Table of eol worksheet

Similar Questions

• loop for doesn't loop in table built from worksheet

  I'm probably doing sonthing but really stupid...

  first I build and table of data in a worksheet (RefLookup)

  the spreadsheet contains 3 rows above the row is my label (getting by)

  the second row it my face value

  the third row is my minimum value.

  REF is my live stream of data to be searched.

  then, I put this in a loop for loop through the table until she finds that go the Ref data in the lie...

  Then I just stop the loop and the index of output value.

  This index value is the opportunity to review worksheet data and return the label for this index.

  from what I can understand the code should... work. but it does not go past the first itteration of the loop for

  any ideas?

  Please and thank you

  John

  You must set the comma separator, otherwise you get all the data. (read spreadsheet)

  You do this too complicated. Here is the equivalent code. I don't know that it can be much more simplified!

  You don't need the outside while loop. find once is enough.

  

  You probably want to add a "select" after the loop that selects NaN instead of the last value if nothing is found, based on the Boolean value.

• table 3D chain worksheet

  I need a string of spreadsheet, eliminating all [x, 0, 0] lines.

  Lesterino wrote:

  as you can see in test3.vi block diagram:

  The entrance is a 3D Board,

  output is a string of spreadsheet

  Dear Lesterino,

  you have three entries on your 'concatenate the strings"between the shift registers. Change their order: the first entry for the second entry. Then new data is pasted at the end of the shift register data. If you need an order reverese of the chain (as it is now), you have to rearrange the entries on your 'Concatenate Strings": 1. the supply line 2. the new string data 3. the work of register data.

  See you soon,.

• Export tables to a (csv) several worksheets in a workbook

  Hello
  I have a script for users of the audit and parameters and so far I have exported arrays of different csv files.
  Is it possible to export, for example, two tables for two worksheet to a csv file?
  
  Thank you! :)

  Hello
  A CSV in not an excel document - it can be opened as is it it an Excel but there is no way to convert a .csv into a multi spreadsheet file.

  You need a tool that can wtire this natively do this or something or some vba within excel to extract the data and fill several sheets?

  Kind regards
  Harry

• How to reference cells other cells in a different worksheet?

  OK, so here is my problem. On sheet 1, I have a table similar to the one below. It contains thousands of names, telephone numbers, emails, etc...

  Name	E-mail
  John	[email protected]
  Mary	[email protected]
  Roger	[email protected]

  On the sheet 2 to my table looks like this:

  Name	E-mail

  I goal is to have the automatic filling of electronic mail, if I had to type a name on sheet 1.  How to do this, and it is even possible.

  Thanks for any advice, because I am an extreme novice.

  Hi Joey,

  

  I created the tables on the same sheet. You can cut and paste the 'Customer' table to another worksheet.

  Formula in B2 of the 'customer '.

  = VLOOKUP($a2,contacts::$A:$D,2,0)

  Formula C2 (if you wish)

  = VLOOKUP($a2,contacts::$A:$D,3,0)

  Formula in D2

  = VLOOKUP($a2,contacts::$A:$D,4,0)

  Type = in any cell to start the formula and bring up the browser functions. Type the VLOOKUP function to see how to use the VLOOKUP function:

  The VLOOKUP function returns a value from a collection of columns using the values in the left column to choose a line and column number to select a column in the same row.

  • VLOOKUP (for research, range of columns, column back, closing-match)
    • search for: the value to search for. Research-valuecan contain any value.
    • columns-range: a collection of cells. range columns must contain a reference to a single range of cells, which can contain any values.
    • return-column: a numeric value that specifies the number of the column of the cell where to return the value. The left in the collection column is column 1.
    • closing-match: a modal value that determines if an exact match is required.
      • close match (TRUE, 1, or omitted): If there is no exact match, select the line with the largest value of the left column that is less than or equal to the search value. If you use a close match, you cannot use wildcards in the search for.
      • exact match (FALSE or 0): If there is no exact match, returns an error. If you use the exact match, you can use wildcards in the search to.

  Notes

  • VLOOKUP compares a value to search for values in the column on the left of a specified collection. If an exact match is required, the line containing the largest value of the left column that is less than or equal to the search value is selected. Then, the value of the specified column in the same row is returned by the function. If an exact match is required, and none of the left column values match the value of the research, the function returns an error.

  Kind regards

  Ian.

• Table set in place to achieve separate Colomns

  How do you organize a table so that when it is opened in a spreadsheet, each value will be in a different column.  Currently have 8 'signals' incoming ' filter component Y ' enter 'build array' entering 'table in chain worksheet' with formatting % .3f.  So between a string of concanteneted so that I can add the date and time.  After that, sinking a string in the "write file".  Sorry if it's too much info, but I just want to know what I have to make adjustments.

  Thank you.

  For the "write to the spreadsheet file", there is an entry for "file path".

  If you do not connect no matter what (that you did not) it will ask for a file.

  Since you put this function in a loop, it continually will inspire you, which as you can see getting very annoying

  Right-click on the entry for 'file path' and click on ' create > control '.

  Then right-click on the control and go to "visible elements > Browse '."

  Then, you can browse a path.

  

  As for the rest of your code, I have a feeling that you get only one point at a time.

  Can you please attach your actual VI file to this topic?

  You need to create 8 shift registers.

  Use the function 'build array' to add the value y of each waveform to its respective displacement register.

  In the end, build a 2D of each table 1 d.
  Then pass this 2D array to the function "write in the spreadsheet file.

  Please let me know if I'm not explain well.

• Sending to values in a table when a record is

  Hello

  I display the elapsed time on the display panel.  I also have a button 'save' on the Panel and I want to take the current elapsed time value and write them on a spreadsheet.  Currently my code runs the elapsed time and resets to zero when I press record, but it records each unique value and crashes.

  You need to set up a registry to offset instead of your tunnel you currently have.  What happens when you press stop, it takes the last value he saw for your elapsed time and recording time data and puts in your worksheet.  Just put a shift register and a generation array that has an entry like the current data and the following entry as the new data.  You need to do this for each of your records that will change during a race.

  Also why did you build in a table before the worksheet?  I think you can concatenate the strings instead.

• Conversion of SQL worksheet.

  Hello
  
  If I sent someone a microsoft excel spreadsheet, the chances that you would be able to convert in SQL if I named a few tables and columns that were to be used are there?
  
  Please let me know,
  
  Thank you SM.

  If your excel workbook is formatted so that you have a 'table' by the worksheet contained in it and the first row on the worksheet defines column names and the following lines are the data, then you can treat the workbook as an external database using the ODBC Excel driver.

  Set up:

  1- Go to Control Panel>Administrative Tools>Data Sources (ODBC)>System DSN and create a data source with appropriate driver. Name it EXCL. 
  
  2- In %ORACLE_HOME%\Network\Admin\Tnsnames.ora fie add entry:
  
  EXCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 10.12.0.24)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = EXCL)
  )
  (HS = OK)
  )
  
  Here SID is the name of data source that you have just created.
  
  3- In %ORACLE_HOME%\Network\Admin\Listener.ora file add:
  
  (SID_DESC =
  (PROGRAM = hsodbc)
  (SID_NAME = )
  (ORACLE_HOME = )
  )
  
  under SID_LIST_LISTENER like:
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = d:\ORA9DB)
  (PROGRAM = extproc)
  )
  (SID_DESC =
  (GLOBAL_DBNAME = ORA9DB)
  (ORACLE_HOME = d:\ORA9DB)
  (SID_NAME = ORA9DB)
  )
  (SID_DESC =
  (PROGRAM = hsodbc)
  (SID_NAME = EXCL)
  (ORACLE_HOME = D:\ora9db)
  ) ) 
  
  Dont forget to reload the listener 
  
  c:\> lsnrctl reload
  
  4- In %ORACLE_HOME%\hs\admin create init.ora. For our sid EXCL we create file initexcl.ora.
  
  In this file set following two parameters:
  
  HS_FDS_CONNECT_INFO = excl
  HS_FDS_TRACE_LEVEL = 0
  
  5- Now connect to Oracle database and create database link with following command:
  
  SQL> CREATE DATABASE LINK excl
  2 USING 'excl'
  3 /
  
  Database link created.
  
  Now you can perform query against this database like you would for any remote database.
  SQL> SELECT table_name FROM all_tables@excl;
  
  TABLE_NAME
  ------------------------------
  DEPT
  EMP
  

  Or refer to this Article...
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4406709207206

• Need help to load the data from the Excel data to oracle tables

  I need to load an Excel worksheet to the Oracle table.
  
  The worksheet contains 20 columns, the first 8 columns contains basic information, but the rest 12 columns contains info like
  1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
  1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
  1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
  
  So what I have to do is:
  
  break only one record (with 20 fields) in Excel to 3 files for each fiscal year in the Oracle table for each record in the database table will look like
  
  8 base field + fiscal_year + 1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
  8 base field + fiscal_year + 1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
  8 base field + fiscal_year + 1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
  
  There are about 10000 rows in the data file, so how can I use sqlldr to perform this task? beside sqlldr, other good suggestions?
  
  THX

  External tables is just an API Oracle sqlloader. If you are about to load this data over and over again, the external tables would be a good idea, but if it's a one time thing, sqlldir is more simple, unless you want to just learn to use external Tables.

  I used to run a data warehouse, so I did it, the less similar to what you do in the past.

• create Pages with editable cells form

  In the Pages have need create an order form 6 columns to send to clients on different platforms, with ONLY an editable column, the rest of the locked/protected form!

  Must keep the formatting when exporting to other formats, including PDFs.

  (probably not the first time someone got this case.)

  On iMac using Pages in iCloud.

  (In past I have used numbers but cannot export multiple form of numbers table as treats each separate table as the worksheet)

  Pages only works on selected versions of OS x and iOS, you can not do purchase orders for users on "multiple platforms".

  Pages retains its formatting so printed or exported to pdf, but you need to add the possibility of forms in Acrobat Pro.

  Peter

• Index and MATCH with several conditions

  Hi all! I hope I can explain what I'm trying to do here clearly. This is my first shot:

  In the table below "Office entry Worksheet - area 1" I am trying to insert a formula in column B which will result in an answer ' true / false ' and be used for conditional highlighting

  

  The first condition that must be met is that the checkbox in the table "Labor and material Checklist" column A or check, if it is not checked, then move to the next line. If the box is checked, then the following condition would need to index and match with column C of table "Office entry Worksheet - area 1" in column B. If there is a match in column C, then move to the next line of column B in the table 'labor and material Checklist '. This continues until there is a 'match', then highlight column B in the table "entry Office sheet - surface 1" in red (or something like "MISSING task")

  It is an estimate and the idea is to ensure that the Phases that are checked in the table "Labor and material Checklist" will not miss when you use the table "entry office map - zone 1".

  Thank you very much for your help!

  Tim

  

  Is it possible that I can download this spreadsheet file?

• Do the numbers tell me the last date of a cell containing specific text

  Hi guys,.

  I'm setting up a pilot logbook and I need to keep track of when I lead some approaches to the instruments for the purposes of recency.

  For example, the last time I did a VOR approach was April 20, 16.  I need the numbers to recognize the "VOR" text and give me the corresponding date.  I'm having numbers give me this date in a separate table.

  Any ideas on how to do this would be greatly appreciated.

  

  Thank you!

  Hi Walter,

  This is a roundabout way. Perhaps another user will display a more elegant way.

  

  Table 1 is a version abridged your journal of driving. Here is table 2:

  

  Table 2 uses the SIERREUR function to place "" (NULL) if the SEARCH fails to find a match between the value in the header line and an entry in the log of your flight.

  Otherwise, it inserts a value (The FIND returns the starting position of a string in another).

  Now we've found BK VOR (and fill to the right) and SID.

  Columns needed for approaches more more!

  

  Table 3 is a Date of any cell in table 2 which is not "" (NULL).

  Formula in A2 (and fill down and fill the right)

  = IF(Table 2::A2≠"",Table 1::$A2,"")

  You can type this than = IF (table 2::A2 <>"", Table 1: $A2, "")

  3 numbers will change <>≠

  Formula of the cell footer of table 3 (for column A, then fill to the right)

  = MAX (A)

  To improve the 'presentation', move (copy / paste) 2 Table to another worksheet (TAB). The formulas will adjust automatically.

  

  Happy flying!

  Kind regards

  Ian.

• Numbers for iPad "Add form" do not always show

  OK, I am trying to create a spreadsheet. I know that number for Mac, it does not support the ability to "create a form", but when I open a file on my iPad, some spreadsheets allow "add form", some not.  I would really like to be able to "Add form" to my spreadsheet in my iPad.

  Anyone know how I can create a worksheet and still keep the ability to 'Add a form' for my iPad?  I guess it's a matter of version, but am confused when some of my files can still do it, and some can't?

  I hope I made sense there.

  Hi MacMovieMan,

  If you don't have a heading row in a table in your worksheet, you will not be offered the creation of a new form option. What is happening in your worksheet?

  Quinn

• How to add a value to a column of a string of pop up

  I am really inexperienced with spreadsheets, but asked me to help create a timesheet for a rotational system.

  I know that the time could be manually entered and calculated in duration but as there are only four options, let's say A, B, C travel and OFF, it would save a lot of time if there is a pop-up menu along side each name and under every day so that when a change is selected, the corresponding hours would be added in the total column.

  I actually created the spreadsheet with context menus as follows:

  08:00 - 15:00

  15:00 - 22:00

  Off

  08:00 - 18:00

  The reason why the 08:00 - 18:00 is in the end, it is a special change that only supervisors do.

  In any case, is there a way that these string values can be converted to hours to a total of column? I tried, very awkwardly, and I can't really follow the logic of the formulas of the numbers so I would be very grateful if someone could help me.

  I've included a selective screenshot in case my description is not very clear; Thank you.

  

  Hello Alf,

  The key to this is to use a lookup table for the transit time of list (as in your Menus pop up) and the number of normal hours for this position.

  Note this column of the table must match exactly to your Menus pop up (I added spaces on both sides of the hyphen).

  

  Then another table (hours) to account for the infeed Table and convert shifts in hours.

  Formula in B2 of table of the hours (and fill right and fill down)

  = INDEX (Lookup::$B,MATCH(Input::B2,Lookup::$A,0))

  My cheat for the combination of the INDEX sheet and MATCH:

  = INDEX (column, I want a value returned by,)

  MATCH (the value of my choice,

  Column, I want to search against.

  Enter ""0")).

  Finally, the formula in the column "hours worked" (right part of the input table)

  

  I2 = SUM (Hours::2:2)

  And fill down.

  Kind regards

  Ian.

  Edit: You can move (copy / paste) the table and the table to another worksheet hours to 'hide '. Ian.

• Database Connectivity Toolkit (insert multi line)

  Hi all. I recently got the toolkit of connectivity (DBCT) database on LabVIEW 2016 and I try to insert several rows in a database.

  Using a sine signal input I tried to insert 50 rows in an iteration, but each method I tried returned 50 values in a line. The end of the constant of the line and table using chain worksheet, returned what looked like 50 lines, but when I questioned "SELECT COUNT (*) FROM... "the number of rows equals the number of iterations.

  On another post on the forum, someone suggested that it is not possible to insert several lines using the DBCT. Can anyone confirm this?

  I wrote a code that allows me to insert 3 rows in an iteration, under a single connection. However, this method is very time consuming and would not work for large amounts of data.

  

  Can anyone think of a better way to do it?

  Thanks in advance,

  Lisa

  Create your own query, and use the query execute VI.