all the VLANs
  switchport trunk vlan 4094 native
  no ip address
  Chanel-Group 1 mode on
  interface GigabitEthernet1/2
  switchport
  switchport mode trunk
  switchport trunk encapsulation dot1q
  switchport trunk allowed all the VLANs
  switchport trunk vlan 4094 native
  no ip address
  Chanel-Group 1 mode on
  end

  What you have should work OK, because it is not too different from the example of work from my lab:

  ocs4948-1 #sh int item in gi1/2nd round

  Building configuration...

  Current configuration: 536 bytes
  !
  interface GigabitEthernet1/2
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2.10
  switchport mode trunk
  MTU 9198
  channel-group 64 mode on
  spanning tree portfast
  spanning tree enable bpduguard
  end

  ocs4948-1 #sh run int item in gi1/6

  Building configuration...

  Current configuration: 536 bytes
  !
  interface GigabitEthernet1/6
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2.10
  switchport mode trunk
  MTU 9198
  channel-group 64 mode on
  spanning tree portfast
  spanning tree enable bpduguard
  end

  ocs4948-1 #sh run int in64

  Building configuration...
  Current configuration: 291 bytes
  !
  Interface Port-channel64
  Description esx402 LACP link
  switchport
  switchport trunk encapsulation dot1q
  switchport trunk allowed vlan 2.10
  switchport mode trunk
  MTU 9198
  load-interval 30
  Storm-control broadcasts 5.00
  spanning tree portfast
  spanning tree enable bpduguard
  end

  ocs4948-1 #sh int trunk

  VLAN Mode Encapsulation native port State
  In64 on 802. 1 q trunking 1

  Port VLAN allowed on trunk
  In64 2.10

  Port VLAN authorized and active in the field of management
  In64 2.10

  VLAN port extending on transmission State and no tree pruned
  In64 2.10

  The only thing to look at will be the VLANs that you got set up on the vSwitch. You have defined VLAN native example, the VLAN untagged on the switch to be 4094, any traffic sent on the aura tags trunk VLAN, which will be removed by the vSwitch.

  In my setup, I have established groups of ports using VLANS and VLAN 2 10. Traffic to the virtual machines on these VLANs are .1Q marked by the physical switch, which is then stripped by the vSwitch.

  Take a look at the section "VLAN in VMware Infrastructure" on page 7 the concepts of virtual networking André already mentioned, but also the other interesting reading material is http://www.vmware.com/pdf/esx3_vlan_wp.pdf.

  Finally, for the side of the switch of things, look at the examples on Scott Lowe's blog at http://blog.scottlowe.org/2006/12/04/esx-server-nic-teaming-and-vlan-trunking/.

  Concerning

• Satellite A110 - switch WiFi does not work with the new WiFi card

  Hello everyone

  I have a problem with my laptop Toshiba Satellite A110 - 178 (PSAB0E). I replaced the original Intel 3945abg with Intel Link 5100 WIFI card and on the new wifi hardware wifi card switch does not work.

  New wifi card is discovered and drivers to the correct job but when I try to search with the Intel Pro/Wireless software wifi networks I message to turn on hardware switch, but there light and not work. The old wifi card swich works OK - orange light is on. On the new map light is off and swich does not work.

  Help, please

  Hello

  Do you have also enabled the WLAN functionality by pressing FN + F8?
  Check it!

  In addition, I think the case is clear: the new wireless LAN card isn't compatible with Satellite A110.
  So in my opinion, you must use remove the new card Intel and install the old card that works fine in your laptop.

• find a stylus that works with 7 Stream

  I bought a tablet of 7 streams and then that is pretty nice, the standard windows desktop controls are too small to use with my finger or a stylus tip rubber. Will be something like the active stylus HP pen (product # J4R51AA #ABL) work on the 7 flow?

  Thank you!

  Hello

  You will need to look for a pen that works with a capacitive touchscreen.  The Active pen requires special technology that the 7 flow has not.

  For more information, please see here: http://www.styluscentral.com/Capacitive-Touch-Screen-Technology.html

• DVD player does not work with Windows 10 on Acer Aspire 5553 G

  DVD player does not work with Windows 10 on Acer Aspire 5553 G. I waited for a fix of Windows a whole year now and I have tried several fixes that didn't work. Are there new solutions for this problem?

  http://community.Acer.com/T5/Windows-10/5553g-Windows-10/TD-p/375386/page/2

  

• Acer XC-605 does not work with VGA monitor

  I just bought it, SNID is *. I may have made a mistake, as I bought it without a new screen, thinking the old man I would have worked.

  My monitor is an HP w2007v with a VGA port. There is a VGA port on the back of the Acer tour, I thought that there should not be a problem, but there are. My monitor says that he receives no signal from the computer. What I need to get a new HDMI monitor, or she would work with an adapter HDMI / VGA?

  If I have to buy a new monitor, which is better to connect it to the computer? The installation sheet short I said can I use DVI, VGA or HDMI, all the same, but this is not the case. I would say there was a small cap on the the computer's VGA port, but it was not written on the box that I couldn't use it. I thought it was a protection for the transport. So, why is there a VGA port if I can't use it?

  [private under the leadership of life]

  So, I don't know a lot about the HP monitor, but I hope I can help to explain what you're looking at.

  I have attached a picture of the back of an AXC-605, there may be slight differences, but overall, it should look familiar.

  Let me start by explaining what is the VGA port on this system. Almost every Office mainboard has a VGA port available. This is because the video is a requirement for the P.O.S.T. process. The reason why it is not used is because the unit has a dedicated video card which is more powerful and the system is configured to use this dedicated card and not to provoke a conflict with the built-in VGA port. Is it possible to use the VGA port? Probably, but you lose a lot of performance with the sytem.

  The image options are highlight in slot 13, HDMI and DVI. The best way to connect a VGA monitor would be with DVI to VGA connector. Those who are about $ 3-5 in the States.

  Hope this helps,
  Cory

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• Reference Dell Touch P2314T - working with active stylus?

  I bought this touchscreen monitor, because I wanted a bigger workspace for the drawing. I used 3 Surface with Pen of Surface until now, but I wanted a bigger screen. So, I bought a monitor Dell Touch P2314T. I was wondering, is it possible to use this monitor with the active stylus Dell here?

  I want to know if the monitor works with the stylus, and if the pressure and palm rejection sensitivity will be sustained. Thank you in advance.

  I do not know. You'll need to read through the Manual for touch screen monitors find these data.

• How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

  Original title: How can I get a driver for an Epson Stylus Photo 950 printer that works with Windows 7?

  It is not listed in the list of printer drivers and I can't find anywhere on the web.

  Hello

  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-950/drivers-support?target=article&Extn=.html&articleid=3394

  This article from Epson says that the driver is included in Windows 7.

  I don't see any info out there that clearly explains how to add it.  It simply States that you must go to "add a printer".  Looks like you already did this well.

  I would say following upward with support from Epson to see if they can offer some better instructions. Want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Monitor all-in-one Epson Stylus CX3900 printer ink does not work with win 7

  Ink monitor does not work with win 7. It is connected to a pc win 7 and the ink monitor does not work on the two win xp computers on the same network.

  There are Windows 7 drivers here...

  http://tech.Epson.com.au/downloads/category.asp?sCategory=Multi_Functional&ID=styluscx3900&SelOS=Y

  Have you tried?

  Generally, functions such as ink levels work only on the host with the full support of the package installed and is not available for all computers that are connected to the host of the printer.

• How to switch my Acer Aspire One ZG5 model of Win XP to W7?

  How to switch my Acer Aspire One ZG5 model (model 2008) from Win XP to W7?

  I have 1.5 GB of RAM and 160 GB HD. What version of W7 can agree?

  You will appreciate any help/advice - thanks.

  It is clear looking for throough this forum helps a lot of people - there are several questions that no one has offered any sort of a response/answer - it seems hardly useful.

  In any case, I answered my own question: I just connected a USB DVD drive and ran the drive of W7 patch and everything was fine. He did take a lot of time for all updates to load, but there is no real problems. W7 works very well with 1.5 GB of memory.

  Good day!

• Third monitor does not work with Eyefinity more

  I am trying to run 3 monitors on my ATI HD 5770

  I have two computers that, for years, have worked with several thin monitors... until very recently.  Through all my updates to the OS, they continued to work.  I don't remember exactly at what time each card has ceased to power its third monitor.  Each of my "third monitors" would come on periodically until they all finally stopped.

  All monitors are working fine as I juggle the cables and adapters each refreshes and lights up but not all at the same time.

  Here's what I have available for troubleshooting.

  I have two Mac Pros below.  (OS 10.11.6) on one and (OS 10.7.5) on the other.

  Each tower has (2) 5770 cards installed that each have a DVI and 2 mini ports.

  So I have a total of (4) cards and is starting the new one that I got on ebay last week.

  I have LG E2350V 23 "monitors (6) and (3) 22" ACER monitors

  All my cables are active and I have several active adapters

  I just bought some passive extra and many very active adapters to the experience and trouble shooting with.

  Thanks in advance for the help and time!

  DisplayPort and its variant electrically identical but small size Mini DisplayPort and the implementation which is a subset of Thunderbolt, any differential use (push-pull) of signals pilot very low voltage. They are MORE immune to noise than old methods because the signal is encoded on the difference between the two signals, not a single signal referenced to a "everybody" on the ground. If possible, you must connect all screens with DisplayPort [full-size] or Mini DisplayPort. These put a lot less load on your system.

  When you convert this very low level signal to an "inherited" display, the map is short of ability to directly signal levels in the car high enough to be recognized after connection of TWO monitors legacy of any kind. If you choose to use a DVI or HDMI port supplied directly, that still counts as one of your two "free" conversions (It is also possible that a very fussy display is moved even earlier).

  All display "legacy" beyond the first two requires ACTIVE description adapters. Adapters ASSETS contain re-drivers of signal and are therefore more expensive than ordinary adapters. Typical prices are of the order of $ 40, but competition has lowered some prices slightly. Mini DisplayPort has a descendant-comparability mode requested by the regular cards, who can get to produce a Single-Link DVI signal to up to 1920 wide, but a regular adapter not pushed the signal levels.

  The Apple Mini DisplayPort to DVI Dual-Link, which is used for DVI displays wider width of 1920, is more complex and expensive and requires extra power beyond all signal re-pilots. This power is usually taken on a tail of pig USB, USB data are generally not used by the adapter, so a different USB power source can be overridden.

• The iPhone model A1662 can work with T-Mobile and Verizon?

  I never had an iPhone and am looking to buy the 16 GB iPhone model. Currently my carrier is T-Mobile, but because of problems of coverage in a rural area, I might want to switch to Verizon. I'm in a family plan so have other members to consider.

  (1) the same phone will work with both carriers, if I buy an unlocked model of Apple?

  (2) I will be able to use WiFi calling if I buy the unlocked model of Apple?

  (3) are there other things for me to consider? Of course, I'm a beginner with the iPhone (although use a 3rd gen iPad), so I probably don't need the fancy options for a long time. I could on vacation outside the United States, however, is why call WiFi can be important.

  Thank you very much for your advice.

  Check out these two items and search for your provider and model:

  http://www.Apple.com/iPhone-se/specs/

  http://www.Apple.com/iPhone/LTE/#iPhone-se

  http://www.Apple.com/shop/buy-iPhone/iPhone-se (FAQ section)

  • Are there differences between an iPhone for AT & T or T-Mobile and iPhone for Sprint or Verizon Wireless?

    iPhone offers the same innovative characteristics regardless of the mobile phone service provider you choose. If you choose AT & T or T-Mobile as your mobile phone provider, your 6s, 6s iPhone iPhone, iPhone 6, iPhone 6 more or SE iPhone will use cellular technology GSM cellular technology GSM or LTE for data services and voice services. All these devices can roam internationally on several GSM carriers worldwide. See below for more details. If you choose Sprint or Verizon Wireless as your mobile provider, iPhone, iPhone 6 s 6 s, iPhone 6, iPhone 6 more or SE iPhone will use CDMA cell phone technology for voice services and cellular CDMA or LTE technology for data services. A 6s, 6s iPhone iPhone more, iPhone 6, iPhone 6 more or SE iPhone activated on Sprint or Verizon Wireless also has the ability to walk on GSM networks internationally using the SIM card provided. For more information about support of the LTE network, please visit www.apple.com/iphone/LTE.

  • What iPhone model number come from SIM-free?

    Model A1662.

• DownloadHelper will not save youtube either 0 bytes or 1.6 MB working with other sites

  For about 3 weeks, youtube has not been able to download other sites dailymotion etc I can't save.downloadhelper works on my Acer laptop with vista
  Also, I tried to post in forum downloadhelper can't seem to post there

  Just got this downloadhelper

  Since version 4.9.9 to 4.9.10

     After some changes in YouTube on September 14th, Video DownloadHelper was not able to download any video from this site, except the WEBM version while using the YouTube HTML5 mode. This is fixed in this addon version.
     After some changes in YouTube on August 6th, a number of users reported that all downloads were failing. This was caused by a a Youtube-generated cookie. The workaround consisting of clearing the cookies before downloading was not very convenient. This addon version takes care of that issue.
     Earlier this year, some other changes at YouTube caused the FLV videos downloaded through the "network" method to have a fixed 1.7MB size and being unplayable. This is now taken care of.
  

• The new silent update works with Standard user accounts?

  For security reasons, I use a standard windows instead of one admin user account.

  I actually initially stopped using firefox and switched to chrome because it refused to auto-update when logged in as a standard user.

  I hear that Firefox now has a silent update like Chrome.

  This silent update allows to auto-update when you use a standard account of Firefox?

  Obviously I can't switch back to Firefox completely unless the update feature works with standard accounts

  not yet unfortunately. You can keep an eye on the bug mentioned in the wiki of mozilla to see when the State becomes fixed...