Satellite P300D - Wifi Ubuntu 10.10 disconnect when I use USB
Hello
I have a problem with my Wifi on my laptop. I have the Toshiba Satellite P300D one I installed Ubuntu 10.10. If I use the built-in webcam or any other device usb, my wifi where to cut. Only, when I connect my laptop, the WIFI connection is good. When I restart my computer, is already ok.
I looked upward into the systemlog and I found this:
... kernel: [170297.830069] usb 1-2: high speed new USB device using ehci_hcd and address 4
Someone at - it an idea for this problem? Hi Sophokles, I put t have much experience with Ubuntu, but do you see the same behavior on Windows preinstalled from Toshiba? Otherwise I found this for you: Tags: Toshiba Satellite C660 - WIFI connection lost after disconnecting the AC adapter / CC I have a Toshiba Satellite C660/C660D. I always connect to the Internet via the wireless connection. However, the laptop must be connected to the power supply. As soon as I unplug the connection drops. Any help / advice would be much appeciated. Hey Buddy, Please read this article. Normally it should help you: Satellite M30-113 does not work well when I use FreeBSD 6.2 Hello My M30-113 does not work well when I use FreeBSD 6, 2-RELEASE http://www.FreeBSD.Org/ I was told that Toshiba has release a new bios to correct the problem of cooling, because it does not allow me to fan passive cooling in FreeBSD. So could we have a new bios to solve this issue? Arabian salvation I am sure that mobile industry is focused on Windows operating system and hardware architecture together and preinstalled software are adapted and also configured to run well and stable. This operating system is supported and if something should be better portable manufacturers offer different updates to the BIOS. Of course, you can preinstall what you want but you can not expect support for everything you can find on the market and because of this I n t believe that you won't find any update especially for FreeBSD 6.2 - RELEASE BIOS. Satellite C660 - 1 d 7 - Wireless disconnects when not plugged in I had problems with the wireless on my C660 - 1 d 7 croissants. Every time I take it off the sector, drops wireless and I have to connect to Ethernet, which kind of takes the whole point far from mobile. I've updated the drivers on the system to the most recent (from the toshiba Web site) and yet he falls again. That it becomes embarrassing that I work from home, so VPN loaded, so whenever I lose the net, I have to keep logging into that, that takes away the time. I also use a VOIP phone that will again cut. Wireless LAN is Realtek RTL8118CE Can anyone help as its driving me potty. Hello This has been discussed many times here. Welcome them "You have been disconnected" when you use Windows Live Mail Hello Recently, when I open Windows Live Mail, sometimes Skype will be disconnected me with a message saying "you have been disconnected. What is the cause and how I fixed that? Unfortunately, it is a known problem and no solution is yet available. DeskJet 3520 disconnects when not used for a while The printer goes offline when not in use. WiFi is BT HomeHub3. Manager hub has no reference to the Mac filtering, which is the error message on the wireless network test result. Printer does not keep the wireless connection. http://support.HP.com/us-en/document/c02817031 Step 6 to set the static IP address. You will need to read the manual of your router and learn more about it to check the beginning and end DHCP IP for the router. That's what I get when I type ipconfig at the command prompt. And this all started because my computer wouldn't connect to my wireless network, but will be my other computer. Hello Thanks for posting in the Microsoft Community. I understand that you are facing problems with wireless network in Windows 7. I imagine the inconvenience that you are experiencing. I will definitely help you with this. Please follow the steps in the link. Wireless and wired network problems FMS automatic disconnects when you use a class He thinks that is because you use the local variable: your variable is deleted at the end of the connect() so your NetConnection will close its doors at the same time. Try this: Code Conn.As: private var objNetCon:NetConnection; public void Conn() public void connect() Satellite Pro L850-1DV - screen is blank when inserting the USB Hi guys some help please. I recently bought a laptop from Sat Pro L850-1DV the following specification Core-i5 2.5 Ghz The problem is that whenever I have insert a USB device, the screen is blank. I then need to move the Please is - can anyone help as to why this happens, and please suggest a correction. Thank you Hmmm... never heard of it. It happens when you connect any type of external device via USB port? I just want to know if it is some kind of general problem. Using Win7 preinstalled original or your own version? Satellite Pro U200-128: the missing letters when typing using Vista Hello I started facing a new problem after upgrading my operating system from XP to Vista. The problem is that after writing a text, I realize that it was missing some letters (sometimes seven times during the writing of these statements). There is no problem with the keyboard because when I re - get the letter it works. Thank you Have you noticed the same thing using Windows XP? I noticed something similar on my old laptop. After the BIOS update the question didn't appear. I have a dell laptop and use it with a second larger screen (Radon9000) in my office. I use my computer at home without the second monitor, and when I returned to the office that the multiple monitor feature will not work - this started about two weeks ago and his do worse. Used to be simple to use control panel / monitor / settings / click the icon of the 2nd monitor / enable / ok and he wouldcome right on - but now I can not even be activated using troubleshooting. Do not have the CD original monitor and computer advises I don't need driver for it - ideas all or should I trash the monitor and get a new one? I have a dell laptop and use it with a second larger screen (Radon9000) in my office. I use my computer at home without the second monitor, and when I returned to the office that the multiple monitor feature will not work - this started about two weeks ago and his do worse. Used to be simple to use control panel / monitor / settings / click the icon of the 2nd monitor / enable / ok and he wouldcome right on - but now I can not even be activated using troubleshooting. Do not have the CD original monitor and computer advises I don't need driver for it - ideas all or should I trash the monitor and get a new one? (Small chance) could be the monitor. If you think that it is the monitor - borrow from someone else for a bit, see if it works. I look for a new version of your video card for the laptop driver and get installed it. First of all - Dell - based on the serial number. Go ahead and update your motherboard chipset, network, etc while there. If that isn't helpthen, you should go to the source - the real manufacturer of the video card chipset. Intel likely, may be nVidia or AMD (ATI). Get the latest software/drive here and installed complete. Recently, I upgraded my wife to a new pc with Windows 7 Home Premium on it. The package of trancription she uses is WinScribe. For knowledge, we kept his old Office XP with Word 2002. After the IT person to society that it contracts for all their software set up and install a spell checker medical all seems to work well. Well now, we just have a question. She uses and uses an Infinity IN-USB-2 foot controller. The question is when it plays its reports, intermittently when it leaves upward on the pedal to play that the report continues to play. We have installed a new pedal, always with the same problem. These controllers do not come with a dedicated driver, but are recognized by Windows. Don't know if it's a problem of Windows 7 or not, but before, it was to use Windows XP with the same transcription software, the same product office and same foot controller without problem. As a side note, my reason to replace his old computer was XP got to where she acted as if she had alzhiemers. Has raced in many analyses of virus and malware scans with various products. No permit. Has happened to another pc, I have too. Anyone who deals with this? Hello Larry,. Thanks for posting of query in Microsoft Community. Hey there, I was wondering if someone can help with this. Basically, my works fine external HDD so I boot to windows and then plug it into a USB 3.0, but if I leave it plugged in as I would like and reboot or shutdown and return to the reader don't launch and Windows does not detect it correctly. I am on Windows 7 64 bit, have an i5 - 3570 k and a sabertooth z77 mobo. USB drivers are updated, the intel one controller as the asmedia one, the bios is up-to-date, near as I can tell everything is up-to-date, but this hard just don't have it. It doesn't matter what USB 3.0 port it is plugged into you just cannot get starter. You can feed the cycle only and that will do the trick, but I don't want to do every day. If plug you it into a USB 2.0 port, so that it works exactly as it should here is my solution. Now, I tried to contact Seagate and they suggested that I update my drivers, even if I told them that I had updated my drivers, which was great. Clearly, they have nothing useful to say. Anyone got any ideas? Hello Thank you for the update. This can give it a try and check. Drive not detected - helpful links I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows. When I touch my Satellite P300D support component turns Hello I got my Satellite P300D for awhile now however when I try to clean up when its been turned off and I have spend my sheet over the media group above keyboard turns itself on which is annoying when you're trying to clean it up. Any help gratefully received Kind regards Alan Hello Since when did you notice this problem? On this behavior, I found a similar thread: So I can say this normal behavior of s is on when you press the button mute. With Ubuntu - wellcome very slow when screen Toshiba NB100 no wifi access Hello Wellcome Toshiba ubuntu with every choice menu (games, administration, internet...) work very quickly when WiFi is okay and on and if you are in other cases, it works very, very slowly. Other cases, it means: If you have already loaded programs that that program working normally, it is only the menu toshiba ubuntu that does not work properly. When you share a program to the Ubuntu menu, sometimes, you have a blank screen instead of work well I hope someone can help me Thank you. Post edited by: mmo91 module: This problem occurs when you use the menu of ubuntu GUI written by toshiba, I think, because if you use ALT - F1, everything goes fast. Hello! It is a known issue on Windows systems. If you n t use the WLAN and connect to the local network and you have active DHCP it will takes a lot of time on start up because the operating system tries to get an IP address from the DHCP server. Try to assign a static IP address, and the problem should be solved. Good bye By Siri reminders are not saved When I use Siri on my Apple Watch to set a reminder or add an element to a list of reminders, he isn't being recorded iCloud. I get the answer from Siri stating that the callback has been added, but it never appear on reminded them on my iPhone or i Hello Dear moderator / Expert! After moving from Win 7 to win 8.1 on my HP Elitebook 6930p, the following drivers are missed to update. I'm more worried the graphics driver, the rest of the drivers are not affected one of my machine use. Kindly down How to do a left click with the pen Hi, I just bought this switch Alpha 12, which comes with a stylus tablet. I tried to play with the stylus to understand how a click left with the pen but had no luck. Please help if you can. Thank you in advcance Joe. Vertix and Pixel Shader Model is? "I want to play this game called BULLY: SCHOLARSHIP EDITION for PC and when I downloaded the game software it says I need 32-bit display and vertex and pixel shader model 3.0 support." There was a previous thread on this, but I was wondering if you c How to set up a PPPoE connection? I want to know if anyone knows how to set up a PPPoE with Windows Vista Home Premium. I have Comcast as a provider of services and I am already able to go online with the wireless router, but I put it in place as a dynamic connection instead of a PP
... kernel: [170298.151122] uvcvideo: found device UVC, 1.00
... kernel: [170298.189692] input: camera UVC (046d: 0805) as /devices/pci0000:00/0000:00:13.5/usb1/1-2/1-2:1.0/input/input9
... kernel: [170299.144711] usbcore: registered new interface driver snd-usb-audio
... rtkit-demon [1592]: thread 18046 3662 (n/a) belonging to '1000' process RT managed to priority 5.
... rtkit-demon [1592]: oversee 5-wire 1 process of users 1.
... kernel: [170300.341620] 0000:00:13.5 ehci_hcd: forcing the halt; handshake 00004000 00000000->-110 ffffc9000067e424
... kernel: [170300.341635] unable to submit datapipe Urb 1, error-108: disabled device
... kernel: [170303.022594] rtl8187: wireless switch off radio
... NetworkManager [1009]:
http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=14Similar Questions
[Wireless LAN connection disconnects when the AC adapter is removed. | http://APS2.Toshiba-tro.de/KB0/TSB12033H0001R01.htm]
Visit the Wirelles forum.
The solution;
-updated the BIOS to the latest state
-update the WLan driver
-Disable WLAN energy saving in Win 7 power management.
The FLA code:
Import _includes.*;
var obj_conn:Conn = new Conn();
obj_conn. Connect();
Code Conn.As:
_includes class. Conn
{
public void Conn()
{
}
public void connect()
{
var nc:NetConnection = new NetConnection();
NC. Connect ("rtmp://localhost/classtest");
}
}
Please note that the connection works fine if I just create a NetConnection instance on the FLA itself variable in the timeline. Any suggestions/help would be appreciated!
_includes class. Conn
{
{
}
{
this.objNetCon = new NetConnection();
this.objNetCon.connect ("rtmp://localhost/classtest");
}
}
8 GB RAM
Win7 64 bit with SP1
video driver = 8.15.10.2752
DirectX version 11.0
mouse or tap a key to bring the screen... it's really boring.
Also it occure with all the letters! Y at - it suggestions to solve this problem?
Please check this!
No one knows how to stop it turning I would decide when to turn it on lol
Have you installed the latest version of the BIOS?
http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=231754
I am a new user of ubuntu on nb100 and I have a problem when there is no wifi connection:
-ubuntu stop you lan connections,
- or are you somewhere without wifi connections
MichelMaybe you are looking for