table to the spell to deal structure

Similar Questions

• At all indexes on tables of the same value in the structure of the event

  Hello

  I have a panel with the four bays and I use a structure of the event.

  Now, I want that change of the index of array_1 also affects the index of 3 other tables at the same index.

  But there is only a property "value Exchange" and no property 'index-change' in the properties of the table.

  So I read the 'index' property and write in the other table.

  But: It seems as if I have to do so within the period of waiting-section of the structure of the event.

  Is there another way to do this?

  Thanks for help

  You can use the mouse event on each table to detec the event (of course, that will attract not only a change of index, but I don't think you care too) and then use the 'values of the indices' property on all the table to set.

  See annex VI (LV2012), hope this helps

• How can I connect 2D Boolean table at the entrance to the structure of the case?

  Hello

  I would like to know how to solve this problem. I try to connect the output of a digital 2D painting and a constant number of 'BIG' before you connect it to the entrance of the structure of the case. An error message appears and it shows ' the type of the source is a 2D boolean array. The sink type is Boolean "."

  I tried to 'disable indexing' on the box of the structure of the case, but the error remains. Would appreciate any comments on it.

  Entry 0 third entry in the index table, not the other.

• Copy of a table in the access only with CF query structure

  Hello
  I need to know how to create a new table by copying an existing table with the structure of the table in a query
  
  Don't know the syntax but
  
  CREATE NewTable FROM ancienne_table (structure only)
  
  Is there a way to do this in a query?
  
  Thanks in advance
  
  

  I actually worked on it. It cannot be the right answer, but it works

  
  Select * into admin_pass2 from admin_pass
  

  What makes a copy

  
  Delete * from admin_pass2
  

  This empties

• Manipulation of the table with the recurrence

  I have a 2D chart which is similar to an adjacency matrix.  The table contains information that I need to analyze following a set of simple rules, but I'm unable to implement them.  Here is a simple example of the table (I would like to get the simple example job, and then expand as needed to work with the greatest examples).  The table is a table of 6 x 6 and the columns contain information about a procedure of transition between nodes in a map.  There is a root column (column we will begin by) and there are sheet columns, columns, we strive to achieve by browsing through other nodes in the graph (other columns in the table).  In the example below there is that a single root and a leaf, root is column zero and the leaf column 6 (I chose the marking of the nodes so that the zero column would be the root and column 6 would be the leaf but it doesn't have to be the case and I'm writing the software so that it is not dependent on the labelling of the map).  Outside the entrance to 2D table, there will be an array of column headers that maps the label of node to the right column of the table, a table of leaves and a digital control for the root.  That's what I try to do, refer to the image below.

  

  I look at the root and see that this is node 1, the column header looking I see that node 1 is column zero of my table.  I start with the line 0 in column 0 (the root column) and work my way down looking for integers not dummies.  I'm a rank, then see the integer 2, that tells me that I need to move the column 1 of the table (because the column 2 header) and store the integer 2.   I start with row 0 column and work my way down looking for integers not dummies.  I just rank 2 and see integer 3, that tells me that I have to move to column 2 of the table (column 2 header 3) and store the integer 3 (while I now [1,2,3] as my path I'll build).  I start at line 0 in column 2 and work my way down looking for integers no dummies and come in the 4th row is Integer 5, it tells me that I have to move to column 4 of the table (because the column 4 has 5 header) and store the integer while I [1,2,3,5] as my way.  I start at line 0 in column four and work my way down looking for an integer not null and come 5th see 6, because integer integer 6 is my current journal (only sheet for this example) I stop and have a path from node 1 to node 6 [1,2,3,5,6].  I didn't even though (and this is the part that gives me bad) because the column 1 (node 2 header) had another line nonzero, rank 3, which contains integer 4.  I need to repeat the process from here, give me a second track of [1,2,4,5,6].

  You can see how this will get very complex when I have several columns with several lines non-zero.  This seems to be a good case for use recursion, but I can't write the code to do this.  In the end, I need to find all the ways to get from the root to the leaf, as I said that there is more than one sheet in most of the cases.  Having many Leafs should not be a problem because I can repeat the same process for each leaf.  I have attaced a VI in 8.0 which has berries that I work with, according to the picture above.  I would like ideas on how to achieve this, as I refuse to do it by hand for great examples when I should be able to easily automate this process.

  Concerning

  This version fixes two problems I mentioned - one was caused by the queues the starting point outside the loop (a legacy of my original idea), the other to not deal with the final loop iteration when there is nothing in the queue (fixed with an additional business structure).  You need is a graph (that is to say, have links back and forward)?  Otherwise you could do a little more efficient with a directed graph, by removing the link from 2 to 1, 3 and 4 to 2, etc.

• Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  Hi all

  Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

  I did program mentioned above but it does not work. Can you tell me what is the problem?

  There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

  I have attached my program with this message.

  Thank you in advance!

  (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

  (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

  (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

  (4) you need to finish the lookup table (table 3D)

• Even the number of folder Structure

  Is there a programmatic way to extract the case number of the Structure of the event indicated in [] to the left of the name?  This can be useful when debugging in which case triggered Actions for a State Machine in queue.

  Carsten Thomsen

  Here is the script for event names.  They would be in the table in the order that they are in the structure.

  

• In the use of style/Structure of the workplace guide

  A two part diagram is attached.  Half upper is in Place Structure of the element that surrounds the loop.  The lower half has in Place Structure of the element surrounding only the part of the portion of the structure of a table element that has changed.  The smaller square structure element is the only place that the elements of the array are changed.  Since I am new to the use of in Place of Structures of the item, I would like to know the pros and cons for both methods of changing data encapsulation.

  There is no advantage to the use of the Structure of the element in Place in one of these diagrams.  Try to use the tool 'Show buffer Allocations' - you should see that LabVIEW is not a copy of the cluster even without the International preliminary examination, so that the operations are already in place.

  However, you might get some performance benefits to move the "Orientation" table outside the loop for, unless you actually change it all in the for loop runs.

• Build the name of guard of the table of the last element, but not the others. Workaround solution?

  Hello

  Sorry if this has been posted before, I did the search first, but can't find anything.

  Problem is that I have two configurations which are identical and must be ordered by a single vi. Given that they are the same, they are configured with the same sets of parameters so I decided to create a cluster of these and then build an array of clusters. In this way I need to use only a thread and if I need a given parameter I can get it easily from here (or so I thought) and also because I need to see if anything changes I can compare a thread instead of each of the parameters.

  The gui has the list of parameters, then in the block diagram I group them appropiately, using "Bundle name" and then each bundle in a table by using "build the table. Problem is when I have the index in the array for the first place of the configuration and usage to unbundle the parameters I need, using "ungroup by name" (although if I use "Unbundle" the same thing happens) and lo and behol, the output names come from the configuration of the second, not the first.

  Here's the curious thing, though, even if the names are all wrong, that the values are correct. I could live with that, but it's more boring it will be another very difficult user to understand the schema more this is just a proof of principle to test with two, eventually there will be eight or more and who's going to get really confusing.

  Is there a way to get around this? Even if it is to change the names after unbundling.

  Check the attached vi to see what I mean.

  I think you forget an important point on the tables.  The only thing that may be different between each element of a table is its value.  The elements in the array must all share the same properties.  This would therefore include the names of the different elements that make up the cluster that is a table element.

  It seems that the last group that builds in the table is the one that defines the names of the items that are in the element of the cluster.  You must give all elements of the array with the same name within the cluster.  Or use a cluster of clusters rather than a table of cluster to create your data structure.

• Turn off the lines in the region of the table when the page loads in standard page using the CO Extension

  Hi all

  I have a requirement in standard page OAF, When page load I need to disable a region advanced table standard page column and if we add the new line this column must be activate.

  Please help an emergency.

  Kind regards

  Manoj Kumar belaid.

  Maury,

  You will have to go with SPEL. Create an extra in your VO and default attribute set to true.

  Use as the SPEL for the disabled/ReadOnly property of the column.

  Reference: advice of Oracle of Johny: OAF: Spel liaison

  See you soon

  AJ

• Create the form on table in the different schema

  Hi all

  in APEX I am logged in as long as user APEX_USER and the table, I'm trying to access the site with the creation on Table Wizard form belongs to the user. I have granted all privileges on a given user APEX_USER table, the wizard allows me to choose this table in the list, but when I press the next button, I get the following error message:

  You do not have access to the schema that you import. Import failed.

  Contact your administrator for the application.

  Seems to me that something similar had been already discussed here, but still no response.

  V4.1 assistants when you use a different schema

  Please, what are the rights must have my APEX_USER to be able to create forms tables belonging to someone else?

  Thank you very much

  Pavel

  Edit: I did the same thing on my laptop (APEX 4.2.6.00.03) here and it works as expected. This error I get to work with APEX 4.2.3.00.08 (of course you should not necessarily be the cause, very likely, I don't have all of the necessary privileges) :-).

  Hi Mike,.

  Thanks again for your response. If the schema was not related to my workspace, I would yet be able to choose the other schema of the selection list.

  In fact, there seems to be a bug in the link in my message original (for example it is still not fixed in version 4.2.3), but fortunately I was able to find a workaround - I created a view with the same name and the same structure as the original table, and then I was able to generate the form with the wizard , finally I gave up the display and modification of processes page manually. So the solution is I have to force the DBA APEX upgraded to the current version :-).

  Best regards

  Pavel

• Lose the vertical alignment of the table during the conversion of the ditamap to book

  FrameMaker Version: 12.0.4.445 (later part of TCS5)

  1. I have a project structured, where several XML files have been grouped in a ditamap.
  2. For one of the XML files, I have a table, where I need to set the cell Vertical alignment of cells in the MIDDLE.
  3. So using Paragraph Designer > table cell, I have change the entries in the top in the Middle (the default values have been Top).
  4. With the ditamap pane selected, I'll then menu file > > Save Ditamap under
  5. I save ditamap as ' book with fm components 12.0 (* .book) "file type.
  6. In the resulting book, the XML files are now. FM files.

  However, at this point, when I open the. File of FM which has the table, the cell styles back to the TOP.

  I searched high and low for a similar problem. It's look like a bug to me, but can someone confirm?

  Thank you

  No, this is not a bug by itself. I bet that the alignment is lost before you generate the book. After you set the alignment and saving and closing the file... reopen and see if the alignment is still there... I bet it's gone. As a general rule, you cannot apply put in shape or properties to objects (elements) in a DITA file. This applies to font and paragraph properties as well as table set in shape and other types of development in the form. All you can do is create items and set attributes. Any parameter properties will usually be lost on file save.

  You would probably need to have a 'process of publication' (script any) you run your generated book and chapter files that would scan for an attribute that shows some properties must be set on the table. The @outputclass attribute is typically used for this kind of thing. I'm not aware of what anyone in default FrameMaker DITA, who put in place to manage this type of formatting of the tables.

  If this formatting that you try to apply is consistent for the whole table, it is possible that you will be able to do this by creating a new table format that has this set of default formatting. When you insert a table in a subject, the table format is assigned to the tgroup/@outputclass attribute and this is the form that is used when rendering the table. Just create a new table in the structured application model and put in place this format to have the properties you want. Then, when you insert the table, be sure to select this format. It can be hard to set this up, but it * should * work.

  However, if this does not work, or you need more refined formatting applied to the parts of the table, I produce a tool called DITA-FMx, which offers extended DITA creation and publication of the options for FrameMaker. It offers features that allow this type of table set shaped to be applied by setting the attribute @outputclass to a specific value on the line or cell. You can get more information on DITA-FMx here...

  http://leximation.com/DITA-FMX/

  Good luck!

  Scott Prentice

  Leximation, Inc..

  www.leximation.com

• Anyone know if the Adobe Pro 11 program allows you to remove and rebonding of new tables in the existing PDF documents?

  Anyone know if the Adobe Pro 11 program allows allows you to remove and re - paste new tables in the existing PDF documents?

  Hi span Structures.

  Acrobat Pro XI allows to edit/insert text and images, but it is not intended to do some heavy lifting in this Department. And, there is really no way to modify the tables in Acrobat, because they are generally made of individual vector lines that you cannot fill.

  If you have many changes to make, or want to add/remove a table, you better make these modifications in the source application and by recreating the PDF file.

  Best,

  Sara

• expdp + query option to export from several tables with the same condition

  Hello
  
  We want to export a subset of data only from databases to another. Both on AIX.
  
  Source/testdatabase 11.2.0.3 (non partitioned tables)
  Target productiion 11.2.0.3 database (separate tables)
  
  Tables of same names of columns but diffrenet structures a partitioning index and traget so only want to import content
  
  Each source datbaase hascolumn seq number table and want only to extract the last months of data.
  
  
  

  TABLES:table1,table2...
  DUMPFILE=dump_dir
  CONTENT=data_only
  QUERY= table1:"WHERE seq_num >100 "

  want to use expdp but not sure how to make sure that all tables have the seq_num WHERE > 100 condition, if let table1: go out and have just
  QUERY = "WHERE seq_num > 100"this condition would apply to all tables that we want."
  
  
  I'm assuming that can also use impdp CONTENT = data_only?
  
  Any ideas/thoughts?
  
  Thank you

  QUERY = "WHERE seq_num > 100"this condition would apply to all tables that we want."

  Yes, it will work for all tables, but ensure that all exported table must include this column.

  QUERY
  Default: no
  Goal
  Allows you to filter the data that is exported by specifying a clause of a SQL SELECT statement, which is applied to all tables in the work of export or a specific table.

  The query_clause is usually a WHERE clause for the selection of refined lines, but could be any SQL clause. For example, an ORDER BY clause can be used to accelerate a migration from a table in a heap in a table held in index. * If a [schema]. table_name is not provided, the query is applied to (and must be valid for) all tables in the export job.*

  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/dp_export.htm

• query MySQL (search multiple tables in the database)

  I have 12 tables in a database - January to December.

  I need to find all the tables 'keyworrd' 12 phrases submitted by the user via a search form.

  Need to create a simpler way to do as below with 'UNION '. I have incorporated 2 tables in the query below, but I need a query more "condensed" for all tables of 12?

  $sql = (' SELECT * FROM January WHERE tourTitle = "'.") $keyword. "' UNION SELECT * FROM February WHERE tourTitle = ' '. '" $keyword.' » ") ;

  See you soon

  Operating system

  Booth wrote:

  > That's what I did last year, but thought I would break down this year in 12 easier to work with tables.

  No, Ben is correct. 1 using table for each month is absolutely the wrong way. It violates the basic rules of standardization and causes all sorts of problems.

  > Breaking down appealed to be more so I can keep all these months

  > together instead of potentially become scattered across a table.

  That's what you use the Order By clause for.

  > If by chance the customer says they want to update x, y or z, I can go

  > straight for the month in question, without the need to browse

  > dozens of pages in phpMyAdmin, because there are no real management CMS in place for this process.

  Don't know what you're saying. Performing inserts, updates and queries is much easier using a single table.

  Whenever someone asks for a way to search through more than one table, he told me that the data structure is not well designed.

  When I did this job last year there were about 60 pages created in phpMyAdmin. Records of January could be anywhere on these 60 pages I might add on additional folders much later in the process.

  My thought behind this was to combine all entries of the month so I could view them easily in phpMyAdmin.

  Now, due to my lack of knowledge on phpMyAdmin, it would be possible to create a query to show only entries from January, I suspect that she can do.

  I agree it is much simpler using 1 table to select and browse BUT I need if the opportunity presents itself to be able to view all entries January or February etc. one after another, not 10 on page 2 and 3 on page 7 and 5 more to page 47 of phpMyAdmin.

  So I quess what I really need, it is write a select query in phpMyAdmin that shows only the entries selected for the requested month. I did not much research into what phpMyAdmin can do... so I guess I have to.

  PUBLISHED:

  Arrgh, you see it WAS so SIMPLE:

  SELECT * FROM 'towers' months WHERE = "March".

  It's because I'm afraid of the bloody thing in case I mess up something!