Tables of model data becomes read only in the relational model

Similar Questions

• ADF select several shuttles become read only when the value is

  Hello

  I want to ask about the select oracle ADF that many shuttle.

  Recently, I want to create a shuttle a lot with the pre value is set in the right box, select. When I try to set the value of the shuttle to select several properties. The shuttle many select transformed into an object as input like the image below text

  

  but when I'm not set to select several shuttles it became normal like that

  

  the method that I put in the value property is like that

  public list < BidClassification > getListBidClassificationTaken() {} finalClassification = new ArrayList(); The OperationBinding class method = ADFUtil.getMethodBinding ("retrSupSupplierClassificationFindAllBySupplierId"); method.getParamsMap () .put ("supplierId", getSelectedSupplier () .getId ()); List < BidClassification > finalClassification = method.execute () (list < BidClassification >). Return finalClassification; }

  the method that I use to set the position data is like this

  public list < SelectItem > getListBidClassification() {} retval = new ArrayList(); The OperationBinding class method = ADFUtil.getMethodBinding ("retrBidClassificationFindAll"); listBidClassification = (list < BidClassification >) method.execute (); for (BidClassification bc: listBidClassification) {} SelectItem item = new SelectItem(); item.setLabel (bc.getId ()); item.setValue (bc); retval. Add (Item); } Return retval; }

  I have already replace the method equal in the BidClassification class so there will be no more no problem

  Header 1
  < af:selectManyShuttle label = 'Grading' id = 'sms1"binding =" #{backingBeanScope.backing_vendorEdit.sms1} ' " leadingHeader = 'Ranking Master' trailingHeader = 'Grading of provider' > < f: selectItems value = "#{backingBeanScope.backing_vendorEdit.listBidClassification}" id = "si1" "

  Binding="#{backingBeanScope.backing_vendorEdit.SI1}"/ >

  < / af:selectManyShuttle >

  This the jsff xml where I put the shuttle several select no defined value

  < af:selectManyShuttle label = 'Grading' id = 'sms1"binding =" #{backingBeanScope.backing_vendorEdit.sms1} ' "

  leadingHeader = 'Ranking Master' trailingHeader = 'ranking of provider.

  value = "#{backingBeanScope.backing_vendorEdit.listBidClassificationTaken}" >

  < f: selectItems value = "#{backingBeanScope.backing_vendorEdit.listBidClassification}" id = "si1" "

  Binding="#{backingBeanScope.backing_vendorEdit.SI1}"/ >

  < / af:selectManyShuttle >

  Select this the jsff xml where I put the shuttle well with the value

  someone has an idea of what's going on with this code? ___. thx a lot btw

  @

  Yeay! I already fix it!

  BTW who behave the same as me.

  You must make a note on the setter and the Get accessor of the variable list you use

  * in my case, I don't implement the setter method and the list

• This caused all THE files, including Windows to become READ ONLY - cannot change whatever it is and can not change itself.

  Saved programs & Docs to a folder on another drive. Made the file READ ONLY so she would not get changed. Windows RELOADED. Copied programs (no longer available and/or damaged discs) and Docs for the new Windows. Now most of the Windows files, program files, all Doc files are READ only! Cannot change what anyone on Windows, load new programs or updates, and it doesn't allow me to cancel the attributes read-only in a file or a folder including the backup folder in the other player!  I copied backup files I want to save one by one in another folder in another player, so I can reformat and start over, but this issue has also become READ ONLY.  Can someone help me with this thing read-only?

  I'm sorry to say this, but you cannot back up Windows in this way. As you have unfortunately discovered, simply copying the program files does not work. You would have needed the system image using a program like Acronis True Image . There is nothing you can do about the programs; they should all be reinstalled from the media (CD or executable files downloaded from the Internet). With respect to documents, you can take possession of them. The read-only attribute is not applicable to folders in Windows XP.

  Appropriating a file or a folder under Windows XP [Q308421] - http://support.microsoft.com/?kbid=308421

  How can I get the Security tab in the folder properties? - http://www.dougknox.com/xp/tips/xp_security_tab.htm MS - MVP - Elephant Boy computers - don't panic!

• the documents become read-only when I download a document in word 2007

  I'm losing my mind on that, and it's impact on my work (and income). I have windows vista and word 2003, excel 2003 on my laptop. Whenever I have download a word 2007 document (I don't even register on my computer, just download it), ALL of my word and excel docs permutation for 2007!

  They become read-only!
  I have to solve this problem as soon as possible, as I have so many docs that I need to access and change for various reasons that are related to employment.
  Help, please!

  A version of Word 2007 came with the computer, for a trial period. I used it and never sent payment for the product key. I wonder how much it would cost? But anyway, I don't want to buy 2007 when 2010 is out. I probably still have the same problem with the docs 2007 reconfiguration to 2010 docs.

  Well, I think I have your situation sorted.

  You should go to the Control Panel programs and features and uninstall the Word 2007 Home and student if it is a trial. Uninstall the 2007 activation assistant as well. Restart the computer.
  After the computer comes back up, get back in programs and features and perform a repair on your Office 2003 Professional. This involves the selection Office 2003 Pro and clicking change above the list of programs. On the first screen, select repair , and then click continue at the bottom right. Go through the process normally, clicking Next or OK as required.

  This repair procedure will restore all your associations default file for the Office 2003 programs.

• All of my records have become READ-ONLY, how do? and is there a solution?

  Problem, all records have become READ-ONLY (read only box is FILLED, not checked)

  I made the possible corrections as I found here and NONE have worked.

  I took possession of the records.

  I made the run, cmd, attrib - r Road etc etc.

  I tried to do a different username to see if my account is corrupted.

  Please do not repeat the steps above.

  IM interested to know HOW this couldve happened.

  recent activities have been simply updated windows, so if an update has caused this, it will be fixed? is there a tool to fix?

  Masterbucks

  On Sunday, August 15, 2010 18:50:17 + 0000, MasterBucks wrote:

  Problem, all records have become READ-ONLY (read only box is FILLED, not checked)

  Records are not read-only. The read-only attribute is not applicable to the
  records. Ignore the read-only box. It has no meaning for folders.

  Ken Blake

• Under certain conditions (by program) make MessageCheckBox read-only for the specific rows in a table

  Hello

  I have a table (on a custom page) which includes the columns MessageStyledText and MessageCheckBox column, I want to put the MessageCheckBox to read-only if the value of the column MessageStyledText of the line is "XYZ", could someone give me some advice on how this can be achieved?

  Oracle EBS: 12.1.3

  JDEV: 10.1.3.3.0.3

  Kind regards
  Carl

  Sorting using SPEL (according to https://forums.oracle.com/message/1815932#1815932).

• Can we do a line read only in the advanced table?

  Hello
  
  We have an obligation where the user wants to the first line of a table advanced to readonly, and remaining lines as editable lines. Can someone please let me if we can achieve this?
  
  Thanks in advance.
  
  Solène

  Hello

  Yes, you can set row as read only in the table in advance.

  Steps to follow:
  (1) take the attribute Transient seen as ControlReadonly (Boolean Type) in the attached with advanced table view object.
  Note: Your all the lines will have now a new attribute called ControlReadOnly.

  (2) using the property read only set SPELL on each field of your advance deposited the region.
  as ReadOnly ${oa.. ControlReadOnly}

  (3) the loading of the page, in the query itself process you can set the attribute to True and if you need frontline to travel up to the end of the rows in the table and set the value to False for ControlReadOnly.
  ex: line = vo.first ();
  row.setAttribute ("ControlReadOnly", Boolean.TRUE);

  Kind regards
  Swati.

• Several Applications using UDP Multicast Open (read only) on the same port

  Hi all

  Currently, I am trying to build a system that has the following architecture:

  RF Server = "1-9 A/D '-> «UDP Multicast (write-only) 1-9"»

  Workstation operator = "QTY (N) Data Display Apps all need independently to access one of the 9 UDP multicasts at a time.

  Essentially, I have 9 items of antenna that all digitized and distributed via UDP separate multicast address and port. On the receive side I need to be able to have the N number of data display applications where everyone can select the antenna element he wants to get data from. My current goal for N is 7 and the worst case for the data rate is 3.75 MSps IQ rates on each display.

  My question is whether or not it is possible to have several "UDP Multicast Open (read only)" on the same port but one by application Data Display? Also, are there limitations with this.

  On my local machine I tried a bit with the example 'UDP Multicast Sender.vi' and "UDP Multicast Reciever.vi". I created a "UDP Multicast Reciever2.vi" as another application that listens on the same port/Multicast address as the original receiver. No errors are thrown when you run the receivers and both receivers get the data string sent by the sender at the same time. Can I send data/a. 'PC'-> 'Router Ethernet'-> 'PC with receiver UDP N' reliable evidence? If so, that's fine, because it would be relatively easy to implement. BTW, I do not fear with occasional loss of data what is happening with UDP.

  If this does not work, I am also curious to know which deals with data deduplication. For example, two applications by subscribing to the same Multicast address and port does the router send two copies (which increases network traffic)? Or, the Windows operating system get a single UDP packet to the port and replicate in two independent applications?

  Below (or attached) are the two methods I thought. If multiple readers of UDP does not work so I thought I'd do a DataSocket "Data Distribution layer" between the incoming UDP sockets and display data on the workstation applications. This would add a bit of memory/processor to the PC workstation, but I know the DataSocket server of NOR can handle a sender unique multiple receiver architecture.

  

  

  Thank you

  Tim S.

  Hi Tim,.

  The number of concurrent applications, get data on the same port UDP will probably be a limitation of the OS as well. If I had to guess, I would say that 7 of the applications should work correctly. In fact, the memory/CPU bottlenecks are probably the limit on how many simultaneous readers we have, especially since the capablities of PC hardware differ from one computer to the other. I doubt that the OS has a strict limit.

• How can I uncheck "read only" in the download folder in a way that it will remain disabled

  How can I uncheck "read only" in the download folder in a way that it will remain disabled

  If done through properties does not stick, have you tried running the command attrib-r at the command prompt?

  Click Start, click run, type cmdand press ENTER.
  To view the syntax for the Attrib command, type attrib /? at the command prompt.

  Check MS article for more details.
  You cannot view or change the read-only or system attributes:
  http://support.Microsoft.com/?ID=326549

  I guess that you are authorized to make changes on this file, if it does not play here.
  How to set, view, change, or remove special permissions for files and folders in Windows XP
  http://support.Microsoft.com/kb/308419

• Not set to read only on the files so that they can be shared and changed on a network.

  I've seen any other questions on this subject, but they do not solve my problem.  I had to reset my network because I have a new router.  Now I can open the files on my main computer from another computer, but they always opened read-only.  I tried to set sharing and security to allow the share on the network and allow network users to change files.  But I can not turn off the box next to 'read only' in the general tab.  I also tried to start XP in safe mode and take possession of the file (article 308421), but this does not work either.

  I also tried in vain to change the attributes of command line to remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  After trying a few other corrections, I finally did a system restore before the installation of the network.  Then, I used the Network Wizard to reconfigure the network. I changed the name of the computer, so I knew what was the new connection.  Then I copied the wizard network on a USB key and reconfigured the second computer.  Now everything works fine (I can open, edit and save files between computers) even if the readonly attribute is always highlighted on the record.

• Can not download anything "keep telling my Temp folder is read only in the properties.

  So I change it then when I click on it. Its the same thing. I have disabled system restore. Mr. ran fix it. Nothing. I know I have something. But nothing is recovering. HELP PLEASE. Thank you

  Hi billyweeks,

  1. what Fixit did you run?

  2. you remember to make changes to the computer before this problem?

  You can read the following article and check if it helps:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549/en-us

  Hope this information is useful.

• All my files are set to read-only. The files are not.

  All records are all my disks are set to read-only. This includes my drive c, d Bank, e-reader and my backup drive.

  The files contained in these files are not read-only. How I found out about it, was that I tried to copy / paste a file from one directory to another last night and it was not authorized. Please keep in mind that I am logged on as administrator. There is only one user, me.

  I ran a recent analysis of spyware, virus scan and checked the permissions of users. I unchecked the read-only installation and reset my pc and it still comes up read-only.

  This causes a major problem.

  Hi kadesigns,

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7
  

  http://support.Microsoft.com/kb/326549

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Files read-only on the network.

  Hello.  I use Windows 7 Pro 64 bit.  I have a home network with a second computer (Win XP pro) configuration.  My problem with my Windows 7 computer.  I can create and modify files it contains very well.  However when I access those files on the network, EITHER from the 2nd computer the same computer (which is connected to the computer 1, from computer1, via the network) they open read-only.  The curious symptom is that the files are read-only even when I connect to computer 1 to Computer1.  Any thoughts on this problem?

  -Files are not selected in their properties read-only.

  -There is only 1 account for both computers on the network, and this user is a member of the Administrators group.

  -This happens for all files.  I found an article about a known problem similar to Excel files.  I followed the instructions in this article, does not.

  -What happens when the files are located in C:\temp, C:\Users\\Desktop\temp and Documents C:\Users\Public\Public (supposed to be a shared folder).

  Any help would be great.

  Hello

  Check the authorization/security.

  Problems of permission and security with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• How to use the same point of view as read only in the ADF and editable

  Hello

  How to use the same point of view as read only in the ADF and editable? How can we succeed in TF?

  -James

  Hello

  Steven Davelaar wrote a presentation on this 'building highly reusable Taskflows.

  From slide 14, that's where your use case comes into play

  Frank