Dictionary of Table for the ip address of the database

Similar Questions

• By comparing the two tables for the integrity of the data

  Hi all
  I need to compare two tables for the integrity of the data through the SQL query.

  If you need to compare all the columns of t1 to t2:

  (SELECT * FROM t1
  MINUS
  SELECT * FROM t2)
  UNION ALL
  (SELECT * FROM t2
  MINUS
  SELECT * FROM t1);
  

  Kind regards
  Ankit Rouault
  http://theoraclelog.blogspot.in

• Base table for the customer in R12

  Hello
  
  What is the name of the base table for the customer in R12?
  
  Thank you
  GSM

  Please see (absorption of the projects of the TCA Architecture in version 12 [417511.1 ID]).

  Thank you
  Hussein

• ORA-16783: could not resolve the deficit for the database

  I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.
  
  ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.
  
  Output of data protection
  
  DGMGRL > show detailed configuration
  
  Configuration - DRSolution
  
  Protection mode: MaxAvailability
  Databases:
  emadb - primary database
  Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
  
  emadbdg - (*) Physical standby database
  WARNING: ORA-16817: configuration not synchronized rapid failover
  
  (*) Fast failover target
  
  Properties:
  FastStartFailoverThreshold = "30"
  OperationTimeout = "30"
  FastStartFailoverLagLimit = "30"
  CommunicationTimeout = "180"
  FastStartFailoverAutoReinstate = 'TRUE '.
  FastStartFailoverPmyShutdown = "FALSE".
  BystandersFollowRoleChange = "ALL".
  
  Fast-Start Failover: ENABLED
  
  Threshold: 30 seconds
  Target: emadbdg
  Observer: emarn1
  Offset limit: 30 seconds (do not use)
  Primary closure: FALSE
  Auto-Rétablir: TRUE
  
  The configuration status:
  ERROR
  
  
  DGMGRL > see the detailed database emadb
  
  Database - emadb
  
  Role: PRIMARY
  State of destination: TRANSPORT-WE
  Occurrence (s):
  emadb
  
  Database error (s):
  ORA-16783: could not resolve the deficit for the database emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadb.
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "optional."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadbdg, emadb '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
  FastStartFailoverTarget = "emadbdg".
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadb.
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  ERROR
  
  DGMGRL > see the detailed database emadbdg
  
  Database - emadbdg
  
  Role: STANDBY PHYSICS
  State of destination: apply
  Transport delay: (unknown)
  Apply the Lag: (unknown)
  Real-time query: OFF
  Occurrence (s):
  emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadbdg".
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "OPTIONAL."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadb, emadbdg '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
  FastStartFailoverTarget = "emadb.
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadbdg".
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  WARNING
  
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL > output

  Alex Antony Samantha wrote:

  
  Head node

  SQL> archive log list
  Database log mode            Archive Mode
  Automatic archival            Enabled
  Archive destination            /opt/app/oracle/oradata/emadb/archivelog1
  Oldest online log sequence     65
  Next log sequence to archive   67
  Current log sequence            67
  
  SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
  
  THREAD# MAX(SEQUENCE#)
  ---------- --------------
        1           925
  

  It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
  When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?

  And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
  Perform the two methods.

  (1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
  (2) conduct 3-4 log switches
  (3) SQL > alter system set log_archive_dest_state_2 = 'enable '.

  and displays the alert log database and backup files.
  And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.

  second method
  (1) copy archives missing from primary sequence of 29
  (2) place manually and then perform a recovery
  or
  (3) retrieve manually

  And update with your conclusions after all these lists.
  Thank you.

• Generate the DDL to create the table in the database

  Hi all

  I want to create the new fact and Stadium as being under the statement:

  (1) in the designer, access the models > Oracle BI Applications (folder) > (model) Oracle BI Applications > done (sub-model) step, right click on the WC_SAMPLE_FS data store and select duplicate the selection.

  2) double-click the new data store, and then rename it. Name and resource name must match the name of the actual table. Alias can be the same or greater value easy to use.

  (3) in the sub-tab of the columns, add all columns.

  (4) repeat the same steps to create the fact Table by copying the data store WC_SAMPLE_F under the submodel of "facts".

  (5) for the fact table, define the type of OLAP to "fact Table.

  (6) generate the DDL to create the table in the database.

  In step 6, I don't know where and how to generate the DDL to create the database table. Please help me. If you have another tutorial with screenshot, please share with me. Thank you.

  Kind regards

  Cong

  Hi Cong,

  Please see section 6.3 DDL generation of scripts in this link:

  Working with the Designer of the common Format - 11g Release 1 (11.1.1)

  I hope this helps.

  Thank you!

  Saran.

• Too many Tables in the database...!

  Hello!
  
  I am involved in a scenario where my application requires 200 or more tables in the database. In fact, I'm working on a medical diagnostic laboratories management system in which there are 200 types of diagnostic tests.
  Now, at the end before, I had managed to 200 forms of display, and the user will choose whatever form that it requires opening a form of disease B as form of disease, and thus immediately (use will fill in the data of the medical tests of the disease in the respective forms).
  Now that the attributes for each disease are different from each other, I would need to have 200 tables in my database to the main server, which would be stored 200 Forms data entry...
  But it seems unnatural that a large number of tables. So is there a technique to deal with this scenario...

  Here, we need to follow a term called "normalization". You make sure the number of columns is repitative in all these tables. You can then create a master table to the columns and then join this main table with others based on a common column that is ID or something like that.

  Concerning
  Girish Sharma

• Can not see the Tables in the database

  I have a 2003 Server (Server A) error results producing ISPS can't help you, so I have to step it up a notch intellectual and ask the world to help you please. Using a site on the server 'A', I create a database in DWMX and connection OK tests. I click on the + to view the tables and it constantly shows 'None' when there are tables there. If I move the configuration of the entire site to the right server 'B', the tables show perfectly. If I develop asp on the server B pages now and then copy to the site on the server 'A', they work perfectly, but if I try to go in the server behaviors 'A', I get an error telling me the tables could not be found.
  
  What settings or permissions on the server a necessary change for me to see the tables associated with database connections please. Thank you.
  
  Dave

  Hi, guys. Apparently it is a known problem for which there is a fix (found by one of the ISP in question)... Read on, and let others know. Thank you...

  This document comes
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19515#aspnet_db

  / Database connectivity fails with local ASP.NET and ASP servers.

  Question / * ASP.net: * when using an ASP.NET local test server on XP
  SP2 with Dreamweaver (i.e. the testing server URL prefix is set to
  (" http://localhost"), of database connectivity fails. If you click on the Test
  button in the OLE DB connection dialog box or the connection to the SQL Server, it
  says that the connection was made successfully. However, if you try then to
  Browse the tables in the databases Panel or in the DataSet dialog box,
  the database tables are not displayed. /

  / * ASP: * when the use of an ASP local test server under XP SP2 with
  Dreamweaver (i.e. the testing server URL prefix is set to
  (" http://localhost"), and you specify "Using driver on the test server" or
  "Using DSN on testing server," database connectivity fails. If you click on
  the Test button in the custom connection string or Data Source name
  (DSN) dialog box, it indicates that the connection was made successfully. However,.
  If you try to browse the tables in the databases or to create Panel a
  Recordset, the database tables are not displayed or you get the following
  error message: "unable to retrieve tables from this connection, click on".
  the "Define" button... "to test this connection. » /

  / * Workaround: * download and install the Dreamweaver extension fix
  <>http://download.Macromedia.com/pub/Dreamweaver/extensions/SP2DBFix1.0.2.mxp >
  by Macromedia, which solves this problem (Ref. 179021). To use this
  extension, follow these steps. The following steps apply to both ASP.NET
  and ASP sites:

  1 /In Dreamweaver, go to the files Panel and choose one of your
  Definitions of ASP.NET site. /
  2/Select site > advanced > remove connection Scripts.

  Note: If this option is grayed out, open an ASP.NET page in
  Dreamweaver. Remove connection scripts will delete the
  content of the _mmServerScripts folder, which is located in the
  the testing server folder. The _mmServerScripts folder is hidden in
  Dreamweaver files Panel, but will be visible if viewed with a
  different file browser. The _mmServerScripts folder consists of
  the following three files: adojavas.inc, MMHTTPDB.asp, and MMHTTPDB.js. the
  login scripts are used by Dreamweaver to run remotely
  connectivity of database in developing pages in Dreamweaver.
  These script files have no effect on your web pages to the course
  time of execution (i.e. when a visitor views your ASP.NET pages via a web site)
  browser). /
  3 /Repeat steps 1-2 for each of your ASP.NET site definitions. /
  4 / quit Dreamweaver. /
  5. / Install the extension. /
  6 / restart Dreamweaver. /
  7 / GB in the files Panel, select one of your ASP.NET sites, and
  Open an .aspx file. /
  8 / GB in the databases Panel and delete your existing database
  connections. Before deleting, make sure to open each
  connection and write down the settings. You can open a connection
  by double clicking on the login name or right click
  the login name and selecting Edit. /
  9 / create a new database connection. Use the same connection names
  you had before, so all existing pages with datasets and server
  Behaviors still work correctly. /
  10 /Click the Test button in the database connection dialog box. This
  Download the new login scripts to the testing server. /
  11 /Repeat steps 7 through 10 for each of your Dreamweaver ASP.NET site
  definitions. /

  / * Note: * this extension is compatible with Dreamweaver MX 2004 and
  Dreamweaver MX. The current version of the extension is 1.0.2. Version
  1.0.1 resolved a database with ASP VBScript connectivity problem
  server model. Version 1.0.2 includes the fixes in version 1.0.1 and also
  resolves the compatibility issues with Dreamweaver MX (version 6). You can
  see what version of the extension that you have by opening the Extension
  Manager. /

• ashrpt - ORA-20200: samples of ASH NO exist for the DATABASE/Instance

  Hello guyes,
  
  Please could you help me with the generation of the report of ASHES? I have the stack on:
  "ORA-20200: NO samples of ASH does exist for the DATABASE Instance / '.
  
  I tried to find how to sample, but the only things I found is for statspack or awr.
  
  Thanks a lot :)

  redy007 wrote:
  sb92075:
  SYS@PMBTEST > select * from v version $;

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit version of PL/SQL Production 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Production

  The active Session history exists only in the Enterprise edition.

• How to determine the level of Group of patches for the database Oracle EBS Server?

  Dear
  How findout patches for the database server Oracle EBS group level i.e. 10.2.0.3?
  
  Concerning

  Dear Suzy,

  I was looking for a patch of database being upgraded. After the database owner (enviroment) to supply file, I used the following command from $ORACLE_RDBMS_HOME/OPatch directory, command like $ OPatch lsinventory, he listed all the patches and updated patch also.

  'OPatch lsinventory' must list all patches applied to $RDBMS_ORACLE_HOME. For the level of database of the Group of hotfixes, you can use one of the instructions above to get the version. In addition, you can check to the BONE by running executable files (i.e. sqlplus, impdb... etc).

  And on request, I used-> -use $AD_TOP/sql/adutconf.sql , it is perfectly correct.

  Ok.

  But I can't go through of OAM,-diagnostics of Applications using, you can guide me. When I select plan of the site-diagnosis & repair - run diagnostic tests, it error. Say year error has occurred!
  Please note: you don't have sufficient privileges to perform this function.

  OAM and Diagnostics Applications are two different things.

  Diagnostics of applications can be run from "Oracle Diagnostic Tool".

  Note: 358831,1 - E-Business Suite Diagnostics run Instructions
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=358831.1

  Note: 167000.1 - Installation Guide for E-Business Suite Diagnostics
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=167000.1

  For the Group of hotfixes in OAM, follow the steps described in the following note:

  Note: 550654.1 - how to get patches Oracle Applications products in R12 group level
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550654.1

  Kind regards
  Hussein

• Help with the cluster in table for the cluster size difference, please!

  I will admit to still hurt with the berries of LabVIEW, and as usual, the behavior in the vi attached is meaningless to me!  The attached vi shows a cluster 6 element being converted into a table, then immediately to a cluster.  The reconstructed cluster has 9 elements, even if the table size indicator display properly 6.  How to maintain the initial cluster size when converting to and then since then, a table?

  The f

  Well, if you have worked with context-sensitive help running you would see:

  "With the right button of the function and select the Size of Cluster in the context menu to set the number of items in the cluster."

  The default is new. The maximum cluster size for this function is 256. »

  You must set the size. There is no way for the function to know how many elements in the table.

• Try adding conditions to clause "and" stored in the table for the where clause, unknown syntax

  I am trying to add additional segments to the 'where' clause, and I don't know exactly how to proceed. I am currently using another table to search for keywords and sometimes there aren't everything. I use this table containing the key words to search the description and associate a symbol with a path.

  The code loops through the keywords with the keywords most associated and try to find links to a symbol then excludes those and search for symbols that correspond to those with less keywords and all. I am able to do this with 6 queries and manually changing the arguments, but I want to loop together so that if the changes need to be made in the future, I won't need to go digging in the code.

  Thanks, but that's ok. I already have a solution for this.

• Tables of the database for users of Shared Services

  Hi all

  I'm discovering in the database tables, know when a user has been added as a group in Shared Services. This is for purposes of SOX. Can you let me know which database table, we need to check that we can get a timestamp date for added user?

  We use HFM 11.1.2.2 and Microsoft SQL server

  Thank you

  Steffi.

  Hey Steffi,

  I don't know any tables db HSS that contain this timestamp.  The CSS_GROUP_MEMBERS table lists groups/members, but no other information.  There are the timestamps for the CSS_USERS and CSS_GROUPS tables, but they show only when Aboriginal users/groups have been created and updated.

  The best way to record this information for your next audit would be to enable auditing of Shared Services.  To do this:

  • HSS > Administration > configure audit
  • Enable audit value
  • Select the items that you want to audit (Directory Management has elements such as 'Assign the user as a member of the group' and 'Remove user as a member of the group'
  • Restart the Services

  Thank you

  Erich

• Table for the code for method of payment for the suppliers site

  Hi all, does anyone knows how to get the value for the code for method of payment for the suppliers site in R12.1.3? I don't speak from that in the following path: 1 Paybles responsibility 2. Suppliers 3. Request for a 4 suppliers. Click on details of payment 5. Scroll to supplier Sites and press the update button 6. Note that, for example among the payment methods is checked as default thanks in advance, A.Stoynaov

  Hello

  Please check this note that contains the query:

  Default values for method of payment for providers at the level of the Table (Doc ID 737128.1)

  You can use this query to view the lines for a given provider site:

  SELECT *.

  Of iby_ext_party_pmt_mthds IEPPM

  WHERE IEPPM.ext_pmt_party_id IN

  (SELECT IEP.ext_payee_id

  Of iby_external_payees_all IEP

  WHERE IEP.supplier_site_id IN

  (SELECT APSS.vendor_site_id

  Of ap_supplier_sites_all of the PSA, ap_suppliers APS

  WHERE APS.vendor_id = APSS.vendor_id

  AND APS.vendor_name = '. '

  AND APSS.vendor_site_code = ''));

  Concerning

  Joel Purswani

  Support of Oracle

• There is 'table' for the object_type values?

  I wonder if there is a system view, or a table for all the values that can appear in the all_objects.object_type column? Or maybe the only way to get this list of os values to query with the distinct keyword dba_objects.object_type?

  Thank you

  Look at the source of the view:

  Decode (o.type #, 0, 'NEXT ITEM', 1, 'INDEX', 2, 'TABLE', 3, 'CLUSTERS',)

  4, 'VIEW', 5, 'SYNONYM', 6, 'ORDER ',.

  7, 'PROCEDURE', 'FUNCTION', 8, 9, 'PACKAGE ',.

  11, 'PACKAGE BODY', 12, 'TRIGGER ',.

  13, 'TYPE', 14, 'TYPE BODY ':

  19, "PARTITION TABLE", 20, 'PARTITION OF THE INDEX', 21, 'CRAFT. "

  22, 'LIBRARY', 23, "DIRECTORY," 24, "QUEUE."

  28, 'JAVA SOURCE,' 29, 'JAVA CLASS', 30, 'JAVA RESOURCE. "

  32, "INDEXTYPE", 33, "OPERATOR",.

  34, 'TABLE SUBPARTITION', 35, "INDEX SUBPARTITION.

  40, 'LOB PARTITION', 41, "LOB SUBPARTITION.

  42, NVL ((SELECT "EQUIVALENCE OF REWRITING"

  AMOUNT $ s

  WHERE s.obj #= o.obj #.

  and bitand (s.xpflags, 8388608) = 8388608).

  "MATERIALIZED VIEW'),

  43, "DIMENSION."

  44, 'CONTEXT', 46, "SET OF RULES', 47, 'PLAN OF RESOURCES."

  48, GROUP "CONSUMER."

  55, "XML SCHEMA", 56, "JAVA DATA."

  57, 'EDITION', 59, "RULE."

  60, "CAPTURE," 61, "APPLICABLE."

  62, 'EVALUATION CONTEXT ',.

  66, 'JOB', 'PROGRAMME', 67, 68, "JOB CLASS", 69, 'WINDOW',

  72, GROUP 'PLANNER', 74, 'CALENDAR', 79 'CHAIN ',.

  81, 'GROUP OF FILES', 82 'MODEL OF EXPLORATION' 87, "ASSEMBLY,"

  90, 'IDENTIFICATION', ' 92, 'CUBE DIMENSION', 93, "CUBE."

  94, "MEASUREMENT RECORD", 95 "CUBE BUILD PROCESS,"

  100, "LINE WATCHER", 101, "DESTINATION."

  "UNDEFINED"),

• Create a table for the web app components

  Hi all, I want to create one to display a list of web app components with the headings at the top of the table and the list of results, then under. See the result here Focus apartments, Brisbane

  I have 2 paintings put up here on the page, with the titles and the other containing the results. So there is no surprise for it being 2 completely separate tables that they don't line up correctly with each other during the display of the results.

  If I insert lines in the webapp layout, he repeats to each item in the list, which we don't want.

  How can I get these headers and data to align properly? No doubt there is a better way than this attempt. Thank you

  Create the table with thead and tbody element on the page. In the tbody add your module tag web app. In the available list web app only include the row in the table (not an entire table).