Tables activated moving version of one tablespace to another - what is table of _LCK?

Similar Questions

• Some images do not appear after moving images from one folder to another

  Lost photo should find I was moving images from one folder to another.  He said that I had this picture in the folder.  Then he asked if I wanted to replace the existing image.  I said yes.  Now I miss several photos and cannot find anywhere - but some went through.  I need these photos in return.  Any ideas on how to get back them?  Thank you

  I was moving images from one folder to another.  He said that I had this picture in the folder.  Then he asked if I wanted to replace the existing image.  I said yes.  Now I miss several photos and cannot find anywhere - but some went through.  I need these photos in return.  Any ideas on how to get back them?  Thank you

  ======================================
  The dialog box asking if you want to "replace the existing image.
  occurs when the target folder contains a file with the same
  name that you are moving.

  Unfortunately... when a file is overwritten (replaced) with another
  file of the same name... the original is unrecoverable.

  There is a slight possibility... If the photos had been altered in
  Windows Live Photo Gallery... the unreleased original versions which
  could be cancelled in may still be in the following folder:

  C:\Users\\Appdata\Local\Microsoft\Windows Gallery\Original photos.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Computer scientists moved us from one server to another. The change of server name has left me with an orphan sync partnership.

  Our it staff moved us from one server to another.  Although I did a sync with all my spotted "available offline" files before the move, the change of server name left me with an orphan sync partnership.  Is anyway to disconnect this partnership?  I have not been able to find a way.  Thank you.

  original title: orphans of sync partnership

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Vista Networking forums. Please ask your question in forum Windows Vista Networking TechNet.

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• Moving files from one host to another, Skydrive will work?

  Original title: moving files

  How can I move files from one room to another? You need to move them so I can save some monthly hosting fees. Can I use Skydrive for this?

  David Baumgardner

  How can I move files from one room to another? You need to move them so I can save some monthly hosting fees. Can I use Skydrive for this? David Baumgardner

  Hey davemaninohio

  read information from skydrive on below link for what it does

  http://explore.live.com/Windows-Live-SkyDrive

  Walter, the time zone traveller

• Moving files from one event to another in the same library

  When I try to move the file by dragging the clip from one event to another, I get this message that "the file could not be opened because there is no file of this type." I have Final Cut Pro X was last updated.

  I find it interesting since when I imported the raw images from an SD card for Final Cut Pro, I copied all the files in the library. I even played the files and they worked.

  I would be very grateful for any answer I can receive. If worse comes to worse, I can always import the images even once to the appropriate event, because I still images raw on one SD card.

  You can post a screenshot of your browser?

  In addition, what happens when you use the reveal based on the Finder.

• Moving control of one diskgroup to another file

  How you would move a controlfile of one diskgroup to another in a CAR?

  usersp wrote:
  How you would move a controlfile of one diskgroup to another in a CAR?

  For example

  SQL>show parameter control_files
  control_files                        string      +DATA/ORCL/controlfile/current.110.293846193
  
  SQL>alter system set CONTROL_FILES = '+FRA' scope=spfile
  
  SQL>shutdown
  rman target /
  RMAN>startup nomount
  RMAN>restore controlfile  from  '/+DATA/ORCL/controlfile/current.110.293846193';
  RMAN>alter database mount;
  RMAN> alter database open;
  

  Hope this helps
  Also do not forget our suggestion of marking as correct or useful if you think that they were :)
  https://forums.Oracle.com/forums/Ann.jspa?annID=718

• How to move patterns of one tablespace to another?

  Hi people,
  
  REL: 10.2.0.4.0
  
  I have a requirement to spend some schema of a tablespace (PUBLISH) to a different tablespace (USERS) within the same database. I decided to use
  the pump data with the option "remap". Unfortunately, the operation fails because the complaint database objects already exists.
  
  Here is my code and from the journal
  

   impdp system/*** REMAP_TABLESPACE='PUBLISH':'USERS' DIRECTORY=dump_dir DUMPFILE=schema_exp.dmp SCHEMAS=move_test 

  Journal of data pump is:
  

   Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  Master table "SYSTEM"."SYS_IMPORT_SCHEMA_01" successfully loaded/unloaded
  Starting "SYSTEM"."SYS_IMPORT_SCHEMA_01":  system/******** REMAP_TABLESPACE=PUBLISH:USERS DIRECTORY=dump_dir DUMPFILE=schema_exp.dmp SCHEMAS=move_test
  Processing object type SCHEMA_EXPORT/USER
  ORA-31684: Object type USER:"MOVE_TEST" already exists
  Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
  Processing object type SCHEMA_EXPORT/ROLE_GRANT
  Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
  Processing object type SCHEMA_EXPORT/TABLESPACE_QUOTA
  Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
  Processing object type SCHEMA_EXPORT/TABLE/TABLE
  ORA-39151: Table "MOVE_TEST"."T1" exists. All dependent metadata and data will be skipped due to table_exists_action of skip
  Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
  Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
  Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
  Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
  Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
  ORA-31684: Object type PROCEDURE:"MOVE_TEST"."PROC1" already exists
  Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
  ORA-39082: Object type ALTER_PROCEDURE:"MOVE_TEST"."PROC1" created with compilation warnings
  Processing object type SCHEMA_EXPORT/VIEW/VIEW
  ORA-31684: Object type VIEW:"MOVE_TEST"."V_T1" already exists
  Processing object type SCHEMA_EXPORT/VIEW/GRANT/OWNER_GRANT/OBJECT_GRANT
  ORA-39111: Dependent object type OBJECT_GRANT:"MOVE_TEST" skipped, base object type VIEW:"MOVE_TEST"."V_T1" already exists
  Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
  Job "SYSTEM"."SYS_IMPORT_SCHEMA_01" completed with 6 error(s) at 16:40:06 

  Can the drawings be moved using data pump? If this is not the case, can someone please suggest an alternative?
  
  Thanks in advance
  
  Rogers

  After export patterns, drop it and recreate them with the default tablespace for the USER, then impdp game allows to recreate the objects.

  If you do not drop objects/patterns, you will get errors you mention.

  You can also set the tablespace default to USERS for these schemas, then use the statement ALTER TABLE... MOVE... command

  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14231/tables.htm#sthref2297

  This will only move the tables. You will also have to rebuild all indexes and recreated them in the new tablespace.

  Expdp/impdp option is cleaner.

  HTH
  Srini

• Model slightly moving content from one page to another?

  Hi people,

  I use Dreamweaver MX (Yes, I know) on OS x 10.6.8 and I have problems with the content of the navigation in the models of moving slightly to the left and right between pages almost as created.

  See example in http://www.darrylvance.com/design_print.html and note the movement during the passage of the subpages (which are in the same position) back to the print, motion, other pages, etc..

  Top level pages have been created using a template (for navigation) and the subpages of printing have been created using a new model, which is identical to the first, except that there are navigation links added below.

  Another example is http://www.darrylvance.com/art_painting.html where the same model has been used for ALL pages, but the other and on the pages have a similar scale as in the first example.

  I'm assuming that the width of the content of the pages is causing these specific shifts, which are never seen in DW but appear when in the browser.  I rebuilt and rebuilt the offenders of the same correct pages and changed the width of the content, but I still get the same problem.

  I guess that there is some kind of anomaly in the table settings, but for the life of me I can't find.

  Thanks for your help.

  DV

  D M Vance wrote:

  The tutorial that you referenced uses a CSS style, but I'm not (AFAIK)

  No, you're not. Time to start. To maintain your site much easier.

  Linked to the head of your template CSS file contains the HTML code so it doesn't help.

  In your model, change

  ""... / 2011%20darrylvance.com/noline.css "rel ="stylesheet"type ="text/css">" "

  .

  TO

  NoLine.CSS"rel ="stylesheet"type ="text/css">" "

  Save the template and update all the child pages.

  Create a file only empty text named noline.css and insert:

  HTML {}

  Overflow-y: scroll;

  }

  Save inline.css in the directory of your Web site and upload to the server.

• Moving files from one account to another account

  I need to transfer files on vista from a user account to a different user account. Is this possible?

  Sure. Do it from an administrative account, or even more simply - copy the files in the Public directory on a single account. Now, when you connect to the other user account, you will have no problem by copying the files that are in the Public access to Documents of the user, etc.. And for more information:

  User - recommended configuration (Vista and Win7) accounts

  You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Moving hosts to one vCenter to another with power CLI

  All,

  Just need a little confirmation here on my understanding of PowerCLI. I'm still a novice so hoping someone can help out me.

  I need to spend 120 guests of a vCenter (4.0) in a new vCenter (4.1). These hosts are distributed among 15 poles on the vCenter origin. I think a powerCLI script will be the fastest way to do it, but I'm still pretty new for powerCLI and want to make sure I don't break anything. I have to be able to keep all the guests running and available during the process. Based on the reading of the reference guide, it looks like I can use the following commands. This is all assuming that I have already connected the appropriate vCenter. My hosts are a mixture of 4.0 ESX and ESXi 4.0.

  I am on the right track, or should I go a different route here? Is this what I should be concerned or could break using these commands?

  Remove-VMHost < DNS host name >

  Add-VMHost < DNS host name > - location (< cluster_name >) - user root - password password <>

  Thanks for your help!

  -Adam

  You're right, isn't the cmdlet Add-VMHost, one - server setting.

  But you can use the - location setting.

  Game-PowerCLIConfiguration - multiple DefaultVIServerMode

  $fromVC = OldVCName VIServer to connect

  $toVC = NewVCName-VICenter-to connect

  Remove-VMHost -Server $fromVC

  $dc = get - - Server $toVC data center

  Add-VMHost -location () - user - password root -location $dc

  The location can be a folder

• Other layout created when moving pages from one document to another

  I use CC on Windows 7 - I have 2 documents I want to merge and make 1 [I know people will want to know why I won't do - each document is the result of a fusion of different data - data merge can handle a master page - so I have 2 datamerges - 2 files - and just need to merge 2 files]

  This used to work wonderfully in ID 5.5 - now when I use the pages Panel to move the pages to the other document - it creates a different layout - it is so very hard for me to interlacing alternating pages - I use point power simply move the pages in place - but with right 2 layouts it behaves differently and in a manner I don't understand. Is there a way I can get around this? or avoid the alternative layout just have one. 2 page sizes are identical, so this isn't a problem of varying size - paragraph styles are the same as well. I tried to delete the alternative style but will not delete the pages more.

  Thank you

  There may be an even easier way.

  Right-click in the pages Panel document pages section or open the Panel menu and switch to view Pages in horizontally or vertically.

• Moving domain from one plan to another

  Hi guys,.

  I'm about to go live with my new partner site - if all goes well today. However since there is no practical way to redo the free partner site - I decided that I would upgrade to a paying account.

  So my question is, as I have to move my domain names on is the procedure to remove from the current location, then add them to the new site?

  What happens to the email in the meantime?

  Are there other unforeseen problems that may arise?

  Hi Sidney,

  Level 2 technical support, we cannot spend areas put to our partner area if the site is renamed. It stops at all the other sites created with her to work.

  Case # 183389606

  The reason why you can not add this domain - auroratec.ca to another site because this domain is your domain rebranding and even if you delete it from your partner site - business Auroratec DNS zone will not be deleted. This is because you have the sites created using your rebranding for example domain name woodlandjewellers.auroratec.ca

  In this case, what I propose here is Brad is to add the field to your partner site (by adding one of the registers instead of adding the new domain) and if you need to change the content of your partner site simply use a FTP client to migrate content from one site to the other.

  Please note that the rebranding domain cannot be removed from the system, so it can be used only in the partner site.

  So what I've done is added the field back using a records and set up a redirect to the new site with a new domain name until I change all my business cards, advertising, graphic design, vehicle etc for the new domain name. It all will work in the end - is not ideal, but I'll live with it. Prateek in support has been very helpful and complete.

• Moving preferences from one PC to another

  Hi all:

  I use Dreamweaver only from time to time so not an expert...

  My old PC is XP SP3 and DW CS4.

  I have a new PC running Win7 64 bit and have installed DW CS4.

  Is it possible to import preferences from my old computer, like locations ftp sites I maintain, passwords, etc?

  TIA,

  Denton

  Travel PREFERENCES would involve registry keys.  Moving site definitions is as simple as selecting all of your sites in a Manager DW of the Site and click EXPORT.  Then find the files * .ste, you just export, copy to the new computer and the Site choosing IMPORT and selecting them.

  Be aware that this operation just copies the site definitions, not the files in the site.  And make sure when you export the defs, you do the full export.

  Post edited by: Murray * CPA *.

• MOVING DOCUMENTS FROM ONE COMPUTER TO ANOTHER USING A MEMORY STICK

  My problem is that I had Microsoft XP on my old computer, so in order to update my system, I bought a new Tower renovated with Microsoft windows 7 on it.  Checked for viruses on all old files/documents that I wanted to move to my new system and everything was quite clear.  I then downloaded the information I wanted to transfer them to a memory stick.  I then set up my new system and tried to download this information from the memory stick, but "Avira" my anti-virus following refused to let me do this as he said it was not safe.  Could someone me the best thing to do - IE disable Avira temporarily while I download this information or y at - it another way around this? Also, I realized that I don't have Microsoft Office, but the Group Premium only, loaded on my new system and I was wondering if this had an impact on the download.  So I downloaded for free at office of the balance, but this made no difference to my transfer of such information across.  Could someone kindly help me with this problem.  I'm not very experienced with computers so would appreciate what needs to be done in the simplest if possible terms.   Thanks a lot waiting for your answers.  JJP

  If you have first analysed information on the XP PC, then temporarily disable Avira and complete the task of copy on your Windows 7 PC.

  You can try to copy the information in small batches to see what Avira dislikes.

  J W Stuart: http://www.pagestart.com

• vCenter server from unit 5.5 after the migration from one host to another host

  Hello

  
  

  I had to migrate our VCenter Server Appliance VM (5.5 x) that uses the database into another ESXi host.

  Once the VM has moved successfully from one host to another, after the virtual machine restarts, I'm not able to connect to it.

  I get the following error: Client is not authenticated to the Service of the inventory of VMware - https://web-vcenter1:10443

  I searched and followed many articles KB including KB 2037952 with no luck. I refreshed the

  SSL certificates, etc. and ideas.

  
  

  Thank you

  Shiva
  

  Hi Ryan,

  I fixed all my issues in upgrading the VCSA to the latest version. Version 5.5.0 Build 2414847

  Other treatments VCSA had already been upgraded to this version and it worked very well.

  Thanks for help with ideas.

  PS: You were right - I log in as root and not as an administrator and this is why I did not see the SSO pages.

  -Shiva