T500: What capacity with the 9-cell?

Similar Questions

• What capacity of the HARD drive in 1670CDS

  New, I HAV Satellite 1670CDS with Phoenix BIOS ver. A 1.07.
  My drive HARD broked down. I have to buy a new one. What capacity of the HARD drive will be detected BIOS corectly? How many GB of hard drive I can buy?

  Thank you very much.

  Hello

  This kind of information can give you just authorized partner. I found the info your device comes with 6 GB of HARD drive. Am I wrong?

  I'm sure you can use 10 or even 12 GB of HARD drive without any problem. If you want to use more than capacity, it is possible that it will not be recognized by the BIOS.

  I found an offereor which has guaranteed that even at 30 or 40 GB hard drives can be used on older models, but the BIOS should be handled with the special tool and is not for free.

  Good bye

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• What happens with the app that I do not install now?

  What happens with the app that I do not install now? It will be available 1 year from the moment I am installing? Because I only need to photoshop and Illustrator now, but next year, I will work with inDesing. I have not yet installed inDesign and wish that, when I install it the next year it will be available 1 year. I bought the cloud creative adobe and I only install Photoshop and Illustrator now.

  Thank you

  In addition:

  Membership begins when you buy instead during installation. All applications are on the same schedule and will expire and renew at the same time.

• What is with the monthly subscription? Can I buy is only the program as a one-time fee?

  What is with the monthly subscription? Can I buy is only the program as a one-time fee?

  Yes you can, but they have been very confused about this option (try to get people to opt for the subscription - please let them know what you think of this policy). The link is to http://www.adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_software _sl_mostpopular.html. The default value is subscription, but if you click on the 'I want to buy' drop down list there is complete and updated versions to available level. It's so confusing if you don't know it's available, you would probably never have it find. I have not found it until some other MVPS made outside and many of us complained.

• Dealing with the merged cells in a table

  Hello

  I use tables often enough in InDesign, and I always ran into the same problem with the scripts - dealing with merged cells

  The number of lines, I have a few cells which are merged horizontally

  As I go through the cells in my selection, I want to test the line with the contents of the first cell in the same row - that is, the key to the line

  In short, that's what I want to do:

  1. Select the cells (manually)

  2. run the script that checks each cell in the selection to test if it is in a line that begins with 'TOTAL' - and then, act accordingly

  My problem is that the results are never is correct because some lines have merged cells

  In turn, column 1 could have 50 lines, but column 2 can only have 48 rows (because it has 2 m)

  That is why, when I check the contents of the first row as such:

  cells[1].parentRow.cells[0].contents
  

  He was not a match - even if it's in the same line.

  What is the best way to get around this problem?

  If anyone can give help on this topic, I would be very appreicate it

  Thank you

  Davey

  Why do you need to know the index of line? Isn't parentRow get you the line concerned? I tried to recreate it but I don't see the problem. Maybe you can post some more of your code where exactly is the shift is not clear.

• What wrong with the search bar?

  Firefox is seriously p * ing me off today, what's wrong with the browser, it serves to be one of the best, now an absolute piece of software of the waste processed sound.

  Anway my problem is, AFTER upgrading firefox, I can't use my SEARCH BAR to look for anything!

  I continue to redirect to this

  file:///C:/users/Kamran/appdata/roaming/ToolbarInstaller/ToolbarInstaller/1.0.0.0/Google.html

  which is not very useful!

  I think it might be interesting to switch to google chrome and get rid of that junk!

  Edited by a moderator because of the language. See the rules and lines guidelines .

  Hi, I did what you said and disabled all add ons and one allowed them and managed to make it work. It was the 'googlebar update"add that I disabled it and everything went back to normal

  Thank you very much

• What happens with the support of the seller now?

  After a year on the world of BB, my last update of the app was rejected for a mention of a competitor device, including the help, even if this text is in the HelpFile for the app was introduced a year ago. I had several problems with the notice of rejection, too many to describe the limited size of editing area on the assistance of the vendor page, so I asked them to tell me how to send email directly to a more detailed question. About a week later, I got a reply with an email address, so I sent my full question so that I can present my application in full compliance and avoid another rejection. Shortlly after what I read Blackberry pulled about 650 employees of supplier support because they were going to focus on the business space. Since then, I waited about three weeks, without response, and it's more than a month I tried to provide some features improved my users.

  Given the bad news on the Support of the seller, what I want to know now is:

  1. Are there dead ANY provider of support for answering questions of application developers?
  2. If so, what is the waiting period now to get answers.
  3. Blackberry completely abandoned the independent developers now?

  I made the choice in February 2013 to focus exclusively on the development of native applications for Blackberry 10, tie my future to the success of the new operating system. Now, it seems my faith and commitment have been misplaced and I wonder how much longer before the existing applications are left to wither on the vine, because developers are no longer able to fix bugs or add features.

  Hi greenmr,.

  Can you give us a few bits of information specifically regarding your post?

  (1) what email address you send your long list of questions too?

  (2) did you have a case or Incident # assigned to enamel (usually contained in the subject line of an answer or an automatic response)?

  To answer your question, yes there are still people working on BlackBerry World and in particular, support for the seller.

• What happens with the Dehaze adjustments during the transition from CC LR6?

  Hello

  I use LR CC for a year, but for my personal use (do not use PS at all), it is not sensible to continue in this way.

  I would switch to LR6, which does not include the cursor "Dehaze."

  What happens to my catalogue after this switch?

  The pictures that I have already edited will be even more "washed out / misty", or that they will keep their current appearance, only that I won't be able to change more?

  Are there risks with regard to the compatibility and stability due to switching of CC to LR6?

  Another question: are there any other restrictions with the Windows program (in order not to count mobile / Cloud / etc) in LR6 compared to the CC (meaning in addition to Dehaze)?

  Thank you and best regards,

  R.

  Hi icarus,.

  Your catalog will remain that is after that proceed to Lightroom 6 and all your changes will be kept however, you will not be able to apply dehaze more edits since that option would be eliminated.

  6 of Lightroom is also compatible and stable as Lightroom CC.

  There is no other limitation with Windows program outside the Dehaze slider and the Mobile version.

  Kind regards

  Claes

• What happens with the data on ROW as soon as they are storage migrated to VMDK?

  Hi all

  The following scenario: I have a virtual machine with virtual RDM. I have storage migration online, selection of thick discs so convert the VMDK RDM. The question is: what is actually happening with the data on the LUN that was RDMs, once the migration is complete?

  I expect that the data are still there, and if needed, I can remove the VMDK and re - attach the new LUNS as RDM.. But I can't find any official information on this.

  I am not mistaken? Y at - there somewhere that says clearly what is happening with the data?

  Thank you!

  Your wait is quite correct. The data on the raw LUN will not get affected once it is converted to a virtual machine. Only the mapping of RDM file is deleted and the LUN becomes available, and you can use card or again as an RDM or to create a VMFS data on that store.

  André

• What happens with the development of AppAssure

  There has been no release again in what is becoming an alarming number of hours.

  Jason,

  We have modified our release cycle to include patches of cumulative update to the current version (we are on the present - 3 update support.software.dell.com/.../155437) in response to complaints from customers regarding the rate of the new versions, we have generated over the past year.  These cumulative updates are expected to provide the latest patches for the problems of clients may face while not requiring not all customers to update.  We will continue to update our support site (support.software.dell.com/.../download-new-releases) with the latest cumulative updates as they become available.

  We don't have an ETA for the next version at this time.

  Thank you

  Tim

• What happends with the statistics after the tablespace change?

  Hi all.
  
  I'm on Oracle 10 g R2. I want to spend a few tables and its indices of a tablespace to another. I would like to know what
  happends with statistics and I have to recalculate the.
  
  Thank you.

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/tables.htm#sthref2297

  
  Move a table changes the ROWID of the rows in the table. This causes indexes on the table must be worn UNUSABLE and DML accessing the table using these indices will receive an ORA-01502 error. The indexes on the table must be deleted or rebuilt. Similarly, all the statistics in the table become invalid and new statistics should be collected after the removal of the table.
  

• What's with the new update 22.0? Why is that so bad? The size of everything is to enlarge each photo that I upload to the web is blurred. Fix it!

  Solve the problem and stop with the zoom to each page. Its a terrible thing for each photografer.

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
  You can adjust the resolution of your screen.
  To change it follow these steps:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• There is an option to 'save all tabs before closing' - what happened with the last update?

  In formats previous Mozilla, if I had more than 1 tablet open as: Facebook, Aol.comand much much more. When I was ready to close the window and hit the 'x' at the top right, I'd get the options "save tabs & close" "close tabs" "Cancel".

  This gave the option of not having to look for things once again, if you are looking for the same tabs all the time. It's the same exact box you get now, but with the option 'save the tabs and close.

  This option can be added back?

  Thank you for taking the time to listen to...

  Clicking history > restore previous Session, restores your tabs and windows of the previous browsing session in Firefox 4

• Running Mac OS older than what came with the Mac

  I just got the phone with Apple's Support and the representative told me that no Mac will perform a Mac OS older than the one that came with it. Can someone verify or refute this claim? I've been using Macs since I was introduced to a warm SE/30 in 1989, but I never remember to do this.

  So why would I want to? Well, I just bought an iMac 2014 end provided with Yosemite (10.10), to replace an early 2011 MacBook Pro that came with Snow Leopard (10.6). I am a photographer, and I have three dear old Sony sublimation photo printers that I can run only with a software package that has turned into a pumpkin after 10.6, so I have the updated MBP in place like a machine to dual-boot with a small partition of 10.6 for the software and a large partition of El Capitan (10.11) for most of my work. I want to put in place my new iMac in the same way (of course, the upgrade of its large partition to El Capitan); Otherwise, I will need to keep the MBP as a print server. (Or more likely, press an old iMac 2006 with a screen of bad back in service as a headless print server).

  If it is impossible to start in an old Mac OS, are there emulators that could achieve this goal (which might be better - avoiding a reboot)? Sony has been much better update their printer drivers for Windows and Mac, so I could probably run in Windows under an emulator like Parallels or Bootcamp, but I try to avoid dealing with a completely different environment. (Not to mention the fact that two of my Sonys are SCSI machines I drive with FireWire 400/SCSI converter; not to tell how Windows would treat that ;-))  Of course, this alone probably favour the approach of print server, because I do not know how things do you wear with a double conversion (starting with the new iMac USB3 or Thunderbolt and passing by FireWire SCSI. It's all too complicated...

  In a related issue, if I am successful in 10.6 market in some way on a new Mac, could I also run Rosetta? Snow Leopard is the last Mac OS supported under Rosetta PowerPC applications, and I have a still-good condition, fully licensed Adobe Creative Suite Premium (PowerPC) that I want to continue to run and make so much faster that this old iMac (or even my MBP) will be.

  TIA,

  Ken

  1. use Mac OS X Server 10.6 (phone the Apple Online Store) inside a product such as VirtualBox or Parallels Desktop.

  2. Yes.

  (136839)