tab analysis!

Similar Questions

• HP Officejet Pro 8600 Plus: HP Officejet 8600 does not scan to computer more - after having moved from the House

  Equipment:

  HP Officejet Pro 8600 more

  MacBook Air mid 2011

  Mac OS X Lion 10.7.5

  ASUS router DSL - N16 (new)

  I moved home and brought my computer and printer with me. I chose a new access provider and sent the new router.

  My old House my computer and the printer/scanner worked fine. Now set up at the new House and I can print but it won't scan. The computer and peripheral HP are connected to the router. I uninstalled all the HP software and reinstalled. On the front of the printer if I select Scan of the computer he says not 'found computer.... ' Make sure that the feature is enabled"using the HP utility. But in the HP utility there is not the option "Scan to Computer" more. I used to be able to scan to the computer to the printer, and I used to have a scanning tab in system preferences / print and scan - but not more!

  Details of what I tried:

  1. Uninstalled HP software.
  2. System preferences / Print & Scan - removed all printers.
  3. On the front of the printer: you click Network and disconnected.
  4. Off, computer, printer and router.
  5. Tour of router on. The printer is turned on.
  6. Used the wireless configuration wizard.
  7. Chose my router - "Found WPS router".
  8. The router WPS button is pressed. 'Network connection' 'successful connection' (n.b. left wireless live 'Off').
  9. Turned computer on - check the connection to the router OK.
  10. System preferences / print and scan - Add printer. He sees my printer - I select this one.
  11. Option to download and install the software of Apple-selected.
  12. Printer appears in Print & Scan-Idle / green spot. There is a print tab and a scanning tab.
  13. Click on the power levels: "Information not available". Click the HP utility: "unable to communicate with the device selected. Try to print: "the printer is not connected.
  1. Go to support.hp.com/gb-en/drivers - type in the printer model.
  2. Download the installation software "HP Officejet Pro driver software and full functionality" version 12.23.0. Save the dmg file.
  3. HP download and install the wizard downloads files on computer. Click on dmg download, double click on HP Installer.app.
  4. Click the HP Installer dialog box. Ignored HP ePrint offer.
  5. "Select the device you want to install" - no device is listed. Click on «my device is not listed...» "and"continue ".
  6. Select model device drivers - 8600 network / wireless Officejet Pro. Installation options: checked HP recommended software and additional software.
  7. Software installed with success, but still need to configure the device. Press to continue.
  8. Device not shown yet. Add device manually, using the IP address of the printer. Printer is displayed.
  9. 'Add the Print Queue' box - must add the printer to the system by using the "add a printer".
  10. Click IP in the toolbar. Protocol: HP Jetdirect - outlet. Enter the IP address of the printer. "Print using" field shows my device. 'Add '.
  11. Back to the installer - congratulations! Successfully installed.
  12. Utility HP ok - prints ok.
  13. On the front of the printer: select Scan / scan to computer: «no Found computer...» Make sure that the feature is enabled. Mac OS X: open utility HP. Under scan settings, click Scan of the computer, and then make sure Enable Scan to computer is selected. »
  14. In the HP utility, there is no "Analysis settings" or "Scan to Computer". There is "scan to E-mail and"Scan to Network".
  15. In the system preferences / print and scan - it doesn't have the printing tab and the tab analysis (see 12 above)
  16. Check the built-in Web server. Wireless status is connected. On the scanning tab I can Webscan to computer (but only 1 page at a time - not good for multi-page documents!)
  17. Try Apple Image capture - no devices specified in the list of devices.

  Hello

  First, make sure you have the latest firmware installed as follows:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series---N911/4322915/model/4323647/document/c02919168/

  Then, try the following:

  1. Of the printer, click on the right arrow / left and press the ion of the configuration of the printer.
  2. Select Network Configuration.
  3. Select direct Wireless Configuration.
  4. Ensure the Direct wireless is enabled and take one step of his password if such a value.
  5. Click on the WiFi icon from your Mac and connect to the SSID 8600 spirit "live / Print" in its name.
  6. Go to System Preferences > print and scan and click on the plus sign to add the printer - you see it listed as Hello via the direct wireless connection?

  Please let me know the results, if it not listed as Hello with Direct wireless, which clearly show that the new router interrupts the multicast connection, this is the same as the connection through a different router.

  On your screenshot, it seems that your router do not transfer packets to multicast to the need...

• To find the first Summit for data channel

  Hey guys,.

  I need a little help. I wrote a script to process some data. Basically, what the script does is calculate the linear accelerations peak, peak of the angular speeds, HIC values and IF. But there is a problem with my script that I need help. In my script, I use the ChnPeakFind command to find the pics in my chains. This command works fine to find the peak value, but what I want to do is find the FIRST Summit in the data, without worrying whether or not it is a maximum. I always encountered data that varies in which my first pic (impact analysis) may or may not be the highest point in the channel. As you can see in the Graphs.png that I have attached, the ChnPeakFind command found the 2nd Summit (red circle #2) in my chain of angular velocity (ARS resulting). But what I report is the first peak value (red circle #1). I've also attached a screenshot of the section in my code where I calculate the angular velocity. The 'i' in the calculation is just the channel group number. In this case, it is 1. Anyone know how to change the code or have another suggestion how to find the first Summit in a channel without having to stop and go to the tab analysis to manually find the pic?

  Thank you!

  Hello

  If it please see my littl below escript and let me know if this could work for you

  Dim     oChnResultant
  
  Call Data.Root.Clear)
  
  Call DataFileLoad ("E:\Customer_Examples\01_Head_Impact\Head Impact Data.tdm", "CT", "Load")
  
  Set oChnResultant = data. Root.ActiveChannelGroup.Channels.Add ("Result", DataTypeChnFloat64)
  
  Call ChnXYZAbsValue ("[1] / ARS X","[1] / ARS Y","[1] / ARS Z", oChnResultant)
  
  "Use the filter twice to get rid of the jig
  
  Call ChnSavitzkyGolayFilter (oChnResultant, oChnResultant, 1, 12)
  
  Call ChnSavitzkyGolayFilter (oChnResultant, oChnResultant, 1, 12)
  
  ' Delete few maxima to the beginninf of the signal.
  
  Calculate the call ("R = IIF (R)<>
  
  'Research for first peak.
  
  Call ChnPeakFind ("[1] / Time axis","[1]/Resultant","/PeakX","/PeakY",1,"Max.Peaks","Time")
  
  

• mathematical calculation in script on each element of the array.

  Hi all

  I am trying to write the VB script in which I want to do different mathematical operation on each element of channel-specific data. For example, for each element I want to find the next two index given way and both before and after publication of the results on the basis, then it is more calculating.

  It will be very useful if someone can guide me in the execution of operation on the elements in the array inside the script of tiara, that we can do in labview using indexes in the table. There are built-in math and statistics in tiara tab analysis tool. But I want to design for my custom mathematical operation.

  Thnks

  HS

  Hi HS,

  Here is a version 10.2 tiara from what I understand ask you:

  Window = 2

  Denom = 2 * window + 1

  Threshold = 10

  Chnum = CNo("[1]/Speed")

  FOR i = 1 + ChnLength (Chnum) window - window

  Sum = 0

  FOR j = i - window to i + window

  Sum = sum + ChDX (j, Chnum)

  NEXT ' j

  Ave = sum/Denom

  IF Ave > threshold CAN

  ' do action of contingent

  END IF

  NEXT ' I

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• Redistribution of load capacitor

  Hi guys!

  I'm checking a scenario mere accusation of redistribution between two capacitors using Multisim. I have a cap of nF 220 initially charged to 5V and it is connected to a ceiling of 5 pF through a 35 Ohm resistor and a switch that is normally open, but closes at some point to.

  Theoretically, after the closing of the switch in time, I see the 5 pF capacitor load to almost 5 V, while the 220 capacitor drops very slightly less than 5 V. I expect the time constant of loading are very low, since the RC is essentially 35 * 5 * 10 ^-12.

  This is not what is happening in the simulation. The result shows actually the tension of these two caps continues to increase beyond 5 V after the switch is closed. Any ideas what went wrong? (circuit file attached)

  Thank you

  Anik

  It seems that the simulation does not take enough samples.  In the transient analysis, you should see "Tmax" option on the tab "Analysis settings" button, doing this will more small number Multisim to sample more, try 1 - 9 sec since you have a little time the constant force.

• M277dw MFP: MFP M277-DW Scan to network folder

  In the settings of the printer - tab analysis - scan to network folder Option. I tried to capture the information of folder in smb and afp format. None is accepted by the printer. Can anyone help? Note that this is to connect the printer to a shared folder on a MAC

  Thank you

  Hey @Hopflys, welcome to the Forums of HP!

  If I understand correctly, you configure the scan to network folder and despite your efforts, shared folder information is brings not accepted. Please take a look at the following post, written by @Gemini02 , as well as the steps to configure the feature described and easy to follow: Re: configuration of scan of file.

  If you need assistance, I would like to know the results of your efforts and I will do my best to help. If this solves the problem you are experiencing, please be sure to click on the I accept as Solution button below so that others can see what has worked for you.

  Thank you.

• Power of fire-URL blocking - how to see the hosts?

  Hello

  I work with the implementation of a system of firepower on an ASA5525X. I activated the blocking of certain categories of URL, it works fine and I can see that a number of classes of forbiddel connections is arrested. But how it go down and see what internal hosts attempt to access the URL forbiddel? Standard reports or dashboards that gives this information?

  Kind regards

  Thor-Egil

  Hello, what are you using for the configuration of the module of firepower? ASDM or firepower Management Center (FMC)? In WCF, you can get detailed information about each transaction in the tab analysis-> connection-> events. Please, see the attachment.

  But first, you must configure journaling in access policies.

• Summary of the badges are not related correct score?

  Hello

  Did a migration week last in my lab of 5.8 to 6.0. The migration process selves went very smooth. I did a cleanup and checked/changed the auth in the vCenter adapters info.

  Everything seems to work perfectly, and I'm a data grouping of three different vCenters.

  But it seems that the scores on the 'Summary' for DC, Clusters and hosts tab are not correctly calculated. Two of my clusters spread pretty thin resources wise and I ran out of RAM and the drive on one of the clusters. This is clear when you look at the tab 'Analysis' of the object to the title of the resource and time remaning. Notes for the two tabs is 0 (RED).

  Shouldn't the summary score for "Risk" being hit by a very low score ('0') for the remaining capacity and the remaining time? Health and energy efficiency score is also off in my environment. Health is 100, risk 0, Effiency is 100. This is all wrong in my environment and 5,8 reflects the sad and true history on my lab environment ;-)

  Best regards

  Øivind Ekebergtunnellen

  Right answer:

  «Great badges are based is more minor badges as he did in 5.x, which, in your example, the capacity and the remaining time are.» the badge of great 'risk' is driven by risk triggered alerts. »

  Thanks to Maher AlAsfar for the answer.

  So given that the risk consists of not minor badges but risk alerts I propose you go to content-> definitions alert and start learning alerts that might happen and what triggers them.

  Click all filters-> Impact-> risk. Then you can see the 17 built in reports of risk. Edit each of the alerts to learn what triggers the warning symptoms.

  If you look, for example, "Virtual Machine a CPU Contention caused by Co stop" you can see he has 5 triggers of which 3 must be active to trigger the alert.

  BR,

  Monberg

• Widgets/Dashboard customized for vSphere Web Client?

  Hey all,.

  I have tested vCOPS 5.7 in the laboratory and have a question:

  Is it possible to create dashboards customized to the users that connect through the Web Client vSphere?

  Or is it only possible to create dashboards customized during connection of users through the personalized UI Portal?

  I have a few users who will record only by using the Web Client vSphere.  Although the predefined dashboards is nice, I want to know if any degree of customization is possible.

  Thank you

  Andrew

  It depends on what exactly you want to customize, but generally vSphere UI as a whole is much less customizable than the custom user interface. It depends on whether access you if via the vSphere Client or directly through the browser. The widgets in the dashboard of the user interface of vSphere are hard defined by object type. The customizable part of vSphere UI is tab analysis (Heatmap Gallery).

  Hope this helps,

  Alex D.

• 5.6 test vs Trial 5.03

  Hello

  Why tab analysis, badges, insignia of performance risk is showed not?

  OPs 5.3 has been undertaken. Why 5. 6 is Foundation? I need demo to my admin

  to clarify:

  you have used the registered as a license key

  "VMware vCenter Operations Manager (support of VMware vCenter Server 4.0, 4.1, and 5.0)", expiring '2013-02-09?

  It's key to Enterprise license for virtual machines in 10K

  - and you have correctly applied to your new instance (via VI client)?

  -and then you have restarted the vcops product?

  - and you see ALWAYS the UI Foundation or...?

• Don't hide no view results

  Hi friends,

  IM in OBIEE 11.1.1.7 and I need to hide the report in the dashboard that shows no. results.

  For example, I have six reports in the dashboard in which 4 reports with data but 2 reports are with view no. result and I need to hide only 2 reports instead of delete it.

  Is it possible to hide dynamically based on the results and the results of the No. If it shows "No. Results" then to hide the report, but the report indicates the data then it must show the report.

  Thanks in advance.

  Kind regards

  Saro

  Try this

  Tab-> analysis results change properties-> view results-> custom display Message-> and then press the OK button

  ~ http://cool-bi.com

• Answers - analysis and Interactive tab appearing does not in responses

  Hello
  
  Recently, I installed 11.1.5.0 OBIEE. I am able to connect to the services fine presentation.
  
  But I don't see the analysis and Interactive tab when I click on New. All I see is 1. 2 published reports. Actionable Intelligence.
  
  I don't see a place where I can choose my business. I'm missing something here.
  
  Any help would be greatly appreciated.
  
  Thank you!
  Anand

  Hello

  I hope that your currently logged in user has the role of BIConsumer. If you want to do the analysis you must have a role BIAuthor or BIAdministrator card if your current users in this role, then it will work.

  Just go to Weblogic EM (FMW)--> application of the roles--> change here...

  THnaks
  Deva

• Workbook of analysis - several tabs of a cube type question?

  The workbooks are composed of worksheet, and a workbook can be associated with a type of analysis in IOP.
  
  In the demo of the IMP, the type of analysis workbook is linked to several cubes, one sheet per cube.
  
  Usually customers put in place one sheet per cube for their analyses in, but is there something that says they cannot have multiple worksheets for a cube?
  
  Is it possible to configure multiple worksheets, each showing a set of different measure, but have them connected to a single cube?
  
  Customer has an existing process requiring navigation to a specific intersection and has no desire to put all the measures they need on a spreadsheet, (they are used to a degree by spreadsheet and do not want to change what they do), while we're talking like a dozen sheets here.
  
  Bonus question: connecting the navigation so that if they choose a specific dimension member in a spreadsheet, the other worksheets in the same level go to this specific dimension member.
  
  Thank you.

  Usually customers put in place one sheet per cube for their analyses in, but is there something that says they cannot have multiple worksheets for a cube?

  You can have several spreadsheets attached to the same cube.

  Is it possible to configure multiple worksheets, each showing a set of different measure, but have them connected to a single cube?

  Yes.

  Bonus question: connecting the navigation so that if they choose a specific dimension member in a spreadsheet, the other worksheets in the same level go to this specific dimension member.

  Not currently. Each planning worksheet is independent. You can do more with VBA, but this will be a consultation activity.

• No updates from the Inbox, the console errors/warnings/information error (undefined tab, font: kern: too much subtable SHA-1 certification, beginning-bundle), 38.3.0. Full scan OK, Win 7.

  installed 38.3.0 about a month ago. This am, said Tbird messages are downloaded from the server, but do not appear in the Inbox. Can send emails. Error console starts by (E = error, W = warning, M = Message):
  M has not read the chrome manifest file.
  The use of the events of Mutation is discouraged.
  Type E: tab is not defined in tabmail.xml
  Force recommendation M SHA-1 (2 of them)
  Property unknown M 'xxx '. Declaration dropped. (5 of them in the mozorg.cdn.mozilla.net/.../start-bundle-xxxx.css file)
  Fonts downloadable E: kern: too big subtable (2 of them on the start-bundle file - xxxx.css)
  ....
  Complete analysis of the system of Windows 7 was OK.
  For now, I have stopped Tbird to check for new messages at startup or every 5 minutes, or auto download new messages.

  When you look into the activity Manager, which shows about the status of the download?

• Open a new tab does not work

  Yesterday the + tab opens a new tab when you click it. Today, it doesn't. New tab file does not work either. I use OS X El Capitan. I really want to use FireFox as my browser - it's much faster than Chrome. But I'm not going to open a new window every time I want to start something new.

  Continue the behavior mode without failure of Firefox? https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode

  If Yes, then we can rule out assorted settings, Extensions and themes. Next step is probably malware analyses, but I don't know what scanners are good for Mac OS.

  If not, then it is time to start weeding the themes and Extensions 1 by 1 until the culprit is found.