iBooks failures of Widget creation

Similar Questions

• Tablas of widget creation of

  Hola estoy buscando algun widget para creation of tablas in Muse, gratuito, alguna idea?

  Gracias

  You can try these options:

  http://musewidgets.com/collections/all/tables

  Thank you

  Sanjit

• Custom Widget creation questions

  Hi all is there,

  I don't know if this is the best forum to post this question but I'll try, maybe someone could help me.

  I'm working on an e-Learning project, all content (texts, graphics and audio) are ready, I just put them in a very complete presentation

  To create the presentation, I buy Adobe eLearning Suite.

  For my presentation, I want to have some sort of bar menu at the top of my slides and to do that I started creating a custom widget.

  The menu bar is created with Flash (AS2) and animation are friendly (it was the easy part)

  Now my problem is how can I bind the button actions to my Captivate project?

  I have 10 buttons action should be to move the presentation to a specific slide.

  I try to do with the cpCmndGotoSlide property, but that seems not work

  I also have another interrogation, "exporting" properties of my widget to Captivate to aim for each button slide number?

  Can you please give me a pointer to web sites that explain this?

  I read somewhere that it is possible to pass XML parameters, but I can't find how

  Can you also recommend a book?

  Thanks in advance for any comment or suggestion

  Best regards

  Fabrice

  Even if you don't place in the widgets folder, it can be inserted as a widget by insert > Widget or by pressing Ctrl + Shift + W

• Satellite L450D-failure of the creation of recovery disks

  I just bought the laptop above and tried to create discs of recovery twice.
  Both times, there is no on the first DVD with the following error message:
  Differences between the following files
  D:\HDDRecovery\ODDFiles\sources\boot.wim source path
  E:\sources\boot.wim path target
  0216F-3 c-00000000 error code

  I found a similar position on a Google search that gives to think that there is nothing I can do about it except contact Tohiba and get the recovery media unless the disc is damaged.
  I'm certainly not ready to pay for these discs, because it is not my fault that I can't create them.

  Is there something I can do and what advice can be given on the replacement for the recovery discs?

  In my opinion, there are two options for you:
  -contact your local agent where you bought your laptop and ask for replacement or
  -Contact nearest Toshiba authorized maintainer and explain the situation.

  I imagine that they can order one for you and it will be covered by the warranty.
  Do not wait for a long time and do it as soon as possible.

  One last thing:
  Can you please test if HARD OS installation disk works properly? Start as described in the follow-up paper - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

• 305006: failure of the creation of translation portmap

  I'm pretty new to all these cases firewall so my apologies in advance if what I ask is obvious to more experienced people.

  I have two servers inside my firewall and I'm testing the connectivity through my CISCO PIX 515E ping from one PC to the outside.

  My server far beyond the firewall has an IP address of 192.168.2.105.

  The other server has two network adapters, 192.168.2.106 and 192.168.1.107.

  Iface inside the firewall is 192.168.1.1.

  Iface outside the firewall is a.b.c.39

  PC outside is a.b.c.1

  I have the access rules for ICMP on the inside interface and external interface (allow a whole icmp).

  I set up a static NAT between 192.168.1.107 and external interface.

  I've implemented a global pool on the external interface and a dynamic NAT rule.

  My Setup has the following...

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0

  public static interface (inside, outside) 192.168.1.107 netmask 255.255.255.255 0 0

  When I try and ping the PC outside since the closest server to the firewall (192.168.1.107), it works fine. The static NAT rule means that my external PC thinks he received an a.b.c.39 IP address ping request and luckily sends its response.

  But when I try and ping 192.168.2.105 no ping request arrives on the PC from the outside.

  Instead I get a message in my PIX device manager saying "" 305006: failed to create translation portmap for icmp src: inside the Server1 dst outdoors: userPC1 ".

  Can someone tell me what I am doing wrong?

  Remove the Static statement and access to 192.168.2.105 should work. It seems to me that the static statement is the dynamic substitution of your NAT. When you have that one public IP (interface) address, you must use the static to the Port Redirection statement only, and not a static definition of 1 to 1.

  Kind regards

  Jayson

• AFLayoutText causes a failure in the creation of appearance

  In Acrobat 11 I use AFLayout object to create the appearance of the annotation. I have background and text on it. Everything seems fine, but when I use the AFLayoutText method as in the example below it also creates a null CosObj. Without the text method works very well and the appearance is created correctly. Am I missing something?

  Thank you

  ASFixedRect rect;

  PDAnnotGetRect (annot, & rect);

  Presentation of AFLayout = AFLayoutNew(& rect, pdRotate0, cosDoc);

  / / at the border and background

  AFPDWidgetBorderRec border;

  border.nStyle = AFPDWBSolid;

  border.nWidth = 0;

  PDColorValueRec = brdrColor { PDDeviceRGB, { fixedOne fixedZero fixedZero fixedZero }};

  PDColorValueRec = bkndColor { PDDeviceRGB, { fixedOne fixedZero fixedZero fixedZero }};

  AFLayoutBorder (layout, border, brdrColor & bkndColor, false);

      text

  TextAppearance_t your;

  SetDefault_TextAppearanceP(& your);

  AFLayoutText (layout, false, fakeand border, & ta, 'OK');

  / / create stream cosObj

  CosObj cosN is AFLayoutCreateStream(layout);.

  AFLayoutDelete (layout);

  AFDrawText solved my problem

• Fusion MiddleWare failure of the creation of the field facility

  Operating system = Red Hat Linux AS 5 64 bit 4 GB memory
  WebLogic version = 10.3.4.0 wls1034_generic.jar
  RCU = ofm_rcu_linux_11.1.1.3.3_disk1_1of1.zip
  JRocket = jrrt - 3.1.2 - 1.6.0 - linux - x 64 .bin
  
  
  
  The WebLogic Console works fine
  
  Install only Oracle Forms and reports
  
  
  
  Question
  
  Cannot create domain in the right configuration issue of binder section.
  
  
  Log shows:
  
  oracle.as.provisioning.exception.ASProvWorkflowException: workflow runtime error.
  at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
  at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
  at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
  
  
  
  A tried
  
  RCU. Properties change the entry below:
  
  DTD_LOCATION=%RCU_HOME%/RCU/config/
  
  
  Oracle Magazine document 854117.1
  
  
  
  Signs of welcome.

  With the help of WLS version 10.3.2 is the answer.

• Newly created profiles don't be loading not/are not created properly

  Windows Server 2008 R2 I have an administrator account that works.

  I wanted to start earning several accounts for others to use, but met with questions.

  Any profile that I create (standard or admin) cannot connect. I get the "Profile Service could not load... blah blah."

  A little digging revealed that the guest account also has the same problem, and that it creates no new profile I create received a profile under C:/Users folder.

  "C:/users/administrator" and "C:/users/Public" exist, however no records exist for all new profiles I create, or for the guest account (I'm not entirely sure a guest account gets a property.) I've never really played with guest account before).

  Windows always recognizes the profile, I created. Enter user accounts shows that there are three profiles (Admin, guest and that I did). Can I change the password and others on new accounts.

  Also, inside the register, I noticed that there is the file '$-1-5-... '. "Admin and some other networking and other things, but a single folder for profiles; the administrator. Nothing for the new account I created. I didn't take these files before, which means that I didn't manually delete the registry files/folders for the user accounts.

  I'm sure this is the folder of registry administrator account because the data file "ProfileImagePath" says "C:\Users\Administrator.

  I think it's all under "HKey_Local_Machine/Software/Microsoft/Windows_NT/CurrentVersion/Profile List.

  So what's happening? I don't want to reinstall or do a system restore.

  I've always had this problem since the first profile, I created. However, by the time (months ago) I didn't know it's this deep. I've linked it to accounts via Remote Desktop and thought it was a problem with some settings of remote desktop.

  Sooomewhere I read that Google Updater and chromium could cause Corruptions of profile. There is no Chrome. However I do not think that there is corruption. It's just too bad about the failure of the creation of user folders > _ >

  Hello

  The question you have posted is adapted in the Microsoft technet forums. I suggest you post in the Microsoft technet forums to improve the assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope that helps.

• Help with CSC in ASA

  We have installed an ASA5510 with SCC module. SCC Module IP is set to 192.168.10.254. Inside the ASA5510 IP is 192.168.10.1.

  Our local network is 192.168.1.0 subnet. Because all routes are configured correctly, we are not able to ping to the CSC 192.168.10.254 interface. We can access 192.168.10.1 with no problems. What follows is the newspaper of the ASA when we try to ping.

  3. June 29, 2007 17:40:06 | 305006: failure of the regular creation of translation for icmp src Interior: 192.168.10.254 internal dst: 192.168.1.181 (type 0, code 0)

  and it is the newspaper when we try to access in ASDM.

  3. June 29, 2007 17:41:13 | 305006: failure of the creation of translation portmap for tcp src inside:192.168.10.254/8443 dst inside:192.168.1.181/1677

  6. June 29, 2007 17:41:10 | 106015: Deny TCP 192.168.10.254/8443 to 192.168.1.181/1677 flags SYN ACK on the inside interface (no link)

  However, I can connect to the ASA via the VPN from home and everything works fine.

  1. to solve the problem of not being able to ping all of the Web sites, you must allow the ping response in your list of outside access

  access list outside extended permit icmp any any echo response

• Access DMZ

  Reposting because it has got a little buried...

  I have a PIX 515e with a DMZ interface. This interface is an FTP server.

  I can access the internet from inside LAN and DMZ server. The internet can access the server in DMZ for FTP - ing. However, the inside LAN cannot access the FTP server. I have a static mapping inside the DMZ:

  static (inside, dmz) 172.16.255.254 192.168.40.250 netmask 255.255.255.255 0 0

  But when I try to access the FTP, it indicates that the connection is refused. I don't have an ACL configured to allow access. I didn't think I should because I'm leaving a higher to a lower security zone, but maybe I'm wrong.

  I also tried the bit 'alias' another post. No luck.

  The PIX version is 6.3 (3). The IP address of the client is 192.168.40.10, the IP address of the server in the DMZ is 172.16.255.254. Fixup protocol ftp 21 is enabled. The syslog says:

  305006: failure of the creation of translation portmap for tcp src Interior: 192.

  168.40.10/51886 dst dmz:192.168.40.250/21

  I looked in a few places to see if I could find a resolution based on what I saw in the system log, but it seemed that few suggestions were applicable. One who was (by emptying the translations) has not helped.

  Thank you very much everyone, you all have really helped.

  Hello

  For the verification of references with this URL:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a008015efa9.shtml

  The URL above is for access to Mail on DMZ server, but you can override this to your FTP server.

  Let me know if this helps or need extra help.

  Jay

• Sorting for the pivot 5 APEX error

  Hello

  Has anyone encountered the following error when trying to make a kind of pivot with more than 1 sort column? If so, what is the solution?

  {'dialogue': {'uv': true, 'line': [{'V': "failure of Widget}]}}

  AJAX\u0020call\u0020returned\u0020server\u0020error\u0020ORA\u002D01403\u003A\u0020no\u0020data\u0020found\u0020for\u0020worksheet. »}]}}

  If we make a kind of pivot with sort 1 column, the results are always returned without any error. I just created a SR this topic because I think it could be a bug.

  Version of the APEX - 5.0.0.00.31

  Version of DB - 11.2.0.4.0

  APEX via OSH/mod plsql

  Kind regards

  David

  Just to let everyone know that after raising a SR, they confirmed that this is a bug and it will be fixed in version 5.1. This bug is in each version of the APEX 5 so far.

  Kind regards

  David

• Are there special permissions (file access) required for reports write to temporary files?

  Report BUILDER 11.1.0.7 (64-bit)
  

  Form builder 11.1.2.1.0 (64-bit)
  

  Windows 7 Pro 64-bit

  Java:

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  IDAutomation LinearBarcode.jar

  
  

  I have a report that prints the data with bar code on the detail rows in a report.  It uses the Java LinearBarcode.jar by Idautomation package for this purpose.  The Java package contains an encoder that returns a bar code in the form of a GIF image to a field on the report.  One of the arguments that it requires is a name of temporary file generated by srw.create_temporary_filename ().  When it works perfectly, and it creates the temporary image file in my folder tree 'House' (C:\Users\ < username > \AppData\Local\Temp) run under the report generator.  When I run this report generator with fast running behind her I can watch the report search, open, read and close this file LinearBarcode.jar several times for successive lines of the report.  Everything seems to be very good in the generator.

  The fun begins when I try to call the same report from a FORM (Form Builder fleeing), where he fails every time, somewhere in the image generation stage.  In my view, that it fails to the creation of the image itself, when he tries to open the file for writing temporary image.  I can find the empty temporary files left after the report runs and fails, but the size of the file is zero byte.  When I run this report of my test form with Microsoft quick run behind it I see the report search, open, read and close this file LinearBarcode.jar for the first line of data in the report, then the report fails.  So, I know that the .jar file and the required REPORTS_CLASSPATH/CLASSPATH entries are synchronized with the location of the .jar file.  The report runs, and he finds the LinearBarcode.jar, it opens, it reads and closes it.  What I do is to not see any activity related to the image itself temporary file.   Thus, failure at least gives the impression of being in the image create step itself, which makes me doubt the safety of Java.  However, there is no message popup on Java security problems.

  I tried implementing Trace for reports, but also, that does not give something of use, except to confirm that the report is certainly a failure in the creation of barcode code somewhere.  This is known from the error message in the log file: fatal error REP-1401 < barcode create procedure name >

  I'm guessing that he might be a missing 'writing' somewhere authorization prevent the creation of the temporary file used to generate the barcode image file. This error only occurs under Java (run from a form). I was not able to find something about it by reading everything I could find on the OracleBarcode.jar demo.  I also not found anything in Google searches that does not count.

  Are special permissions to allow these operations to temporary file as shown above?  If Yes, where and how are they set?  If this isn't the case, else anyone seen this issue before?

  Thanks in advance

  Hank

  Resolved: This issue had nothing to do with the creation of barcodes. It turns out that there is a field in the State who had no defined source. It was not rendered because it was hidden by a format trigger. It seems that this case is handled by the constructor, but blew the engine in the reporting process used when a report is called by the forms. It took a long process of elimination, elimination of triggers, fields, parameters, and even the generation of bar code code until I found it.

  Thank you

  Hank

• Weird APEX error when refreshing of report

  Hi all
  
  I am trying to refresh a report with dynamic action. And get the following errors:
  
  {'dialogue': {'uv': true, 'line': [{'V': "failure of Widget}]}}
  ORA-20876: stop the engine of the APEX.
  classic_report"}]}}
  
  I have identified the problematic part. I have a selection multiple selection list and my query goes like this:
  

  select o.order_id, s.salesrep_name
  from ml_orders o, ml_order_salesrep_mapping m
  where m.order_id(+) = o.order_Id
  and case when :P22_SALESREP is null then 1
  when :P22_SALESREP IS NOT NULL and m.salesrep_id in (:P22_SALESREP) then 1
  else 0
  end = 1

  Before this line:

  when :P22_SALESREP IS NOT NULL and m.salesrep_id in (:P22_SALESREP) then 1 

  used to be just

  when :P22_SALESREP IS NOT NULL and m.salesrep_id i=:P22_SALESREP then 1

  and it would work. But have the obligation to make this selection multiple selection list.
  
  Any help appreciated.
  
  Using Apex 4.2, click Classic report with refresh by dynamic action on the button.

  William Wallace says:

  I am trying to refresh a report with dynamic action. And get the following errors:

  {'dialogue': {'uv': true, 'line': [{'V': "failure of Widget}]}}
  ORA-20876: stop the engine of the APEX.
  classic_report"}]}}

  I have identified the problematic part. I have a selection multiple selection list and my query goes like this:

  select o.order_id, s.salesrep_name
  from ml_orders o, ml_order_salesrep_mapping m
  where m.order_id(+) = o.order_Id
  and case when :P22_SALESREP is null then 1
  when :P22_SALESREP IS NOT NULL and m.salesrep_id in (:P22_SALESREP) then 1
  else 0
  end = 1
  

  Before this line:

  when :P22_SALESREP IS NOT NULL and m.salesrep_id in (:P22_SALESREP) then 1 
  

  used to be just

  when :P22_SALESREP IS NOT NULL and m.salesrep_id i=:P22_SALESREP then 1
  

  and it would work. But have the obligation to make this selection multiple selection list.

  It does not work like that. In

  select * from table where columnvalue in (7788, 7839, 7876)
  

  (7788, 7839, 7876) is a list of expressions , and the predicate is evaluated as a membership condition.

  In

  select * from table where columnvalue in (:P1_X)
  

  : P1_X is a scalar string, unable to contain multiple values.

  See +different items in the listmore about ask Tom, and +imitating the features of chain at the table using sql+ for possible solutions.

  In a report of APEX type, use a source to report the body of the PL/SQL function returning a SQL query with lexical substitution to produce a "variable list:

  return 'select * from emp where empno in (' || :P1_X || ')';
  

  where P1_X has been sanitized for SQL injection and the value chain are properly indicated if necessary.

• Errorrrrrrrr in OnganizationCreateTransaction

  Hi again girls and boys:

  My new problem is that I can't create an organization that uses the web service API v9 (through... / WSTester/Login.aspx)...

  In any case, I get the same error:

  
  nEntityRef-1
  RET API_ERROR
  sMessage failure during the creation of the organization. In detail: Object Reference not set to an instance of an object.
  Infra.API.Test.ClientCompanyResponse Status Code

  I put the settings as I show in the img attachment.

  Do you know what happens?

  Thanks in advance

  You need not supply all parameters. It will default everything it can and will prompt you for all those required. Also if you want to specify a reference to a field list of choices (those that start with l. e.g. lParentCompany), you must precede it with a tilde. Otherwise, use a search by name/display string.

  So you say a company called Synergy Inc. with ref 5 and that you wanted to put as a parent, you can use

  lParentCompany = "~ 5".

  or

  lParentCompany = "Synergy Inc."

  using lParentCompany = "5" does not correspond to a company

• How to convert .fr in CS6 using eveconverter.

  Hello

  I'm trying to convert file .fr in CS6 using eveconverter.

  The parameters are:

  InDesign CS6 SDK\devtools\eveconverter D:\Adobe > eveconverter-i "D:\Adobe InDesign CS6 SDK\ Scr\Sample\Resource\Sample.fr" s "D:\Adobe InDesign CS6 SDK.

  I also added 'EveInfo.fh' in the file .fr

  But it does not work and shows following errors:

  Error: definition of frame not found in the block Definition dialog box : file name sample.fr

  Record of failure

  Widget ClusterPanelWidget Widget name ID kWidget1ID

  Widget CheckBoxWidget Widget name ID kWidget2ID

  Widget CheckBoxWidget Widget name ID kWidget3ID

  DropDownListWidget the name of the Widget ID KWidget4ID widget

  Widget StaticTextWidget Widget name ID kInvalidWidgetID

  Widget ButtonWidget Widget name ID kWidget5ID

  Widget MultilineTextEditBoxWidget Widget name ID kWidget6ID

  Widget StaticTextWidget Widget name ID kInvalidWidgetID

  Widget ButtonWidget Widget name ID kWidget7ID

  File Name Sample.fr

  If someone has done this please let me know.

  Thank you in advance.

  Priyanka

  Hi Priyanka,

  in the definition of your widget, you need to set the geometry information

  Frame (0,0,200,200)

  not like

  0,0,200,200,

  that was possible without the day BEFORE.

  Markus