Custom Widget creation questions

Similar Questions

• Big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

  So we're all aware of the issues with vCenter 5.5U1 WebClient and how we are forced to use it to make use of all the features of the v10, vDS 5.5 vHardware (config switch changes the synchronization problems if an emergency change is done on c# client vDS) VSAN only available via the web client, flash, sluggish to questions do not respond the questions and the list goes with the presentation of the menus and hard to navigate, issues SSO (always after 5.5 upgrades)

  So @ VMware vCenter Architecture Team is going to make an effort to hear and give due to the much needed performance improvements and improvements to the user interface before adding more features and SSO type services which majority of clients don't use not and not force it's customers continue to loose faith its vCenter product?

  Looking for answers with options to remove vCenter 5.5 U1c installation as well as a promise to answer to these in vCenter 6.0 version!

  Here is your answer. First of all, to use Chrome as your browser, then you need to go with at least 4vCPU * 32 GB of RAM & adjust the segment size of java for SSO, Tomcat, (TC) Management Server, inventory server and profile based storage to "refine" vCenter device with DB Oracle embedded or external memory. I did, and performance gains went 10 X. This includes the vSAN enabled running clusters. My recommendation that works very well based on design documents:

  vCenter Server inventory	VMware VirtualCenter Management Webservices (tc Server)	The inventory service	(Sps) profile-based storage service
  Large (more than 400 guests or 4000 VMS) stock	4 GB	12 GB	4 GB

  Setting on the vCenter server 5.5 of the memory unit

  • Connect the unit to vCenter server using SSH
  • VI /usr/lib/vmware-vsphere-client/server/wrapper/conf/wrapper.conf configuration file, locate the JVM memory section and change maxmemory to 4096

  Line 66

  # Memory #wrapper.java.initmemory = 512wrapper.java.maxmemory = 4096 JVM

  • /usr/lib/vmware-vpx/inventoryservice/wrapper/conf/wrapper.conf VI configuration file, find the setting. MaxMemory and replace it with 12288

  Line 116

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 12288

  • VI /usr/lib/vmware-vpx/sps/wrapper/conf/wrapper.conf find the setting. MaxMemory and change from 1024 to 4096

  On line 154

  # Size (in MB) maximum Java heap wrapper.java.maxmemory = 4096

  • Restart the vCenter device w / DB (1000 hosts) external /embedded for lab (100 guests)

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=2005086&sliceId=1&docTypeID=DT_KB_1_1&dialogID=294472825&StateID=1%200%20294492358

  Documentation Centre of vSphere 5.5

  PS: vCenter 6.0 has much better performance based on my beta test... so don't lose hope yet. Many improvements to come...

  PS: I've also broken down on this here until I figured this out just recently: Re: big client - vCenter 5.5 response time of the customer Web U1c / questions of Performance and Navigation

• Why not the customer answer my questions

  I sent support of services and the client twice today.  The first time last Thursday, but no response despite their promise of a response within hours.

  My organization will not open port 80, so I need to know where Captivate 4 reviews before loading when on the network.  If Captivate 4 is not on a network by default to download from the internet at the beginning upward.  However if you are on a network there a good 5 min delay why Captivate 4 trying to access a site through port 80.  I asked a technical support and service to the customer but no response.  When I know where Captivate tries to go to that my business will allow me to filter on port 80.

  Why not the customer answer my questions

  Hello

  I am at a total loss to explain why the customer is not answering your question.

  Have you tried to ask your IT people perhaps judicial investigations? I think that if Captivate attempts to communicate on port 80 that is sort of "calling home" to an Adobe web address any.

  I hope that get you it sorted! Rick

  Click here for Adobe Certified Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• vcops-custom: widget not configured

  Hi all!

  Last week I seted up vCOPS Enterprise + Hyperic to manage virtual and physical environment.

  Everything works like a charm.

  Vcops-custom, I found all the machines physical and virtual, and other things.

  But, I tried to create a dahsboard custom without success. I've added to this the work-health dashboard dashborad.

  I did all the configs but I always get the message "Widget not configured."

  What I am doing wrong?

  Best,

  Eduardo.

  You have selected option button 'Provider' under the title of the Widget.

  Other/similar suggestions: sometimes we have to look for where they put the buttons 'Save', according to Widgets

• Tablas of widget creation of

  Hola estoy buscando algun widget para creation of tablas in Muse, gratuito, alguna idea?

  Gracias

  You can try these options:

  http://musewidgets.com/collections/all/tables

  Thank you

  Sanjit

• Add files to custom widget

  Hello

  I created a .mucow widget that adds some css to the head, the html for the body and a script down.

  Currently the .css and .js, work, because I added the files to "add files to download" and in the code related to assets / directory.

  Now my question is, how do I add these files or the images to download them directly in the widget? I can save it as a .mulib and send it to a friend for example.

  Thanks in advance!

  Muse will display the content that will be added to the assets, in order to show the files, we will need to add them to our site, or on any page of the site.

  If you used the external links and the files are hosted with the online site, then using the library will pull up the external data and will be displayed on the page, then you should not manually add anything here.

  We can add files to the library, but export as xml and opening on another machine with Muse will not display the files that the site does not include assets.

  So, as you use external links, they works perfectly without add data manually or you can create a page and download all the assets that are used in file on this page, then the user can upload assets to link to the page, and then use in the .mulib file in Muse.

  I hope it clears the doubt

  Thank you

  Sanjit

• Hide Slide widget on question slides

  Captivate v5.5

  I have the slide number widget on my first slide, the value to display for the project - which works very well.

  However, I have a series of question slides toward the end of the project on which I posted 'Question 1 of 10 etc'.

  In these issues, I would stop the number of the slide (of the widget) being seen and then reappear again a few final slides.

  Is this possible and if yes, how would you please?

  Noel

  Hi Noel,

  No problem on CP5.5. Here are the steps:

  1. On the first slide of the issue, in the face of the drawer properties go to the accordion in Action
  2. On enter (slide) select hide, then choose the label of the widget
  3. On the first slide where you want to display the widget repeat once again, this
  4. but now, choose display and choose the label of the widget

  It would have been a problem in 5.0 because you could hide the widget, but not show it again on a later slide.

  Of course, the numbering will continue all in hiding, is this OK? So if you have 7 slides and widget is hidden on slides 3-5, on slide 6 it will show 6 out of 7.

  Lilybiri

• VeriStand "Custom Device" creation, including the different types of sources of code for simulation only

  Hello

  Before I ask my questions, I want to describe my problem:

  I would use VeriStand on a PXI system for simulation only. The simulation includes different types of sources such as Maltlab-Simulink-models, MultiSim SPICE models and code LabView for FPGAS-programming. Simulink models are available as a dll-file, generated with 'Real-Time-Workshop' and 'Simulation tool Kid. " They need to generate heavy duty, calculated by the modulation of the vector space and model the performance of a special converter. The MultiSim model will be transformed via a special VI in LabView code. I can generate code VeriStand (--> NI VeriStand--> Generate tools...). The PWM duty cycles of this dll matlab above are for LabView FPGA code entry. This will be the entrance of the gate of the tansistors of the MultiSim-model. Means, space vector modulation generates tension of the door and get the FPGA code to the ports of the inverter model.

  I am new in programming with VeriStand and LabView. I don't know how I can handle this. But NEITHER says it's possible. So my questions are:

  Is it possible to use VeriStand with more than one device Costum and simulate as a whole simulation. How can I associate different files.

  If this isn't the case, that I have to build a LabView Vi, where all the different sources of models are included.

  Is a walkthough or a user guide available, that I can use to fix my problems.

  I hope you can help out me. I need it for my bachelor thesis very fast. Thank you for your attention.

  Best regards Andre

  Here is a document describing how to create compiled LabVIEW templates and import them into NI VeriStand:

  http://www.NI.com/white-paper/12785/en

  The following link is a more general page describing several model and their support environments in NI VeriStand:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/6488

  Some additional modeling environments are supported, but not necessarily listed here since this is a growing list.  In addition, since NEITHER created a strategy of open model interface called NI VeriStand model framework, it would be possible to connect new types of sources of model in NI VeriStand without too much work.  Then the mapping tool, you found, makes the magic of easily to configure the connections of logical data between models.  You can also easily transfer each model to the individual processor cores, which contributes to the speed of calculation for system-level simulations.

• Custom layout manager: question sublayout

  Trying to implement a border layout manager (see the code), I'm having problem with the sublayout method. When the method is called, the value for the parameter "width" is 240, but the value for the parameter "size" is "1073741823' that really confuses me. I expect the value of "260" that I have tested on a simulator of Pearl.

  Can someone shed some light on this subject?

  JDE: 4.3

  Simulator: 8130

  Here is the code:

  class BorderLayoutManager extends Manager {
  
      public BorderLayoutManager() {
          super(Manager.NO_VERTICAL_SCROLL);
      }
  
      //overwrite the nextFocus method for custom navigation
      protected int nextFocus(int direction, boolean alt)
      {
          // Find the next field to be focused
      }
  
      protected void sublayout(int width, int height) {
      // calculate the position of each field, then call
      // setPositionChild() and layoutChild() for each field
      }   
  
     public int getPreferredWidth(){
      // calculate preferred width
     }
  
     public int getPreferredHeight(){
      // calculate preferred height
     }
  }
  
  public class MyScreen extends MainScreen{
      public MyScreen(){
          super();
          BorderLayoutManager manager = new BorderLayoutManager();
          manager.add(BorderLayoutManager.NORTH, new LabelField("North"));
          manager.add(BorderLayoutManager.SOUTH, new LabelField("South"));
          manager.add(BorderLayoutManager.WEST, new ButtonField("WEST"));
          manager.add(BorderLayoutManager.EAST, new ButtonField("EAST"));
          manager.add(BorderLayoutManager.CENTER, new RichTextField("center"));
          add(manager);
      }
  }
  

  If your custom Manager Manager has vertical scrolling enabled, then the height will show that this large number.

• SQLite / Widget undefined question

  I am developing a SQLite DB backend for a widget on a real device (9700 running 5.0.0.714) application.

  I get cannot convert not defined for an object when I try to refer to the database object.

  I guess that's because the database file is not created.

  Is there a way to specify the location of the file data on the SD card?

  Once the database file is created, I see in the list of the files in the device?

  TIA

  Oh duh! Now I can see it-thank you!

• Custom Widget development

  There are developers of widget here for rental?

  I need a specific image slider.  I searched all widget providers and it is not a widget that meets my needs.

  I'm not necessarily exclusive rights, then you would be free to sell it.

  It's for real estate Web sites, so many opportunities for sales.

  on this vid, you have your breakpoint set to high

  I don't use no matter what qooqee widget then maybe someone else wants to intervene... you may find this useful vid as well

  Slideshow of reagent - YouTube

• How to allow users of the site customer profile creation and customization

  Hello

  I'll put up a Web site that requires people offers the possibility to create their own profile data personal, a photo of profile etc.

  Through fishing trawl forums, there is a lot of information surrounding the creation of the registration of the user to access restricted pages (like a page all encompassing 'users'), but nothing about the automatic creation of a personal page by anyone who registers.

  With a number of pages on my site for registered users is unfortunately insufficient for my business - each registered user objectives MUST be accompanied by a profile page.

  Please help me!

  The feature you are looking for is not integrated into Adobe Muse. You may have to look for solutions outside what has the Muse.

• Tables: Custom govern and question of shading

  How do you change the color list in the drop-down list custom color in the dialog box to the power and the shading?

  Re: How to change list colors in the drop down list custom color in the dialog box to power and the shading?

  Unless it is changed in the FM versions later than mine, you can't. This drop-down displays the complete catalogue of the current color.

  If you need add a color, first set and add it to the CC with view > color > definitions

• Accrodion Widget Menu question

  Has anyone already used the Accordion widget in Adobe Muse to serve a menu? Im trying to get cela to fall upward and push the menu down as it appears.

  Here's an example www.linkinpark.com if you click the media button, it shows what I am trying to achieve. Searched a bit on this topic.

  All that is needed to do this is to make sure you check the option may close all. After that, remove all but one of the accordion panels, then place your vertical menu in the content area. Be sure to close the accordion before publishing.

  You can see it in action on this site: http / / www.josephinej.net (mobile version).

  I hope this helps.

  David

  http://www.creativemuse.co

• iBooks failures of Widget creation

  Hello

  I have errors and failures during export to iBooks edge Animate 2014.1.1 WDGT files

  Sometimes the exported Widget is just OK, some other times, without apparent reason, the .wdgt lack of document necessary inside the Info.plistfile. It's just not there.

  As a result, iBooks author rejects to insert the Widget because it shows an error of "A main HTML is not defined". I tried to created artificially this Info.plist to a work file existing one and include the Widget file with the correct settings, without success.

  Anyone else experience this erratic behavior when you create of Animate WDGT files?

  Thank you

  UPDATE: I found that if I export the Widget without an Image of the poster, then the Info.plist file is generated correctly and the Widget works fine...

  Just for info