Table of contents wrong

Similar Questions

• in the Table of contents, my photos are not displayed, can you tell me what I am doing wrong?

  I am writing an iBook on a Mac Book Pro of the retina, and when I go to see the table of contents it shows no picture... so I do something wrong, or not do something, everyone knows what this might be? Here you have a Table of contents on iBook author image. It is said that there are 5 chapters and Chapter 3 marking and it should show the main image of this chapter and down a row of thumbnails of all pages of this chapter. Nothing shows... I'd appreciate any info to solve this problem. Thank you.

  

  Quack quack.

  the thumbnails do not appear when you look at the table of contents to the author of the ib.  You must create the .ibooks file, do a preview for mac, and open it with the ibooks software and you will see knock thumbnails view or put your book on a iPad and if switch you to the comparable iPad display, thumbnails will be visible there.

  In addition, you must file an image file in the placeholder, which will be visible on each index type toc page, yes a picture shown throughout the book.

  good luck with your book and I hope you sell 1 million copies.

• Table of contents displays the wrong fonts... Sometimes

  When I generate a table of contents, it generally works well, but sometimes text comes from the size and color of the text source instead of the assigned police of OCD.

  I have a my "TOC 1" paragraph style value 9/18 black points.  One of my headers is partially oversized and reversed text to white 36 p. It is not saved as a character style, just make it bigger.  Rather than follow the assigned table of contents 1 style, this text is available in white 36 p. I have other places where the headers are reversed and or resized and it displays fine in the table of contents.  In some cases, the table of contents comes in the color of the text source... but most of the time it comes of as it should be, as the color of the table of contents 1.

  Why the inconsistency?

  I keep digging and I found the answer. It's more than the "local formatting". It is "localpartial formatting" that replaces the table of contents style.

  I saw this initially because it was only a space empty at the end of the header which is different, so it was invisible to me.

  If the text in a header in the doc is exactly the same, no matter how it is modified locally, the TOC style is applied in its entirety.

  If any part of this text is different, the table of contents will be changed... BUT:

  Different changes apply to different parts of the line in the table of contents. So we can predict how some inmates / change will apply.

  If this is supposed to be a feature rather than a problem, it's a pretty bad; too many incompatible variables.

  The graph below shows some of the results possible.  At least now I know what is the problem and how to avoid it.

  

• Table of contents exporting does not correctly - what I am doing wrong?

  Hello

  I have 2 books of ID (CC) I exported to EPUB recomposable. The first one I created worked perfectly.  I created a nice table of contents who when they are imported into iBooks the iBooks TOC was just as it was in my table of contents in the document.  The 2nd book has the file names listed in the TOC iBooks rather than what is specified in the table of contents of the document.  I checked a number of settings and they seem to be the same on both books.

  As a bit of background, the books are almost the same except that they are in different languages.  I used the same template to create documents within each book.

  Any ideas would be GREATLY appreciated.

  See you soon,.

  Lil

  Hello

  If the table of contents style is not set in the original document style, toc file name is generated instead. You have configured by Style of table of contents in the Document Source Style of the book?

  Also, the same style must be selected in the Navigation drop down during the recomposable EPUB export.

  Kind regards

  POOJA

• Table of contents: not positioned wrong page numbers

  When I create my "list of Figures" (A Table of contents item type) I get ugly results such as (p83 and p84):

  

  and (p105)

  

  There is not always a dashed line and page numbers are not always end on the right. Is there a way I can influence it?

  I found a solution, less elegant, but it seemed to work in my little test. Add a GREP style to your paragraph to add a character without pause style tab and the number. (This corrects the independent left-aligned numbers).

  

  Then do a search and repalce to add a space before the tabs. The result is far from ideal, because it leaves a space between the text and the leader, but it seems to solve the problems of end of line too tight.

• Table of contents with wrong number pages

  Hello world
  I m trying to generate a rtf with a table of contents on its model.
  My problem is that the numbers that refer to the page numbers are all 0.
  
  In the model this page refered by numbers are ok.
  
  I ve seen this unanswered question in some other threads but I hope someone can help me.
  
  Thank you

  Don't get any ideas.
  I don't know that it needs to be updated manually once you generate the RTF by right click, TOC and update.

• Paging in the poorly aligned table of contents

  As you can see in the screenshot below, the pagination is right-aligned, sometimes in the table of contents, and sometimes it seems all wrong. What should I do to fix this?

  

  Hello joachim,.

  Pages 5.6.2 on OS X El Capitan 10.11.5

  Menu > view > show rules.

  You can select (click) each level (Style) of the Table of contents and view the parameters of the rule.

  

  

  With the second level selected, look in Control Panel of Format > text > tabs

  

  Please call with questions.

  Kind regards

  Ian.

• Table of contents: linking the titles and page numbers

  Hi all

  In my paper, I created a table of contents.

  Like most books, I want to link titles and paragraphs to their pages by a dotted or dashed, just like that:

  Title - P2

  subtitle - P3

  etc...

  I also use these links in checklists to connect the left side of the list to the right side.

  And this isn't something wrong: this faclity Visual really helps you recognize what's on poles on the right with the correct item on the left.

  Is there a way or a function in Pages to automatically create these links instead of typing for each item in the Table of contents (which can be very long, little time)?

  Thanks for your time.

  Lopez.

  With your table of contents is generated, click each item in the table of contents (for example, title, subtitle, title 1, etc.) so that it appears highlighted. Your right in v5.6.2 Pages panel will show the Table of contents and a text label.

  Further down in the text tab, there will be an area of tabs. If it is not expanded, click the word ▸ tabs. Click any selector in the column Leader and the choice of your choice for your boss to fill. There is no provision to set a color of head. Here is an example:

  

• Table of contents in the report of the wcf

  Hi, I'm looking for include the Table of contents in a report of wcf (by setting the 'see the Table of contents' true in the display configuration layout PDF) and see a blank page is generated for the Table of contents page. The report contains several nested views (up to 4 levels), I tried with different values for "Max depth of content table" 1, 2, 3, 4, 5 and see the page table of contents is always empty. "" Can you please indicate what could be wrong. Thank you, Vincent

  Hi Vincent.

  Can you post a screencap of report definition page?

  Thank you

  Robert

• Can someone just list all the reasons that may explain why some elements will not be displayed in a table of contents?

  Extremely frustrating. I've set up a catalogue, all the section headers I want to appear in the table of contents are tagged with the same paragraph style, but he simply refuses to include some of them - after a certain point in the book. I looked at all that I can think of to try to see what is different about these elements - and nothing. I have searched forums, cannot find a response - perhaps because it is a general question. But there are several reasons why for example the Annotator gradient may not appear in artificial intelligence (another thing that drove me crazy)... hoping someone similarly list the main factors that can break a table of contents, and I hope that my answer will be there somewhere.

  Nothing wrong with Win 7 (my OS of choice).

  This seems very unlikely in your case, but check to make sure that you have not the multiple styles with the same name in the groups of style or with capital letter.  You might want to try this, too: remove minor corruption by exporting

• Table InDesign content model

  Hello

  I would like to creat content/index United Nations table and include in a paragraph styles that are in my model (gabbarits), but it does not work. Is it possible? How?

  Also I would like to place the style of paragraph 2 on the same line...

  Please help me

  You cannot have two paragraph styles on the same line, but you can use styles GREP and/or styles nested to automatically add Character Styles to specific parts of your line.

  The extent of why you cannot successfully create your Table of contents of your paragraph style, explain what you tried and what has happened.  Screenshots help us understand your process and maybe understand what goes wrong.

• Publish online Table of contents does not

  I have published two documents printed with the publication online (InDesign 2015). Everything works well except the table of interactive contents (which works fine when I export to PDF).

  The table of contents in the online version gives an error when you click on the entries.

  Is this a bug or I do something wrong?

  Hi Melissa,

  Please make sure that during the creation of OCD, 'Make text anchor in paragraph source' is checked in the Table of contents dialog box. This option is necessarily be checked when creating the TOC to make OCD clickable links in EPUB documents and publish online.

  And for the hyperlink to page iv, it seems that you have an empty frame on an entire page that is above that block of text in the click event handler then not sent to hyperlink hyperlink. In the case of text hyperlinks make sure there are no objects that overlap on.

  Thank you

  -Anshul

• I can't get the page numbers in my table of contents to update when I update the book.

  
  I use Framemaker 11 and I have two tables of contents in my book: one in English and French. Each table of contents to links to various documents in the same book. The reference page for each table of contents is defined and properly displays the positions 1 and 2, I said that it appears, but numbers not updated when the contents of my document files change to another page. I checked the settings of conditional text in my document files; they are correct. When I update the book, I choose to update the numbers, all the cross-references, all text inserts, OLE links, generate a Table of contents, lists, and indexes. What I am doing wrong? Thank you.

  If they are not knocked down, then they are certainly not generated files. See the example in the help of FM11: http://help.adobe.com/en_US/FrameMaker/11.0/Using/images/bk_hier_books.png

  The 'K' is a TOC file that FM recognizes a generated file.

  Because you have created your table of the contents of the French with the help of another structure of the book, you could import reference this TOC file in another file of FM (for example to create an inset text) in the main book you want. However, you need to make updates in two steps. First update the French book to revise the table of contents. Then update the main book to get the rest of the correct pages (and given that the table of french contents are imported by reference, FM always uses the most recent version).

• Table of contents disorder

  Hello

  Can someone help me with this problem? I have a table of contents set up here, but subtitles are displayed above instead of below chapter headings.

  I gave them the subtitles appropriate levels-Units (level1), Chapters (level2), (niveau3). So I don't know why they are appearing in the wrong order. For example, 4.1 should be good under Chapter 4 before 4.2.

  Please advise,

  Thank you!

  

  FAKE ads are built pages from the top left corner and down before going to the right, so this kind of problem is generally the result of how the paragraphs are organized on the page your void topics are more to the left than the main titles.

• Entry entry not added to the automatically generated table of contents

  Using RoboHelp HTML 11.

  I'm linking a Word document into my project and have it automatically create the Table of contents. I create new pages from the Word title 1 and title 2.

  As a general rule, a section in Word will be like this:

  Heading 1

  Body

  Section 1.1

  Body

  Section 1.2

  Body

  In the table of contents, it will create a book labeled "Heading 1" and pages for 1.1 and 1.2 position position. There is no page for heading 1 or the body of the text that goes there.

  I can manually add the title page 1 of the book, but I suspect that I don't have to. Y at - it a setting I use wrong? Or a tip or solution?

  
  Thank you.

  -Shawn

  If you click on the book for heading 1, it go to the right place and show the body of the text?

  Separate headings are created for heading 1, section 1.1. etc., or is - this a topic with the table of contents goes to the required place?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge