Table of contents with empty lines at the end

Similar Questions

• Sensitive HTML5 seems to be the construction of a table of contents with a "bc-#" at the end of the favorite locations leading to failure. Can this be avoided?

  RoboHelp11 generates a table of contents where the places of the xxxx.htm #aaa of the form have a bc '-' and a final number added.  In the same place that a link in the text does not.

  No doubt there are some settings that causes this.  How can I disable this addition?

  What is the fault you are experiencing?

  The #bc-# are added when a subject is used repeatedly in the table of contents. HR uses this fact to know what breadcrumbs that they must. To avoid this, use excerpts rather than add the topic to the table of contents, several times.

  Kind regards

  Willam

• Chapter numbers will appear in the table of contents with page numbers...

  First of all, thank you all so much for the display of the answers.  This forum is wonderful.

  I have a doc that needs to have chapter numbers appear with the page numbers in the table of contents.

  I insert the < $chapnum > and < $currentpagenum > in the footer and I get 1-1 appears.

  To include 1-1 in the table of contents, do I have to edit the referring Page, or is there another way.

  Thank you very much for your help!

  Change the reference to the table of contents page to use the building block as well as the first page, which is <$chapnum>chapnum.<$pagenum>

• Table of contents is empty after creation

  Hi all, I have a document of 50 pages I finished to set the styles and formats.  Now comes the generation of table of contents, Figures and tables.  After setting my TOC and click OK, I get the loaded text icon, click and all I get is the title of "Content" and 2 empty lines.  What I'm doing wrong here?  I tried to create the table of contents in CS3 and CS4, both gave the same results.

  

  I got a sample file of the OP, and I spent the last hour working with her.

  I had exactly the same results when you try to create a table of contents with the file as it happened, so I tried to export to .inx and no change.

  Next, I added a few new pages and a new block of text and put it in a text of the sample using some of the existing styles. I managed to generate a table of new materials that had my samples, but not the op the original style with the same styles. I also noticed that my newly created text did not meet the definition of the styles, if she had no substitutions.

  I've deleted and recreated one of the styles, using the original formatted to set, and then reapply the style to both the original and my test text. There was no change of fonts.

  I tried to move the doc of test pages to a new document. Still no change in behavior, so I created a new doc and copied the master pages from the trial inside, then copied all the elements of the page a page of the test both doc and glued in place in the new pages in the new doc, with the correct masters applied. This required a loopback stories, but is better than starting from scratch.

  Incoming text brought the styles that it used, so I added a new image with a text of test, and this time the new text appeared the same as the current text, and when I did a test TOC text both old and new have been included.

  My conclusion from all this is that the original document is corrupt, and that .inx is not enough to fix it. Copying master pages, then the elements of the page on a new doc looks like it will probably fix with some work a loopback and re - create the table of contents of the styles that will not come because they are not being used (I presume) elsewhere in the document, but which is based on a very lean test and I have no idea what corrupted the original.

  Tommy Donovan at Adobe collects documents corrupt for the test, but don't make no claim to be able to correct them. You can send him an email. You can find more information to challenge My corrupt Docs of the ID

  Peter

• Table of contents are empty

  Hello

  I create a table of contents that is empty. After reading the other reviews to check the 'editor' mode it is nothing else created but the specified title.

  Please see below:

  

  Table of contents style:

  

  I have run the 'SplitStory' script and also erased all replacements to ensure as well.

  I have ensured that only the text fields specified are in the style of paragraph title Table of contents

  General information:

  It is a 11-page master document.

  I'm new to indesign and changed another format of people how much I need for a data merge.

  The last thing I need to work is the content.

  Hope you will be able to help me,

  Best regards,

  Chrissy

  I took another look at the screenshot and I think I see the problem. Your position is on a master page. Table of contents does not pick up the elements of the master page, but you can ignore it on the document page and it should work.

• You can create a table of contents with page numbers using bookmarks?

  You can create a table of contents with page numbers using bookmarks?

  Sometimes a long article has bookmarks to help navigate, it but has no real TOC (table of contents) on the first page. In such a situation, I think that it would facilitate the reading of the paper version if you can somehow create a table of contents with page based on hierarchical bookmarks in the document numbers.

  If this is not possible from Acrobat, is there a third party app?

  Indeed you have created a script for this - sorry that I missed it. I should have...

  Acrobat - Create TOC bookmarks

• Small square boxes, which appear on empty lines (UPDATED) - the question is, how to get rid of them?

  As for my display name "all I tried were in use"-when I registered on the Adobe site to use the Lab browser, I tried something like 10 or 12 user names and finally gave up and is gone with ' all I tried were in use "-my name is Bob

  ------------------------------- UPDATE --------------------

  The problem, small square boxes showing on the lines Freetext tool reviews, is not limited to blank lines, as I originally reported here. These boxes are appearing at the end of each line. It does not matter whether or not the line break is hard or soft, if the line is empty.

  Please read the original message, taking into account the fact that the problem occurred at the end of all lines.

  Also - Here's a screenshot of part of a comment area, showing the square lines. I didn't show the entire box because the material above the area I'm showing is a tad private or confidential. Here is the picture showing the boxes - note that there is no box at the end of the last line in the comment.

  
  --------------------------------------------------------------------

  -Original message-

  We have a copy of Acrobat 5.0. and so far he has done what we need, which is not much more to add bookmarks, links, and some retouching. I know it is very old and I know that things are changing. I hope that this has nothing to do with the version we use. I think it is a problem of compatibility if this is a problem with the newer versions of PDFs with reader 'edition' with 5.0.

  I have small square boxes appear on empty lines. (read my update above -boxes are at the end of all lines, conditional jump or jump) )

  I'm a programmer (37 years and more and more aspects of the processing of data) and I decided to learn PHP programming "language" to add some treatment of some of my web sites on the server side. So, I found a pretty good php to PDF manual and would use.

  I quickly found that the PDF didn't have one link and no Favorites, so I've been adding them as I search for a particular topic. I am also add comments and notes to document things not in the original manual or add comments that would help other programmers (who know other languages) to fit like the PHPs think - for example: in all the other languages I know (perhaps two dozen) to get rid of a file, 'delete you '. In PHP "unlink you" it.

  I added a lot of comments and notes like that and when I view the PDF in Reader (on this computer I 9.4.2) I see little boxes square on empty lines. The lines were created when I pressed ENTER twice to insert a blank line between paragraphs. (again, read the update at the top of this message - boxes are at the end of all lines, conditional jump or jump)

  How can I get rid of them?

  They are not present when I open with Acrobat PDF, only when I use an Acrobat Reader.

  They are also not present if I look at the comments using the comments navigation panel - in other words, they always show on the page, but they do not show in the copy of the comment displayed in the navigation panel.

  They are not present in the Notes or when I use one of the shape tools (square, circle or line tool) to create notes. They are no longer present in the Comments of Freetext tool

  They clearly show where there is a line successive characters feed/carriage return - but how can I get rid of them?

  I JUST THOUGHT of SOMETHING - I realized that I had not printed the pages on which I placed the comments and I was wondering if the boxes appear when you print the PDF file with reader - they don't. They are not present if I use Acrobat, not a reader, to print the same page.

  You can provide any assistance will be greatly appreciated.

  Please don't tell me to get a newer version - an expense that is simply and completely out of the picture. For us, it is a depression, not a recession - we are independent and our businesses have been severely hammered since 2006 - we are at about 1/4 of our profit before the big players trashed the economy.

  Bob

  P.S. Do you know that you can have a heart attack without pain in the chest, shortness of breath, or left arm pain? Well, you can! I had two and one almost killed me because I had no idea it was a heart attack. You can read about it here first one. Convey this, it could save a life.

  My second heart attack took place October 4, 20112 - he started, about 03:15, as did one, with a headache. It turns out the implanted stent in 2002 had been completely clogged by too many cultured tissue. The doctor put another stent inside one.
  

  Problem solved - it is a police problem. Apparently Acrobat cannot manage specific fonts and it is best to stick to a very small selection of font - Arial, Helvetica, Times Roman.

  I have not test a large number of fonts. If I do, I'll post there results here.

  Bob

• Table of contents, do not update when the project is saved

  The Table of contents is not save when the project is saved. To view the saved changes, I have to close and reopen.

  I'm sorry, so sorry. I forgot to add that my esteemed colleague and fellow Adobe Community Expert Peter Grainge has some fabulous on its site information if you go with merged WebHelp.

  Click here to see

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Qosmio G10 begins with vertical lines on the screen

  Hello, can anyone help?

  When I try to start my sign qosmio G10 comes on with vertical lines on the screen. And the screen goes black and I can only hear the fan.
  In VGA mode, it begins upward, but always with the lines on the screen.
  Is there something wrong with the video card? In my view, that there are more people with this problem.
  Toshiba offered little help?

  I'm 'out out of warranty '. I need to by a new complete motherboard or y at - it another option? Replace the video card?

  Hello

  Its a shame about the warranty because you ask the service partner Toshiba for the verification of the laptop and this procedure would be free. You know, the warranty would cover the audit of the laptop.

  But I would say the external display connection and then you can check if the same vertical lines appear on the external display.
  If you see the lines on the second monitor, then I guess it could be something wrong with the graphics card or motherboard.

  I think that this procedure is the best way to find out what could be the problem, but anyway, I think you should ask a technician for assistance if you want to solve this problem.

  PS: Have you tried to reinstall or update the graphics driver? I think you should do it but I don't know if it will help you, but you know Mr. try is free ;)

  One of my friends had a similar problem with the vertical lines on other mobile manufacturing, and it was a WLan cable which was responsible for the strange lines on the screen.

• The implementation of the method of Frank Nimphius's to insert a line at the end of a table?

  Mr President.

  The implementation of the method of Frank Nimphius's to insert a line at the end of a table?

  https://blogs.Oracle.com/jdevotnharvest/entry/how_to_add_new_adf

  I put this method is my CustomerViewRowImpl class

  Like this

  public String onRowCreate() {
   BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
   //access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
   //in this sample
   DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("allDepartmentsIterator");
   //access the underlying RowSetIterator
   RowSetIterator rsi = dciter.getRowSetIterator();
   //get handle to the last row
   Row lastRow = rsi.last();
   //obtain the index of the last row
   int lastRowIndex = rsi.getRangeIndexOf(lastRow);
   //create a new row
   Row newRow = rsi.createRow();
   //initialize the row
   newRow.setNewRowState(Row.STATUS_INITIALIZED);
   //add row to last index + 1 so it becomes last in the range set
   rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow); 
   //make row the current row so it is displayed correctly
   rsi.setCurrentRow(newRow);                          
   return null;
  }  
  

  My iterator name is CustomerView1Iterator

  What to write get the method at line 5 above

   DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("allDepartmentsIterator");
  

  Concerning

  Hello world

  I put my name to vo iterator CustomerView1Iterator instead of allDepartmentsIterator.

  And it works quite well

  Concerning

• We can insert a new line at the end of af: table declaratively?

  Mr President.

  We can insert a new line at the end of af: table declaratively?

  Concerning

  In the t impl class substitution as below, after that, you should be able to insert at the end of the table.

  @Override

  {} public void insertRow (rank)

  Line lastRow = this.last ();

  If (lastRow! = null) {}

  int j = this.getRangeIndexOf (lastRow) + 1;

  this.insertRowAtRangeIndex (j, line);

  this.setCurrentRow (row);

  } else {}

  super.insertRow (row);

  }

  }

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• Installer of Lexmark printer drivers saved in a folder "c:\Program Files \" (with a space at the end of this one!)

  I have a real problem.

  On my Windows 7 Professional machine somehow is an automatic update of installed Lexmark printer drivers and the installation program saved files
  in a folder names "c:\Program Files \" (with a space at the end of this one!)

  This all happened the day after without seeing me what was going on.

  It seems that the Windows 7 system does not like the folder or file names ending in a 'space' or a 'period' and it will not work with it.

  The side effect is that in some sort the system has copied EACH name on this new folder called sub0folder "C:\Program Files-" and I ended up with TWO files that have the air of the same name (even if we have a space at the edn of it ".

  It isn't really a problem in what I could simply ignore it (the other folder names corrrectly operates always OK). The only problem is that changes to 'Security' affect the TWO files because Windows 7 sees the two folder as the 'same' names when setting security.

  That's why, when I tried to mark the 'bogus' as 'not available' folder to everyone (including the system) it is the same for 'Program Files' (the real one) with disastrous consequences. I had the chance to get out and restore some semb; launched sound mind to my machine.

  But I'm stuck now with this annoying issue with many sub-fdolers (which are all unaccessable because the system cannot locate).

  My question is, how to remove a file that has a 'space' as the last part of his name when Windows Explorer cannot work with it?

  Thanks a lot with no matter what helpf with this very unusual problem.

  If you have the opportunity to make a complete picture of the system of the disc, I would before you try the following... just in case remove the "bad" folder ends up deleting all good also.  Alternatively, rather than remove the directory in the last step below, rename it using a command like

  ren c:\PROGRA~3 c:\badprogs {press Enter}

  If program of the 'real' the files and other directories survive unscathed, and then delete the C:\badprogs in the usual way.

  ******************************************

  In the search box, type cmd, then right click on cmd.exe and select "Run as Administrator".  Give the password when you are prompted.

  Type

  CD c:\  {Press Enter}

  to switch to the root

  Now type

  dir /x {press Enter}

  This will show you a list of directories of names "short form".  You will probably see something like this (from a x 64 Win 7 installation, is why there "Progra ~ 1" and "Progra ~ 2" directories ")

  Directory of c:\

  01/08/2012 13:19

  PROGRA ~ 1 Program Files
  30/07/2012 13:03 PROGRA ~ 2 Program Files (x 86)
  03/07/2012 10:46 users
  30/07/2012 20:16 Windows

  In your case, your directory parasite called or PROGRA ~ 3 (if you have x 64) or PROGRA ~ 2 (if you have Windows 7 32 bit).

  Now that you know the name short, which allows to delete:

  del C:\progra~3 {press Enter}

• Remove empty lines in the merged table

  I'm looking for a script that will find and remove empty lines from a table that contains fields of fusion.

  I have a table of data with about 800 cases. This table is used to merge a page report which shows the various components of the employee's income. There are about 20 lines in the table and 5 columns. I apply the merge fields to a table in my .indd file and merging works perfectly. However, there are several features/components of income who share not all employees. Therefore, all pages of the 800-page report contains several blank lines should I have deleted so that the remaining data lines to snuggle up to each other.

  I need a script that will find blank lines in an .indd table and delete them. I found the script that did this and works perfectly on an ordinary table with blank lines. However, it seems that a table cell that contains a merge field (< < myField > >) is not necessarily 'empty', even if the data in this field is Null. I found that after the merger, I can highlight a blank line, press DELETE, run the script, and the line disappears, as needed. But it manually thousands of times would frustrate the purpose of the script. Also note that I've rubbed my data file to ensure that no hidden formulas, characters or spaces. The "Remove blank lines for empty fields" option does not work on the fields in the table (it seems to me. If I'm wrong, let me know).

  It seems that I really need script which will remove references to empty merge fields after the merger. I could run and then my other script.

  I have spent hours on this and hope someone can point me in the direction of a solution.

  Thank you!

  You can remove the markers of merge field by doing a search and replace of TEXT PLAIN for and replace it with nothing. That should allow your script to work.

• Generate the table of contents with chapter markers?

  It has been a while since I had to install and create a table of contents for a long document of single file, but I'm sure that I created TOCs in this way in the past. Then, why the text in the Section markers will appear in the table of contents? It is even possible to generate a table of contents that contains text of article marker?

  I use InDesign CS5 in Windows. I have a file single document I'm trying to generate a table of contents for. I designed a 16-page manual in an inDesign file that includes a cover page, table of contents page and seven "chapters."

  I created a separate section for each 'chapter' and used Chapter markers in the top of the page master for chapter names. It's something I did in the past of syntactically long documents containing several chapters.

  I put the first page of each 'chapter' as a new Section on the Pages panel. In numbering and Section Options for each page, I checked the Section getting started, Automatic Page numbering, the Style of Page numbering: 1,2,3,4... and in Section marker: I put the name of 'chapter' in the text box.

  

  I've set up paragraph and character Styles and has used throughout my document. When I put in place the table of contents I created everything correctly, including a heading style that I used for all the sub lines in my file and my style of Section marker for chapter names.

  

  When I insert the table of contents, generate headers sub with their page numbers, but the titles of the chapters which are chapter markers do not generate. Am I missing something or is it still possible to enter the text of chapter markers in a table of contents? I'm sure that he's worked in the past. Can anyone offer a solution for this?

  Thank you

  Kat

  Looks like the markers section present only in the table of contents if they are on a document page. Try manually to the substitution of the frame.