Table of indicators

Similar Questions

• Table of indicators clusters

  Hello world

  In my program, I have an array of clusters with controls and an array of clusters with indicators.  I created nodes of property for each table that updates the number of columns.  Each column represents a channel that is monitored on a DMM scanning.    My program works as I want to, with the exception of the battery of indicators.

  I have a VI sub which checks the value measured by the DMM and determines if the device measured by the channel complied or not.  In a cluster of indicators, I have three indicators: one for the measured current, one for the time elapsed and a boolean that indicates if the device has reached a limit.  The problem is that on the screen, I don't see the values entered in any of these indicators?  I'm newish to the use of tables of clusters and which do not.  Can someone please help me to see what I'm missing?

  I have attached my Subvi (LabVIEW 2015).  I know that nothing is connected to the elapsed time indicator.  I'll go to that in a bit.

  Thank you.

  What indicators are not see all values on? The Output channel indicator shows correctly it seems. Output display will always be no element in the table because you start at zero and then use the Replace table VI subset to add items. This will not work because if your table has a size zero, there is no element to replace. You can use an array to initialize (initially to match the size of the array strings) or use a different method of the edition of the scoreboard.

  Edit: I just noticed you do not use a very useful tool with loops: automatic indexation. This is something short of those. You can get rid of your shift registers and table manipulate nodes.

• Initialize table?

  Buenas, Porque El preguntaros first not be muestran Los Datos En El 'output array. Bij appear same Los problemas "tabla iter."

  No "constant matriz" TR Es Por if, as services can?

  Of Cuando solucione preguntare ESTO Algo mas Complejo os.

  Gracias Por adelantado

  Hi pescajaime,

  The VI "Insert table" inserts a table n-1 dim in a table of size n to the specified index. In the attached screenshots I guess that a constant variety of dimension 2 is connected to the entry of the "insert in Array. I also assume that you do that add items to the first column of this table of 2 size (what is more, I guess you just add a 1 element at index 0.0 this table). If this is the case, you can only insert an array of 1 dimension for the first column of table 2 original size.

  Therefore, when you cable the output array of the VI that is associated with the HS1560 device for the "new item/sub-table" entry "Insert table", VI this VI is just the first line insertion of the 2 dimension table. I guess that the specified index is 0 (0 times 5 is equal to 0), so LabVIEW is the first line of the 2 array dimension inserting this device ouptus the 'HS1560' in the first column of the original array. If you compare "output table" and "Tabla iter" indicators you can check that the first column of the "iter Table" has been added to the first column of the table of origin at index 0. Since this column caontains 11 loose, a '1' is located in the 12th position of the column. The attached extract shows this behavior.

  To insert the entire table of dimension 2 'Table iter' in the constant table, you add to the table constant as many elements as the number of lines containing 'Table iter. "

  I hope this helps.

• create table of references to the elements of the array to another

  I was trained by support OR read an array of image files in a table of indicators of the photo and then in order to save memory, establish a table of references in the table of elements "indicators photo so that I can use them in a subsequent loop."    Does anyone know a quick way to create this array of references to a table of indicators of the photo?

  That's what I think is meant by this recommendation, but it was written improperly.  I needed another view of people to him and got him - Thx

• Flicker in scorecard views

  Hello, I have a program to display tables of data strings in the table of indicators with 34 rows and 2 columns. I have revised the program adds a function to sort for displays and I noticed that indicators table sparkle. The display name and string numberical flickers power on and off and this twinkling scrolls to the bottom of the table top to bottom and then rehearsals. I tried to fix this, but without success. Even if I remove all revisions, I did the flickering remains. However, I kept the old version of the program and indicators table twinkle not in this version. It seems that editing the program causes this effect even if I take the revisions. I do not see the flicker if I create an array of strings by inserting an indicator of the string of the function table 1 d and then change of dimension 2. The data is displayed with the flicker. Operators are used to seeing the flag Bulletin Board, so I ask for help to solve this problem. I've seen this problem before with indicators of table flicker but do not know how to fix it. I tried to increase the period of update for the display of 100 ms for 1000 ms, but this does not solve the problem. Also, I tried to replace with a new scoreboard in the function palette but still get flicker. Any suggestion would be appreciated.

  I have the answer to your problem, but you probably won't believe me until you try it.

  Long story short - any table, falters, no matter how often or rarely update you data at its terminal.  Even if new data are unchanged, you will get the flicker.  As to how that redraws the façade of the tables is something changed LabVIEW 8.0 to 8.2.

  Take a decoration (I usually get a small flat square), drop it in front of your table, while she rides one any part.  Run your VI.  You will notice that the flicker goes away.  Now go back and resize the decoration is only a few pixels in size and drag it to the unused corner space in the upper left of your table.  Now take your brush and the decoration of transparent color.  Run your VI and note the flicker went still.

  Something to have another visual element in front of the table (same one that is totally transparent) removes the flicker, but I suppose that there are only four or five software engineers OR which might give you the reason why.

  I always put the deco in small space just left corner if I can find it again, I should never need to.  Doesn't really matter where it is.

  Best regards

  Dave

• too long paths for indicator

  I'm simply creating a Picker dialog of files in which I select many files in different directories and then finally hit a button of files to analyze.  The problem that is not an apparent solution is my paths are long and after that I selected the with the express VI, I accumulate then them in a table of paths that can be displayed.  This table of indicators of paths is sometimes too small in width and I don't see a way to easily encapsulate and autosize the indicator so that the user can see the entire path.  Is there a known way to solve this problem all over the world?

  Without much thought in it, perhaps you fill the table (of paths), you can write to ownership of the indicators advanced Strip?

  

• Creation of control array

  Hello

  I wish that my VI to create an array of controls that can be operated by the front panel. In other words, I have an integer that specifies the amount of controls that I need. Then I would that my VI to automatically create a table of Boolean controls that I can't change the façade. I can create the table of indicators, but unfortunately, the behaviour(control/indicator) of the elements on the inside seems to be related to the behavior of the table.

  Thanks in advance

  You can create an array of references to controls that already exist.  Hide/show controls that your choice by indexing the table and passing the reference for each control to a property node.

  I don't think it's possible to create/destroy the controls during execution.

• Primary key on the attributes of data type

  Production data Modeler 3.0 is really nice! Kudos to the development team.
  
  Now for a question. Any idea when the Data Modeler will support (generate after modeling) the following SQL statements?
  
  CREATE or REPLACE TYPE x_flags_t
  AS AN OBJECT
  (
  ID NUMBER,
  has_note NUMBER,
  has_image NUMBER,
  created_on DATE,
  created_by VARCHAR2 (30 CHAR),
  modified_on DATE,
  Modified_By VARCHAR2 (30 CHAR),
  FINAL
  X_flags_t FUNCTION CONSTRUCTOR
  (
  GITES x_flags_t IN OUT NOCOPY
  )
  RETURN SELF AS RESULT
  ,
  FUNCTION MEMBER update_row
  (
  X_flags_t COTTAGES
  )
  RETURN x_flags_t,
  FUNCTION MEMBER update_note_flag
  (
  X_flags_t COTTAGES
  p_note_flag in NUMBERS
  )
  RETURN x_flags_t
  ) NOT FINAL
  ;
  /
  
  
  CREATE TABLE x_flags
  (
  indicators x_flags_t
  )
  /
  
  ALTER TABLE x_flags
  ADD (CONSTRAINT x_flags_pk PRIMARY KEY * (flags.id)) *.
  /

  Hi Scott,.

  Thanks for your comments.
  I logged an enhancement request to enable a primary key for a Table containing columns of structured Type to refer to attributes of structured Type.

  David

• Table of values of individual indicators

  Hello

  I read some values from an ini file using a 'loop' for. It gives me an array of values that I use throughout my program. So far so good.

  I would like to take each value in the table and view it in the various indicators on the front panel.

  I solved this by using the "cluster table", then the cluster 'ungroup' and the output of this goes to each indicator. See example attached vi.

  While this works, I was wondering if there is a more elegant solution. In my example, I use only 4 values, so the "ungroup cluster" is not very big. If I need to post say, 40 values, then this unbundle takes up three-quarters of the height of my screen!

  Any suggestions?

  Kind regards.

  Hello

  to get the values of the elements of the array using function "Array Index" of the palette of Array. Drag the top or bottom edge to add other terminals. If you leave the terminal 'index' unwired, the function returns 0, 1, 2 element... See the documentation for more details.

  There is no reason to convert the table to a cluster, and then obtain the clusters.

• When I go to the Yahoo stock charts my table settings and technical indicators are not saved. Is it possible to keep these settings, perhaps by saving cookies?

  When you open the stock charts of Yahoo, is there a way to allow Firefox to remember the changes I make when viewing stock charts, including the parameters of the chart and technical indicators? In the view of the chart Explorer comes as I left it on previous visits while Firefox deletes all changes and I have to get them whenever I revisit. In Explorer, I believe that these changes are stored in the form of cookies, but in Firefox I can't seem to find a way to resolve the problem. I got Firefox to delete cookies when leaving.

  Firefox Orange button > Options > Options

  • Privacy > history
    • Choose > history

  To learn more

  • https://support.Mozilla.org/en-us/KB/enable-and-disable-cookies-website-preferences

• Indicators in table 1 d stupid!

  Hi all. New here, quite familiar with LV, although my last serious relationship with Version 6i, 10 years ago.

  I am just familiarize themselves with 2012 and now am really frustrated. I just built a simple serial comm vi read a pressure sensor and especially it is OK, but it is a big but, if I right click on a terminal with the wiring tool and select Create indicator it gives me a table 1 d, with the top to the bottom of the arrow thing. I just want a simple digital indicator, not a 1 d table! I went to a 'Representation' and it tells me that it is a DBL, which is fine.

  Please, someone, how can I default to a simple indicator and how I do those I have since a 1 d array for change and the regular indicator.

  Sometimes, it's like banging your head against a brick wall. Please do stop!

  Thank you

  Andy

  There are a few options available to you. First of all, what format is the string that you receive? It is an ASCII representation of the hex values or is the binary equivalent of the hexagon? If it's soapy ASCII you can simply use the 'hexadecimal string to Numer"vi to convert it to a number. If this is the binary format, you can use a cast to convert data from a string to a number.

  

  Regarding the veil, I have been sailing and racing on Lake Michigan for the last 30 years. I currently have the crew on a 42 first Benneteau. We race the weekly shopping of can beer, a few weekend of racing as well as some port to which the Chicago to Mackinac Race. Nothing on the water. BTW, here is the original size of my avatar.

• Scroll the two indicators in table at the same time

  How to scroll the scroll bar of the two table flag simultaneously?

  Thanks in advance

  Try this minor mod to allow either scroll to be active - and like NIquist said-controller to the bottom of the loop

• USE OF CUSTOM WITH TABLE ALIAS IN LKM INDICATORS

  Hi all

  I'm trying to customize the allusion in my select clause on the source system. I tried the API below for table alias to analyze the alias of the indication of the Oracle table.

  Code: < % = odiRef.getSrcTablesList ("", "[POP_TAB_ALIAS]", ",", "") % >

  It is going to look all tables in the source as "TABLE1_ALIAS, TABLE2_ALIAS", my requirement is to use these aliases in the same TIME indication.

  Example: select / * + PARALLEL (TABLE1_ALIAS) PARALLEL (TABLE2_ALIAS) * / col1, col2 from TABLE1_ALIAS TABLE1, TABLE2 TABLE2_ALIAS WHERE TABLE1_ALIAS. Col1 =TABLE2_ALIAS. COL2;

  
  

  How can I generate these two table alias and generate the indicator as / * + PARALLEL (TABLE1_ALIAS) PARALLELS (TABLE2_ALIAS) * / based on the number of tables in the select statement.

  
  

  Kind regards

  Yellanki

  Hello

  First of all, could you go through your previous questions and close? Or at least, as could a matter of respect for users to take the time to respond, you give a feedback?

  Try again with

  /*+ <%=odiRef.getSrcTablesList("", "PARALLEL (", "[POP_TAB_ALIAS]", ") PARALLEL (", ")")%> */
  

  More info in the doc: http://docs.oracle.com/middleware/1213/odi/develop-km/odiref_reference.htm#ODIKD1273

  Kind regards

  JeromeFr

• Need to find all tables in the target using indicators of loading time APPEND and PARALLEL

  Nice day
  
  Value your machines Way-Back version 10.1.0.4 for a matter of scheme.
  
  I am trying to identify all the target tables that are currently defined using APPEND it and PARALLEL loading tips. This is the default setting but is not the optimal method in all cases. With several developers who have developed cards for years, most with little background or training, we try to do a bit of cleanup and optimization.
  
  With about 900 cards it is not possible to do this manually, so I was hoping that someone who has used this old version remember where this information is stored in the old structure of repository.
  
  Thank you very much!!
  
  -gary

  Start OMB * more. And then

  OMBCONNECT...
  OMBCC ' /'
  the value of mods [OMBLIST ORACLE_MODULES]
  foreach $mods {} mod
  OMBCC ' /.
  define tabs [OMBLIST TABLES]
  foreach $tabs {} tab
  puts "$tab [OMBRETRIEVE TABLE '$tab' (PARALLEL_ACCESS_MODE) GET PROPERTIES]"
  }
  playing cards [OMBLIST MAPPINGS]
  foreach map $maps {}
  Set mtabs [OMBRETRIEVE MAPPING "$map" GET of OPERATORS of TABLE]
  foreach mtab $mtabs {}
  puts "$map $mtab [PROPERTIES of OMBRETRIEVE MAPPING"$map"OPERATOR"$mtab"GET (LOADING_HINT)]"
  }
  }
  }

  Kind regards
  Jaap.

• Return the column in the dynamic table based on indicators of control with the help of EL

  10.1.3 JDEV
  ADFBC
  The ADF faces
  
  I'm looking for EL that exposes if suspicion of display of the attribute has the value "Hide".
  
  Inside a < af:table > tag I dynamically generate columns from the View object:
  
  < af:forEach elements = "#{bindings." MyView.attributeDefs}.
  var = 'def' >
  < af:column headerText = "#{bindings." MyView.labels [def.name]} ".
  sortable = "true" sortProperty = "#{def.name} '"
  rendering = "true" >
  < af:outputText value = "#{row [def.name]}" / >
  < / af:column >
  < / af:forEach >
  
  I want to hide a column if the display for the corresponding attribute flag is set to 'Hide '.
  
  I was not able to find the appropriate EL syntax to expose this property.
  
  Does anyone know a quick/easy EL expression to expose the display flag?
  
  Thanks in advance.

  Looks like it will work only in 11g.

  Here's what you can do in 10.1.3.4 I tested as working...

  Add a bean support like this helper class (I registered with the managed bean name 'Helper' in the scope.

  package extendsproject.view;
  import java.util.HashMap;
  import java.util.Map;
  import javax.faces.context.FacesContext;
  import oracle.adf.model.BindingContext;
  import oracle.adf.model.binding.DCBindingContainer;
  import oracle.jbo.AttributeDef;
  public class BackingBean {
    Map m = new HashMap() {
        public Object get(Object key) {
            if (key instanceof AttributeDef) {
                AttributeDef ad = (AttributeDef)key;
                DCBindingContainer bc = (DCBindingContainer)FacesContext.getCurrentInstance().getExternalContext().getRequestMap().get(BindingContext.RESERVED_BINDINGS);
                if (bc != null) {
                    return !"Hide".equals(ad.getUIHelper().getDisplayHint(bc.getLocaleContext()));
                }
            }
            return null;
        }
    };
    public Map getDisplayed() {
        return m;
    }
  }
  

  I have the reference in my dynamic page in the property 'made' column ike this: