Plugged in, do not question of burden with windows Lenovo Yoga2 Tablet

Similar Questions

• Pavilion G6 2303-TX: plugged in, do not question of burden

  After connecting the charger connected display, do not load...
  its getting charged in the stop mode.

  Hello

  Try the following.

  First, shut down the laptop, unplug the power adapter, remove the battery and then hold the Power button for 30 seconds.

  Now, plug in the AC adapter without the battery inserted, start Notepad, open windows control panel, open Device Manager, expand the entry for the battery, on the right, click on and compatible Microsoft ACPI control method battery and select Uninstall - do uninstall not something else here.  When the uninstall is complete, shut down the laptop, unplug the AC adapter, reinsert the battery and then reconnect the AC adapter.

  Start Notepad - Windows will automatically reinstall the driver.

  Kind regards

  DP - K

• Plugged in, not charging on 6% with windows 7 ultimate

  Hello everyone

  Hi have the same problem with the guys here.

  I have a laptop Acer Aspire 5738 G with windows ultimate 7 installed.

  I tried all the tricks on the forum as stop the computer, remove the battery, remove AC power, hold on the power button for 10-20 sec and replacement battery and does not work for me.

  The message is 6% available (plugged in, not supported)

  If I remove the ac computer automatically stop as if was a blackout... as if my battery wasn't there.

  I tried the trick on this page, but does not work for me.

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/d338d4c6-865a-49a3-8333-8c30e989a4f8

  Is there any solution for this?

  Thank you

  The battery compartment is broken I had it before on an acer laptop and I rang acer support and they put in the new housing of the battery and it worked.

  They said that a sector in the slot was broken.

• Lost all info and did not have a copy with Windows anytime upgrade

  I have no info at all and as an elderly person without brains did not have a copy of my info. Guess Im outa luck eh?

  Could you describe the problem you're having with Windows Anytime Upgrade?

  Windows 7 - Anytime Upgrade - frequently asked Questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• A6210 not taken in charge with Windows 8.1

  After several times being hung up, including waiting to talk to a supervisor, it is what I said.

  Netgear material: R8000, E7000 Extender, A6210 adapter wireless router

  I bought an A6210 6 weeks to run on my Windows 8.1 desktop and have had several problems - to connect to a router R8000, when I try to use 5G, the adapter disconnects and can't find no matter what networks until I reboot my system. 2G seemed to be ok most of the time, but a flow would greatly suffer any time I tried to connect 5G and back to 2G - wouldn't recover until I started.

  So, I filed a support case (25255972) and was given instructions on uninstall/install drivers and device - even though I was already running the current drivers. Does this - sort of - installation would never end. Then I called support and as soon as I mentioned that I was running 8.1, I said he had a problem with my machine (they had a lot of people with the same problem with Windows 8 and 8.1) and 'we' would have to modify the configuration settings - but ONLY if I signed up for a bunch of paid support.

  Anyone else having the same problems? Maybe another seller is in order if it is to get good customers.

  Oh and I forgot to mention, I left it the adapter plugged in all the time during the windows reinstall, then installed the stand-alone driver.

• questions about compatibility with windows xp ms broadband network

  Not able to connect with the wireless network. Raise this message at startup:

  Microsoft Broadband Networking has a compatibility issue with this version of Windows. For a compatible with this version of Windows Update, contact Microsoft Broadband Networking.

  Any ideas of a updated driver for windows xp?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  http://support.Microsoft.com/kb/812951

  For your reference: In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information is useful.

• Hitachi external hard drive does not work on Sony with windows vista

  I use a Sony with Windows vista laptop. I just got a 500 GB Hitachi external hard drive today. It was detected after that I connected, but there is no way that I can access the hard drive and save the files it contains. I tried to go to the administration tool and tried to change the letters of readers and paths, but this isn't an option for me (he is gray and I cannot click on it). It showed that the disk is healthy but unallocated. Could someone help me please? I really need to back up my laptop using this hard drive external. Thank you. Irene

  Hello Irene,.

  ·         You get the error message?

  ·         Did you do changes on the laptop before the show?

  Follow these methods.

  Method 1: Run the fixit of the article.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the article.

  Tips for solving problems of USB devices

  Method 3: Try to access to the external hard drive on another computer and check if the problem persists.

• USB and CD-ROM does not not on laptop HP with Windows VIsta

  I have a laptop HP with Windows Vista Edition Home Premium and I've encountered a problem:

  first of all, a month ago, the CD has stopped working. I can see the CD drive (: E) in the computer but it does not read any CD or DVD I inserted in it.

  Secondly, a few days ago the same problem happened to my USB (all 3 of them) ports. I can charge my phone/mp3 player but I can't download photos from my camera or music. I always get a message that says:

  "Unrecognized USB device".

  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize... »

  I tried a solution proposal (to unplug the laptop and the re - connect after some time), but does not work.

  Also, I did a scan (start - all programs-accessories - command Promt... and after analysis it I got this message:)

  Windows resource protection did not find any breach of integrity.

  If anyone knows what to do, help me please.

  aaaaaaaaaaaaaaaaaaaaaaaThank you.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Can not connect to laptop with windows password 8 after update

  Have a new laptop (ASUS) with windows 8. The laptop using my live account from microsoft for the login screen. After that the first windows update, I can not log on the laptop and had to have Best Buy reload windows 8 and start over. There is no way to unlock this processor without the password. This happened once more. I can log in to my account windowslive using a different processor, but cannot unlock the password of login by using the same password, as I did before the update. Other ideas that take over to Best Buy and getting the laptop with windows 7?

  Hi WillieReed,
  Thanks for posting on the Microsoft community!
  Do you see the error codes/messages when you try to connect?

  Here are some solutions: -.
   
  1. ensure that Microsoft account services are running, go to the page of the service status.

  https://status.live.com/

  2 reset your password from Microsoft
  To reset your password, or get help with a password and other problems with your Microsoft account, go to reset your password.

  https://account.live.com/password/reset

  3. check the length of your password
  Make sure that your Microsoft account password length is not more than 16 characters. The current maximum limit is clearly indicated during your initial account registration Microsoft upward, but may not be clear during a password change. The password change process to enter more than 16 characters, but your account will not accept anything more than 16 characters. You can change your password from Microsoft by clicking on change your password. (You may need to connect to your Microsoft account before you can access this Web page.)

  https://account.live.com/ChangePassword.aspx

  4. get on your Microsoft account to check if its been blocked or pirate by following the link below
  http://Windows.Microsoft.com/en-us/Windows-8/get-back-blocked-hacked-account

   

  5. you can also follow the link below if you have forgotten your Windows password
  http://Windows.Microsoft.com/en-us/Windows-8/forgot-Windows-password

   

  Hope this solves the problem, you can write back to us and we will be happy to help you further.

• Not able to download with window 8

  Hi, I'm not able to download Adobe acrobat XI with window 8.

  Please help.

  Thank you.

  Try using another browser

• X 61 Tablet with Windows 8 - no tablet function

  Hi I've just updated an old laptop with Windows 8 (Microsoft has a great offer at the moment = it's only a great offer if it works ;-)))
  The PC is a: Lenovo ThinkPad X 61 7767 tablet.

  But I have problems with the tablet interface. Windows 8 has been designed for tablets...
  With Virgin installation, the interface of the Tablet does not react.
  The Tablet is located in Device Manager:

  + Human Interface devices

  Compatible device HDI (3 lines)

  Wacom Penable Dual Touch

  All control programs are in place, the calibration program can be opened, but there is no response from the Tablet (stylus or touch). I looked on the support site of lenovo and downloaded different drivers, most with no effect, others caused screen blue windows - which, in windows 8 is more greenish blue.

  I also installed Wacom.eu ISD_DualTouch_710-9, giving the most positive result.
  Both pen and touch works (without double contact), but is not aligned (when it is in a corner, the pointer is 2cm from the corner x and y. Center of the screen is aligned)
  I can't calibrate, pen or touch. Tabcal running (from Control Panel or from the command line) gives 4 windows popup with error messages:

  (1) moduels to enumerate installed digitizer devices.
  (2) no suitable material was found to calibrate. \nWindows supports calibrating only integrated digitizers.
  (3) invalid display has been specified.

  Device Manager lists the tablet in the work:

  + Human Interface devices

  HID-compliant device

  Wacom device

  I tried to find a file with the calibration; I found an ISDTablet.xml, which looked good, but editing has no effect and the restart will reset to the original value. (The file has a section of calibration with the coordinates of 4 points)

  Secondary, can't do the buttons on the tablet to work (Ctrl-Alt-Delete, Rotate, Toolbox, Esc and slider knob).

  Any ideas are greatly apreciated ;-)

  Casper

  see this topic

• Sansa Clip + Question of burden (with mini USB cell phone charger)

  I have a few questions about the issue of workload:

  • is it acceptable to fresh clip + use the charger of mobile phone with mini USB socket (5v ~ 700mA), as I know, USB 2.0 specification is 5v ~ 500mA?
  • Sansa is equipped with a circuit to handle the charging process, for example the the blackout when the battery is fully charged?
  • After that several hours connected to the computer, the turn display self... is this normal? (so I have to press a button to see the screen saver and check the State of charge)

  Thanks for the answer of my question... hehhe

  You can use any charger, but be sure that it is 5V and not higher than (above will FRY your Clip).  Around 350 my and especially (even if some 500 my and above is best) is very well - the Clip will use the amperage he needs.

  Yep, you can disable the data pins and everything should be ok.  Just be sure you know what you're doing on the pins.  Many people say to be able to arrive at the same end simply by inserting the USB cable into the computer, not completely or by covering the data pins.  In addition, you can buy USB charge cables only - I have a couple of people.

  Note that when you connect to your computer, you can still read the Clip files, via the computer itself (not the music) and media playing software that is pointed and play the songs on the Clip.

• Webcam works does not in Studio 1535 with Windows 7

  Hello

  I have a portable studio 1535, it came with the Windows Vista operating system. However later on, I had installed Windows 7 Ultimate OS. My webcam first worked with Win 7. But for some time it does not work. I downloaded the driver for the Webcam (CREATIVE-LABS_INTEGRATED-WEB_A05_R207341) for vista from the Dell Web site. But when I installed it, at the end of the installation, it displays error message ""an error occurred during configuration of the driver.". I use the Dell Webcam Central software for webcam, when I run it displays messages "please connect a supported device".

  Please guide me to solve this problem.

  Thank you.

  Thanks for your reply. I tried the diagnostics and the other suggestion. In the end, I open my laptop screen laptop and found that plug a little besides that the camera wasn't attached correctly. I joined it and then reboot it installed drivers and now works correctly.

  Once again thanks for the reply.

• XBOX 360 controller will not connect to pc with Windows 7 64 bit

  I'm tying to connect my XBOX 360 controller to my PC and when for the first time I plugged the cable into the usb slot I the prompt to download the drivers and then a message saying that my device was ready to use. Problem is that no matter what I do, it seems that the controller does not communicate with the PC when I try to test using the joy.cpl I don't get any device in the list.

  Hi DarkAvenger1997,

  Please post your query in the Xbox forums for assistance.

  http://forums.Xbox.com/default.aspx?forumGroupID=17&XR=shellnav

• 8610: all in. A hp8610 printer prints not dell Pc running with Windows 10

  I just bought a HP 8610 printer one to replace an old printer HPF2480.

  I have installed new drivers from hp.com and everything was OK. I created the printer over an Ethernet connection to my router.

  When I printeed from my iPad it worked fine but since my Dell PC running Windows 10 nothing. The print request seems to disappear.  I spent hours uninstall and install drivers without success.

  totally puzzled, reinstalled my old printer and worked first time.

  don't know what to do next, if no resolution over the next few days will come back and get another brand.

  Please can anyone provide light on this problem.

  Thank you

  Hi @PJRP,

  Thank you for taking the time to update me.

  I am very happy to hear that I could help to resolve the first question that know you.

  If the printer is offline, please follow this guide:

  • Printer is offline (Windows)

  Please reply to this message with the results. Have a great weekend!