Table of contents displays the wrong fonts... Sometimes

Similar Questions

• Character palette displays the wrong font size

  I work with a card that has been created with GIS mapping software. For some reason, the sizes are wrong in the character palette. For example, type that is actually 5.56pt is show as .7pt

  If I reset the palette of characters, the size of the fonts and characters back by default (enchantress 12pt), but the size is in reality much larger than 12pt. There must be another place where the type is currently scaling, but I can't find it anywhere. Any help would be greatly appreciated.

  To make matters worse, if I copy the text to a new text box, type return to its correct size. It's clearly something to do with the box that contains. I'd rather not have to replace every occurrence of the text, because they are too many and placement is critcal in map data.

  Also, to clarify, I can say, the text block has not been weighed and both horizontal and vertical scale are 100%

  If it comes out of ArcMap then the best thing to do is to select all and any click using the arrows to the left and then click the right move.

• Firefox 5 displays the right fonts only in Mode safe!

  After upgrading to Firefox 5, I noticed it displays the wrong fonts (larger than they should - they look ok in Firefox 4.x, Chrome, Opera).

  The strange thing is that if I run Firefox 5 Mode without failure, it displays it correctly. I have disabled all addons, I cleaned all Cache, configuration of the size of minimum font... even reinstalled. It is allowed only in Mode safe looking.

  What else to do?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  Try to turn some of the prefs Boolean gfx.font_rendering on the topic: configuration page to disable some features.
  
  Filter: gfx

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• Why does my merged project display 2 table of contents for the first project/start?

  I use RH8 and windows 7 and generate Webhelp

  When I generate my merged project I get 2 table of contents of the first project. When I click on other merged projects disappears from the table of contents 2^nd and all is well.

  Also, I can't return to my first / start window.

  Here is what I created:

  Main folder

  Parent

  Children

  Project 1 (this is my start/welcome page)

  Project 2

  Project 3

  Project 4

  My Parent file in the table of contents contains new projects and looks like this:

  Project 1

  Project 2

  Project 3

  Project 4

  The only section in the parent file is empty and I put in the following redirection according to the instructions on the site grainge:

  "< meta http-equiv ="refresh"content="0;url=./mergedprojects/project1/project1.htm "/ >

  How stop the TOC 2 on the first page of the project start and how do I display so I can access it later.

  Any help is appreciated.

  Pat

  The start page is not a topic. This is what opens the three components and the topic you see in that is the default theme.

  By default, HR takes the name of your project and which initially applies the page so if your project is called redrabbit, the start page will be redrabbit.htm.

  Many authors can call the redrabbit of the theme by default as it is the name of the project and it seems logical.

  Problem is when the wizard attempts to use it as the default value for the start page, the name is used for the number 1 is added.

  This means that you end up with redrabbit and redrabbit1. If you look in the wizard, you will see the name of the start page, first on the ground. You do not redirect, that redirect you to the default topic that is longer than down in the page of the wizard. The index is that the field is called the default theme.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• How can I display the table of contents for the iPod Touch to 6

  When I opened first of all iPod Touch Users' Guide, I used the table of contents (TOC) to locate and access sections in the manual. But, after looking through the manual for awhile, I tried to return to the table of contents, but it wasn't there! I have tried various things to see if the table of contents are being hidden, or if in some way, it has been deleted. Anyone can shed light on this mysterious event?

  What is the version of iBooks that you speak? There is an online version here: https://help.apple.com/ipod-touch/9/ Aha, I see the table of contents on the left disappears if you zoom before or make the narrow window and reappears if zoom you out or make it larger.

  TT2

• Table of contents displays a mess

  I created and generated a Table of contents and I'm having a weird problem.   He is a 19-page document and Table of contents is set up to display items 1 and 2.  Everything went well, except that to the a page Heading 1 on top of the page opens in the Table of contents under the heading level 1 below - i.e., they are in the wrong order!

  Yes, on the page.

  Text 9

  Text 10

  But he returned on the Table of contents.

  Text 10

  Text 9

  Any ideas on why it would do that?

  9 and 10 numbers page, or numbered paragraphs?

  TOC paragraphs in psotion on the page, then the things that are more left get picked up before things that are less advantage, if that makes sense.

• Indented in the table of contents is not retained in the table of contents of the document

  Hi all

  I use RH7 on a Windows XP Professional platform.

  I am generating documentation and indentation in the table of contents generated in the document is not the same, not even close, as the project.

  I tried to use HTML heading levels maintain checkbox, but while titles fonts are better, indentation in the table of contents for the document is getting worse.

  When I disable this checkbox, it will give me a decent indentation in the table of contents, however the fonts used for headings in the document are sometimes more small then one used for normal text.

  Does anyone has an idea how I could fix it? I don't want to do too much formatting in the Word document either, because it takes a long time.

  Thank you

  Thus in the document that you want to book either title 1 and 2 book 2 and in the table of contents you want this?

  

  As you can see, this is what I have in the TOC and the body is as described above.

  If you select HTML to maintain levels, you will always get the above with the titles of books but third topic will become a heading 1, as it should with this option checked.

  I maps to a Word template where the TOC styles are defined to be indented as above. Maybe you have to match to a Word template, or if you are, you just need to tweek styles in it.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• How hide the table of contents in the body of an e-book?

  Hey people, I'm kind of a weird request. Do not forget that everything I know about InDesign, I taught myself for a month, so I can miss major somethng.

  As an intern, I am creating ebooks and I have to make sure that those I create the same look as the ebooks previously created for my employer (better yet, I had to do it from scratch!). In their previous ebooks (EPUB file format) the table of contents posted by the ereader clearly indicates a specific style of OCD was used to create (he titles and subtitles, so it is not just the default style that draws from the file names), BUT there is NO table of contents anywhere in the body of the ebook itself. There is also no blank page where a table of contents can be hidden with a hidden layer.

  I created a table of contents to match style to them, but I can't it appears in the drop-down menu Styles TOC when I go to export EPUB book file unless the document of the table of contents is also included in the book file, and as I said, I can't get the table of contents in the body of the ebook itself just in the menu that is displayed by an ereader.

  Any advice?

  Did you use dialogue style of content Table to create a new style of table of contents? If so, then the new table of contents style must appear in the drop-down list TOC Style selected in the dialog box in the Navigation options to export EPUB.

  Kind regards

  POOJA

• Add text to the table of contents or the skin

  Hello

  I want to add text to the table of contents that shows all the time (is not clickable).  Is it possible to display some text of infomration on the bar of navigation/table of contents?

  Or is it possible to add it to a skin it will appear at the bottom of the screen?

  Any help would be appreciated.

  Thank you!

  Hi Julie,.

  You can try the project--> TOC--> Info it will open a dialog box where you can enter information about your organization, as well as a logo.

  In addition, if you wish, you can change a TOC and their default legend items.

  To do this, close Captivate.

  Open Notepad-

  Paste below-

  [TOCStrings]

  SlideTitle = Module name

  Time = time

  Status = status

  MoreInfo = my info

  Clear = Wipe

  ClearToolTip = State of Wipe

  BookMarkToolTip = book-marking

  NoSearch = String not found

  CurrTime = what

  ---------------------------------------

  Save it as TOCStrings.ini

  and place this file in the location of the Adobe Captivate installation on your machine.

  Now launch and add a table of contents to the Porject and preview or publish and see the change.

  Thank you

  Anjaneai

• Table of contents for the issue of the ePub

  InDesign CS5; Mac OS 10.6.5

  When I export my TOC document to ePub, do not show the table of contents, only the last two pages with text and an image.

  The table of contents defined paragraph styles. I think I have my correct export settings.

  Help to isolate this problem is appreciated.

  Note: Display of other documents in the book via ePub export display correctly, although the book must refine to ePub format.

  Also, when I tried to export the entire book through the book panel, InDesign starts export, but no activity in the progress bar. I have to force quit to get out of the endless loop. Then when I restart InDesign, Untitled files begin to open, 10, 20 and so on. So, I have to manually close each file.

  I suspect that OCD is causing this issue.

  Yes, that's correct. Once I've re-recorded old files "CS" in the new version, including the file book. Everything worked well.

  And I don't mean just making a backup (thinking that will result in savings in the current version) I want to talk about a backup - as in another folder in a different location... ie you Office

• Lack of space disk or memory, cannot display the requested font. Outlook blurred fonts

  After I've been using Word and Outlook for awhile, I get the following message: there is not enough memory or disk space. Word cannot display the requested font. Once I get this error message, my fonts are truncated in Word and Outlook.

  I am running Windows Vista 64-bit Home Premium with Office 2007. I have 4 GB of RAM, with settings in automatic mode (Windows detect).

  I'm not a power user. I googled and searched Microsoft help, nothing helps.

  My brand new computer becomes almost unusable! Help, please.

  kimlife,
  Thank you for visiting the Microsoft Answers community forum.

  There are a few things that can cause this.  One is a damaged normal.dot template, one is a damaged printer driver, and the other would be a sort of third part add in.  Start with the simplest to try so that replaces the normal.dot template.

  Click Start, click search, and in the search for box, type normal.dot.  There should be a search option you can check "Search hidden files", which is checked.  If it does not, try searching * .dot.  It can be difficult to find because it is a hidden file.  You may have to go into options files and make sure that 'show hidden files' are ticked.  Whenever you find the normal.dot file, rename the old.dot and restart your computer.  Open Word and it will create a new normal.dot template, which is what Word uses as a document is empty by default.

  If this does not work, read this article about a third-party add-in that can cause this problem:
  http://support.Microsoft.com/kb/906899

  Let us know how it works and if you need additional assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update multiple tables of contents in the same doc...

  Hello

  Here is the code I tried to write:

  myDoc var = app.activeDocument;

  var myTocStyles = myDoc.tocStyles;

  var myTocNumber = myTocStyles.length;

  for (i = myTocNumber.length; i > = 1; i ++) {}

  myDoc.createTOC (TOCStyle [i], true);

  }

  Of course, it does not work!

  What I'll try (want) to do is updated all the tables of contents in the doc.

  Thank you for your wise ideas!

  You are nearby.

  Check your syntax "for".

  for (var i = 0; i)

  myDoc.createTOC (myTocStyles [i], true);

  }

• How insert/edit a table of contents in the Bookmap?

  Hi all

  I am quite puzzled, how to use a bookmap to create a full PDF with table of contents to FM9? Everyone (well almost...) wants to OCD but I found nothing in the help and did not try it myself. It seems that I would need to insert a table of contents in the frontmatter section.

  Please excuse if there is already a thread, a link would be useful I have search but can't find this problem in the forum. Maybe it's so simple that I'm the only guy to have problems.

  I also read in FM10 help but found nothing there either. All information is available from adobe at all? Update to FM10 would be an option if needed.

  Hi Robert...

  FM-DITA (any version) does not support the automatic generation of a table of contents, Index, etc. a bookmap book lists entry. To create a generated list, you must manually add this element in the generated directory file and regenerate your book. You'll want to do it anyway so that you can assign paging and numbering and apply special models. This procedure is still the best way to manage the map of generating the address of the DITA standard FM...

  http://KB.leximation.com/DFM/?kbid=4

  Other hand (here is the sales pitch)... If you use DITA-FMx, it is provided automatically. Once you have set up the INI file of book-building with the properties and characteristics in the book, lists of books that add you to the bookmap will become good listings and all your pagination and numbering is applied correctly (in addition to loads of other features).

  http://leximation.com/DITA-FMX/

  See you soon!

  .. .Scott

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• Several table of contents in the document

  Hello

  I'm new in the FM8. I recently received a document FM8. The structure of the document is:

  Each document file corresponds to a chapter. Each chapter has a table of contents for its secondary headings and paragraphs.

  Table of contents (here is the chapter of 1 to 10, that chapters)

  Is then Chapter 1 includes a table of contents with all subtitles and paragraphs (for example 1.1, 1.1.1 and so on)

  Chapter 2-10 similarly.

  This isn't everything.

  Chapter 7, 8, 9 and 10 are placed in different folders, corresponding with the title of chapters. The rest of them (Chapter 1 to 6) are placed in the same folder.

  For chapters 7, 8, 9 and 10, I managed to update the second table of contents (which contains subtitles and subsections - for example 1.1, 1.1.1 etc..)

  There is in the main folder that contains the rest of the chapters of the files of table of contents for the main Table of contents and the contents of subeahds and paragraohs corresponding to each chapter. Here, I have problems with their updated because when I opened the book and update only the main table of contents will be updated. The problem appears when I create a PDF file. Because after the creation of PDF when I click on a chapter name in the table of contents it will bring me to the chapter I want to but when I click on the table of contents for subtitles/paragraphs that has nothing happened, except for chapters 7, 8, 9 and 10.

  So, to be more explicit.

  When I click on Chapter 7 in format pdf, acrobat will send me to Chapter 7 where I find another OCD where if I click subead 7.3 that he send me to the page that includes the chapter 7.3. On the contrary if I click on Chapter 4 it will bring me to the page corresponding to Chapter 4, but if I click subtitle 4.3 that nothing will happen.

  I will attach an example of this PDF.

  The structure of the file looks like this:

  Chapter 7 the folder:

  -Book

  -The TOC file Chapter 7

  -Chapter 7 (same goes for Chapter 8, 9 and 10)

  The project folder

  -Book (it contains all files from Chapter 1 to 10)

  -File table of contents (the main table of contents)

  -Files table of contents of the chapters

  -files of the chapters

  Thank you. Any help will be appreciated.

  Excuse my poor English writing.

  Yours trully,

  Fagaras Codrut Sebastian

  It is characteristic: chapter TOC in Toolbox for X of FrameMaker.

  Now, the Toolbox for FrameMaker 7.0, 7.1, 7.2, 8.0, 9.0 download becomes available: www.toolboxforme.com/downloads

  There are purchase orders: for us alone, Germany and other countries: http://www.squidds.de/en/products/price-lists.html
  Please fill.  If you need the previous version of the Toolbox (6, 7, 8), then please write a note in the note field.

  -George

• Table of contents of the printed Documentation

  How can I specify the location of the table of contents in the printed documentation? I would like it to appear after the title page, but it still appears before her.

  It's true. The title page which is created by the printed documentation is a default start page that you have little control over. If you imported a word document that already contains a title page that does not appear before the table of contents because the HR doesn't recognize it as such. Those of us who create print usually do as you describe. We create a generic title page that is stored in a separate word file. Then we generate the output and copy the frontispiece. You need to remove the title page of the printed good documentation process, otherwise you'll end up with both of them! I hope this helps.