Remote access to databases using ODBC connector

Similar Questions

• Configuration remote access VPN (IPSec) using FULL domain name

  Hi friends of Cisco,

  We have the DNS (only the internal IP) within our network, right now that we have configured VPN for remote access using public IP address and connect us with the same public IP address. I need help to use the domain name FULL rather than use public IP.

  Can you please provide the configuration for this.

  Feature: ASA 5520

  Type of configuration: IPSec

  Thank you

  Estel

  Hi Philippe,.

  You can use one of the free Web of DNS dynamic sites and configure ASA to dynamic DNS.

  Reference - http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html

  HTH,

  -Dieng

• Implementation of the remote access VPN IPSec using SRI 2801

  Hello

  I tried to set up a VPN for remote access using 2801 SRI. I've been able to establish my house vpn tunnel using the DSL (behind a NAT) connection, give it SRI the IP address that is in the ip pool I configured on safety. The problem I have right now is that it does not reach the company LAN network.

  DIAGRAM:

  MODEM PC (VPN CLIENT) ADSL - ROUTER SOHO - INTERNET - ISR2801 - LAN---(10.10.0.27&192.168.0.9) COMPANY

  PC: 172.16.10.122

  SOHO ROUTER LAN IP: 172.16.10.254

  SOHO ROUTER WAN IP: Dynamically assigned by ISP

  ISR2801 WAN IP: x.x.x.5/224

  IP LAN ISR2801: 10.10.0.50/24

  The CORPORATE LAN subnet: 10.10.0.0/24 and 192.168.0.9/24

  2801 SRI CONFIGURATION:

  AAA new-model

  !

  !

  connection of AAA NOCAUTHEN group local RADIUS authentication

  local NOCAUTHOR AAA authorization network

  !

  !

  IP domain name xxxxx.com

  !

  !

  !

  username root password 7 120B551806095F01386A

  !

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto 5 40 keepalive

  ISAKMP crypto nat keepalive 20

  !

  Configuration group isakmp crypto-GROUP NOC client

  touch [email protected]/ * /! ~ $ 9876 qwerty

  DNS 192.168.0.9

  192.168.0.9 victories

  xxxxx.com field

  LWOP-pool

  include-local-lan

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set AC - SET esp-3des esp-sha-hmac

  !

  dynamic-map crypto NOC-DYNAMICMAP 10

  transformation-LWOP-SET game

  !

  !

  list of crypto AC-customer card NOCAUTHEN card authentication

  list of crypto isakmp NOCAUTHOR AC-card card authorization

  crypto map CNP-map client configuration address respond

  Crypto map AC - map 10-isakmp dynamic ipsec AC-DYNAMICMAP

  !

  !

  !

  !

  interface FastEthernet0/0

  IP address x.x.x.5 255.255.255.224

  Speed 100

  full-duplex

  card crypto AC-map

  !

  interface FastEthernet0/1

  IP 10.10.0.50 255.255.255.0

  Speed 100

  full-duplex

  !

  local IP NOC-POOL 192.168.250.101 pool 192.168.250.110

  IP route 0.0.0.0 0.0.0.0 XXX1

  IP route 10.10.0.0 255.255.255.0 10.10.0.10

  IP route 172.16.10.0 255.255.255.0 FastEthernet0/0

  Route IP 192.168.0.0 255.255.255.0 10.10.0.10

  IP route 192.168.250.0 255.255.255.0 FastEthernet0/0

  !

  I have attached a few screenshots. My goal here is to have access to my LAN to the company (10.10.0.0/24 and 192.168.0.9/24). I don't know what is missing here.

  No, we don't need not NAT. wanted to confirm if NAT could cause this problem.

  The config looks good. Can you ping routers ip internal interface the client LAN once it connects?

  Are correct, w.r.t. transatlantic lines reaching pool behind router VPN?

  If so, I would like to take a look at the exits following when a client is connected.

  See the crypto eli

  ISAKMP crypto to show his

  Crypto ipsec to show his

  SPSP

• How can I remotely access my XP using mobile phone?

  I want to remote control my XP at home thanks to the mobile device,

  someone has suggestions on how to set up the network?

  Thanks in advance for your suggestions

  Download a remote desktop for any phone application you have.  Configure your Windows XP computer (Professional?) the same way you would if you use another computer remotely in it.

  Make sure that routers and firewalls allow the appropriate ports to pass through or transfer.

  Configuration of Windows XP Pro Remote Desktop, usage and help and trouble shooting tips

• VPN remote access with router 2610

  Guys,

  A router Cisco 2610 series with IOS Version 11.3 (2) software version XA4 (fc1) will support a VPN remote access VPN Clients using standard Windows (LT2P on IPSec or PPTP) via a connection of Remote LAN-based access to wide band.

  I have bought this device and need an answer fast if possible.

  Thank you 1 million.

  Vito

  The navigation feature is the ideal tool for this:

  http://Tools.Cisco.com/ITDIT/CFN/JSP/index.jsp

  Search by function and enter PPTP and you will see he came to 12.2 code.

  Do the same for L2TP and you will see he came in 12.1 T code.

  The short answer is no.

• Problems with remote access IPSec VPN

  Dear Experts,

  Kindly help me with this problem of access VPN remotely.

  I have configured remote access VPN IPSec using the wizard. The remote client connects to fine enough seat, gets the defined IP address, sends the packets and bytes, BUT do not receive all the bytes or decrypt packets. On the contrary, the meter to guard discarded rising.

  What could be possibly responsible or what another configuration to do on the SAA for the connection to be fully functional?

  It can help to say that Anyconnect VPN is configured on the same external Interface on the ASA, and it is still functional. What is the reason?

  AnyConnect VPN is used by staff for remote access.

  Kindly help.

  Thank you.

  Hello

  So if I understand correctly, you have such an interface for LAN and WAN and, naturally, the destination networks you want to reach via the VPN Client connection are all located behind the LAN interface.

  In this case the NAT0 configuration with your software most recent could look like this

  object-group, LAN-NETWORKS-VPN network

  network-object

  network-object

  network-object

  network of the VPN-POOL object

  subnet

  destination of LAN-NETWORKS-VPN VPN-NETWORKS-LAN static NAT (LAN, WAN) 1 static source VPN-VPN-POOL

  Naturally, the naming of interfaces and objects might be different. In this case its just meant to illustrate the purpose of the object or interface.

  Naturally I'm not sure if the NAT0 configuration is the problem if I can't really say anything for some that I can't see the configuration.

  As for the other question,

  I have not implemented an ASA to use 2 interfaces so WAN in production environments in the case usually has separate platforms for both or we may be hosting / providing service for them.

  I imagine that there are ways to do it, but the main problem is the routing. Essentially, we know that the VPN Client connections can come from virtually any public source IP address, and in this case we would need to default route pointing to the VPN interface since its not really convenient to set up separate routes for the IP address where the VPN Client connections would come from.

  So if we consider that it should be the default route on the WEBSITE of the ASA link, we run to the problem that we can not have 2 default routes on the same active device at the same time.

  Naturally, with the level of your software, you would be able to use the NAT to get the result you wanted.

  In short, the requirements would be the following

  • VPN interface has a default route, INTERNET interface has a default route to value at the address below
  • NAT0 between LAN and VPN interface configuration to make sure that this traffic is passed between these interface without NAT
  • Interfaces to special NAT configuration between LAN and INTERNET which would essentially transfer all traffic on the INTERNET interface (except for VPN traffic that we have handled in the previous step)

  The above things would essentially allow the VPN interface have the default route that would mean that no matter what the VPN Client source IP address it should be able to communicate with the ASA.

  The NAT0 configuration application would be to force ASA to pass this traffic between the LAN and VPN (pools) for VPN traffic.

  The special configuration of NAT then match the traffic from LAN to ANY destination address and send to the INTERNET interface. Once this decision is made the traffic would follow the lower value default route on this interface.

  I would say that this isn't really the ideal situation and the configuration to use in an environment of productin. It potentially creates a complex NAT configuration such that you use to manipulate the traffic instead of leave the mark of table routing choice in the first place.

  Of course, there could be other options, but I have to test this configuration before I can say anything more for some.

  -Jouni

• How can I remotely access an xp 32-bit sp3 via computer win7

  I have a laptop running win7 home edition attached to a home network and would like a computer on the network that is running the remote access XP SP3 32 - bit OS... Have implemented XP machine for remote access and can use the printer to win7 mach.  but when itry to remote access using win7 via execution stmsc.exe and type in the URL, it is equivalent to checking if mach is on, remote access and it is on the network.  They have anti-virus running on two machs.  Any ideas.

  Yes, for family XP Edition remote access, you will need a third party program. Boulder computer Maven
  Most Microsoft Valuable Professional

• Create odbc connection between local access and remote access or sql remote

  I need to connect to a remote access or sql database using my local in access 2007 version.  I can't understand what I put in each of the available boxes.  I see only a SQL driver to the system section of the odbc Wizard.  If I decide that he wants to know where the sql server is... well, it's not local, I have a web address for this and may not know how to get the systΦme can recognize the information remotely.  Help, please!

  Means of access:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://social.answers.Microsoft.com/forums/en-us/addbuz

  Access support at the link above.

  They will help you with your questions of access when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• .Mdb MS Access using ODBC connection failed to resolve ORA-12154 connection identifier

  Dear all,

  I am using the MS Access file .mdb as the source of my request for OWB. I need to connect to the ms access .mdb file first using odbc. This is the step that I do:

  1. define the ODBC connectifity

  Control Panel-> admin tools-> data-> system-> add DSN sources

  Select Microsoft Access Driver (*.mdb)-> Finish

  Data source name: msaccess-> database: Select-> location of the file .mdb (C:\MSAccess\att2000.. (MDB)

  2 configure the listener

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (SID_NAME = CLRExtProc)

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (= Extproc PROGRAM)

  (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Administrator\product\11.2.0\dbhome_1\bin\oraclr11.dll")

  )

  (SID_DESC =

  (SID_NAME = msaccess

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = hsodbc)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  )

  (SID_DESC =

  (SID_NAME = msaccess

  (ORACLE_HOME = C:\app\Administrator\product\11.2.0\dbhome_1)

  (PROGRAM = hsodbc)

  )

  )

  ADR_BASE_LISTENER = C:\app\Administrator

  3 Configure Oracle HS

  File name Initmsaccess.ora

  #

  # HS init parameters

  #

  HS_FDS_CONNECT_INFO = msaccess

  HS_FDS_TRACE_LEVEL = 1

  #

  # Required for the non-Oracle system environment variables

  #

  #set < varenv > = < value >

  4 edit tnsnames.ora

  Msaccess =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))

  (CONNECT_DATA =

  (SID = msaccess)

  (SERVICE_NAME = msaccess)

  )

  (HS = OK)

  )

  5. create the database link

  create the link msaccess database using "msaccess";

  6 execute a query to test the connection

  SQL > select * from departments@msaccess;

  ERROR on line 1:

  ORA-12154: TNS: could not resolve the connect identifier specified

  I check the AMT using msaccess tnsping, it returns

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos)

  (t) (PORT = 1521)) (CONNECT_DATA = (SID = msaccess) (SERVICE_NAME = msaccess)) (HS = OK)( )

  OK (120 MS)

  Any body knows how to solve this problem?

  Best regards

  Akhmad H Gumas

  Akhmad,

  just to confirm that I understood:

  You have an Oracle database and the bridge installed on your machine. The database and the bridge are all part of this Oracle_Home: C:\app\Administrator\product\11.2.0\dbhome_1

  Fix?

  When you look at your listener.ora file it lack a right bracket:

  (SID_NAME = msaccess

  => should be (SID_NAME = msaccess)

  Once done, please STOP and START the listener.

  Then open a command line window and type:

  Set ORACLE_HOME=C:\app\Administrator\product\11.2.0\dbhome_1

  Status of C:\app\Administrator\product\11.2.0\dbhome_1\bin\lsnrctl

  C:\app\Administrator\product\11.2.0\dbhome_1\bin\dg4odbc

  C:\app\Administrator\product\11.2.0\dbhome_1\bin\tnsping msaccess

  And copy and paste the output of each command.

  -Klaus

• backup remote database using rman

  Hi all
  
  I have a prod (11.1.0.6.0) servers on Windows 2003 R2 64 bit.
  
  Name of the server (PRODDB)
  
  I want to take rman backup of my client machine and also I want to save the backup in my client machine file itself rather save in the server machine.
  is it possible, and if 'YES' then can someone suggest me how can be possible?
  
  
  Thank you and best regards,
  John of Vikash

  Vikash Jain (trainee DBA) wrote:
  Hi all

  I have a prod (11.1.0.6.0) servers on Windows 2003 R2 64 bit.

  Name of the server (PRODDB)

  I want to take rman backup of my client machine and also I want to save the backup in my client machine file itself rather save in the server machine.
  is it possible, and if 'YES' then can someone suggest me how can be possible?

  Thank you best regards &,.
  John of Vikash

  If you are able to access the RMAN utility from your client machine and you are able to access the database (Production) target of your client machine, then you should be able to take backup of the client machine but backups would not be stored on the client computer. Backups are stored on the target server (PRODDB) only. Even if you try to take backups using the format specifier, the path is enabled on the target server and if not found, then RMAN throw out error.

  You must have a disk that is shared and accessible from your target server and the client computer.

  Refer to this http://arjudba.blogspot.com/2008/10/how-to-take-rman-backup-on-remote-disk.html

• How to use oracle APEX remote with a database located on a remote server

  Hello
  
  I am a new user with the Oracle Technologies. I installed ORACLE 10 g XE and APEX upgrade version 4.0 on my laptop.
  My Manager has setup a remote server with a Linux Red Hat. He has installed on this server EBS R12 with a 11i database.
  
  As a training, I would like to play with the tables on the server with APEX 4.0 installed on my laptop.
  The server is on the same local network and as a result of the description above, it is possible to connect my local APEX in the database?
  
  If this is not the case, this means that I have to install APEX on the 11i Server database, and then connect to the server to play with these tables?
  
  Thank you very much for your time and support the members of the CCSE.
  
  Kind regards
  
  Ulrich

  Hi, Ulrich,.

  Yes, you can access another database from your database to the APEX. The mechanism used for this is called a "database connection". You create such a link of database in your local database, then you can access remote data like this:

  SELECT *
    FROM databaselink@EMP
  ;
  

  If you want to use remote objects in APEX you create local views to encapsulate this (search the forum for apex and database links, you will find some interesting discussions).

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  BuilderPlugin: http://builderplugin.oracleapex.info
  Work: http://www.click-click.at

• My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  My camera iPhone 5s is accessed remotely? Whenever I use my phone torch ends up taking videos. Is it possible for a person to access my camera through the torch. We share the same Apple ID

  N °

  but maybe you tap the camera icon (bottom-right) when you press the icon of the torch (with the other hand maybe?)

• I have a SSIS package that uses ODBC to connect to a progress database that does not work in SQL Agent

  I have a SSIS package that uses ODBC to connect to a Progress database.  It works fine in Visual Studio and it works very well in a batch file calling DTEXEC from the Windows Task Scheduler, but it does not work in the work of the SQL Agent.  It says that it cannot find the driver information.

  Hi Curt_DBA,

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums (SQL Server Integration Services).

  MSDN Forum (SQL Server Integration Services)

  http://social.msdn.Microsoft.com/forums/en-SG/sqlintegrationservices/threads

  I hope this helps.

• Bad VPN ASA injection road on OSPF when using remote access

  Has anyone ever seen the ASA by inserting a bad road in a connection that has been set up with it?  I'll explain more below:

  I'm using a reverse road Injection. When access remotely with IPSEC (CLIENT) connects to the camera ASA, ASA create a static route to the remote access to the closest router for the SAA to come to this remote access. This itinerary is distributed on OSPF. OK, it may be a normal situation. But, the problem is when I ask another participant of this OSPF area, which is the road to this remote access (CLIENT), the answer is the router closer to the ASA and don't have to ASA. Does anyone have a solution for this? I tried to create a roadmap but that you did not.

  If I understand your question, my question for you is whether the OSPF route to the remote VPN client is source by ASA or another device?

  Is the IP address in the space I wrote ASA_ROUTER_ID ASA router ID or it is the router from another device ID?  What I've listed below are an example of the output of "show ip route.  The value in bold must be ASA router ID, if she is from the road to the VPN client.  Other OSPF routers will forward packets destined to VPN to ASA client.

  #sh ip route 1.1.1.0
  Routing for 1.1.1.0/24 entry
  Known through the "ospf 1", metric 110, distance 310, type intra zone
  Last updated on GigabitEthernet0 1.2.2.2, 2w there
  Routing descriptor blocks:
  * 1.2.2.2, ASA_ROUTER_ID, there is, through GigabitEthernet0 2w
  Path metric is 310, number of shares of traffic 1

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached