Table for the archiving of payroll process

Similar Questions

• 15 seconds for the archiving of newspapers is acceptable?

  Version: 11.2.0.3
  Platform: RHEL 5.4
  
  3-node RAC
  DB in ARCHIVELOG mode
  
  Question1
  ============
  
  As you can see below sometimes it takes up to 15 seconds for the archiving of recovery logs.
  
  Online redo log switch happens fast however. It takes less than 2 seconds (maybe not fast enough for you guys)
  
  Is this acceptable?
  
  
  

  --- Log archiving is slow
  
  SQL> set timing on
  SQL> alter system archive log current;
  
  System altered.
  
  Elapsed: 00:00:11.08
  SQL>
  SQL>
  SQL> alter system archive log current;
  
  System altered.
  
  Elapsed: 00:00:10.77
  SQL> alter system archive log current;
  
  System altered.
  
  Elapsed: 00:00:15.06
  SQL>
  SQL>
  
  -- But log switching is fast !
  
  SQL> alter system switch logfile;
  
  System altered.
  
  Elapsed: 00:00:01.89
  SQL> alter system switch logfile;
  
  System altered.
  
  Elapsed: 00:00:00.21

  Question2.
  =========
  
  For a database in archivelog mode, ALTER SYSTEM ARCHIVE LOG CURRENT and ALTER SYSTEM SWITCH LOGFILE have the same effect. Right? I mean, these two commands request the process archiving to archive the ENT which is currently written to. right?

  It's fast enough, as long as you don't fill all redo it online until you have completed check-in first. This is a round robin, so if you get all the way around to the first which is still more archived, everything stops until it is done.

  The ALTER SYSTEM ARCHIVE LOG CURRENT expected archiver finish archiving, is slower than ALTER SYSTEM SWITCH LOGFILE, perhaps very much so with the largest and redo.

• By comparing the two tables for the integrity of the data

  Hi all
  I need to compare two tables for the integrity of the data through the SQL query.

  If you need to compare all the columns of t1 to t2:

  (SELECT * FROM t1
  MINUS
  SELECT * FROM t2)
  UNION ALL
  (SELECT * FROM t2
  MINUS
  SELECT * FROM t1);
  

  Kind regards
  Ankit Rouault
  http://theoraclelog.blogspot.in

• Base table for the customer in R12

  Hello
  
  What is the name of the base table for the customer in R12?
  
  Thank you
  GSM

  Please see (absorption of the projects of the TCA Architecture in version 12 [417511.1 ID]).

  Thank you
  Hussein

• Dictionary of Table for the ip address of the database

  What is the Oracle data dictionary Table for the ip address of the database

  Hello

  I think that could give him the IP address

  SQL > select SYS_CONTEXT ('USERENV', 'IPAddress', 15) double ipaddr;

  concerning

  Jafar

• There is 'table' for the object_type values?

  I wonder if there is a system view, or a table for all the values that can appear in the all_objects.object_type column? Or maybe the only way to get this list of os values to query with the distinct keyword dba_objects.object_type?

  Thank you

  Look at the source of the view:

  Decode (o.type #, 0, 'NEXT ITEM', 1, 'INDEX', 2, 'TABLE', 3, 'CLUSTERS',)

  4, 'VIEW', 5, 'SYNONYM', 6, 'ORDER ',.

  7, 'PROCEDURE', 'FUNCTION', 8, 9, 'PACKAGE ',.

  11, 'PACKAGE BODY', 12, 'TRIGGER ',.

  13, 'TYPE', 14, 'TYPE BODY ':

  19, "PARTITION TABLE", 20, 'PARTITION OF THE INDEX', 21, 'CRAFT. "

  22, 'LIBRARY', 23, "DIRECTORY," 24, "QUEUE."

  28, 'JAVA SOURCE,' 29, 'JAVA CLASS', 30, 'JAVA RESOURCE. "

  32, "INDEXTYPE", 33, "OPERATOR",.

  34, 'TABLE SUBPARTITION', 35, "INDEX SUBPARTITION.

  40, 'LOB PARTITION', 41, "LOB SUBPARTITION.

  42, NVL ((SELECT "EQUIVALENCE OF REWRITING"

  AMOUNT $ s

  WHERE s.obj #= o.obj #.

  and bitand (s.xpflags, 8388608) = 8388608).

  "MATERIALIZED VIEW'),

  43, "DIMENSION."

  44, 'CONTEXT', 46, "SET OF RULES', 47, 'PLAN OF RESOURCES."

  48, GROUP "CONSUMER."

  55, "XML SCHEMA", 56, "JAVA DATA."

  57, 'EDITION', 59, "RULE."

  60, "CAPTURE," 61, "APPLICABLE."

  62, 'EVALUATION CONTEXT ',.

  66, 'JOB', 'PROGRAMME', 67, 68, "JOB CLASS", 69, 'WINDOW',

  72, GROUP 'PLANNER', 74, 'CALENDAR', 79 'CHAIN ',.

  81, 'GROUP OF FILES', 82 'MODEL OF EXPLORATION' 87, "ASSEMBLY,"

  90, 'IDENTIFICATION', ' 92, 'CUBE DIMENSION', 93, "CUBE."

  94, "MEASUREMENT RECORD", 95 "CUBE BUILD PROCESS,"

  100, "LINE WATCHER", 101, "DESTINATION."

  "UNDEFINED"),

• Help with a table for the many buttons of MC

  Hello. I am a very new flash user and working on a flash project that has 50 movie clip buttons.
  
  Each button will be different so I plan to 50 buttons in the library. Each button will have 4 States - upward, downstairs, Upover, & Downover. There are 4 keyframes button, 1 for each State, with a stop() on each keyframe.
  
  Action script I have to press '1' is attached at the end.
  
  Ok. Here's where I'm stuck. What I want to do is to use an array to store the value true or false for each of my buttons so I hope I did not copy and paste this code 50 times and change the name of the button. It seems that I should be able to use the 1 section of the code to change the State of some I press the button. I just don't understand the tables and how a MC to refer to a table.
  
  Everyone mind help me a little?

  Let's back up a step or two. This actionscript as I wrote it is expected
  to be placed in a space of script of frame on the same scenario as the buttons
  themselves. Each button instance must have an instance name, "btn1",.
  ETX. I guess you did. These button instances must be in
  the same framework that the ActionScript. In other words, if the buttons exist
  in frame 1, then the ACE should also be Framework 1.

  1. the button instance names table must have a relative to path
  each of the buttons. The names cannot have quotes around them. The
  reference is the name and path of the instance. So, if the buttons are
  an another movieClip then you should include the name of the element with the
  each button name: example (buttonClip.btn1, buttonClip.btn2, etc.). This
  It is essential for the second part to work properly.

  The loop will use the references button in the table and assign the
  enabled property and its value for each button, then it will assign each
  the functions of each button. This is what you were after,
  a function that will work for each event for each of the
  buttons.

  Given the reference to instances of button is false, all the rest
  will fail.

  Take a look at this example,
  http://www.DDG-designs.com/downloads/arraySample.zip, this should help
  to explain the process. In this example, the buttons are in a movieClip.

• For the Archives: The upgrade of the Satellite L30-134

  I'm one of those old cell phones off a friend who had retired as being obsolete.

  However with a little time and money, it is possible to upgrade to a very usable machine.

  Not a power by any stretch but perfectly adequate for browsing the internet and watching videos (about 720 p watchable) standard definition etc.

  So as the search of these forums for more information for this project, I found a lot of conflicting advice, and some of my questions were not answered at all. I hope by documenting my experiences here I can help someone in the same position in the future.

  * Model *.

  This machine is the Toshiba Satellite L30-134, part number: PSL33E-00E013G3. It's probably very similar, but not necessarily the same as the other models L30. No invert them.

  * Original configuration *.

  Processor - Intel Celeron m 410 (Cache of 1 MB, 1.46 GHz, 533 MHz FSB, Socket M). It is a simple version of the Core Duo (Yonah core) processor core. It shares nothing in common and is not swapable with the previous generation Pentium M or processors Celeron Mr. He is also incompatible with the next generation of Core 2 Duo/Solo and Pentium and Celeron processors derived from these.

  Memory - A single 512MB SODIMM PC2 - 4200 (DDR2-533 MHz). This differs from the previous generation of DDR and the next generation of DDR3. The controller memory only supports single channel mode. There is no loss that the FSB of the processor is not fast enough to take advantage of the dual channel anyway.

  * BIOS *.

  My laptop came with very old version 1.3. Toshiba provides the latest version (3.10) for download. This is reported to be buggy and mess with the profiles of fan so I decided to leave it alone. I can confirm that my updates work without updating the BIOS.

  * Updates *.

  Processor - I swapped the Celeron for a Core Duo T2350 (1.87 GHz). Everything I read that all the Yonah core Core Duo/solo, Pentium and Celeron with a FSB of 533 are compatible. The FSB 667 models are not.

  The Core Duo T2450 at 2 GHz is the highest performing compatible processor but double the price on eBay. I paid just £12 (used) for the T2350 so there is really no reason to go down now, all of these parts are obsolete.

  RAM - there are 2 slots on this machine. Toshiba State a maximum of 2 GB, 1 GB in each slot. Unfortunately, the memory controller is very picky and survey of the weird errors, unless you get just the right ones.

  There is not enough information to understand it so for me it was a process of trial and error. Fortunately, I found an online retailer that guaranteed compatibility in 100% and returned by mail for free.

  The second pair of Poles worked well.

  Thanks for sharing!

• App for the time and payroll sheet calculations

  My daughter in hospitality makes work so much split and travel on a Saturday and Sunday. I am looking for an application that we can punch in his hours for the week and be able to do the calculation of salary based on the appropriate hourly rate so that we can keep control of when it is paid as it's done correctly. Essentially, I'm lookin for an app connects timesheet information to the payroll data. Such an application exists and if so can anyone recommend one? Happy to pay for an if need be.

  Hello alissah6,

  Numbers from Apple is what I would recommend as far as doing calculations with a simple formula. You can learn more about this here.

  The application costs $14.99, however it is packed and has more than 30 models - not to mention, you can also create your own if necessary.

  I would check it out certainly if I'm looking for a few terms related to pay calculation in the App Store.

  Thank you

  James.

• Help with the cluster in table for the cluster size difference, please!

  I will admit to still hurt with the berries of LabVIEW, and as usual, the behavior in the vi attached is meaningless to me!  The attached vi shows a cluster 6 element being converted into a table, then immediately to a cluster.  The reconstructed cluster has 9 elements, even if the table size indicator display properly 6.  How to maintain the initial cluster size when converting to and then since then, a table?

  The f

  Well, if you have worked with context-sensitive help running you would see:

  "With the right button of the function and select the Size of Cluster in the context menu to set the number of items in the cluster."

  The default is new. The maximum cluster size for this function is 256. »

  You must set the size. There is no way for the function to know how many elements in the table.

• Try adding conditions to clause "and" stored in the table for the where clause, unknown syntax

  I am trying to add additional segments to the 'where' clause, and I don't know exactly how to proceed. I am currently using another table to search for keywords and sometimes there aren't everything. I use this table containing the key words to search the description and associate a symbol with a path.

  The code loops through the keywords with the keywords most associated and try to find links to a symbol then excludes those and search for symbols that correspond to those with less keywords and all. I am able to do this with 6 queries and manually changing the arguments, but I want to loop together so that if the changes need to be made in the future, I won't need to go digging in the code.

  Thanks, but that's ok. I already have a solution for this.

• Best location for the archived redo logs

  Hello

  I am OOF instructions and I want to make life for the DBA, that looks like my job easier.

  So, as the title says what is the location of the "standard/Best Practice' for archived redo logs? particularly the dest_1 which is usually local on the same server

  Thank you.

  Hello

  For you, I recommend the use of the Flash/fast recovery area.

  Configuration of the archived of Redo Log locations

  Oracle recommends that you use fast area recovery to an archive location, because the archived logs are managed automatically by the database. The file names generated for the newspapers archived in the fast recovery area correspond to Oracle managed files and are not determined by the parameter LOG_ARCHIVE_FORMAT . Whatever archiving scheme you choose, it is always advisable to create multiple copies of archived redo logs.

  Ref 1:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmconfb.htm#CHDEHHDH

  Ref 2:

  http://docs.Oracle.com/CD/E11882_01/server.112/e17157/unplanned.htm#BABEEEFH

  REF 3:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmconfb.htm#BRADV89418

  Kind regards

  Juan M

• Table for the code for method of payment for the suppliers site

  Hi all, does anyone knows how to get the value for the code for method of payment for the suppliers site in R12.1.3? I don't speak from that in the following path: 1 Paybles responsibility 2. Suppliers 3. Request for a 4 suppliers. Click on details of payment 5. Scroll to supplier Sites and press the update button 6. Note that, for example among the payment methods is checked as default thanks in advance, A.Stoynaov

  Hello

  Please check this note that contains the query:

  Default values for method of payment for providers at the level of the Table (Doc ID 737128.1)

  You can use this query to view the lines for a given provider site:

  SELECT *.

  Of iby_ext_party_pmt_mthds IEPPM

  WHERE IEPPM.ext_pmt_party_id IN

  (SELECT IEP.ext_payee_id

  Of iby_external_payees_all IEP

  WHERE IEP.supplier_site_id IN

  (SELECT APSS.vendor_site_id

  Of ap_supplier_sites_all of the PSA, ap_suppliers APS

  WHERE APS.vendor_id = APSS.vendor_id

  AND APS.vendor_name = '. '

  AND APSS.vendor_site_code = ''));

  Concerning

  Joel Purswani

  Support of Oracle

• Create a table for the web app components

  Hi all, I want to create one to display a list of web app components with the headings at the top of the table and the list of results, then under. See the result here Focus apartments, Brisbane

  I have 2 paintings put up here on the page, with the titles and the other containing the results. So there is no surprise for it being 2 completely separate tables that they don't line up correctly with each other during the display of the results.

  If I insert lines in the webapp layout, he repeats to each item in the list, which we don't want.

  How can I get these headers and data to align properly? No doubt there is a better way than this attempt. Thank you

  Create the table with thead and tbody element on the page. In the tbody add your module tag web app. In the available list web app only include the row in the table (not an entire table).

• Error when calling sous-modèle with the table for the invoice

  I have an invoice template setup and I need to call different tables based on which company they are run for. Calling the separate from the headers and footers of model sub works fine but when I try to use the approach of template void for the body of the invoice I get an error of caused by: oracle.xdo.parser.v2.XMLParseException: element 'when' not found in ' xsl: choose '.
  
  During the validation of the model sub I get error of * [031111_102337143] [] [ERROR] [line 427.180] illegal closure context XSL table: xsl: choose *.
  
  I think I have to use a different model for the body because a given business xml is one completely different structure than the others, but also the structure of the table.
  
  
  Any help would be greatly appreciated as this is the critical moment
  
  Thank you

  I sent you the modified model. Take a peek inside.

  Thank you
  BIPuser