table, equivalent string.replace
Hello
What can I use as a method to replace on a table?
Replace the method of the done String class a number of things. First, it locates a match of what is supposed to be replaced and secondly it replaced by something else. For a table, you will need to take into account these two steps. The first step could be carried out using the indexOf() method. The appearance of replacement could be as simple as the reallocation of the element which is found at index... table [i] = something again.
So if you wanted to combine them into a single line of code, that would be something to the effect of...
Array [Array.IndexOf (Old)] = new;
Example:
var array: Array = new Array (2,3,4,5).
Array [Array.IndexOf (4)] = 8;
trace (Array); traces 2,3,8,5
Tags: Adobe Animate
Similar Questions
-
String replacement in preferences
Hello
Is someone can you please tell me what is the Substitution string in run/debug in the Preferences menu? After that I added a string substitution entry, how the call? Examples of how to use it?
I hope it's something like shortcut keys which maps something like "pubf" to "public service." But it looks like that isn't it. I also tried to make mapping as that in adjusting keys in the preferences too, but could not get that to work either...
Thanks for any help,
JohnSubstitution string in run/debug in preferences will not do what you want. String replacement in this page is preferably used to allow $(myVar) must be replaced with a different value in some other pages in the dialog box. It is documented here (but again, this is not what you want):
Regarding the hotkeys like "pubf" to "public service" mapping, I don't know how to do this. One thing that does not work, however, is that Alt + / can be used as a versatile word completion. What it does is that it finds the current file for words that match what you have typed. So, for example, if the current file already contains the word "public" somewhere else, then "pub" followed by Alt + / will complete the word "public."
But of course, if the file does not already contain the word "public" then that will not work. ALT + / is really more useful for cases like this - I've added a Manager click, click = "myNewClickHandler ()", and then I want to implement this feature, so I type "
public void myNew
And then I type Alt + / and it fills in the name of the function.
-
Input series table 2D Element replacement and re - initialize the problem
I have a project with data from a microcontroller PIC18f is the streaming of data via USB. Incoming data in LabVIEW are delineated in a way and replaces a line in a table of data of 9 x 6.
The issue I'm having is that every line I want to update, updates correctly, but all other lines re - initialize to zero where I like to keep all previous data in the other lines in addition to the line newly updated. The reason why I update to each line, it is that the serial data from my microcontroller have a max buffer size it broadcasts in LabVIEW with certain delimiters that will recognize for each row/column and update the data in the corresponding cell of the program in LabVIEW (but he does by deleting also all other entries which is not what I want!).
I use the registers at offset and the problem still persists. Attached is my code and to emulate my series string driveway, I copied and pasted my data series are lower. So all he must do is to change between the different channels in the "chain Indicator (display Hex) of entry that the program is running.
Any help would be greatly appreciated! Thank you
Candice
Chain 1:
:1'1,11B0:1'1,2FFA0:1'1,33DD0:1'1,40:1'2,11A0:1'2,2B0:1'2,340A0:1'2,4380:1'3,1FFFF:1'3,2FFFF:1'3,3FFFF:1'3,4FFFF:1'4,1FFFF:1'4,2FFFF:1'4,3FFFF:1'4,4FFFF:1'5,1FFFF:1'5,2FFFF:1'5,3FFFF:1'5,4FFFF:1'6,1FFFF:1'6,2FFFF:1'6,3FFFF:1'6,4FFFF
Channel 2:
:2'1,1330:2'1,2FFF0:2'1,33DF0:2'1,4700:2'2,1FFFF:2'2,2FFFF:2'2,3FFFF:2'2,4FFFF:2'3,1FFFF:2'3,2FFFF:2'3,3FFFF:2'3,4FFFF:2'4,1FFFF:2'4,2FFFF:2'4,3FFFF:2'4,4FFFF:2'5,1FFFF:2'5,2FFFF:2'5,3FFFF:2'5,4FFFF:2'6,1FFFF:2'6,2FFFF:2'6,3FFFF:2'6,4FFFF
Channel 3:
:3'1,1FFFF:3'1,2FFFF:3'1,3FFFF:3'1,4FFFF:3'2,1FFFF:3'2,2FFFF:3'2,3FFFF:3'2,4FFFF:3'3,1FFFF:3'3,2FFFF:3'3,3FFFF:3'3,4FFFF:3'4,1FFFF:3'4,2FFFF:3'4,3FFFF:3'4,4FFFF:3'5,1FFFF:3'5,2FFFF:3'5,3FFFF:3'5,4FFFF:3'6,1FFFF:3'6,2FFFF:3'6,3FFFF:3'6,4FFFF
Rope 4:
:4'1,1FFFF:4'1,2FFFF:4'1,3FFFF:4'1,4FFFF:4'2,1FFFF:4'2,2FFFF:4'2,3FFFF:4'2,4FFFF:4'3,1FFFF:4'3,2FFFF:4'3,3FFFF:4'3,4FFFF:4'4,1FFFF:4'4,2FFFF:4'4,3FFFF:4'4,4FFFF:4'5,1FFFF:4'5,2FFFF:4'5,3FFFF:4'5,4FFFF:4'6,1FFFF:4'6,2FFFF:4'6,3FFFF:4'6,4FFFF
Channel 5:
:5'1,1FFFF:5'1,2FFFF:5'1,3FFFF:5'1,4FFFF:5'2,1FFFF:5'2,2FFFF:5'2,3FFFF:5'2,4FFFF:5'3,1FFFF:5'3,2FFFF:5'3,3FFFF:5'3,4FFFF:5'4,1FFFF:5'4,2FFFF:5'4,3FFFF:5'4,4FFFF:5'5,1FFFF:5'5,2FFFF:5'5,3FFFF:5'5,4FFFF:5'6,1FFFF:5'6,2FFFF:5'6,3FFFF:5'6,4FFFF
Channel 6:
:6'1,1FFFF:6'1,2FFFF:6'1,3FFFF:6'1,4FFFF:6'2,1FFFF:6'2,2FFFF:6'2,3FFFF:6'2,4FFFF:6'3,1FFFF:6'3,2FFFF:6'3,3FFFF:6'3,4FFFF:6'4,1FFFF:6'4,2FFFF:6'4,3FFFF:6'4,4FFFF:6'5,1FFFF:6'5,2FFFF:6'5,3FFFF:6'5,4FFFF:6'6,1FFFF:6'6,2FFFF:6'6,3FFFF:6'6,4FFFF
Line 7:
:7'1,1FFFF:7'1,2FFFF:7'1,3FFFF:7'1,4FFFF:7'2,1FFFF:7'2,2FFFF:7'2,3FFFF:7'2,4FFFF:7'3,1FFFF:7'3,2FFFF:7'3,3FFFF:7'3,4FFFF:7'4,1FFFF:7'4,2FFFF:7'4,3FFFF:7'4,4FFFF:7'5,1FFFF:7'5,2FFFF:7'5,3FFFF:7'5,4FFFF:7'6,1FFFF:7'6,2FFFF:7'6,3FFFF:7'6,4FFFF
Channel 8:
:8'1,1FFFF:8'1,2FFFF:8'1,3FFFF:8'1,4FFFF:8'2,1FFFF:8'2,2FFFF:8'2,3FFFF:8'2,4FFFF:8'3,1FFFF:8'3,2FFFF:8'3,3FFFF:8'3,4FFFF:8'4,1FFFF:8'4,2FFFF:8'4,3FFFF:8'4,4FFFF:8'5,1FFFF:8'5,2FFFF:8'5,3FFFF:8'5,4FFFF:8'6,1FFFF:8'6,2FFFF:8'6,3FFFF:8'6,4FFFF
Channel 9:
:9'1,1FFFF:9'1,2FFFF:9'1,3FFFF:9'1,4FFFF:9'2,1FFFF:9'2,2FFFF:9'2,3FFFF:9'2,4FFFF:9'3,1FFFF:9'3,2FFFF:9'3,3FFFF:9'3,4FFFF:9'4,1FFFF:9'4,2FFFF:9'4,3FFFF:9'4,4FFFF:9'5,1FFFF:9'5,2FFFF:9'5,3FFFF:9'5,4FFFF:9'6,1FFFF:9'6,2FFFF:9'6,3FFFF:9'6,4FFFF
Hi Candice,.
Try the attached VI. I think that the while loop loops for each row (?) If so, you need a set longer shift registers at the border of the while loop.
I hope that helps!
-
County to consecutive character in string &; replace with a single
Hello
I want to count the (same) characater successive chain i.e.
Suppose that the string is the first week = < shild week == third week =.
so the '=' character comes from 2, 4, 6 consecutive times want to become now a string like
first week = < shild week = third week =.
i.e. = comes only onceHello
Satyam_898448 wrote:
HelloI want to count the (same) characater successive chain i.e.
Suppose that the string is the first week =.
so the '=' character comes from 2, 4, 6 consecutive times want to become now a string likefirst week =
i.e. = comes only onceWhy don't you want to
first wek=
? Are not 'cc' and 'ee' as examples of the same nature, repeated in succession?
Assuming that you do not want to replace a given character ('=' in this example):REGEXP_REPLACE ( 'first week====
I hope that answers your question.
If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and the results you want from this data.
Explain, using specific examples, how you get these results from these data.
Always tell what version of Oracle you are using. -
Indexing of a table with string instead of the number
In TestStand, there are 2 ways of indexing of certain types of berries. (Seems to be arrays of containers)
For example, in a sequence containing one step, called statement, you can contact this step in two ways:
RunState.Sequence.Main [0]
and
RunState.Sequence.Main ["Statement"]
(in fact, I can also use the id of the step, but keep, more simple with these 2 methods)
Is there a way to create this type of table myself, in order for me to use string indexing? (or is it only possible on certain Types of OR)
As can imagine you, this works for any array of containers.
You just need to assign names to the elements. You can do this in the sequence by selecting an item and pressing F2, editor or by setting the PropertyObject.Name programmatically.
-
Table 2D-strings in the "get/set item property.
I am porting the code of veristand 2009-2010 and I noticed that the get/set vi item property does not the same. Specifically, I can't write or read 2D strings sent as variants. When I put the 2D table in a cluster, it works fine. Does anyone have information on this?
JY
Hi JY,.
This problem was reported to R & D OR as a Corrective Action Request (CAR) 287960 for further investigation. Thanks for the comments!
-
Table 3D: cannot replace the 2D subset?
Hey guys,.
I discovered a rather strange event (if any). In debugging my code, I stumbled upon my function replace table subset to find that it was the source of my frustration. Either I don't understand how it works for 3D arrays (I use it a lot for 2D, 1 d) or there is a bug. I have attached a picture of the code examples here. I can't replace a 2D picture into my table 3D. I would like to take a page from the 3D and replace it with a page of update / different. The example image is sure to strongly the oddity.
Any thoughts?
Regardless of the size of the input array, the result of the table replace never increase the number of items. You try to grasp the first page, add a line, then replace the first page. The result is that the replacement is cropped to the initial first page size, if you have a developed NOP (no operation). Move the entries in your table to build on it and see what happens.
You can't replace an item that does not exist in the input array.
-
Calculation for table element, then replace in same table
I have a 2D, c [j, i] table, and I want to perform calculations on each element of this array, c [j, I] = c [j, I] + d * one update [i], so that the same table with the new values. I installed the structure using a loop and got back each new c [j, I] that I'm supposed to do, but I can't seem to get these new values into the table. I tried to use the node 'Replace table subset' but I can't seem to connect the output to the same HP. array [j, I] table.
Any help is greatly appreciated!
Hi cmersit,
Why do you need that for? You have not said before...
Well, create a local to c [j, I], move it to the for loop and connect with the release of ReplaceArraySubset. It's going to hurt needs memory and processing speed and doesn't help here. Replace [result] with a local of c [j, I] for this example. Otherwise use a shift register in the outer loop!
-
How to read the table of string returned by the DLL
I developed DLLS in labview that takes 2 input parameters as a string and returns an array of strings in return. How can I read back this array returned strings in labview? I tried to return a string and I can't able to read. But how to read a table?
Is the signature of the function – void GetLoginInfo (char [] DBPath, char [UserName], LStrHandleArray * table)
Shrinivas
I found the solution. When you configure the node to call a library function, the argument (in which we expect an array of string) type should be chosen as "Adapt to the Type" and data format to be "pointers to the sleeves.
-
Table 2D-string in a void 2D array
I'm trying to wire connector of my sub - vi component as one of its inputs is a 2D string table, which I will then use the Subvi. What I did was place a table Sub 2D on the Panel before as a control and linked to the connector pane. When I try to thread 2D array of string for this entry on my Subvi, it gives an error since the source is a table 2D-chain and the sink is an "empty" 2D array
How to simply create an array of string entry of my Subvi 2D, so that I can no matter what table 2D-chain of wire and accepted by the Subvi?
Drop a contriol string in the table container.
-
Table index String function?
Using the Index of an array of strings, said "the connector pane displays the types of data by default this function is polymorphic." but it doesn't seem to be polymorphic. I can only call a table 1 d of channels in the table of chains and a string to a string. Miss me something really obvious or aid is wrong.
I'm not exactally new to LabVIEW, but I didn't realize that now (thanks to quick drop) that this feature exists.
Other the ability to concatenate the input string with the indexed array element string why Index of array of strings does exist? Is there any other reason to use instead of the array index generic function?
With the help of LabVIEW 2010.
Steve:
I went ahead and filed a CAR (#279806) documentation to get this corrected. Thanks for putting in place!
-
How to create a table with strings active by Boolean button
Hello.
I have a problem to create a table and did not find any topic in the forum that could help me solve this problem.
I need to create a table of alarm.
In other words, every time an alarm has been triggered (Boolean button), the table shows the time, date and where the alarm has occurred.
For example, when garage alarm is activated, it will be at table:Date / / Time / / Garage / / presence ON
And so on, when the alarm is activated the room:
Date / / Time / / room / / presence ON
If anyone can help, I would appreciate it enough.
Thank you.
Giuliano06 wrote:
So I can show the alarm, but when the button is not selected, it sends the null value (empty string) for the table through the registry to offset.
Also, when I choose for example the 2 bedrooms, it is moved to another column in the table and not just below the last alarm obtained.
My VI is attached cases someone might have an idea.
your constantly questioning the value to your table, ofcoarse, this vi is designed according to the mechanical action of the Boolean switch...
-
I'm taking a picture of waveforms and the units of the scale accordingly. I have a picture of the sensitivities that the user can change and do this in my "EUs Scaling" under VI. I would use just of "LAS scale voltage to EU VI LabView", but the sensitivity of my sensors will vary depending on the way through. I can't much the back wave of construction. I think I'm scaling of values of y in my sub VI correctly. The sub VI is inside a loop of acquisition data and after reading MX DAQ. The sub VI is "Scaling had 32ch".
In addition, when you use DAQ MX create channel he wants to channel names to a string of nouns that are delimited by commas. How do I take a string array and comma delimit them into one string?
They are here in 2009.
-
How can I do this (in the synoptic table of string constant)?
How do I this? Can u write the sequence?
-
Detection of dimension table and find/replace
Sorry if it's simple, but I can't find an answer and what I have tried does not work.
I need to 'reverse' and table. I mean if an element in an array is zero, make it 255, and if it is 255, zero.
This bit is easy enough, but the table can be 1 d or 2D. I can't find a way to detect the dimension. Size of the array gives a number if table is 1 d and a table so she 2D (or), but I can't work on how to use this (size of the table making table size gives an error if the input array is 1 d)
Thanks for any help. (Race of 8.6 if it makes a difference)
Richard,
If you get properly, the only problem is that you cannot predict the dimension of the array you want to process. How this table is created in the first place? Maybe there is a way to keep track of the right side of the dimension of creation. IM only guessing of course, maybe it's time that you show us a piece of code.
Best regards, Florian
Maybe you are looking for
-
Toolbox uninterrupted presence of loading screws
Hi all Is there a way to test the presence of a Toolbox (such as the database connection kit) when LabVIEW is the project loading or from the exe and activate or unactivate the code using this toolkit? Basically, I am developing a project that can se
-
It is said ERROR 2: THE SYSTEM CANNOT FIND THE SPECIFIED FILE When you try to manually start the Service. ! System log gives: 7035 (service has been successfully sent a start control.) 7036 (service entered the stopped state.) 7023 (the Windows Firew
-
HP Compaq Pro 4300 All in One – Wireless NIC will not install
Hey everybody. I got a doozy and I can't understand it. I have a HP Compaq Pro 4300 AIO I have Win 7 Enterprise 32-bit All the drivers seem to be installed correctly, however when it comes to woreless NIC, it won't load. I tried all the drivers avail
-
Problem of permissin applicant UAC
I have windows vista im having a problem.i UAC try to install an update to NORTON 360 that I run the setup my UAC asking permission for the program continue I press the OK button, but nothing happens on the screen of the UAC request my permission aga
-
When I click on 'Run 64-bit DxDiag' the DxDiag tool closes.
Original title: DxDiag 64 bit problem How can I run 64-bit dxdiag? I tried opening dxdiag & clicking on the 'Run 64-bit DxDiag' button on the bottom, but it doesn't close the window. What I am doing wrong?