Table of contents referencing paragraph AFTER a heading

Similar Questions

• Table of contents is empty after creation

  Hi all, I have a document of 50 pages I finished to set the styles and formats.  Now comes the generation of table of contents, Figures and tables.  After setting my TOC and click OK, I get the loaded text icon, click and all I get is the title of "Content" and 2 empty lines.  What I'm doing wrong here?  I tried to create the table of contents in CS3 and CS4, both gave the same results.

  

  I got a sample file of the OP, and I spent the last hour working with her.

  I had exactly the same results when you try to create a table of contents with the file as it happened, so I tried to export to .inx and no change.

  Next, I added a few new pages and a new block of text and put it in a text of the sample using some of the existing styles. I managed to generate a table of new materials that had my samples, but not the op the original style with the same styles. I also noticed that my newly created text did not meet the definition of the styles, if she had no substitutions.

  I've deleted and recreated one of the styles, using the original formatted to set, and then reapply the style to both the original and my test text. There was no change of fonts.

  I tried to move the doc of test pages to a new document. Still no change in behavior, so I created a new doc and copied the master pages from the trial inside, then copied all the elements of the page a page of the test both doc and glued in place in the new pages in the new doc, with the correct masters applied. This required a loopback stories, but is better than starting from scratch.

  Incoming text brought the styles that it used, so I added a new image with a text of test, and this time the new text appeared the same as the current text, and when I did a test TOC text both old and new have been included.

  My conclusion from all this is that the original document is corrupt, and that .inx is not enough to fix it. Copying master pages, then the elements of the page on a new doc looks like it will probably fix with some work a loopback and re - create the table of contents of the styles that will not come because they are not being used (I presume) elsewhere in the document, but which is based on a very lean test and I have no idea what corrupted the original.

  Tommy Donovan at Adobe collects documents corrupt for the test, but don't make no claim to be able to correct them. You can send him an email. You can find more information to challenge My corrupt Docs of the ID

  Peter

• Table of contents, Index and changes in formatting disappears in RoboHelp...

  Hi guys,.

  Recently, I learned how to link and synchronize with RoboHelp Word documents. However, I am having a few problems when I updated the project RoboHelp change Word document after I right click on the file > update inside the pod project manager.

  The current challenges, I am experiencing the following:

  1. The clue that I have configured with the selected words of subject pages becomes empty after I updated the Word document in Robohelp.
  2. The table of contents becomes white after I updated the Word document in RoboHelp.
  3. I had to remove the excess on some Pages in the topic space because it looked funny when the previewed image. When I updated the Word document in Robohelp, returned the excess space that I removed...
  4. Another weird issue is that, sometimes, the changes I make in RoboHelp overrides any Word document. For example, if I have added text to a particular topic within the Word document and save it, Robohelp will not update the contents of the pages of the section with the Word changes even after I've updated the file inside RoboHelp...

  I'm not entirely sure how to work around these problems or if I'm doing something wrong. I really want to use the capabilities of RoboHelp synchronization, as it is more efficient for single source reasons.

  Advice and suggestions would be greatly appreciated.

  Thank you

  1. You do not use the project for related Word documents index. You insert a placeholder for a separate index. See the pages on the links on my site.
  2. I guess that now you do not have OCD, other than that of the linked document.
  3. It's probably because the excess space comes from the Word document. You will need to fix here.
  4. To get a change in RoboHelp and a different change in Word, when you update the RoboHelp change sticks and the word it is not applied? Which can only happen if you protect your changes. Again, see my site.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• When I linked book FM, I have files in the project files, but no chapter file in Table of contents chapter

  Using RH9 in TC 3/Windows XP

  I've linked to a number of books in this project. A book has all the chapters files well displayed in project files folder in the project manager, but have no books in the table of related materials.  Only topics.  How to fix this problem.  It seems that I deleted all the files in the table of contents before that I can delete the TOC file in the project manager, but is it anyway to regenerate the table of contents?

  Thanks in advance for the help.

  Mary

  Hi parties,

  You don't want to say that the table of contents are different in RoboHelp compared to FrameMaker TOC, please take a look at this blog http://blogs.adobe.com/techcomm/2010/03/demystifying_mapping_filesettingisf_and_toc_genera tion.html- it might be useful.

  you don't Ned to remove the link from the book of RoboHelp can just make changes in FrameMaker or update and correct path of TOC in RoboHelp and Force the link to update.

  It should make changes in ROboHelp TOC.

  In addition to that you can change the table of contents to RoboHelp after generation according to your need (these changes are going to get is returned on the next update)

  Hope this will help

  Ashish

• Table of contents indented to a title that should not be indented

  Hi, Gang!

  I created a table of contents of a book and the entries of table of contents for the two pages of separation are indented, when they shouldn't be. The style of table of contents for the separator page header has no indentation and entering the reference TOC page seems correct. To make the things unknown, two entries are indented different amounts in the table of contents.

  Here is a screenshot that shows 1) the first entry in the table of contents (far back), 2) the second entry in the TOC (less indented, but always indented) and 3) style of separator on the referring page page.

  I'm puzzled.

  Does anyone have ideas why this withdrawal could happen?

  Thank you very much!

  

  Rocky,

  OR Ctrl-click on the text box and uncheck the BOX allow for sideheads. For reasons unknown to me, Framemaker sometimes turns this when you create a new table of contents or an Index.

  Van

• Table of contents for the issue of the ePub

  InDesign CS5; Mac OS 10.6.5

  When I export my TOC document to ePub, do not show the table of contents, only the last two pages with text and an image.

  The table of contents defined paragraph styles. I think I have my correct export settings.

  Help to isolate this problem is appreciated.

  Note: Display of other documents in the book via ePub export display correctly, although the book must refine to ePub format.

  Also, when I tried to export the entire book through the book panel, InDesign starts export, but no activity in the progress bar. I have to force quit to get out of the endless loop. Then when I restart InDesign, Untitled files begin to open, 10, 20 and so on. So, I have to manually close each file.

  I suspect that OCD is causing this issue.

  Yes, that's correct. Once I've re-recorded old files "CS" in the new version, including the file book. Everything worked well.

  And I don't mean just making a backup (thinking that will result in savings in the current version) I want to talk about a backup - as in another folder in a different location... ie you Office

• Table of contents - do not enter the table header overflow

  Hey,.

  In my table of contents, I listed two styles:

  1 table of contents Title Page

  2 - the ToC table header

  I also have my table set up correctly - headers, so when a Table flows to a second page - table headers appear in this second page as it should. The tables are large - and not the way to avoid overflow. I think that the principle is called "Text Threading" - but it also works with the tables.

  In the majority of cases - the implementation works perfectly.

  HOWEVER when the table flows to a second page - TocTable header does not appear in the Table of contents regenerated.

  For example, the table of contents looks like this:

  Electric Page 6

  Machine X - Y - Z Page 6

  Electric Page 7

  Electric Page 8

  When it SHOULD look like this:

  Electric Page 6

  Machine X - Y - Z Page 6

  Electric Page 7

  Machine X - Y - Z Page 7

  Electric Page 8

  Machine X - Y - Z Page 8

  Is this possible? I have looked at all - and cannot find all the options.

  Thank you!

  Clarify: X-Y-Z Machine is the title of the table, and he appears in a header row (repetition) over a several page table? And you want each occurrence of table header appear in the table of contents and not only the first occurrence?

  I don't think it will work this way. Header lines is modified on the first page of a table: other pages just repeat the info, but it is not accessible. It would work if you put the title of table above the table (not inside) and it repeated manually at the top of the pages. It's more work, but it will get the desired result. You mentioned that it doesn't happen that often, so maybe that's a doable "workflow" for you.

  That said, most of the TOCs brings you to the first page of a chapter, section, paragraph, and table and do not repeat the entry when the chapter, section, paragraph or a table contains more than one page. If I have sought to your table of contents and wanted to see the section on electricity, I have to stop and wonder what page to go to the first. I think that eventually, I would choose the premiera.

• Entries of table of contents in the first word of the paragraphs

  Hi all. I would appreciate your help in this matter.

  Currently my page format will-

  Section

  1 subtitle. Lorem ipsem asjdlffojsdlf asldfjlsjfklsf.

  These two have a point each, with the other having automatically number each paragraph style (where the 1. + the dash).

  The Question- How can I get my OCD to show that the word 'subtitle' and is not the number, and the rest of the paragraph is?

  Also - think There are a few paragraphs that have the same style (so that each paragraph numbered), but I don't want to show them on the table of contents, as they do not have a subtitle.

  Your help is very appreciated. Thank you all.

  Ah, you're right. You cannot apply the condition directly as part of a style of characters, but you can always do it in several steps.

  First define the style of character, and in this case everything there need for attributes is a unique name. Once defined, apply it to the text a nested style or GREP style in your paragraph style from the list after the text that you want to keep the separator character before the page number. Once the generated table of contents you can use find/replace to find this style of character and to apply the condition, and then finally to hide the State in the Panel (State must be visible for search/replace to apply it).

• I'd like to produce consistent spacing before and after the section headings in the table of contents

  Hello

  I am trying to create a style for the entries of table of contents for the titles of the books section. I would have a little more vertical space between these securities and two other section titles or sub-section titles, like so:

  Section 1

  Paragraph 1 a

  Paragraph 1(b)

  Section 2

  Section 3

  and so on. To do this, I can easily add a space before and after the space for the section title style. The problem comes when there are two titles with no intermediaries paragraphs, such as 2 and 3 in the example above. Then, the space between these titles is double. If I set is a nonzero value space before or after the space, but not both, then the titles won't be correctly spaced in areas where it has paragraphs either below or above a section title. Does anyone know how to get a uniform spacing?

  Thanks in advance for any advice!

  Make a third style for the case where there are two titles of section together.

• How can I include a table of contents header in a second table of contents?

  I created a main table of contents for my Indesign CC document with all paragraphs which have "Heading 1" paragraph to be their style includes. That work perfectly well... with one exception: the topic of other TOCs. I use more than one table of contents, for example one for an index of the tables. These have their title defined yo "Heading 1" style, but the main table of contents simply do not include them even if I put it to include everything with "title 1" it cuts style. "." How to fix this?

  For reasons I don't quite understand (but probably have to do with not to create a recursive loop problem that happen if you try to use the same style in the current TOC), ID don't look in the stories of the TOC for the paragraphs to be included in a table of contents. You must either add a placeholder point nonprinting pick it up on the page to a table of contents or manually insert the text in a table of contents generated.

• Table of contents for the edition of ePub paragraph style

  I am trying to figure if InDesign can allow us to the editor the dynamic table of contents. What we have is essentially the following:

  Chapter number (single paragraph style)

  Chapter title (single paragraph style)

  First paragraph (single paragraph style)

  We want that the ToC that gets pulled up in an eBook reader to show this:

  Chapter 1: Chapter title

  Chapter 2: Chapter title

  At present, only InDesign appears to export each as a specific paragraph style, without setting them on the same line side by side. We're stuck with:

  Chapter 1

  Chapter title

  Chapter 2

  Chapter title

  Does anyone know of a way to export the ePub is what we want rather than this broken hirarchically way?

  There is no good way to do it. We must either go to the ePub after export, or change the style, so there's a return between the chapter number and chapter title instead of a return. The second option will involve completely restyling, and get in there colon will be delicate.

• Paragraph styles are not properly in automatic Table of contents

  Hi all

  I'm currently busy with the lay-out of my doctoral thesis in Indesign CS6. I did the separate files for each chapter, after that, I joined the files in a document of a book. Now, I need to create a table of contents and want to do using the Table of contents style.

  I've already customized a table style content in which I said Indesign which paragraph styles should be included in the table of contents. I also created new paragraph styles to use as entry style. When you create a table of contents the lay-out seems just perfect, except that I set the text for being "fat" in my paragraph style, but it comes in the form of 'regular' text in my table of contents. Now I can pass this "BOLD" text by selecting it and alt + shift clicking on the paragraph style in the paragraph style menu. Problem is that after updating the table of contents text back to "regular". All the other stuff that I defined in the paragraph for entry style style (e.g., tablets, the font size, leading) are applied.

  How can I solve this problem? I would appreciate your comments, because it's annoying me a lot: S.

  Thanks a lot already!

  Did you apply a character style to your topics throughout the book?

  If so, this could cause the erratic behavior that you see.

  Check your table of contents update to see if there is a character applied to the imported text style.

• Can I change the header typecase 'Table of contents' to the 'Table of contents' or I'm stuck with it in Captivate 7?

  !

  This header can be replaced by your title. Click on the Info button for

  Table of contents, fill in the title field with the text you want to appear.

• Police of change on the header of the table of contents

  Anyone know how I can change the font on the header of the Table of contents in Captivate 8? I can't find anywhere on the skin Editor.

  

  He is buried in the skin Editor. Go to the part of the table of contents of the Publisher of the skin (shift + F10). Then click on the info at the bottom button. The following screen should appear. You must be sure to select the actual header including police label you want to change.

  

• Table of contents - off after having generated.

  I have a real problem to generate a Table of contents.

  I have three different paragraph styles:

  I select in the menu table of contents, but when it generates turns my paper of 40 pages.

  Any ideas what I am doing wrong?

  I think that what has happened here, is that you had generated a table of contents sooner and threaded to the frame of the table of contents with the other images in the document. In this way the history became a FAKE story.

  Now when you generate the table of contents with replace content on executives all text gets deleted so the table of contents can go, but the TOC would not get generated for any text at all because the text has been deleted.

  I suggest that you never screw the frame of the table of contents with the normal chassis.

  Even now, I would say that you copy all the text (no COT) and paste into a new framework and flow on other pages. Then generate the table of contents.