Table update do not command button is held down
Hi guys,.
My application gets the data and then returns it in a table that is updated after each set of data is read. This part works fine, however I also require the user to be able to hold down one of the two buttons to control the function of an actuator control (forward and backward). Explain it further, when one of these buttons are pressed a voltage is output, releasing the tension is reset. However, the key is held down the table does not continue to date, when the button is released the table then updates through all the values in the queue. I understand that this is most likely a problem with holding the button causing the other user interface events are not processed. I therefore tried to use ProcessSystemEvents(), ProcessDrawEvents(), and experiments using an async timer to control the update of the UI through PostDeferredCallback(), all this without success.
If anyone can help with a solution that would allow me to run both of these functions required at the same time it would be greatly appreciated!
Thanks in advance
Ben
Problem solved by simply swallowing the event, I am able to perform the functions desired!
See you soon
Ben
Tags: NI Software
Similar Questions
-
Seems to happen whenever itunes is running. No warning whatsover, the screen goes black and the music stops. The macbook turn then back unless the power button is held down for more than 10 seconds.
ITunes only worked, it wasn't overheating or anything.Any ideas?
Try SMC and NVRAM resets:
https://support.Apple.com/en-us/HT201295
https://support.Apple.com/en-us/HT204063
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao.
-
Satellite A300 think button is held down and starts (long)
Hey sorry it's long, but I'd really like some help,
OK, so I was wondering if there is a way to solve this problem...
I was on my Satellite A300 (just over a year) last night playing Left 4 Dead 2 demo using stream network and everything suddenly co-op Online camera Assistant window opens minamising Left 4 Dead 2.
I found it strange because I had closed the sidebar of popup for Camera Wizard at startup so that there would be no popup and do exactly what he did...
Then after be confused I just clicked on Left 4 Dead 2 and thought 'I'll deal with that in a sec... When Left 4 Dead 2 she maximized again, (it took a few moments where there is a black screen and about 1 second of audio loopback), I couldn't play physically, but I could watch the game in a special mode that allows to pause and let HAVE succeed for a while. Also the game in chat window has increased.
I was at the first try just click the button disable control DO but the game wouldn't answer. Then section entered the window of my cat began to fill with ' black so I tried to get rid of them. All I could do was culminating with my mouse, then more ' zaeza them would replace.
After trying for a while and Ctrl + Alt + Del Alt + F4 with no response except for the ' black poor computer must be stretched with Left 4 Dead, I decided open and Stream, Illistratror and the camera open in the background then I pressed the power button (set to stop on my computer) and waited...
Left 4 Dead 2 closed, as camera Assistant, I think... and then it froze little so I just held down the power button (sorry, I know it probably wasn't the best move) and my laptop is off...
Well, when I tried to turn it back on the screen black "Toshiba Leading Innovation" appears along with the small footer explaining what to do F2 and F12. After that, the screen switches to the small blinking text bar thing (sorry I dunno what it's called...) but the bar flashes and stays there for about 4-5 seconds and then blinks and the new, although it seems slightly duller in color) and then only once (from the computer even if the headphones are plugged) and Yes... I need to disable...
Remembering of the ' Melissa I assumed that the computer was not happy that 'u' button was held down at startup so keep in mind that the fron keys are actually removable, I (very carefully) removed the front "u". Everything looked "normal" under... (I compared it to the key 'y') and so he presses a few times and re-places of the façade. On count it... Same thing happened...
I then tried to take out the battery and then put it in to see if this would help... Again, the tone has played... I have unplugged my iPod, took on the CD and removed the memory card to see if it would help... It didn't unfortunately.
So next I tried to turn on the whist of the computer by pressing the 3 keys (I thought it might cancel the 'u' key) key maintained abd "b + n + m". The first time I did this boot manager Windows open instead of the ring. I have Windows Vista so when I tried to continue pressing "enter" nothing happened... Then I turned off the computer and tried again (this time with q + w + e as I thought maybe hold b + m starts Boot Manager). This Windows error recovery time is displayed with the options; Safe mode, Mode safe mode with networking, safe mode with command prompt Mode and start Windows normally. Yet once Enter would not work... And this is my time so far...
Please help if you can >: I'm afraid if I take on a Japanese person Compute they will wipe everything...
Thank you
Rochelle
(again, I'm sorry this is so long but I thought people might wan't details...)
Hello
You can try to start windows in safe mode by pressing the F8 key and then choose Safe mode.
Then windows should start only using certain necessary processes
If the history is related to the issue of software then you should be able to start safe mode -
Accents do not appear when the button is held down
When I used to hold a key (example e) a list of the different accents, it would seem that I could choose. Now, when I hold the same key letter repeats instead? I haven't changed the settings so don't know why it does is no longer. All solutions?
Thank you
Ben
What is the language of the value, it has itself changed?
How long are you press and hold the e?
-
Keyboard not repeat when key held down.
How can I get my wireless keyboard to repeat the letters when the hold key for example 1000000000000000000000.
Seems to be a common fault from what I've read.
Best regards, John
Hi John,.
not a fault, for Apple, it is a feature of easy support use of accented characters and your keyboard behavior depends on the application using your.
More information is here:
How to type accents and symbols emoji on your Mac - Apple Support
In particular the section "repeat a character" describes what is boring to you, I think. But it's exactly like it is described there. For example in text editor you don't tap and hold the letter 'a' for abdelkrim repeated... but in the Terminal, it'll work.
I agree that the copy of the key to the clibboard and using command-V to repeatingly insert is not a very satisfactory solution. More like a workaround solution.
Best regards, Lars
-
apply the filter command button does not
Hello experts, I have the code to apply the filter of order button below, but when I click on the command button, it runs under code but works. Array is not be filtered:
{} public void applyTableFilters (ActionEvent actionEvent)
FilterableQueryDescriptor qd = (FilterableQueryDescriptor) myTable.getFilterModel ();
QueryEvent queryEvent = new QueryEvent (searchResultTable, qd);
myTable.queueEvent (queryEvent);
AdfFacesContext.getCurrentInstance () .addPartialTarget (myTable);
}
< af:commandButton text = "ApplyFilter".
ID = "applyFiltersCB" styleClass = 'blue '.
actionListener = "#{viewScope.myBean.applyTableFilters} '"
Binding = "#{viewScope.myBean.applyFilterCB} '"
immediate = "true" >
< / af:commandButton >
< af:table value = "#{bindings.myList.collectionModel}" var = 'row' "
Rows = "#{Bindings.myList.rangeSize} '"
emptyText = "#{bindings.myList.viewable?" "{'No RECS found': 'Access Denied.'}".
fetchSize = "#{bindings.myList.rangeSize} '"
disableColumnReordering = "true" rowBandingInterval = "1".
inlineStyle = ' height: 400px; "
filterModel = "#{bindings.myListQuery.queryDescriptor} '"
queryListener = "#{bindings.myListQuery.processQuery} '"
filterVisible = "true" varStatus = "vs."
selectionListener = "#{viewScope.myBean.currentSelectionListener} '"
rowSelection = "#{viewScope.myBean.rowSelectionMode} '"
ID = "t1".
Binding = "#{viewScope.myBean.MyTable}" >
< af:column sortProperty = 'year' filterable = "true" sortable = "true".
shortDesc = 'AnnΘe Prg'
headerText = "Year" Prg"id = 'c4' >
< af:outputText value = "#{row.yearCode}" id = "ot6" / > "
< f: facet = name 'filter' >
< af:inputText label = "" id = "it1" shortDesc = "Prg Yr Filter" "
value = "#{vs.filterCriteria.yearCode} '"
maximumLength = "5" >
< / af:inputText >
< / f: facet >
< / af:column >
......................................
< / af:table >
Appreciate any help.
Finally it worked. The question is the table PPR using backing bean does not display the filtered data rather than it shows full data. If I use UI PPR, then apply filter method works very well.
-
Whose action command button does not redirect me to another page. Why?
Hello
I have a command button in a jspx page and an unlimited workflow with two pages, where there is a rule of flow control between them, which needs to redirect the user from the first page to the second page. However when the user clicks the button, the updated page actually without having to navigate to the second page. Why does this happen?
Here are the details:
ADFC-config:
<-flow-control id rule = "__42" >
<-activity-id id = "__43" > first < /-activity-id >
< control-flow-case id = "__44" >
< result id = "__49" > go < / de-results >
<-activity-id id = "__45" > second < / to-activity-id >
< / control-flow-case >
< / control-flow-rule >
command button:
< af:commandButton text = 'Go' id = "cb1" action = "go" / >Well, can you give more details?
Jdev version?
You start the app with a url ending with ".jspx' by chance?
If so, you must remove this ".jspx" ending as it does not start the workflow.Timo
-
Bug HTML table/pesky command button
I have a few products where I paste in a form of "command button" in Yahoo stores. The code looks like this:
< form method = "post" action = "<!-#ystore_order id =" pbn0059 "- >" > < input type = "submit" value = "Order" > < / make >
I used it in a previous site without any problems. However, in my current site, when I paste this code in my table
When the command button should appear, it renders (in IE and Firefox), with two undesirable characters appear
just before the command button (">"). You can see on the site, to the right of the image of pipe:
http://www.pulversbriar.com/gallery1.htm
I pasted the same code in an empty html page, and the problem goes away:
http://www.pulversbriar.com/test2.htm
So I can only assume it is something on the table, or the surrounding div/formatting HTML code that causes the problem. However, when I create a new table and paste it into the same code, the problem recurs.
I was on the phone to Yahoo about it, and they say it's a problem of DW. I am not the problem, but it
must be something elemental... right?
Thanks in advance for any help with this problem. If more information would be useful, let me know and I'll post.
-steveThanks for responding, Murray. After that I've reworked the tables and could not reproduce the problem.
I'll create a new post if I run this new.Steve
-
Command buttons and lights not working not properly - Satellite U400
I am currently facing a problem with my Satellite U400, which runs under Windows Vista / Bios v3.00.
First, the control buttons no longer work, as when I press on them, nothing more. It was that when you press on, the LED lights for a while and then come back to life.Now, LEDS are constantly lit. Even when the laptop is turned off and the cable is removed.
So far, I tried to turn on and turn off the LED option in the Bios (that is turned on and off the LED on the touchpad and the logo of Satellite, but not on the control buttons). I uninstalled and reinstalled the Value Pack from recovery CD - no change. I deleted and reinstalled the Windows called devices: ACPI fixed feature button (thought this might help).
Is there anything else I could do?
Once the problem is resolved, I wonder if the command buttons can be customized. For some reason I do not seem to find the appropriate program to set those.
Thanks for any input.
Hello
Someone suggested this work around:
You must install the utility to control on the one hand, and where to install the value Pack, choose Advanced Options and uncheck the Support Button TOSHIBA.Welcome them
-
After you click the command button, the user can not change form
This form with a command button to the Page 5 that duplicates the page: http://pardons.delaware.gov/pdfs/pard_app.pdf
If the user running this command button and then closes and opens again the form, the user is more able to add or change anything whatsoever in the form. Instead, the user gets an error message that says "this document enabled extended in Adobe Acrobat Reader DC. features." The document has been changed since its creation and use of the extended functionality is no longer available. Please contact the author for the original version of this document. "Is there a way to fix this? Thank you.
FYI, the JavaScript code for the command button is the following:
var fld;
var arrayFields = new Array (this.numFields);
(IT) {/ / default is 'this'}
for (var k = numFields; k; k-) {}
for (var k = 0; k < numFields; k ++) {}
FLD = getField (getNthFieldName (k));
If (fld.name == "txtCrimSumOff_Cnt") {}
If (fld.value == 1) {}
FLD. Value = This.PageNum + 1;
} else {}
FLD. Value = FLD. Value+ 1;
}
var page_start = fld.value;
}
}
}
Spawn of named model
var t = this.templates
strName = "CrimSumOff"; var
for (var i = 0; i < Extremity; i ++) {}
{if (t [i]. {(Name.IndexOf (strName)! =-1)}
myPage var = t [i] .spawn (page_start, true, false); together second opt to false to keep the names of files
Get the name prefix field that Acrobat will automatically add the new fields
var f_prefix = 'P' + (page_start) + '.' strName + '1';
Reset the newly created fields
this.resetForm ([f_prefix]);
Go to the new page
this.pageNum = page_start;
}
}
Yes. If you don't have the original version, unchecked, you can open the version activated in Acrobat and select: file > save a copy
This will create an incompatible version. Note that it will automatically open in Acrobat when you do this.
-
Error ORA-01779: table preserved key not on update
Hello.
I'm doing this update:
What I get is:UPDATE ( SELECT aux.o_customer AS a1, REGEXP_REPLACE(kna.kunnr,'^0*','') AS a2 FROM payer_catalog cli, customer_master_cat kna, aux_customer aux WHERE aux.o_customer = cli.cte_num AND cli.cte_num = kna.cte_num ) SET a1 = a2;
ERROR at line 1:
ORA-01779: cannot modify a column that is mapped to a table not preserved key >
I have read on the key preserved table, but I'm going through a difficult time. Given that I did not understand the concept. Your help is greatly appreciated, so I can understand the question.
It's the table create:
And some inserts:CREATE TABLE AUX_CUSTOMER ( KEY_GUIDE VARCHAR2(30 CHAR), O_CUSTOMER VARCHAR2(10 CHAR), O_NAME VARCHAR2(80 CHAR) ); CREATE TABLE CUSTOMER_MASTER_CAT ( KUNNR VARCHAR2(10 BYTE), NAME1 VARCHAR2(100 BYTE), NAME2 VARCHAR2(100 BYTE), CTE_NUM VARCHAR2(10 BYTE) ) ; CREATE TABLE PAYER_CATALOG ( CTE_NUM VARCHAR2(10 BYTE), PAYER VARCHAR2(100 BYTE) );
This are not the tables I have created, I just checked the information.Insert into AUX_CUSTOMER (KEY_GUIDE,O_CUSTOMER,O_NAME) values ('171109366944 23/01/12','N001210514',null); Insert into AUX_CUSTOMER (KEY_GUIDE,O_CUSTOMER,O_NAME) values ('005107145536 23/01/12','N001210600',null); Insert into AUX_CUSTOMER (KEY_GUIDE,O_CUSTOMER,O_NAME) values ('666318008569 23/01/12','0000104574',null); Insert into AUX_CUSTOMER (KEY_GUIDE,O_CUSTOMER,O_NAME) values ('043188136629 23/01/12','N001210514',null); INSERT INTO CUSTOMER_MASTER_CAT (KUNNR,NAME1,NAME2,CTE_NUM) VALUES ('0000008147','HONDA MOTOR','COMPANY LTD','N001210514'); Insert into CUSTOMER_MASTER_CAT (KUNNR,NAME1,NAME2,CTE_NUM) values ('0000009559','APPLE','INC','N001210515'); Insert into CUSTOMER_MASTER_CAT (KUNNR,NAME1,NAME2,CTE_NUM) values ('0000104574','SAMSUNG ELECTRONICS ','INC',null); Insert into PAYER_CATALOG (CTE_NUM,PAYER) values ('N001210514','HONDA'); Insert into PAYER_CATALOG (CTE_NUM,PAYER) values ('N001210515','EXTERNAL CUSTOMER'); Insert into PAYER_CATALOG (CTE_NUM,PAYER) values ('N001210516','CELLULAR COMPANY');
Kind regards.Hello
If it is not clear how to do an UPDATE, there is a good chance that the UPDATE is not the right tool for the job.
Try instead MERGER.MERGE INTO aux_customer dst USING ( SELECT aux.key_guide , MIN ( REGEXP_REPLACE ( kna.kunnr , '^0*' ) ) AS a2 FROM payer_catalog cli , customer_master_cat kna , aux_customer aux WHERE aux.o_customer = cli.cte_num AND cli.cte_num = kna.cte_num GROUP BY aux.key_guide ) src ON (dst.key_guide = src.key_guide) WHEN MATCHED THEN UPDATE SET dst.o_customer = src.a2 ;
What are the results you want from the given sample data?
The MERGE statement above let aux_customer that looks like this:KEY_GUIDE O_CUSTOMER O_NAME ------------------------------ ---------- ---------- 005107145536 23/01/12 N001210600 043188136629 23/01/12 8147 171109366944 23/01/12 8147 666318008569 23/01/12 0000104574
Whether you use the FUSION or the UPDATE, if you update the actual table or view online, please make sure that the query that produces the new product (at most) one value of 1 line for each line in the table updated.
-
Command button inside the column heading in the table of the ADF
Hi all
I want to insert two command buttons inside the column header of a table of the ADF.
In my mind these buttons should replace the buttons two default (triangles) to sort the column in ascending or descending order.
You know a solution? Because it's 2 days I'm trying, but no way.
Thanks in advance
Stefanohave you tried facet the af pane header: column?
-
Command button is not activated after action is completed
Hi all
I am creating an Excel since the command button using a method of bean support. The command button is not activated after that action is completed. but the information load in Excel and excel also created correctly.
Code method as follows:
public void exportToExcelEventForm () throws IOException
{
Date dt = new Date();
SimpleDateFormat fmt = new SimpleDateFormat("yyyy-MM-dd_HHmmss");
String filename = fmt.format (dt) + ".csv".
String contentType = "application / vnd.ms - excel";
FacesContext fc = FacesContext.getCurrentInstance ();
HttpServletResponse response =
(HttpServletResponse) fc.getExternalContext () m:System.NET.FtpWebRequest.GetResponse ();
response.setHeader ("Content-disposition",
"attachment; filename ="+ filename);
response.setContentType (contentType);
PrintWriter out = response.getWriter ();
out.println ();
out.println ("event details");
out.println ("testing");
out. Close();
fc.responseComplete ();
FC. Release();
}
What is at stake in this? pls guide meWhy not put an af:fileDownloadActionListener in the command button. In the bean you need a method like
public void exportExcel(FacesContext aFacesContext, OutputStream aOutputStream) {... }
You can use the stream output and when you finished just rinse. Do not close the stream and does not complete the answer.
Timo
-
Click the command button DOES not
Hello
I have a single command button on an UIR embedded in a dll I call TestStand. The button does nothing when you click sort, but when I press
or , it works fine. Does anyone can say why this is happening? int CVICALLBACK TERMINATE_BUTTON (int, int int event, control panel,
void * callbackData, int eventData1, int eventData2)
{
switch (event)
{
case EVENT_COMMIT:event action
break;
case EVENT_LEFT_CLICK:
event action
break;
case EVENT_LEFT_CLICK_UP:
event action
break;
}
return 0;
}Thank you in advace,
JulianC
Hello JulianC, a little research on the forum showed this thread that describes nearly the same situation as yours: you might find helpful advice, especially in LuisG post marked as solution and following.
-
Place the not clickable secure command button. Can't buy.
as the title says. I'll subscribe to images from adobe and I can click on the command button secured to place inside throughout the day. It doesn't do anything. And there is no direct support. I think that adobe wants me to be able to talk to someone live if I'm trying to give them my money.
Hello
I solved this problem by clicking on use another payment method and relative to the seizure of the existing card information adobe has already with my account of cloud! Now his work all the
Maybe you are looking for
-
I have a program for the acquisition of data on computer #1 (not labview) who writes in an excel sheet to spread and I would have a line of data transferred to a different excel worksheet that runs labview (computer #2) on the same network. I would l
-
My computer is threatened by this type of scam?
I wish I had read this earlier. I was just hit with one of these calls. I am the perfect target because I know very little about the computer. What I did and regret it now, is that I let them teach me to a website call www.ammyy.com and from there, t
-
Re: long wait for verification of the e-mail address for test Board
A few days ago, I asked in the long waiting to have our verified email so that we can start our 30 day trial of the windows desktop. Its been a few days and still no response. I am considering buying just the dang program, because we need, like last
-
I do not know it is an embarrassing question easy - but after making our initial installation, which agent I have to deploy to our VC being data collection? I can't find in the installation guide. Our vFolight/VC servers are the two Windows 2008 R2.
-
Windows Update does not work on Windows 7
Checks the updates and nothing happens.