Two-processor Multi Core processing Parrell Question

Similar Questions

• Tecra A9: Cannot enable or disable Multi Core processing in the BIOS

  I have a Tecra A9 and want to swicht out of the Multi Core Processing in the Bios, but it is impossible.

  To the old Bios version (1.50), it has been possible.

  Now I use the most recent (2.10) and I can't move the cursor to this selection.

  The special key strokes?

  If this isn't the case - where can I download the previous version of the bios where this selection is possible?

  Thank you

  Ulli

  Hello

  > Otherwise - where can I download the previous version of the bios where this selection is possible?
  This is not possible because it is always the newest available BIOS can be downloaded.

  With regard to the option in the BIOS.
  Do you mean you are not able to choose this option or you can't change the value?

  Toshiba BIOS:
  Usually the buttons PgUp / PdDn would change the BIOS page. The arrow buttons to select items. SPACE or BkSp can be used to change the values.

  But note; You can only change the value if it s interchangeable. But many options appear in the BIOS but is not editable.

• What happens if there is multi-core or Dual-Core coupling processors to the top with Windows 7 Home Premium?

  So if I have a Windows7 Home Premium 64 - bit operating system and I use a processor dual core (Intel Dual Core e5300 CPU) are fully compatible or how they work together, given the fact that Windows 7 recognizes that one of the two processors? Playback of the system is expressed in the fact that it has two current processors. Both processors work simultaneously to form a combined data stream is a dormant or they turn on and off opposing to another so that each works half the time? Many scenarios as possible, but I would like to know... the real answer as to what needs to be changed eventually to bring together a system more fluid? My main question is the operating system and the processor may be an incompatibility problem that has not yet been addressed? I can't find any answer in the Center Compatabiity of Windows 7 or anywhere else. Or is the limitation of windows 7 Home Premium and only be able to support an unfounded processor see the fact that there are many systems that are in work today with these components. ?

  Hey Randy,

  If your system has two separate physical processors (not hearts) and you are running Windows 7 Home Premium, the second processor is completely ignored. It turns on and turn his fans, but it does not all rights for the computer. Windows 7 Home Premium will not take advantage of a single processor.

  However, if you have a single physical processor with multiple cores, Windows 7 64-bit will benefit from up to 256 cores. It is very probably the type of machine that you have because it is quite rare to have multiple processors co-location in a workstation computer.

  In this scenario, Windows will use two cores for separate tasks. Applications will be evenly distributed between the carrots, unless the application has been written to take advantage of multiple cores. The two hearts are turned on and both are used when the system is running.

  You can check if Windows has recognized the two hearts looking Manager of the tasks of your system:

  1. Open the Task Manager by right-clicking the taskbar, and then click Start Task Manager.
  2. Click the performance tab.

  

  The top two graphs show how much CPU is used, as well at the moment and for a few minutes. If the CPU usage history graph seems shared, your computer has multiple processors, a single dual-core CPU or both.

  Windows 7 system requirements also go in a little more detail on how many windows cores/processors can take in charge:

  http://Windows.Microsoft.com/systemrequirements

  Hope this helps to answer your question!

• PES 10 times Organizer and editor crash on multi-core hardware. set the processor affinity unique mode fixed

  As I pointed out in thread http://forums.Adobe.com/thread/941128 I found the editor and organizer for PES 10 crash in basic multi environment, I'm WIndows 64 bit, latest updates (including sp1), I had the same problems with Windows 7 32-bit.

  Workaround is to set the affinity to a single processor.  From the Task Manager, select the "processes" tab, find the exe (for example PhotoshopElementsOrganizer), right click, select "set affinity...". "and reduce the number of CPUS selected (checked) for a single.  (Under different versions of Windows specific means vary, but the basic steps are the same).  It doesn't matter what cpu choose you, but if you are the editor and organizer, put it on different processors.

  Pretty much everything these days being multi-core material, my hypothesis is that Adobe test in a virtualized environment and therefore do not discover this type of unreliabillity.  Adobe really need to test their software further exactly the same problem exists in PSE 6, is hardly new to them.

  The solution is in what precedes.

  If Adobe read this, they should take note that a virtualized environment does not provide a decent systems CPU multi-core fidelity emulation.  The ONLY way to test the reliability of an application is on REAL hardware.

• XW6400 problem two processors with four cores

  I have a XW6400 who I am rebuilding as a gift for a friend. The thing is brand new and never been used.

  My problem... First record:

  Dual Xeon 5130

  8Gb Ram 2RX8

  Asus GT740 1 GB graphics card

  PCI-e USB card 3

  StarTech Sata III PCI - e card (ready for SSD)

  Win 7 Ultimate 64 bit

  BIOS 2.38

  1 TB WD Caviar Black HARD drive

  I managed to get their hands on two Xeon 5410 but after their installation, all that I get out the monitor is... "Power save mode, press any key or move the mouse"... neither of which has no effect.

  However, when I put the 5130's back in, it fires quite happy.

  I have built a certain PC in the past (including another XW6400) but this problem is quite a head scratcher.

  Thanks in advance.

  Rob.

  Rob,

  Don't scratch no more.  You try to load a Xeon Quad Core for a xw6600 in a xw6400.  In theory, you might think that it will work.  It will not... the only processors Attaché who work are listed in the QuickSpecs for the xw6400,.  It has to do with the "section of the BIOS firmware, which includes a white list of specific processors that are allowed.  The quad core Xeon desired is E5345, last sSpec code (SLAEJ), on eBay.  Buy one and if we're going to work, then you can add a second.  I have a 'well known' an in my stash, but practically all I bought used off eBay work very well.

  There are about 10% of the mothers xw6400 who cannot run this processor, and in this case, I have two of the fastest dual core Xeon running in the list, the E5160, last sSpec code (SLAG9).

  I would recommend running the Intel X 25 - M 160 GB or 320 series 160 or 300 GB, used off eBay.  Run firstly through DBAN, then long NTFS format.  Use W7Pro 64-bit or Ultimate 64-bit and load properly with the little ones and the primary partitions.  These particular Intel SSDS are very fast, corresponds to plug SATAII chipset and use the latest version of the Intel Toolbox.  Your WD is a nice document reader.

  You can run the card USB3 of TI of HP, I posted here and a great way to get an output of 2 x 2 (two ports on the back, two in the front) is detailed.  The xw6600 allows you to get the full speed of the slot machine video PCIe x 16 second for USB3, but the xw6400 limits you to 1/2 full speed because of its use of the PCIe gen 1 rather than gen 2 slots for this card.

  I would stick as much as possible with the help of what is on the motherboard, rather than load a bunch of useless cards to get things running and stabilized.  You need not of USB3 and SATA gen III for your friend to have a solid rock and great user experience.

  All the information is here...

  Very nice of you to help your friend.  This new xw6400 has always good life in it, especially if you can do two processor E5345 SLAEJ.  Or, two of the E5160s.

  Favorite good cheap used video card: Quadro FX1800, any OEM and the HP firmware update on this subject.

• NB100 - multi-core of BIOS settings & battery discharge while off

  Hello, I bought the N100-R there are several monts. The unit is very reliable, but when taking take a closer look at the settings of the bios a few days ago I noticed that the multi-core enabled, while the processor is a single-core. After turning off I found that the drive produces some frequent hickups so intense, that the cursor starts jumping.
  Overall performance seems to be less catchy with multi-core disabled.
  The logs say nothing about the problem of hard drive, so I made a recovery today including about 168 updates in a row (as a nice side effect the update manager seem to be able to find the files of package again, which was not the case for two weeks or more).
  My question is, why the multi-core is enabled on a machine simple heart?

  The biggest problem is the issue of discharge while the device is in standby mode or even turned off.
  Some entries to mention this issue recommending upgrades the core among others), and I wonder if Toshiba is about to face in the near future.
  Here, even once, I played with the settings of the bios and disabled option wake-up-on-lan, such as recommended, however nothing has changed.
  Thanks in advance.

  Although single-core CPU, I thought they were hyperthreading (with what looks like two hearts to the BONE). In this case I guess that this setting disables hyperthreading?

  168 updates? What is the first set of updates never applied? Sounds like a lot!

• LabVIEW 8.6.1 AMD Multi Core Crash with call loops

  Hi all

  I tried, but I couldn't find all the messages with my exact situation.  Here it goes:

  I have a multi-core AMD Phenom 64 processor and I'm running Windows 7 64 and I am running an application in LabVIEW 8.6.1 in compatibility mode.  (I know, not a good idea)  I have a pretty complex application with several timed loops and the different ways to talk to FieldPoint (FieldPoint 6.0.6 and experimentation with Modbus talk to cFP-180 x).  You may be wondering why I'm using call loops.  It is an application of RT which can also run on Windows using structures conditional disable, etc.

  I had met sporadic crashing earlier in my files executable for more than a year and used a lvalarms.dll in only patched version my executables.  It was on a totally different processor and we were running Vista at that time.  Now, I notice a very similar behavior on 8.6.1, except now the development environment all crashes or breaks down my executable compiled as well.

  I found this KB, but he was referring to problems observed on LabVIEW 8.5, and the utility of the OS is only for Windows XP.  As recommended in the KB, I used BCDEdit to set the flag onecpu and now everything seems to work normally.  My PC is now significantly slower, however, and I wonder if there is another workaround solution that I might be able to try.

  If you have read so far and who have followed my description you already have my gratitude.  If anyone else has experienced this?  Someone at - it ideas?

  Thank you very much

  Jim

  Alright.  In case someone else runs into this apparently dark scenario, here's workaround solutions I've found:

  1. see if the problem goes away by setting the processor affinity using the Task Manager. Open the Task Manager, look under the "Processes" tab and right-click on the process. (for example LabVIEW.exe or your executable)  Under the context menu which select "set affinity...". "and select only the CPU 0.  In my case, I have a quad-core processor, so I up to four logical processors that are displayed in the dialog box that results.

  Run your application code or the executable file for a while, and if everything seems to be stable, it would seem that you have isolated the problem successfully.

  2. one of the solutions is to disable additional logical processors for the entire operating system, although there may be negative implications on performance.  In this case, try the steps in the lower part of this KB.  I have Windows 7, so I used the utility of command-line bcdedit with no problems.

  3. Finally, a really interesting option that is well worked for me should automatically set the affinity of the processor for each individual process.  There is at least a utility available to achieve this.  I've now changed my LabVIEW 8.6 shortcut to call RunFirst, which sets the processor affinity for LabVIEW to automatically use the first logical processor.  This way I can still use my processor image for all it's worth except in applications that have problems with it.

  I hope this helps someone else out there one day.

  Jim

• How can I configure a program to run on only one heart of my multi-core computer?

  Hello

  I have a multiple basic computer, except a very processor that is only designed to run on one heart program (maybe you have heard of him; Dwarf Fortress. Otherwise, it is not really necessary, but good). Now I wonder, how can I set the program to run only on a single heart, whenever I start it? I have a shortcut on my desktop, so if it is not possible to change the parameters of the program or other stuff like in Windows itself, I don't have the ability to change the shortcut to make it work on a carrot.

  Hello Drake1500,

  Thank you for using the Microsoft Windows Vista Forums.

  Since given as each program/software is configured differently to work on mulit or transformation of a nucleus there is nothing that Vista can do to change that.  You need to change something in the formula of the show itself.  I enclose a link below which talks about this issue.  Please let me know if you have any other questions.

  http://msdn.Microsoft.com/en-us/magazine/cc163340.aspx
  Optimize Managed Code for Multi - Core Machines James Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• Can't find a Post processor of post-processing application output service

  Hi experts,

  
  

  Users complaining that they could not able to generate the PDF file.

  
  

  The claim of the user:

  The program does not generate the PDF file. The program generates just the XML output. The log file indicates that 'Impossible to find a Post processor of post-processing output service application' 25852905

  
  

  EBS: 12.1.2

  OS: RHEL 5.5

  DB: 11.1.0.7.0
  

  
  

  
  

  Steps we tried:

  
  

  1. increase the process of the OPP to 16

  2. simultaneous increase: OPP Response Timeout to 750

  3. There is no problem in the log manager.

  4 concurrent requests fail because the output of post-processing (OPP) Timeout (Doc ID 352518.1()
  

  5 restarted Ran CM. CMclean.

  6 re: output post-processing of assembly

  7.unable to View output pdf file created by the XML editor

  
  

  
  

  But we find no solution to the foregoing.

  
  

  
  

  Journal:

  
  

  +-----------------------------

  | Starting the competitor program...

  +-----------------------------

  Arguments

  ------------

  p_order_by = "TRX_NUMBER".

  p_trx_number_low = '8414037'

  p_trx_number_high = '8414037'

  p_open_invoice = 'n'

  p_check_for_taxyn = 'n'

  p_choice = 'SALT '.

  p_header_pages = '1'

  p_debug_flag = 'Y '.

  p_message_level = '10'

  ------------

  Obliging NLS_NUMERIC_CHARACTERS to: '.,' for the treatment of OPE

  NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are:

  American_America.US7ASCII

  '.,'

  Enter the password:

  REP-0004: WARNING: could not open the file of user preferences.

  MSG-00100: DEBUG: AfterPForm_Trigger +.

  MSG-00100: DEBUG: Multi Org established.

  MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details

  MSG-00100: DEBUG: Get_Country_Description.

  MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug

  MSG-00100: running in debug mode

  MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low

  MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High

  MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option

  MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date

  MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause

  MSG-00100: DEBUG: P_Choice: SALT

  MSG-00500: DEBUG: about to build the WHERE clause.

  MSG-00500: DEBUG: built WHERE clause.

  MSG-00100: DEBUG: choice differs from ADJ, definition ORDER BY.

  MSG-00500: DEBUG: table 1: AR_ADJUSTMENTS COM_ADJ,.

  AR_PAYMENT_SCHEDULES P,.

  REC RA_CUST_TRX_LINE_GL_DIST,

  RA_CUSTOMER_TRX, A.

  B HZ_CUST_ACCOUNTS,

  RA_TERMS                               T,

  RA_TERMS_LINES TL,

  TYPES OF RA_CUST_TRX_TYPES,

  AR_LOOKUPS L_TYPES,

  HZ_PARTIES LEFT,.

  HZ_CUST_ACCT_SITES A_BILL,

  HZ_PARTY_SITES PARTY_SITE,

  HZ_LOCATIONS LOC,

  HZ_CUST_SITE_USES U_BILL

  MSG-00500: DEBUG: table 2: RA_TERMS_LINES TL,.

  TYPES OF RA_CUST_TRX_TYPES,

  AR_LOOKUPS L_TYPES,

  B HZ_CUST_ACCOUNTS,

  HZ_PARTIES LEFT,.

  HZ_CUST_SITE_USES U_BILL,

  HZ_CUST_ACCT_SITES A_BILL,

  HZ_PARTY_SITES PARTY_SITE,

  HZ_LOCATIONS LOC,

  AR_ADJUSTMENTS COM_ADJ,

  RA_CUSTOMER_TRX, A.

  AR_PAYMENT_SCHEDULES P,.

  RA_TERMS                               T

  MSG-00500: DEBUG: where 1: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID

  AND REC CUSTOMER_TRX_ID = A.CUSTOMER_TRX_ID.

  AND REC. LATEST_REC_FLAG = 'Y '.

  AND REC. ACCOUNT_CLASS = "REC".

  AND P.PAYMENT_SCHEDULE_ID + (P.CLASS DECODE,

  'INV', 0,

  '')

  = COM_ADJ. PAYMENT_SCHEDULE_ID (+)

  AND COM_ADJ. SUBSEQUENT_TRX_ID IS NULL

  AND 'C' = COM_ADJ. ADJUSTMENT_TYPE (+)

  AND A.COMPLETE_FLAG = 'Y '.

  AND A.CUST_TRX_TYPE_ID = TYPES. CUST_TRX_TYPE_ID

  AND L_TYPES. LOOKUP_TYPE = ' INV/CM/ADJ.

  AND A.PRINTING_OPTION ('PRI', 'REP')

  AND L_TYPES. LOOKUP_CODE =

  DECODE (TYPES. TYPE "DEP", "INV" TYPES. TYPE OF)

  AND NVL (P.TERMS_SEQUENCE_NUMBER, nvl (TL. SEQUENCE_NUM, 0)) = nvl (TL. SEQUENCE_NUM, NVL(p.terms_sequence_number,0))

  AND DECODE (P.PAYMENT_SCHEDULE_ID, ", 0, NVL(T.PRINTING_LEAD_DAYS,0)) = 0

  AND A.BILL_TO_SITE_USE_ID = U_BILL. SITE_USE_ID

  AND U_BILL. CUST_ACCT_SITE_ID = A_BILL. CUST_ACCT_SITE_ID

  AND A_BILL.party_site_id = party_site.party_site_id

  AND B.PARTY_ID = OFF. PARTY_ID

  AND loc.location_id = party_site.location_id

  AND NVL (LOC. LANGUAGE, 'US') = 'EN '.

  AND A.TERM_ID = TL. TERM_ID (+)

  AND A.TERM_ID = T.TERM_ID (+)

  AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID (+)

  MSG-00500: DEBUG: where 2: A.BILL_TO_CUSTOMER_ID = B.CUST_ACCOUNT_ID

  AND P.PAYMENT_SCHEDULE_ID + (P.CLASS DECODE,

  'INV', 0,

  '')

  = COM_ADJ. PAYMENT_SCHEDULE_ID (+)

  AND COM_ADJ. SUBSEQUENT_TRX_ID IS NULL

  AND 'C' = COM_ADJ. ADJUSTMENT_TYPE (+)

  AND A.COMPLETE_FLAG = 'Y '.

  AND A.CUSTOMER_TRX_ID = P.CUSTOMER_TRX_ID

  AND A.CUST_TRX_TYPE_ID = TYPES. CUST_TRX_TYPE_ID

  AND L_TYPES. LOOKUP_TYPE = ' INV/CM/ADJ.

  AND A.PRINTING_OPTION ('PRI', 'REP')

  AND L_TYPES. LOOKUP_CODE =

  DECODE (TYPES. TYPE "DEP", "INV" TYPES. TYPE OF)

  AND NVL(T.PRINTING_LEAD_DAYS,0) > 0

  AND A.BILL_TO_SITE_USE_ID = U_BILL. SITE_USE_ID

  AND U_BILL. CUST_ACCT_SITE_ID = A_BILL. CUST_ACCT_SITE_ID

  AND A_BILL. PARTY_SITE_ID = PARTY_SITE. PARTY_SITE_ID

  AND B.PARTY_ID = OFF. PARTY_ID

  AND LOC. LOCATION_ID = PARTY_SITE. LOCATION_ID

  AND NVL (LOC. LANGUAGE, 'US') = 'EN '.

  AND NVL (P.TERMS_SEQUENCE_NUMBER, TL. SEQUENCE_NUM) = TL. SEQUENCE_NUM

  AND T.TERM_ID = P.TERM_ID

  AND TL. TERM_ID (+) = T.TERM_ID

  MSG-00100: DEBUG: AfterPForm_Trigger -.

  MSG-00100: DEBUG: BeforeReport_Trigger +.

  MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option

  MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option

  MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details

  MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.

  MSG-00100: DEBUG: Organization Id: 26

  MSG-00100: DEBUG: BeforeReport_Trigger -.

  MSG-05000: DEBUG: Trx No.... 8414037

  MSG-00100: DEBUG: Get_Country_Description.

  MSG-00010: 12:03 1 Transaction: 8414037

  MSG-00100: DEBUG: Get_Country_Description.

  MSG-00100: DEBUG: Get_Country_Description.

  MSG-05000: DEBUG: deliver to the address...

  MSG-05000: DEBUG: tackle the Style:

  MSG-05000: DEBUG: address 1: 11000 NORTH IH-35

  MSG-05000: DEBUG: address 2:

  MSG-05000: DEBUG: address 3:

  MSG-05000: DEBUG: address 4:

  MSG-05000: DEBUG: City: AUSTIN

  MSG-05000: DEBUG: County:

  MSG-05000: DEBUG: State: TX

  MSG-05000: DEBUG: Province:

  MSG-05000: DEBUG: Postal Code: 78753

  MSG-05000: DEBUG: territory:

  MSG-05000: DEBUG: Country_Code: U.S.

  MSG-05000: DEBUG: client name:

  MSG-05000: DEBUG: Bill:

  MSG-05000: DEBUG: first name:

  MSG-05000: DEBUG: family name:

  MSG-05000: DEBUG: Mail Stop:

  MSG-05000: DEBUG: country Code: U.S.

  MSG-05000: DEBUG: country Desc:

  MSG-05000: DEBUG: print flags home: N

  MSG-05000: DEBUG: width: 40

  MSG-05000: DEBUG: minimum height: 6

  MSG-05000: DEBUG: Max height: 6

  MSG-05000: DEBUG: back to formatted...   11000 NORTH IH - 35

  AUSTIN, TEXAS 78753

  MSG-05000: DEBUG: Bill to address...

  MSG-05000: DEBUG: tackle the Style:

  MSG-05000: DEBUG: address 1: 2481 ROSS CRES.

  MSG-05000: DEBUG: address 2:

  MSG-05000: DEBUG: address 3:

  MSG-05000: DEBUG: address 4:

  MSG-05000: DEBUG: City: NORTH BATTLEFORD

  MSG-05000: DEBUG: County:

  MSG-05000: DEBUG: State:

  MSG-05000: DEBUG: Province: SASKATCHEWAN

  MSG-05000: DEBUG: Postal Code: S9A3R3

  MSG-05000: DEBUG: territory:

  MSG-05000: DEBUG: Country_Code: CA

  MSG-05000: DEBUG: client name: VAUGHN FAUTH

  MSG-05000: DEBUG: Bill:

  MSG-05000: DEBUG: first name: VAUGHN

  MSG-05000: DEBUG: family name: FAUTH

  MSG-05000: DEBUG: Mail Stop:

  MSG-05000: DEBUG: country Code: U.S.

  MSG-05000: DEBUG: country Desc:

  MSG-05000: DEBUG: print flags home: N

  MSG-05000: DEBUG: width: 40

  MSG-05000: DEBUG: minimum height: 8

  MSG-05000: DEBUG: Max height: 8

  MSG-05000: DEBUG: Bill to the format... VAUGHN FAUTH

  VAUGHN FAUTH

  2481 ROSS CRES.

  NORTH BATTLEFORD SASKATCHEWAN S9A3R3

  Canada

  MSG-05000: DEBUG: ship to address...

  MSG-05000: DEBUG: tackle the Style:

  MSG-05000: DEBUG: address 1: 2481 ROSS CRES.

  MSG-05000: DEBUG: address 2:

  MSG-05000: DEBUG: address 3:

  MSG-05000: DEBUG: address 4:

  MSG-05000: DEBUG: City: NORTH BATTLEFORD

  MSG-05000: DEBUG: County:

  MSG-05000: DEBUG: State:

  MSG-05000: DEBUG: Province: SASKATCHEWAN

  MSG-05000: DEBUG: Postal Code: S9A3R3

  MSG-05000: DEBUG: territory:

  MSG-05000: DEBUG: Country_Code: CA

  MSG-05000: DEBUG: client name: VAUGHN FAUTH

  MSG-05000: DEBUG: Bill:

  MSG-05000: DEBUG: first name:

  MSG-05000: DEBUG: family name:

  MSG-05000: DEBUG: Mail Stop:

  MSG-05000: DEBUG: country Code: U.S.

  MSG-05000: DEBUG: country Desc:

  MSG-05000: DEBUG: print flags home: N

  MSG-05000: DEBUG: width: 40

  MSG-05000: DEBUG: minimum height: 8

  MSG-05000: DEBUG: Max height: 8

  MSG-05000: DEBUG: Ship To in the format...   VAUGHN FAUTH

  2481 ROSS CRES.

  NORTH BATTLEFORD SASKATCHEWAN S9A3R3

  Canada

  Builder: release 10.1.2.3.0 - Production the kill Sep 25 12:03:07 2013

  Copyright (c) 1982, 2005, Oracle.  All rights reserved.

  +---------------------------------------------------------------------------+

  Beginning of the FND_FILE log messages

  +---------------------------------------------------------------------------+

  +---------------------------------------------------------------------------+

  End of the FND_FILE log messages

  +---------------------------------------------------------------------------+

  +---------------------------------------------------------------------------+

  Options, AutoComplete, the request for enforcement.

  +------------- 1) PUBLISH -------------+

  Could not find output service Post processor of post-processing application 25854362.

  Verify that the Post processor output service is running.

  +--------------------------------------+

  +------------- 2) PRINT   -------------+

  Does not print is not the output of this application because the post-processing has not.

  +--------------------------------------+

  End of query options AutoComplete.

  +---------------------------------------------------------------------------+

  Simultaneous request ended

  
  

  Peut - one please guide me for this question. ?.

  
  

  Thank you

  Verhasselt
  

  
  

  
  

  
  

  Hussein,

  Finally my question was solved using the underside of doc,

  How to purge Fnd_AQ Tables (Doc ID 1156523.1)

  Thanks for your great help and suggestion.,.

  Thank you

  Vasanth.

• The host VMware workstation and multi-core CPU

  Apologies if this has already been answered, but all my research to turn questions about processors how can specify in a virtual machine. It's not what I'm after here.

  I want to know is the use of VMware workstation (v6 and v7) is available on a multi-core worksation host physical cores.

  I have a scenario where we have several virtual machines containing sensitive coding environments. The material that they are on is a little old and we don't have the time or the knowledge to recreate systems (a combination of Matlab, DSpace and some custom coding). Our only option (and we did it for a couple with success so far) is to create virtual machines of these workstations.

  Which is absolutely essential for us is the material we choose VMs on host. Virtual machines will use simple/double/processors virtual.

  In order to choose the correct hardware platform, I need to know if VMware workstation is running an instance of the virtual computer within a single processor (in this case is the reduced performace?), or if there are multithreaded and make the most of the hardware it will run on.

  (We are not welcome, never more 2 virtual machines at the same time)

  Any suggestions on material would be appreciated also. I think of something based around a core of Xeon 4-6 with 12-16 GB of RAM.

  Thank you very much

  Nick

  Correct, for laboratory/debugging and interaction VM Workstation is pretty good.

• Multi-core CPU: this is an important factor?

  Hello

  I guess the CPU multi-core is probably important. But is there a rule or guidelines? I would be grateful any entry about the experience of the use of multi-core processors in a virtual machine (as a workstation or server) environment. In all the scenarios below, we assume that the memory sharp and e/s disk are satisfactory. I would like to isolate the factor of the CPU.

  Q1. A two CPU cores is equivalent to two physical CPU core?

  Q2. Number of vs. frequency of the processor cores: which is more important to run VM? Example: 2 hearts to hearts vs 4 3 GHz to 2.33 GHz

  Q3. How is the "engine" of the virtual machine using muti-core with regard to the number of virtual machines running? Is it true to say more "better cores?

  Example 1: host has 4 cores of CPU 1, 2 running virtual machines (what a waste of CPU resources?)

  Example2: host has 4 cores of the processor 1, 6 running virtual machines

  Q4. (Phenom2, Core 2, Xeon, i7) CPU architecture: the "engine" of the VM uses these CPU everything too, or is there someone who is particularly well suited for running virtual machines?

  Thanks in advance for any help.

  Q1 - Yes - ESX/ESXi treat each heart as a logical processor and plan virtual processors to these logical processors

  T2 - both are important - the vmkernel treats views CPU as a pool of cycles - 4 2.33 GHz is a pool of 9,32 GHz while 2 x 3 GHz is a pool of 6 GHz so as long as a virtual CPU has not a complete CPU - a virtual CPU can run on one heart at a time, so a 3 GHz core will be able to provide 3 GHz to a virtual computer

  Q3 - Yes more cores is better - the 'VM engine' called the vmkernel will plan the virtual machines between all hearts - VMware recommended 4 to 8 virtual processors per core according to load - so a single quad core cpu can support 16 to 32 virtual processors according to the load

  Q4 - he use them all as well - it will benefit from new technology of virtualization being in current technology chips.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• S10 - 2 showing two processor in speedfan and Device Manager.

  Mr President, I recently noticed that my netbook S10-2, showing two processors in device (xp sp3) management. Speedfan also showing that two basic (even temperature, even its use for both). Is it possible that my netbook not have double heart but two core processor. Or it's just a bug. My netbook is Intel Atom n280, intel gma 950, 1 GB ram, 160 GB hard drive. I want to upgrade to Windows 7 Ultimate edition 32 bit. If it will run smoothly or not? I don't want to move my ram to 2 GB. Thank you.

  Hello..

  (1) if it is possible to reduce the video memory through the bios?

  No use of chipset intel grafics vary on request 8 MB - 224

  (2) can we install any os on S10 - 2 through its card reader internal memory (for the particular operating system Starter memory card)? or I have to use a flash drive? You can use almost all the 32-Bit operating system... A vast Distris Linux, Windows XP/Vista/Windows 7... I prefer via flashthumbdrive...

  (3) and a practical question to my knowledge, how many hours in a day I can keep my S10-2 on battery or plugged? If you want to use the machine, most of the time connected...

  then remove the battery (to save the life of the cells).

  I used my S10e on 72 continuous hours running... without. the quirks... plugged...

  cordially KalvinKlein

• Any version later than version 4.2 which correspond to two-processor PC Palm TX?

  I manage to synchonyze Palm TX with desktop PC by USB cable: it has never been easy to get a connection and recently it became impossible. I tried a new adapted version but c. 6.2 requirements says it is not compatible with the dual processors for PCs, which is the case, and I found no other version newer than mine.
  Could someone suggest an adapted most recent version or a patch to the connection by USB cable problem?
  Thank you.

  You have two processors, or dual core?  No problem, and has been a common misconception by many users.

  Have you tried the Aceeca drivers?  They will fix compatibility issues with 64-bit operating systems.  See the "64-bit Windows USB drivers for Palm Desktop' thread at the top of this section.

  WyreNut

• Two processors listed in device of my Satellite A200-1MD Manager

  Is of my Satellite A200-1MD, on the device, manager by clicking on the processors opens two processors (for my two processors).
  One is "Intel (R) Core (TM) 2 CPU T5300 @ 1.73 GHz
  the other is "Intel (R) Core (TM) 2 CPU T7200 @ 2.00 GHz

  IS IT NORMAL TO HAVE TWO PROCESSORS WITH DIFFERENT SPEEDS!

  Is there a problem with my driver software or what? Keeping in mind that when I click SYSTEM in Control Panel it shows me that the processor is T5300 1.73 GHz 1.73 GHz.

  I need to know if there is a problem with my laptop, because I think that she was not working fast enough.

  Yes, it seems this is a common problem of Vista.
  At first my laptop L30 CPU is recognized as two different processors with different speeds.
  You must remove the CPU of the Device Manager and have to restart the laptop.

  After reboot new and new CPU Device Manager installation displays the correct speed ;)

  Best regards and don t forget to assign ;) reward points

  Happy new year dude

• z820: suspect z820 temperature probe causing one of the two processors to misbehave

  I'm running a double z820, who became very strong.

  I ran the HWMonitor and HP Performance Advisor for the diagnostics on the system and found some interesting things:

  1. The system thinks that CPU 1 is running at 92 degrees Celsius. And CPU 0 is on average about 35 ° C.  When I opened the case and check it out.  CPU 1 is actually cold to the touch.
  2. CPU 1 fan spin at about 4900, while CPU 0 fan is walking to 1100.
  3. Clock speed of the CPU 1 is locked to 1.1 Ghz.  CPU 0 is running to his good 3.5 GHZ

  So my conclusion is that the system is badly interpret the CPU temperature, CPU 1 fan to hyperspeed and ratchet down the clock of the CPU speed to try to protect against overheating.

  Oh, and if I'm not running something that causes the system to try and use all procs on two processors, the system stops.

  Overall, I currently have a workstation hard, running barely answer half speed and intermittently closed - which is unproductive and boring.

  -If my assessment is healthy, my question is: where to look to find the thermostat for CPU 1 so that I can either replace, or maybe the cable must simply be re-allocation of places.

  Any ideas would be fantastic.

  Problem solved.

  Coolant replacement brought to form normal and the machine is quiet and cool operation.