T5 HotSync with Treo 700wx

Similar Questions

• Treo 700wx bluetooth pairing w / Motorola IHF1000 - help please!

  Recently, I upgraded my Treo 700wx at the exit of the 1.24 firmware for Verizon Wireless. In the process, I lost the bluetooth pairing with my Motorola IHF1000 that was active before the upgrade. I was able to pair the phone with a handsfree Acura and my Lenovo computer system - I have questions only with the IHF1000 Motorola.

  The phone sees the hands of peripheral free Motorola during the match but when I enter the access code (1234), the synchronization fails.

  Someone at - it suggestions?

  You will not be able to reinstall the patch because the unit will return with an error message saying that it is already installed. It is indeed good to do a hard reset after an update anyway. I really hope it solves your problems, and I'm sorry for the inconvenience.

  Message is about: Treo 800w (Sprint)

• VZW 1.24 update for Treo 700WX (Verizon) LOCKED PHONE!

  I ATTEMPT to install the update 1.24 (Verizon) on my Treo 700WX. However, the update got to halfway through and then locked the phone (not saying no USB connection).  I followed the instructions (disconnect USB, unplug the power, soft reboot phone, etc...) and now the phone is STUCK on the opening screen of TREO with a "3.01" (without the quotes) at the top and NOT sync, turn off, TURN OFF, reset or anything like that.  Tried HARD reboot, NOTHING.  HELP * phone is DEAD!

  If you are still in the first year contact Verizon, otherwise contact Palm smart phone support. The unit must be repaired or replaced.

  Message relates to: None

• have a tungsten palm but don't hotsync with computer any ideas to solve this problem

  have artificial light of palm, was used for years.  can't hotsync with laptop.  any ideas to fix this?

  have artificial light of palm, was used for years.  can't hotsync with laptop.  any ideas to fix this?  Never mind. read pia techniques

• TX suddenly fails to hotsync with XP WiFi

  TX, Windows XP Pro HotSync Mgr 7.0.2 Palm Desktop 6.2.2

  I hotsync'ed my TX with Windows XP Pro for years with wifi; Suddenly, he stopped.

  I use Versamail and Blazer without problems; I can hotsync with USB but when I try to

  HotSync with wifi, I get my IP allocation, and then click "Connection with the desktop computer with a Wi - Fi connection" stays until I get "the connection between your device and the desktop could not be established.  Please check your configuration and try again. »

  I tried to use my PC name and IP number, same result.  I unchecked and recontroler the box of the network in the Manager of Hot sync-> connections without success.

  I apply patches to Windows they are released.  Maybe that's the problem?

  Suggestions welcome.

  For reasons unknown, my firewall, ZoneAlarm, blocking HotSync wi - fi.  He didn't for years.

  HotSync is now working correctly once more.

• More big time on the Treo 700wx display?

  Is software available that will allow a greater time on the Treo 700wx display?  I use the phone as my "wrist watch" and want the convenience of a larger display of each time I look at the main screen.

  I don't quite know what I can personally recommend, but Google turns up a ton of hits for today the clock screen.

  Probably you should look for all individual titles of interest on the forums on Treo before installation.

  Message is about: Treo 800w (Sprint)

• HOtSync with Outlook crashes on calendars (calendar)

  I just bought 2 weeks Centro HotSync worked fine until yesterday, now it freezes trying to HotSync with Outlook and I have to restart the computer. Here is the Log file, can anyone advise what to do? Thank you. The message 'saved a file... ". "has demonstrated since day 1.

  HotSync session completed with errors on the 21/01/09 19:53:54

  • HotSync session began on 21/01/09 19:53:44 and completed in 10.0 seconds
  • Abandoned Outlook calendar synchronization
    • Duration: 1.9 seconds
    • Outlook calendar
    • OLERR:05 - 0013
    • OLERR:05 - 000F
    • OLERR:0 D 000E
    • OLERR:05 - 001D
    • OLERR:0 D-0048
    • OLERR:0 D-0004
    • OLERR:0 D-0001
    • -Recovery Sync
    • OLERR:15 - 0002
    • OLERR:06 - 0001
  • Outlook contacts synchronized with success
    • Time: 0.5 seconds
    • Outlook contacts
    • -Fast Sync
  • Synchronized successfully Outlook tasks
    • Time: 0.3 seconds
    • Outlook tasks
    • -Fast Sync
  • Outlook sync successfully Notes
    • Time: 0.3 seconds
    • Outlook notes
    • -Fast Sync
  • Synchronized media successfully
    • Duration: 3.0 seconds
  • Save some files successfully on tt2000 backup folder
    • Duration: 2 seconds
    • Could not save 1 file (s)
      • PmTraceDatabase
        • Protocol error: handheld file could not be opened. (4004)
          • SYNCERR_FILE_NOT_OPEN
    • Saved 2 file (s) successfully

  Click on the following link for the Web page of kb.palm.com for the article regarding ' OLERR: (number)' errors in the HotSync log.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=31167

  You can first try the next option.

  There may be the database at the source of the problem. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will search the database and then to declare the corruption. You can then search records at the origin of the problem and fix them yourself or you can buy the program and do it automatically repair records.

  http://www.pimlicosoftware.com/dbfixit.htm

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/SRVS/Nua/launchTab.asp?t=home&fn=Centro&MN=Centro&CN=att

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  Message relates to: Palm i705

• HotSync with the Agenda

  My Palm T | X hotsyncs perfectly with my computer Win XP pro with each application except the agenda.  When the Agenda is selected for synchronization, desktop and handheld computer hangs at the point 2 of the 12.  Does anyone have a solution?  No, I don't use Outlook but uses the desktop 6.2.

  Thanks for your thoughts

  Tom

  Hello Tom_Gore, welcome to the Palm support community.

  This question was asked several times here... two ways to solve the problem.

  1 do a HotSync with the conduit for defined agenda on "Desktop replaces handheld.  This will write own copies of what you have HotSynced to your PC to your TX.

  2. download and install DBFixit to pimlicosoftware.com.  The free download will scan your TX for corruption and will fix some problems.  Others can request the subscription of the program to repair the damage.

  WyreNut

• need help with Activesync for treo 700wx

  When I try to sync the new info of my contacts on my phone it creates duplicates.  How can I just update the news since the last synchronization?

  Outlook 2003

  Windows xp home

  You are. To avoid additional duplication, I would try to remove the partnerships and that should hopefully get rid of this issue in the future. The only way to get rid of the duplication is a manual removal.

  Message is about: Treo 800w (Sprint)

• Treo 700wx with Win Mobile 6.0 - is DST Patch always necessary?

  I can't find any information on the issue of whether the patch of the DST is always necessary when you have upgraded to Windows Mobile 6.0.  Anyone knows?  Thank you.

  You do not have

  Message relates to: None

• HotSync with Microsoft Outlook

  I recently had to recreate the image on my PC and don't have the CD that installed on my PC HotSync Manager.  I downloaded the files on the Palm website, but I can't seem to synchronize with Microsoft Outlook calendar, that I could do before.

  Help, please.

  You are probably using an older version of Palm Desktop and you can upgrade a bit. First go to your add / remove programs in your control panel and remove Palm (or PalmOne). Once done, go to this link to download and install Palm Desktop version 4.1.4: http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/, /? St = 2610, E = 0000000000332809749, K = 2699, Sxi = 1, case is obj(37014)

  Don't forget the last ")" copy / paste the link rather than by clicking on it. You will have the Conduit PIM sync option with this version of Palm Desktop and Hotsync Manager.

  Message is about: Treo 800w (Sprint)

• HotSync with vista 64-bit and Tungsten E2

  I've been on with Dell and Palm technicians with no luck!  I do not see why I have to pay more for help when the pda has worked just fine with the years usb xp for more then a year!

  Enough of the b * hing. ... the problem I hope some can help me with.  After that I installed all the software for bluetooth Dell and Palm, I go through the steps of synchronization.  The laptop has received the name of the pda and pda bears the name of the computer, but will not be synchronized.  The message I get is "Cannot start the HotSync operation because the port is currently in use by another application"...  I take the bluetooth works, because they know each other names...  Can someone help me please!  I need to get this problem fixed as soon as POSSIBLE... I've been with her for too long.  I really want to buy another device, but if the Palm and not suports old tech, why go with them again?

  Sorry... I seem to not be able to help me with tears... Please don't turn back becase of this one...

  Thank you!!!

  Hello, I certainly understand how this issue can be frustrating, it is quite complex, but I can certainly be helpful with this issue. First of all, I would recommend closing all applications / programs on the PC and unplug the Tungsten E2. Then go into the hotsync Manager settings (open the hotsync application manager and right-click on the hotsync Manager icon in the lower corner of your task bar, you will see two (2) arrow invertly to another) after opening hotsync manager, click settings => connections => and make sure that the following two (2) are "checked" those are bluetooth and serial (com3). After making these changes click done. Then, using your Tungsten E2 access applications screen and select Preferences-online bluetooth and check to see if your PC is listed in your devices in trust. If the name of your PC is not listed in your device to trust, your hang up! If the PC is listed in the secure devices perform a hotsync.

  Also, I recommend take a look at the following Article, please click or manually type the following URL in your web browser: http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New, k = PalmSupportKB, t is ooccase, case = obj (49229), varset = to: breakfix

  Hope this helps, if not let me know!

  Message is about: Treo 800w (Sprint)

• Tungsten E2 HotSync with Win7 not

  Hello

  This topic, I spent days the web and this forum to research and tries in vain to synchronization.

  My system:

  HP Elite HPE-250f, Win7

  Kensington Bluetooth dongle K33348B

  Installed Palm Desktop Win62 and Aceeca 64-bit driver

  Aceeca handheld device appears in Device Manager when the button is clicked on USB cable

  set connection BLUETOOTH FOR PC

  Palm Desktop Win62 offers no connection in the menu bluetooth USB is the only option, but do not work. When you use hotsync error portable device is: hotwync due to the serial port cannot be used by another application.

  Any help would be appreciated.

  Best regards

  Phil

  Hello and welcome to the HP support community!

  Make sure Palm Desktop or your E2 are both set to HotSync via the docking USB cable.   When I open Palm Desktop on my laptop and click the HotSync icon, then connections, I see these options:

  USB

  Network (TCP/IP)

  Serial

  If you don't see these, then I suggest that you do a clean uninstall/reinstall of Palm Desktop.

  USB for Palm Desktop 6.2.2 version works fine on my x 2 HP spectrum loan.

  These instructions are for Vista, but should work for Win7.
  
  You first need to you a copy of your data to have just in case something happens. You can find your data files by clicking on start-> Documents-> Palm OS Desktop. Highlight your Palm Desktop user name and right click and copy. Then go to the desktop of your PC, click on a blank spot block and select.
  
  If this is the first time, you install Palm desktop and encounter a problem, go to the previous step. If you are not concerned about your data at this stage, go to the next step.
  
  Now, you want to uninstall Palm Desktop and remove anything that has to do with Palm Desktop on your computer. Go to the following locations on the PC and delete the folders listed below. [C:\Program Files\Palm or C:\Users\[Vista Palm connection name] \appdata\local\virtualstore\Program Files\Palm or PalmOne C:\Users\[Vista Login Name] \appdata * note you may need to show hidden folders to join appdata. To do than to go into your control panel and open folder options. Go to tab and uncheck hide hidden files.
  
  When you use Palm desktop 6.2, look in my documents or documents and delete the folder Office of PalmOS. It is the location of the PD 6.2 data files.
  
  Once this is done, you will need to remove certain keys in the registry of your PC operating system.
  
  Word of warning, go here and removing the wrong thing can cause your PC to start, crashing and deletion of programs and data. If you feel that you are not sure of yourself, see if you have a friend who can help you or a PC technician that you can pay to help you. This procedure will show them everything they need to remove. To make sure that we have a good copy of the current registry, we make a backup of the registry.
  
  Go to start on your PC in the search box type "regedit.exe" without the quotes.
  
  Point peak COMPUTER, go to file-> Export. Should appear with a save as box. Current place of residence is fine, must be within My Documents, or save to a location that you will remember. In the name of the file in low type "backup [todaysdate]" i.e. backup07072008. Then, the most difficult part.
  
  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. You will be asked, you of course. Say Yes. Do the same for all the keys below.
  
  If you make a mistake, stop what you are doing. And call a PC technician. BUT do not turn off your computer.
  
  The reg keys are as follows (Note: some of the theses reg keys will not be here, but if they remove them)
  
  * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer * Robotics\Pilot Desktop HKEY_CURRENT_USER\Software\U.S. * HKEY_CURRENT_USER\Software\Palm * HKEY_CURRENT_USER\Software\Palm, Inc. * HKEY_CURRENT_USER\Software\PalmDesktopAutorun * HKEY_CURRENT_USER\Software\palmOne * HKEY_CURRENT_USER\Software\PalmSource * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
  
  Then, restart your computer.
  
  Then, reinstall your Palm desktop from the CD (or a download) and do a hotsync. If request you a user name, enter the name that is on your device in the upper right of the screen to hotsync.

  WyreNut

• Problem of HotSync with Tungsten E

  All of a sudden, when I touched the hot sync button on the spot which is held, I hear the "boink-boink" in the office, but then nothing happens.

  Then I get the error message: "the connection between your computr handheld and the desktop could not be established.  Please check your game back upward.

  I even went up to remove Palm desktop and then reloaded with the original disc.

  Help?

  Well, there are two things that must be done in order for hotsync function properly

  1. your computer recognizes the device as a pocket with no problems at palm computer
  2 Hotsync recognizes the device as being connected.

  At least that number 1 is occurring without number 2 won't.

  If you are familiar with your computer's Device Manager, run that... While you look at Device Manager try hotsync and see if it recognizes the unit correctly if he acknowledges incorrectly, you will see a yellow exclamation mark next to it.

  If there is an exclamation point. Make a click right on it and it say to uninstall the drivers. Unplug your device, then perform a soft reset. Once the machine starts back again and try an another hotsync.

  Message relates to: Centro (Sprint)

• HotSync with Vista TX

  When I hotsync my TX with Vista, I get the same error (Sys 0505) (0.841) and it gave rise to some applications of synchronization does not however, the last time I synced the app removed all "Memo"

  Since my office, fortunately leaving the info Memo on my TX. Can someone please help me solve this problem. Thank you

  Hello and welcome to the Community Forums of Palm.

  Please read about four threads in the section of son "stickied", for a post that deals with the "(Sys 0505) (0.841)" error and how to get rid of.