tablespace and data files not synchronized

Similar Questions

• Transportable tablespaces and data files

  Hello

  I wonder if the following is possible.

  With the help of 11.2.0.3

  Export datapump job to export an entire table every day to dumpfile daily functioning

  Then, slide old partitions for example 1 day

  About destination databased days later (imgaeine 4) if need import current dumpfile and datafile for the affected tablespace that will import the deleted partition (that is, the 1st day

  Thank you

  I'm a little confused as to what you're asking, but since you're on 11.2.0.3 you have called transportable table mode.  You can export a single partition of a table using transportable tablespace data movement.  It helps a lot when you create a new storage space for each partition.  It also works if you do not have, but there are a lot of additional data you need to store.  Let me give you an example:

  table foo with:

  partition 1 - tablespace 1 - day 1

  partition 2 - tablespace 2 - day 2

  partition 3 - tablespace 3 - day 3

  partition 4 - tablespace 4 - day 4

  If you were to run this export:

  tables of user/password = foo:partition1 transportable expdp = always dumpfile = foo_part1.dmp...

  you would get a dumpfile with just partition1.  You must save the dumpfile and the data file if you ever need to restore.  To restore it, run a command like:

  Impdp username/password DB11G = dumpfile = foo_part1.dmp...

  It would be important only the partition, and it would create a table called foo_partition1.  You can then use the swap partition to put back in the table where you need restored.

  If all of these scores have been in the same table, you could do the same thing for export and import, but you would need to keep a copy of the dumpfile with a copy of the storage space for every day.  Then

  day 1 - would thus dumpfile datafile with just data from day 1

  day 2 - would thus dumpfile data file with data from day 1 and the day2

  day 3 - would thus dumpfile datafile on day 1, day 2 + data of the day 3

  etc.

  The reason for this is because the import checks that the tablespace that has the same features when it was exported.  It uses a checksum or something to verify this.  So, if you've added data to day 2, the data file would not be the same and the import fails.

  I hope this helps.

  Dean

• I restored the password of Firefox Sync and data are not synchronized.

  I reinstalled Windows and downloaded Firefox, but forgot the password synchronization. Restore successfully, I logged into my account. But the synchronization only has not occurred. Other devices synced are not available. Can I recover the data somehow?

  When you request a new password to sync, your data are deleted from the synchronization server.

• . Error... my clock and date does not work...

  Hello

  my clock and date does not, that why I can't update my pc or I can not install updates... Please help me

  Thank you.

  Do you mean that you can not set the date & time on the tray system 'clock '? Or you can, but it changes when you reboot the machine?

  It is a laptop or desktop?

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• a backup controlfile and data files but not archive file db 11 g xe

  a backup data files and controlfile but not to redo file db is r2 xe 11g... was trying to backup closed... again missed...
  
  in any case to restore the back Pb...
  I forgot to backup log file...
  DB has been closed... properly
  much appreciated info.
  see you soon
  
  Published by: zycoz100 on February 27, 2013 04:42

  I do not have these 2 files newspapers... in the destination mentioned

  Is no question, the create controlfile statement specifies redo filenames - if they do not exist, the Forum could gripe about it, but they will be created at the start of the backup database redo information.

  And if you don't like the names, this problem, which is:

  -- change:
  ... group 1 '\O1_MF_1_80L7C259_.LOG' size ... ,
  group 2 '\O1_MF_2_80L7C375_.LOG' size ...
  -- to
  'C:\oraclexe\app\oracle\oradata\XE\redo\redo01.dbf' size ... ,
  'C:\oraclexe\app\oracle\oradata\XE\redo\redo02.dbf' size ...
  -- if you want three redo files that's fine too- add  group 3 ...
  , group 3 'C:\oraclexe\app\oracle\oradata\XE\redo\redo03.dbf' size ... 
  

  You will have to make the folder "remake", part complete must be a valid directory. The "out of the box" installation program in the tenth place redo files in the flash recovery area. And FRA imposes an arbitrary size limit, 10 GB, I think. Better to point files redo to a different folder, not in the location of the FRA.

  Redo files can also have several members, for extra protection. If at least one member of a group of redo is integrated the database will continue to run. Specify additional members with:

  group 1 ( '\redo01.dbf', '\redo01.dbf' ) size ... ,
  group 2 ( '\redo02.dbf', '\redo02.dbf' ) size ... ,
  group 3 ( '\redo03.dbf', '\redo03.dbf' ) size ... 
  

  I always name the files redo with an extension .dbf, at one point, there was a system administrator I looking a little too aggressive log files that "had to be cleaned up to save space.

  Good for him, he has released a few MB of disk space.

  Bad for me, the instance crashes as soon as he tried to write in a missing file again.

• Data file not shipped from the primary database to the standby database

  Hello
  
  (1) create a new user
  (2) created a new table space and add datafile on the primary database
  (3) the value tablespace default user
  
  But so far, this new data file is not delivered on the standby database.
  
  Version of database - 10.2.0.3
  OS - Windows
  
  Setting of primary and Standby: -.
  
  SQL > show parameter standby_file_management;
  
  VALUE OF TYPE NAME
  ------------------------------------ ----------- ------------------------------
  standby_file_management string AUTO
  
  Both have the same file system, but the difference is case sensitive.
  
  Primary data file location - D:\testdata
  
  Location of file data at rest - D:\TESTDATA
  
  Help, please.

  MRP process is running on the standby database?

  If it is then try to pass, log on the primary database and share your result.

• segments and data files

  can someone clarify me the following...
  
  If a table space includes a number of segments... is that true
  
  -A table space can contain a number of files, each consisting of a number of segments of. ?
  
  Also when a table partitioning is involved,... lets say partition us a table on two separate drives,... a segment would be placed in a data file on disc one and the other segment placed in a data file on disk B... but where information held relating to the global table (if that makes sense... that is to say where would hold information on partitions ,, ?)
  
  Any help would be appreciated

  -A table space can contain a number of files, each consisting of a number of segments of. ?

  True and true half. Segments in a tablespace may extend in all, part or all of the data in this table files. User has no command to specify what datafile inside a tablespace should be used for a segment.

  but where information held relating to the global table

  The attributes of the table is stored in the metadata, and it is in the SYSTEm tablespace. However, a partitioned table has a default tablespace associated with it. Partitions that you do not specify that a tablespace to go.

  Example: MP_OHDB is default tablespace of the table but each subpartition in it's own tablespace bit!

  CREATE TABLE MEM_NBR
  (
    BUSINESS_DATE  DATE,
    INSTANCE       NUMBER(5),
    LOGBAPI_NBR    NUMBER(20)
  )
  TABLESPACE MP_OHDB
  PCTUSED    0
  PCTFREE    10
  INITRANS   1
  MAXTRANS   255
  PARTITION BY RANGE (BUSINESS_DATE)
  SUBPARTITION BY LIST (INSTANCE)
  SUBPARTITION TEMPLATE
    (SUBPARTITION INSTANCE_1 VALUES (1) TABLESPACE MP_OH_GEN_P1,
     SUBPARTITION INSTANCE_2 VALUES (2) TABLESPACE MP_OH_GEN_P2,
     SUBPARTITION INSTANCE_3 VALUES (3) TABLESPACE MP_OH_GEN_P3,
     SUBPARTITION INSTANCE_4 VALUES (4) TABLESPACE MP_OH_GEN_P4,
     SUBPARTITION OTHERS VALUES (DEFAULT) TABLESPACE MP_OHDB
    )
  INTERVAL( NUMTODSINTERVAL(1,'DAY'))
  (
    PARTITION P0 VALUES LESS THAN (TO_DATE(' 2008-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
      NOLOGGING
      NOCOMPRESS
      TABLESPACE MP_OHDB
      PCTFREE    10
      INITRANS   1
      MAXTRANS   255
      STORAGE    (
                  BUFFER_POOL      DEFAULT
                 )
    ( SUBPARTITION P0_INSTANCE_1 VALUES (1)    TABLESPACE MP_OH_GEN_P1,
      SUBPARTITION P0_INSTANCE_2 VALUES (2)    TABLESPACE MP_OH_GEN_P2,
      SUBPARTITION P0_INSTANCE_3 VALUES (3)    TABLESPACE MP_OH_GEN_P3,
      SUBPARTITION P0_INSTANCE_4 VALUES (4)    TABLESPACE MP_OH_GEN_P4,
      SUBPARTITION P0_OTHERS VALUES (DEFAULT)    TABLESPACE MP_OHDB ),
    PARTITION VALUES LESS THAN (TO_DATE(' 2010-11-17 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
      NOLOGGING
      NOCOMPRESS
      TABLESPACE MP_OHDB
      PCTFREE    10
      INITRANS   1
      MAXTRANS   255
      STORAGE    (
                  BUFFER_POOL      DEFAULT
                 )
      SUBPARTITIONS 5 STORE IN (MP_OH_GEN_P1,MP_OH_GEN_P2,MP_OH_GEN_P3,MP_OH_GEN_P4,MP_OHDB),
    PARTITION VALUES LESS THAN (TO_DATE(' 2010-11-18 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
      NOLOGGING
      NOCOMPRESS
      TABLESPACE MP_OHDB
      PCTFREE    10
      INITRANS   1
      MAXTRANS   255
      STORAGE    (
                  BUFFER_POOL      DEFAULT
                 )
      SUBPARTITIONS 5 STORE IN (MP_OH_GEN_P1,MP_OH_GEN_P2,MP_OH_GEN_P3,MP_OH_GEN_P4,MP_OHDB),
    PARTITION VALUES LESS THAN (TO_DATE(' 2010-11-19 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'NLS_CALENDAR=GREGORIAN'))
      NOLOGGING
      NOCOMPRESS
      TABLESPACE MP_OHDB
      PCTFREE    10
      INITRANS   1
      MAXTRANS   255
      STORAGE    (
                  BUFFER_POOL      DEFAULT
                 )
      SUBPARTITIONS 5 STORE IN (MP_OH_GEN_P1,MP_OH_GEN_P2,MP_OH_GEN_P3,MP_OH_GEN_P4,MP_OHDB)
  )
  NOCOMPRESS
  NOCACHE
  PARALLEL ( DEGREE DEFAULT INSTANCES DEFAULT )
  MONITORING;
  

• The high water table and data files

  Hi all
  
  I just have a small question regarding high Tables in correlationi with the HWM to a data file. I have a data file that I would like to resize. At this point, I can reduce the data file of 100 GB to 70 GB which is the HWM of the data file. However, I know that I can compress probably some tables in the tablespace and assuming that these tables have extensions the datafile, will be running 'alter table shrink space,' also decrease the HWM of the data file? Or is there no correlation between the 2 HWM?
  
  Thank you.

  Note You can use alter table move and change reconstructions of index to move generally the scope used to the logical beginning of the data files. How good Oracle repacks extensions dependent measure used tablespace management and the size and order of executed moves/reconstruction. Retractable table option allocates no new extensions so it won't move that objects forward in the file.

  But again, there is very little point in trying to pack each scope to the front of the file if you cause Oracle immediately need to expand the file to store the new allowance claims. Existing free extensions in the logical HWM of the file will be reused when possible with managed tablespaces locally packaging 100% is not necessary.

  If the dictionary is indeed this reuse is more variable, but based on your previous posts, there is no need to worry about this situation.

  HTH - Mark D Powell.

• I want to delete wtf and data files, I'm the administraghiter but his application for permission

  I want to delet these 2 files but it said access denied need administraighter permission but I am the admin

  Hello

  -What is the exact wtf files and data location you want to remove your computer?
  -Did you do changes on the computer before this problem?
   
  I suggest you to follow the steps mentioned below and check if it helps:
  1.right - click on file or folder, and then choose Properties.
  2. click on the Security tab.
  3. click on Advanced, then the owner tab.
  4. click on change, then your user name (make sure to check Replace owner subcontainers..).
  5. click on apply, and then click OK.
  6.now, under permissions, click on change permissions.
  7. click Add, and then type your user name and click on OK.
  8 check the box allow under full control, then click on OK.
  9. now, choose the replace all the CheckBox child permission.
  10. click on OK, then apply, then on Close.

  If it's system files, I suggest you don't not to remove files.

  Hope this information helps.

• Cache buffers DB, file Cache Redo, DBWR, LGWR and log and data files

  Hi all Experts,
  
  I m very sory for taking your time to a matter of very basic level. in fact, in my mind, I have a confusion about the DB buffer cache and the cache of log buffers
  My question is in the DB buffer cache are three types of dirty, pinned and free i-e data. and in Sales, they are all changed data data and are willing to empty in DBRW. and then he write data files.
  
  but again bufers also works for the CDC and all the changed data is temporaryliy chacheed bufers redo and the LGWR writes in the log files. and these data can be data are committed or not. and when the log switch is held, then it writes data to data files commited
  
  My question is that if a log file may have committed data type and stop and when a log switch takes place then only the data are committed are transferred to datafiles, then where are the data no go?
  
  
  If dirty pads also contain modified data so wath is the diffrence between the bufers and data log data incorrect.
  
  I know that this can be funny. but I m maybe wrong abot the concept. Please correct my concept about this
  
  Thank you very much
  
  Kind regards

  user12024849 wrote:
  Hi all Experts,

  I m very sory for taking your time to a matter of very basic level. in fact, in my mind, I have a confusion about the DB buffer cache and the cache of log buffers

  The first thing we do not mention this newspaper stamp in the log buffer cache. It won't make a difference to even call it that, but you should stick with the term normally used.

  My question is in the DB buffer cache are three types of dirty, pinned and free i-e data.

  Correction, it is the States of the buffer. These aren't the types. A buffer can be available in all of these three States. Also, note even when you would select a buffer, his first PIN before it can be given to you. Apart from this, there is a type more State called instant capture buffer aka CR (coherent reading) buffer that is created when a select query arrives for a buffer inconsitent.

  and in Sales, they are all changed data data and are willing to empty in DBRW. and then he write data files.

  Yes, that's correct.

  but again bufers also works for the CDC and all the changed data is temporaryliy chacheed bufers redo and the LGWR writes in the log files. and these data can be data are committed or not.

  That is partially right. The buffer which is written by DBWR in the data file is a full buffer while in the log buffer, it is not the entire block that is copied. Oracle enters the log buffer called vector of change . It's actually the representation of this change that you made in the data block. It is the internal representation of the change that is copied into the log block and is much smaller in size. The size of the buffer of paper compared to the buffer cache is much smaller. What you mentioned about the writing of written data room again or not committed is correct. His transactional change that needs to be protected and therefore is almost always written in the restore log file by progression of the LGWR.

  and when the log switch is held, then it writes data to data files commited

  Fake! To the command log, Checkpoint is triggered and if I'm wrong, its called point of control of thread . This causes DBWR write buffers dirty this thread in the data file regardless of whether or not they are committed.

  >

  My question is that if a log file may have committed data type and stop and when a log switch takes place then only the data are committed are transferred to datafiles, then where are the data no go?

  As I explained, it is not only the validated data are written to the file data but committed and not committed is written.

  If dirty pads also contain modified data so wath is the diffrence between the bufers and data log data incorrect.

  Read my response above where I explained the difference.

  I know that this can be funny. but I m maybe wrong abot the concept. Please correct my concept about this

  No sound is not funny, but make sure that you mix in anything else and understand the concept that he told you. Assuming that before understanding can cause serious disasters by getting the concepts clearly.

  Thank you very much

  HTH
  Aman...

• time and date do not update automatically

  So I installed windows 8, there is not that long and I notice that my time still stuck after some time and I have to re - sync all the time. This gets really annoying. What can I do to fix this?

  Hi GadyBarak,

  Thanks for posting your question in the Microsoft community forum!
   
  Here are some steps that you can follow
  Method 1:
  Check the status of service time Windows.
  a. the office window, press windows + R
  b. type services.msc in the run window.
  (c) in the services window find 'windows time' and double-click it.
  d. If the service status is stopped, click Start, and then press ok.
   
  Method 2:
  Check if the date and the time zone is set correctly
   
  Try to restart the time service windows and check
  a. click on display time and date in the lower right corner.
  b. Select the internet time tab, and click on change settings and click Update now and press ok.
   
  Method 3:
  Check if the time is set in the Bios from the manual of the computer.

  If you are not comfortable to go to the Woods, contact the manufacturer of the computer

  If you still have questions, contact the manufactutrer from the computer and get the cmos, battery check.

   

  Note: changing the BIOS / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

   

  Hope this solves the problem. You can write back us if the problem persists and we will be happy to help you.

   

   

   

   

• Index and data files

  You can store the Page and Index file on different drives? If Yes, how to make the change, and when in the process of creation of the app?
  
  
  (App 11.1.2 native Essbase version)
  
  Thank you!
  
  -Monica J

  You can store them on different drives. Would be a right click on the database name and select Edit properties. Go to the storage tab and select the drive that you want everyone to be on. If there is already data in the database, to get on the new discs, you must export the data and then stop and reformulate the request.

• Time and date does not not on the lenovo yoga 2 pro

  Lately the time and date on my Lenovo yoga 2 pro are always off by one day and one hour. Even when I change back to normal date and time manually, they return to the incorrect date and time. How can I fix?

  Turn off your computer. Press the button (the small button next to the power button) OKR. Select BIOS > set the date and the correct time.

• DROP TABLESPACE TIVOLIORTS INCLUDING CONTENT AND DATA FILES;

  How can I do it's 8i?

  Unless the storage space is already empty, you will still need to syntax "including the content. If there is any referential integrity between objects in this ts and others, you must the syntax 'constraints cascading:

  Drop tablespace tivoliorts including content of cascade constraints;