Tablas of widget creation of

Similar Questions

• Difference between a logical table duplication and creation of an alias

  Hello
  
  I have a question of basic theory.
  
  What is the difference between creating a duplicate in the MDB layer and creation of an alias physical and important in the MDB layer.
  
  I want to join the physical object to two facts and import that into MDB layer and duplicate the object logic and create an individual join for each of the entities in the MDB layer. This kind of structure will have any negative impact on the final result.
  
  Any suggestions on this will be greatly appreciated.
  
  Thank you
  
  This is for OBIEE10g

  FYI; Here it is my comments

  Assuming the column rename in MDB for the same physical object is supplied to this kind of approach ;)

  I suggest go by best practice or how consistency.
  A logical table should have a ref source of physical layer.
  Logic or presentation column should have at least one physical source directly or indirectly (buy from the other logical column)

  Would it help to have their own hiearchies dimension for each logical table, just in case you duplicate an existing logical table for which there is a dimension existing in the model you get consistency error.

  When you joined the MDB you may need to set the join by foreign key (which have a condition) in MDB instead of complex join logical layer.

• dynamic table of cluster creation

  Hello

  Is it possible that labview acknowledges the size of the table and it automatically ungroup in groups as many as number of items in the table?

  PS. I'm using labview 8.2

  Who would simply use a default cluster of 9 elements. What happens if the table is larger than 9?

  @ravi:

  You don't need to convert a table to a cluster and unbundle then the cluster to get the individual items. Index picture is resizable. Better yet: use a loop for with autoindexing. On the real graph being created I do not understand it. You use the same X value with different values of Y. It is just a vertical line. As altenbach likes to say, your code can be simplified to fit on a small stamp:

  

• iBooks failures of Widget creation

  Hello

  I have errors and failures during export to iBooks edge Animate 2014.1.1 WDGT files

  Sometimes the exported Widget is just OK, some other times, without apparent reason, the .wdgt lack of document necessary inside the Info.plistfile. It's just not there.

  As a result, iBooks author rejects to insert the Widget because it shows an error of "A main HTML is not defined". I tried to created artificially this Info.plist to a work file existing one and include the Widget file with the correct settings, without success.

  Anyone else experience this erratic behavior when you create of Animate WDGT files?

  Thank you

  UPDATE: I found that if I export the Widget without an Image of the poster, then the Info.plist file is generated correctly and the Widget works fine...

  Just for info

• Custom Widget creation questions

  Hi all is there,

  I don't know if this is the best forum to post this question but I'll try, maybe someone could help me.

  I'm working on an e-Learning project, all content (texts, graphics and audio) are ready, I just put them in a very complete presentation

  To create the presentation, I buy Adobe eLearning Suite.

  For my presentation, I want to have some sort of bar menu at the top of my slides and to do that I started creating a custom widget.

  The menu bar is created with Flash (AS2) and animation are friendly (it was the easy part)

  Now my problem is how can I bind the button actions to my Captivate project?

  I have 10 buttons action should be to move the presentation to a specific slide.

  I try to do with the cpCmndGotoSlide property, but that seems not work

  I also have another interrogation, "exporting" properties of my widget to Captivate to aim for each button slide number?

  Can you please give me a pointer to web sites that explain this?

  I read somewhere that it is possible to pass XML parameters, but I can't find how

  Can you also recommend a book?

  Thanks in advance for any comment or suggestion

  Best regards

  Fabrice

  Even if you don't place in the widgets folder, it can be inserted as a widget by insert > Widget or by pressing Ctrl + Shift + W

• Refresh the table after the creation of the new BO of Toplink

  Hello
  
  I have the following problem and I hope someone can help me. I use ADF11g/Taskflows with BOs TopLink-mapped (no ADF BC).
  
  Consider the Taskflow (s) following:
  
  the main activity is a (display) jsff page showing a table of BOs. From this point of view, two actions-defined results are called 'Edit' and 'create '. The edit action called an another Taskflow constisting of a pageFragment, showing the detailForm of the Soundtrack of data. This Taskflow has an input and output parameter (Soundtrack edit) and two are called "save" and "Cancel". Add Action calls a method called "createNewBO" first, and then calls the Taskflow mentioned also. Each Taskflow has ist own Bean managed in the pageFlowScope to work as a controller and DataControl to the TaskFlow and directly included views.
  
  The edit action works fine. The action also add except that the table of the default activity of the first taskflow does not update after return from the second Taskflow. I tried to put the property of refreshment in the PageDef of all possible values, in combination with the RefreshCondition, but no combination works. I can do a manual refresh or change the sort then the new Soundtrack is shown in the table.
  
  Is it possible to call a refresh of a jsff since a taskflow or I can force a refresh on entering the jsff?
  
  I am really stuck and appreciate any help ;)
  
  Friedrich

  You can try this:

  -on your taskflow diagram select the page that contains the table that you want to update, and add a Page parameter (from #{true} # {viewScope.refresh})
  -in pageDef page add an invokeAction in executable files and that it points to methodAction which fills the iterator to update
  -for newly created invokeAction, value refresh ifNeeded and condition of refreshment to #{viewScope.refresh}

  This should refresh the iterator each loading of the page (fragment).

  I hope this helps!

  Pedja

• The table widget. Inserting text, audio files, and pdf files.

  Hello world

  I have a client [Organization of the Church], that they want to put all their audio Sermon in their Web site. Similar to this: http://www.calvarysj.org/?page_id=1310

  They have many audio files and I think I need to sort by year or book but going back to my question, nobody knows how to do or what kind of widget I use?

  Thank you

  Debs

  You use the table here widget:

  http://musewidgets.com/collections/all/products/table-maker

  In addition to adding audio files;

  https://forums.Adobe.com/message/6429361

  https://forums.Adobe.com/message/6276219

  Thank you

  Sanjit

• Does not receive the table name in the list of schema objects creating EO

  Hello

  IAM does not have my name of the table custom in the list of schema objects during the creation of EO.

  I created a custom table and I need to use this table looks for creation EO,

  But while creating the EO, I'm not able to find the table in the schema object list.

  in the connection database, these tables are present, but only in this window (window of creation of Eo) these tables do not come

  can someone please help how to solve this problem.

  Hello

  I found the solution

  in business components that there is another database link that I've changed now, it works fine now

• Insertion of records in two different tables at the same time?

  Hello everyone, I have question about inserting records in two different tables at the same time, I'm looking for is by the way a unique id, which is created in the first statement insert to the second insert statement. Example of this problem:

  < cfquery name = "addRecords1" datasource = 'test' >

  Insert Into Table1 (name, Date, age)

  Values (< cfqueryparam cfsqltype = "cf_sql_char" value = "#arguments.) "Name # ' >.

  < cfqueryparam cfsqltype = 'cf_sql_date' value = '#arguments. "Date # ' >.

  < cfqueryparam cfsqltype = "cf_sql_int" value = "#arguments. Age #"(>); "

  Select SCOPE_IDENTITY() as RecID;

  < / cfquery >

  < cfquery name = "addRecords2" datasource = 'test' >

  Insert into Table2(Company,City,Date,ID)

  Values (< cfqueryparam cfsqltype = "cf_sql_char" value = "#arguments.Company #" >,)

  < cfqueryparam cfsqltype = "cf_sql_char" value = "" #City # ">,"

  < cfqueryparam cfsqltype = 'cf_sql_date' value = "" #Date # ">,"

  ( < cfqueryparam cfsqltype = "cf_sql_int" value = "How to pass RecID to insert in this table?" >).

  < / cfquery >

  In this example, I'm inserting records in table 1 and creation of IDENTITY SCOPE as RecId. I would like to pass this id and insert it in my table 2. This Id, I'll use in my second table as an identifier. If anyone knows anything about this please let me know. Thank you.

  );
  

  QueryName - DOT - ColumnName, so it should be:

  );
  

  HTH,

  ^_^

• Alias table and column aliases

  I'm new to the discoverer. I have some confusion.

  
  

  1. If it is possible use different aliases for the same table during the creation of spreadsheet?

  Need to produce different joins.
  

  for example:

  SELECT C1. Name, C2. Remarks

  CLIENTS C1,.

  C2 customers,

  Ticket T,

  Sale S

  WHERE C1. Client_Id = T.Client_Id AND C2. Client_Id = S.Client_Id

  2. How can I use the Alias column to show as a custom in the worksheet column heading?

  for example:

  SELECT Client_Default_Name AS name OF customers
  

  
  

  Thanks in advance.

  Hello

  first question:

  the sql worksheet is always structured according to the EUL (the end user layer). If you have used two customer tables and created a join of tables then the sql is generated according to your requirement. There is no way we can have discoverer create a sql like this. If you are interested with the sql. You can create a custom in the business district folder and paste the sql code and create a report on the top of the custom folder.

  second question:

  You can always change the topic in the discoverer more filing cabinets according to your requriement

  hope this helps

  -N.S.

• Can I create a table available in Captivate 6?

  I know that the simple answer is 'no', but I have a class with a table and trying to figure some way either to create or an alternative.  And Yes, it must conform to 508.  The table also contains links to navigate to the hidden slides that pop - ups.

  Here is a general example:

  Phase	Necessary?
  Analysis	N/A
  Design	Yes
  Development	Yes
  Implementation	NO.

  My experience has been that the table.swf widget does not work well.  I would be happy to develop HTML and somehow import it, but I don't know if it's possible in Captivate 6.

  Any thoughts?  Thanks in advance!

  In Captivate, you stop to think of the table as being a container for the text.  This is not HTML.  If the table is more than a background image.  You must have text links in the slide positioned on the bottom table cells. (this is an image or build you with boxes as Lilybiri suggested, but it is still sitting behind the text on the lower layers.)  Your tab is supposed to move to each interactive title for the hyperlink or text.  As the user is concerned, it won't make any difference in that the table is in fact so much that it works the way they expect.

• The status of VIEW after the partitioning of database table.

  Hi all
  
  I would like to know the status of the view when I perform range Base table partitioning?
  
  I will be performing these steps below for partitioning:
  
  1 rename the Original base table.
  2. create the new partitioned table by naming as the name of the original table.
  3. Insert rows in the table of origin for partitioned table.
  
  
  As per the steps above I am renaming the original base table and the creation of Partitioned table base with the same original name.
  
  VIEWS based on this table refer to new partitioned table with the same name, or what I need to re-create views?
  
  -Yasser

  View makes reference to the NEW TABLE of partitions on the same name... This isn't the problem... If you do not rename delete add column_name.

  SQL > create table a1 (identification number);

  Table created.

  SQL > create view v_a1 in select * from a1;

  Created view.

  SQL > v_a1 desc;
  Name Null? Type
  -----------------------------------------
  ID                                  NUMBER

  SQL > alter table rename to a1 to a2;

  Modified table.

  SQL > v_a1 desc;
  ERROR:
  ORA-24372: not valid to describe object

  SQL > create table a1 (id varchar2 (40))
  2.

  Table created.

  SQL > v_a1 desc;
  Name Null? Type
  -----------------------------------------
  ID VARCHAR2 (40)

• New web design - learn Dreamweaver first?

  I welcome the Dreamweaver community.

  After 30 years in print design, I finally made a decision to learn a little something about web design. With this goal in mind, when I updgraded to CS6, I bought "CS6 Design and Web Premium" package. The package includes Dreamweaver, Fireworks and Flash Pro. But I'm a bit confused where to start.

  I always buy the Adobe "Classroom in a book" series to learn the basics or new aspects of Adobe products. All three applications have equivalents of the IPC and I think I'll but the first IPC Dreamweaver, Fireworks and Flash Pro?

  So that demand, it's the right direction? I noticed on some forums of discussion that some use Fireworks more than Dreamweaver: I want to just make sure I'm on the right track.

  Any suggestion would be appreciated.

  Clinton

  Welcome to the community of DW, Clinton!

  30 years - which is an experience that you have up your sleeve!

  Web Design, fine, it works this way. It is in 2 parts - to start:

  • Design / layout / layout / wired / UI (two see it differently) - but the end goal is the same - to create the "design", in itself, that your site will look like
  • Development / slicing / Compositing / CSSing / PSD - CSS (again, different references) - make the "design", you did in an application such as Photoshop or Fireworks to be "web-friendly" - in other words, making .html and .css files that are the "basics" for a Web site

  Most web developers (including me) use Photoshop to create cuts of design (PSD files) we send back a million times the customer to get their approval. Then "decide" elements such as backgrounds, boxes, etc... Then open Dreamweaver, write the tag ""-which is the 'what' you want to display on your website (content, tables, boxes, widgets, snippets, etc...). Then, 'style' using 'CSS' Web site - for the match at the "PSD" that the customer had approved.

  That's it: I don't know if I could have put it more!

  CSS - Cascading Style sheet - is a piece of code that tells browsers how your website should be displayed. Height, spacing, margins, width, color, type of display, etc... With the birth of CSS - 3, things are even easier. A few key elements that can make the CSS-3 are lets say, Gradients, rounded edges, etc... (for which, you had to use a real .png or .jpg image in CSS - 2). Now, CSS - 3 can give you the same exact effect with no use of an image.

  HTML - now that HTML5 quickly supplanted the old web standards, you have decided to start your 'web journey' at the right time, I would say. HTML5 has infinite possibilities of creation 'sensitive' Webdesign - reactive, which means Monotype, multi-devices - for desktop computers, Tablet & mobile phones.

  With all that said, that Dreamweaver CS6 has some great tools for HTML5 standards like 'fluid Grid Layout"- with which you create 1 design, code 3 different documents CSS and BAM - your website will be optimized for all devices 3.

  Fireworks - certainly usable for web design. CS6 Fireworks has also some great tools such as 'Generator of CSS' gives you the CSS code for an item of the chosen design - in other words, the design in Fireworks, go over it, fireworks will generate the CSS code for you.

  jQuery - you should watch this - a few great 'plugins' that you can use in your website design / development. Now that 'Flash' is a kind of death (modern Pocket PCs do not support Flash), jQuery is your friend. Best part is completely open source.

  The next step - dynamic Web sites - as its name suggests, you can get in the construction of more "interactive" sites - such as a shopping cart, etc... then once you get a good shot of some basic CSS HTML &. And if you decide to use jQuery, you will get also a script - what is essential to build interactive websites as you progress.

  You can take a look at this video on Youtube. I know that there not too many views. But I personally think it's a good place to start with Fireworks - http://www.youtube.com/watch?v=NrJmyYfNu1M

  This maybe go a little above your head right now - since you are a beginner to the top. But, feel free to ask questions as and when you have one, and we will be happy to help you! The world needs more of web designers / developers after all!

  All the best.

  -ST

• Partitions don't synchronize only not - Oracle SQL Developer 4.1.3.20

  Hello

  First of all, thanks a lot for developers for this great tool.

  I use the Data Modeler which comes with Oracle SQL Developer 4.1.3.20.

  In the 12 c database, I created the following table:

  CREATE

  TABLE MMOURA. TEST_TABLE

  (

  NUMBER OF ID_TEST_TABLE (10) NOT NULL

  DATE_TEST_TABLE DATE NOT NULL

  )

  ORGANIZATION HEAP PCTFREE 10

  LOGGING NOCOMPRESS NO INMEMORY

  NOCACHE NOPARALLEL NOROWDEPENDENCIES DISABLE THE MOVEMENT OF THE LINE;

  I import with Data Modeler and add the partition:

  CREATE

  TABLE MMOURA. TEST_TABLE

  (

  NUMBER OF ID_TEST_TABLE (10) NOT NULL

  DATE_TEST_TABLE DATE NOT NULL

  )

  ORGANIZATION HEAP PCTFREE 10 TABLESPACE SYSTEM NOT LOGGING NOCOMPRESS NO INMEMORY RANGE PARTITION

  (

  DATE_TEST_TABLE

  )

  INTERVAL OF

  (

  NUMTOYMINTERVAL (1, 'MONTH')

  )

  (

  PARTITION P_BEFORE_2010 VALUES LESS THAN (TO_DATE (JANUARY 1, 2010 ',' DD/MM/YYYY "")) NOCOMPRESS

  )

  NOCACHE NOPARALLEL NOROWDEPENDENCIES DISABLE THE MOVEMENT OF THE LINE;

  So I can create a partition and generates the correct code.

  I click on "Synchronize data dictionary with model" and see the differences with the model and the database.

  In the models 'compare', 'Physical Details' is red. 'Partition' is red, "Selected" are marked, "Source table: TEST_TABLE ' is YES and" target Table: TEST_TABLE "is no.

  "Partitioning" is marked, and I can see the new partition "P_BEFORE_2010."

  

  But when I click on 'Overview of DOF', theres no changes:

  -Generated by Oracle SQL Developer Data Modeler 4.1.3.901

  -in: 2016-01-14 14:19:50 BRST

  -site: database Oracle 12 c

  -type: Oracle Database 12 c

  -Oracle SQL Developer Data Model Summary Report:

  --

  -CREATE TABLE 0

  -CREATION OF INDEX 0

  ...

  ...

  In the tool preferences, model, synchronization, it is marked:

  FUNCTION

  PACKAGE

  PROCEDURE

  ROLE

  SEQUENCE

  SYNONYM

  TABLESPACE

  In "Import Options", it is marked:

  Partitions

  Triggered

  What I am doing wrong? Is this some sort of bug?

  Hi Marcio,

  I'm afraid that data Modeler does not "DOF Preview" statements for changes in the distribution.

  Kind regards

  David

• Cannot create or delete applications Essbase with the Admin user.

  Hello

  I'm running Essbase in version 11.1.2.3.505. For some reason, I can't create or delete applications in Essbase using the native admin account. I suspect it may be due to the fact that I wore recently users another environment via LCM HSS & that the roles were somewhat detached/altered in the HSS database. I checked that the commissioning for the admin user has full administrator for the Cluster Essbase HSS rights. The ID works very well elsewhere in the suite of the EMP, workspace, planning, etc. But the option to create or delete applications are greyed out. I have a workaround, where I can use a user newly created/configured to handle these tasks. I'm not sure how LCM would allow the superposition of the admin account properties in the HSS schema.

  FYI - check the table CSS_USERS, the creation date is the date of construction original (as well as all other indigenous users) - so I don't think it's relevant. I guess the problem would lie in CSS_PROVISIONING_INFO, CSS_ROLES, or a similar place. After opening a SR with Oracle, they recommended that I restore the entire schema I quickly rejected. He is not a danger, because I use the workaround. But it would be nice to have an overview of the pros on what is happening / what has happened.

  Thank you

  Mike

  Wow, that's weird.  What do you see on the side of Essbase (rather than look at Shared Services) If you "appear privilege user xxxx;" in MaxL?