Table 1 d of chain to loop

Similar Questions

• Table 1 d in the while loop problem

  Hello world

  I searched this problem in the forum, but seems only some positions quite didn't answer.

  I'm stuck by saving the data in a while loop.

  I have a while loop, within which there are two exits in each iteration, I want to add to a table, and then after the while loop is completed, I want to combine these two tables in a 2D array (since the release of them must be a pair in my case).

  I tried 'Build array' and 'transpose array' and 'write in spreadsheet' element set, which maintains concerns me is how simply to add the result in a 1 d table during each iteration, these 2 outputs are in digital format, which prevent to directly create a table for it.

  Any idea is appreciated,

  Thank you

  Chen Kunsheng

  Here are some other ways to insert.

  It may be useful

• Table table 2D to shaped chain

  Is this possible. I've included a bit of code I'm working with.

  I'm trying to save a group of data which, as the time stamp, a double and a 2d array in a csv file. I got to the point where I am to convert the timestamp and double chain but I guess I was not able to change 2d to string. Or y at - it another way to do it?

  Help, please

  Note attachments removed by the request of the user of the admin-

  Use table string of spreadsheet on the palette of the chain.

• animated GIF melted chained between loops

  I know how to make an animated gif that fades chained in itself, but when I put it a continuous loop, how to get crossfade loops each other?

  I guess you do first executives and the last of the Gif, the same, but their time combined total time you want for this image. Do a crossfade at each end of your sequence of images.

• How to convert boolean 1 d table to leave everything in a loop?

  I had initially a > = block to get out of this while loop and it worked fine. I wanted to add a second condition to exit the while loop, using a > = block, so I run both in a block of GOLD, and I get a cut wire. I don't understand why one works but the other does not.

  The background does not work with or without the block of GOLD.

  

  If your goal is to stop based on the GOLD of the two State, more than 720 'OR' any value that is greater than or equal to 0.5, you will need to 'OR' the picture coming out of equal or greater than 0.5.

  

• How to update table pl SQL by using the loop

  Assuming I don't have only one table: members_tbl which columns are: SN, FN, DB, IDDBL, FLAG, DBLCRIT

  I need to update the table if certain conditions are OK with this algorithm:

  id_dup: = 1;

  (I, 1 to Nrow (members_tbl)) THEN

  {

  ((I + 1) J to Nrow (members_tbl)) THEN

  {

  IF (members_tbl (i) .iddbl IS NULL) THEN

  members_tbl (i) .iddbl: = id_dup

  IF (((members_tbl (i). DB is members_tbl (j). DB)

  AND (UTL_MATCH.jaro_winkler_similarity (members_tbl (i). SN, members_tbl (j). (SN) > 80)

  AND (UTL_MATCH.jaro_winkler_similarity (members_tbl (i). FN, members_tbl (j). FN) > 80))

  AND (members_tbl (j) .iddbl IS NULL)) THEN

  {

  members_tbl (j) .iddbl: = id_dup;

  members_tbl (i) .flag: = 1;

  members_tbl (j) .flag: = 1;

  members_tbl (i) .dblcrit: = 1;

  members_tbl (j) .dblcrit: = 1;

  }

  }

  id_dup: = id_dup + 1;

  }

  Is there a way to write this algorithm in a pl/sql procedure? I'm relatively new to PL/SQL, and I've never written a stored procedure.

  IDDBL is a NUMBER yet, there may be several duplicate rows.  How you expect store multiple values in a single issue?

  SQL > select m.idm
  2, m.sname
  3, m.fname
  4, m.dbirth
  5, listagg (m2.idm, ',') Group (order of m2.idm) as dups
  members_tbl 6 m
  7 left join external members_tbl m2 (m.idm! = m2.idm)
  8 and m.dbirth = m2.dbirth
  9 and utl_match.jaro_winkler_similarity (m.sname, m2.sname) > 80
  10 and utl_match.jaro_winkler_similarity (m.fname, m2.fname) > 80
  11                                          )
  Group m.idm 12, m.sname, m.fname, m.dbirth
  13.
  IDM SNAME FNAME DBIRTH DUPS
  ---------- -------------------- -------------------- --------------- --------------------
  BOLOREY JEANNE 05/11/1955 126 125 223
  126 BOLLOREY JEANNE 05/11/1955 125 223
  153 BALORE GIANNE 05/11/1955
  223 ABOLLOREYY JEANNE 05/11/1955 125 126
  225 RELIABLE MARINE 25/04/1963 228 230
  228 LOW MARYANE 25/04/1963 225 230
  LOW 230 SAILOR 25/04/1963 225 228
  235 LIPARK JACQLINE 20/12/1939 237
  236 ILIPARC JACQUELYNE 20/12/1939 237
  237 LIPARC JACQUELHINE 20/12/1939 235 236
  240 RINTET MALIKA 08/07/1954
  241 GRISION RAUGER 26/10/1931 242-245
  ROGER 10/26/1931 241 GRISION 242

  
  245 GRESION RAUJER 26/10/1931 241

  14 selected lines.

• Creating a table of the rings by program

  Hello

  I'm using node [] StringsAndValues for the creation of a ring with defined values.

  

  I wonder if it is possible to define a table of rings and chains of different values for each item in the ring in this table... I've been struggling with this problem but couldn't find a way out. The problem is the property node takes the last value of the loop.

  

  Of course, my approach on the property node is false. Thoughts alternatives-suggestions?

  See you soon,.

  Palazzo

  
  

• Run the procedure by table number

  Hello
  
  Oracle 11.2.0.1
  Windows
  
  Create the np_type type is varray (3) of the number
  /
  
  Create the cn_type type is varray (3) the number;
  /
  
  Create the cxn_type type is varray (3) of varchar2 (2000)
  /
  
  I created the TEST table by pl/sql block below:
  
  declare
  execstr varchar2 (2000): =' create table test(';)
  Start
  because me in 1.80 loop
  execstr: = execstr | 'col ' | TO_CHAR (i) | 'number,';
  end loop;
  execstr: = substr (execstr, 1, length (execstr)-1);
  execstr: = execstr | ')';
  dbms_output.put_line (execstr);
  run immediately execstr;
  end;
  /
  
  create the table sp_table (Splitid number, Delimiterlength number);
  insert into sp_table values (1.4);
  insert into sp_table values (2.7);
  insert into sp_table values (3.9);
  insert into sp_table values (4.1);
  insert into sp_table values (5.2);
  insert into sp_table values (6,6);
  
  
  create or replace procedure myproc1
  (
  STRX in varchar2, delarray in np_type)
  as
  execstr varchar2 (2000);
  CN cn_type.
  CXN cxn_type;
  XPos number: = 1;
  Start
  execstr: = ' insert into test values(';)
  because loop me in 1.3
  Select Delimiterlength in the sp_table (i) cn where Splitid = delarray (i);
  CXN (i):=substr(STRX,XPos,CN(i));
  execstr: = execstr | CXN (i) | ',';
  XPos: = (i) cn + xpos;
  end loop;
  execstr: = RTRIM (execstr, ','). ')';
  dbms_output.put_line (execstr);
  -execution immediate execstr;
  end;
  /
  
  

  SQL> declare
    2    v np_type:=np_type(4,4,4);
    3    begin
    4    --dbms_output.put_line(v(3));
    5    exec myproc1('111',v);
    6    end;
    7  /
    exec myproc1('111',v);
         *
  ERROR at line 5:
  ORA-06550: line 5, column 8:
  PLS-00103: Encountered the symbol "MYPROC1" when expecting one of the
  following:
  := . ( @ % ;
  The symbol ":=" was substituted for "MYPROC1" to continue.
  
  SQL>

  The procedure above will insert the numbered string supplied in the test table that splits the chain numbered inspires provided splitids of sp_table.
  
  In fact, I tried to help a member of the forum for his question, but I'm not get where I get the above error. Of course, there is little that miss me, but not that. This thread is running too in this forum.
  
  Please help me.
  
  Concerning
  Girish Sharma

  create or replace procedure myproc1
  (
  strx in varchar2, delarray in np_type)
  as
  execstr varchar2(2000);
  cn cn_type := cn_type(null, null, null);
  cxn cxn_type := cxn_type(null, null, null);
  xpos number:=1;
  begin
  execstr := 'insert into test values(';
  for i in 1..3 loop
  select Delimiterlength into cn(i) from sp_table where Splitid = delarray(i);
  cxn(i):=substr(strx,xpos,cn(i));
  execstr :=execstr || cxn(i) || ',';
  xpos :=cn(i) + xpos;
  end loop;
  execstr := RTRIM(execstr,',')|| ')';
  
  dbms_output.put_line(execstr);
  --execute immediate execstr;
  end;
  /
  

  and

  declare
      a1 number :=4; a2 number :=4; a3 number :=4;
      v np_type:=np_type(a1,a2,a3);
      begin
      for i in 1..3 loop
      dbms_output.put_line('v(' || i || ') = ' || v(i));
      end loop;
      myproc1('111',v);
      end;
  /
  

  Your varrays are null or empty in myproc1

• Creation of object table references

  Hope that the title is clear enough, but what I want to do is create multiple tables to contain groups of clips (I use as buttons) that have similar functions, so that I can add event listeners using a loop statement, rather than a huge list to add and remove event listeners.

  I saw this method of work before, but I can't get my code works! It is probably a concept very noob, but I've been struggling with it for hours.

  OK, so in her extends video clip bit on my file I declare the array as such:

  public static var controlBtns:Array;

  Then in initialization function, I put the values in the table as such:

  controlBtns = new Array (submit_btn, zoomMinus, zoomPlus);

  In this same initialization function I yell to another custom function that adds to the elements of the array event listeners:

     for(var i = 0; i < controlBtns.length; i++)
     {
      trace(controlBtns[i].name);
      controlBtns[i].addEventListener(MouseEvent.ROLL_OVER, function(){controlBtns[i].nextFrame()});
      controlBtns[i].addEventListener(MouseEvent.ROLL_OUT, function(){controlBtns[i].prevFrame});
      controlBtns[i].mouseChildren = true;
      controlBtns[i].buttonMode = true;
     }
  

  
  The track seems out of all object names (as they appear in the library) and then I get this error:

  TypeError: Error #1010: a term is undefined and has no properties.

  That is kind of obvious that I can not access the movie clip instance names I put in place in the table.

  I have tried to put quotation marks around the names in the table, which makes them chains but then I can't access properties of strings - what is pretty obvious to.

  There is something really simple that I'm missing here?

  Thank you much in advance flash users...

  It would be much better way:

  // in the loop
  controlBtns[i].addEventListener(MouseEvent.ROLL_OVER, onRollOver);
  controlBtns[i].addEventListener(MouseEvent.ROLL_OUT, onRollOut);
  
  // later
  function onRollOver(e:MouseEvent):void {
       e.currentTarget.nextFrame();
  }
  
  function onRollOut(e:MouseEvent):void {
       e.currentTarget.prevFrame();
  }
  

• Table 2D

  Hello

  It could be simple, I did not thing to do. When I'm not looking 'A' he combines 2D data table with information in the input table. Similarly, if do A search and B using an entry level search. I need select and display the info of A and B in the 2D output table.

  

  guidance on how to get it.

  I would like to return your curls.  AutoIndex on the input on the outer loop array and autoindex on table of research on the inner loop.  You must also use the output autoindex on the outer loop.

  

• How to read the worksheet for setpoint speed using the speed control (Closed Loop)

  My VI is able to go through a series of speed reference points that lie in a sort of constant matrix. I have to be able to go through a series of hundreds of game points, and fill in the constant table whenever I have a new profile to test don't will not work.

  I tried to use a reading of block of spreadsheet and table of Index to read values from a worksheet, but when I run the program, it does not seem to read the values in the file.

  The path must be correct, but I don't know if there may be a problem of formatting with file worksheet regarding the delimiter. Or maybe not all the parameters are filled with reading block of spreadsheet.

  Anyway, any help with my problem would be appreciated. I'll give the VI as an attachment to this post. Nine set points which worked with the VI are in the constant blue table, which was previously set to where the entire Long block is now fixed.

  Brandon

  Hi Brandon,.

  That's right, I withdraw my previous response. I apologize to this topic.

  I noticed that in your code, you select the line at index 0 instead of the first column. When you use the table to Index out of the loop block, make sure that you select the column at index 0 so you can enter the first column in the input file. This should get you 1 d table you're looking for.

• How to make shift register init happens only once, so that the data can persist across multiple tracks of a loop?

  Here's the situation:

  We are repeatedly followed eight real-world signals and comparing them to a threshold value.  We do this via a loop For inside a While loop.  The loop For runs eight times per pass.  We have implemented a binary table 1 d and the use of the index of the loop For as the array index, by putting a Boolean result in the table using the function replace table subset.  We want to keep the data in the table to be 'sticky', in the sense that any True value is locked, so even if a fake comes later, this array element true.  However, since we initialize the array in order for the replacement to the work table, we see that whenever the loop For again, it resets the table and destroys the history.

  I have attached a simple VI to illustrate the concept, using a random number generator as a stand-in for the real world signals.  How we change this VI do and entered real lock through multiples for loop runs, indefinitely?

  In case it is not obvious, I am a relative beginner, so please keep count in your response.

  Thank you

  B

  scottbbb wrote:

  For B, although I love the simplicity of it, I have a question: it solves the problem of the re-initialization?  What the shift of the While loop register get initialized - only once during its launch?

  Yep, the shift register Initializes only at the beginning.  You could say that every time the while loop is called (not each iteration) the shift register is reset with the wrong table.

  And, Yes, GOLD will always keep a REAL when it is TRUE.

  Usually, the simplest solution is the best.

• set items in the cluster of typedef double tables

  Hello

  I have a cluster of type def. This group includes 16 double tables, the size of the arrays are identical, but can change during execution.

  I would like to write data from table to this cluster in a loop, where I get the berries during the iterations of a PDM file. If the loop will iterate 16 times and every time I should put something in the cluster preceding the recent read double table.

  What would be the easiest solution here, since I can't use the 'Cluster to table' here and cluster table saw... ?

  Thank you!

  I don't know if it's necessarily easier, but if you change the typedef cluster so that it instead contains 16 clusters and each cluster contains a single element which is a 1 d array, then you will be able to use the Cluster to table and table to the Cluster, although you'll have to do an additional unbundling/package inside the loop for.

• Save and write data from table to table - easy

  Hello

  I got this system delivered to me. I'm new to LabView and just save the data from the table "average voltage" (inside the while loop) to do some additional testing of our product.

  I will like to do similar to this.

  (1) save in excel file.

  (2) save only when a button button and save it then 5 ilteration.

  (3) save and manipulate the data, so it is displayed in 6 columns (each LED 1) instead of 1 long colum.

  I tried different things with structure business T/F, which resolved the buttom-request. But I am in doubt I should use, writing to the file of the measurement or write to us to the worksheet (by using labview 15.0)-delimited according to my offer the best possible?

  He also seems to be too much to handle when I try to write in txt file, because it pops up with and error that I do not know how to fix, but it says this:

  Error-200279

  Possible reasons:

  The application is not able to cope with the acquisition of equipment.

  Increase in the size of buffer, most frequently the reading of data or by specifying a fixed number of samples to read instead of reading all available samples would correct the problem.

  Property: RelativeTo

  Corresponding value: current playback Position

  Property: Offset

  Corresponding value: 0

  Task name: analog channel

  Thanks in advance

  I agree with Taki, but want to make some additional remarks:

  • LabVIEW is a data flow language.  Think of the "flow" of your data.  You talk about "save only when a key is pressed" and a finite set of data.  You are collecting before the press the button and everything just do not save?
  • Data are collected at some rate, and likely, you don't want to "Miss" data points.  This means that you shouldn't do anything in the loop of the Collection that takes a long time.  If your recovery rate is low and your treatment is fast, you can have everything in a single loop.  Otherwise, to use the technical stream (producer/consumer is a good) to process the data in a single loop in parallel with the collection in a loop independent (and asynchronously).
  • How do you write your data?  You want to write "on the fly", as it is, or can you wait, collect everything, any format and then write it "all at once"?
  • What do you mean by 'save the file in Excel?  Do you mean a 'native' Excel file, one with the extension .xls or .xlsx?  Do you mean a Comma-Separated Variable (.csv) file this reading peut of Excel (and, indeed, usually registers itself to read, change the icon of the .csv files to "look like" it is really an Excel file)?  If the first case, I recommend using the report generation tool.  But for the latter, you can also use write delimited spreadsheet, which can be easier to use.

  Bob Schor

• Update loop under Vi of hand / run multiple Instances

  Hey everybody,

  If I want to keep my code as modular as possible so that I can see any sub or VI.

  One of the SUB vi is permanently offices incase another output is detected. I don't want to make this mark on the main level because I don't want a huge loop in my main.vi and you won't worry about sending shift register valuse to my Subvi for him to function.

  Essentially, I have designed this subroutine Vi and am now trying to constantly be driven from a main.vi

  This hand is simply.

  Cluster of entry--> Sub VI

  Void VI retains a loop waiting for a change request action. Unfortuantely when I change the vale in main.vi the avlues in Subvi don't update. I guess that makes sense, in C, for example when you call Returns you need to wait until the end of the function call to update. Yet, as Labview is so strongly focused on taking SUB vi to do almost everything for you, I can't imagine labview is not able to update these values. I looked around and the answer seems to be global variables. I really don't want to use the because my application will become very big, but I'll use them if I need to.

  Unforunately, when I tried to use my global variable thing, it didn't work.

  1. global Var = Cluster

  2. it's in the Subvi both the main VI.

  3. when I run my code the global variable is not up-to-date on both front sides when I change one of them. I'm doing something wrong?

  A few comments.

  • You have not included the global variable
  • If you want to run multiple instances of the Subvi in parallel, it must be reentrant.
  • As the Subvi is interactive, it must be configured to display the front panel when it is called, otherwise there is no way to stop it ever.
  • All your time loops needed little expects. They have no need to turn as fast as the CPU allows, all other processes of hunger.
  • "Go to under control" is extremely complex and crawling with weird stuff like an ant farm.
  • • The shift register must be initialized to avoid surprises (but you probably don't have it all)
    • Your loop runs one time too many.
    • Avoid the stress points, such as the structure of the case.
    • You can replace this whole thing with for example a table of threshold, no need to loop. (see image below).

  

  Good luck!