Take a minute to tell us about converter!

Similar Questions

• New Satellite Pro P300 - 19 p takes 3 minutes at startup

  Can someone tell me why my new Satellie Pro P300 takes 3 minutes to start once running.

  Remove applications, you don't need and make sure that unnecessary applications do not start with Vista (start > run > MSCONFIG > startup > uncheck the box in front of all applications, you don't need).

• ASPX pages simple 8.5 IIS takes 10 minutes to load

  I'm under IIS8.5 on Windows Server R2 2012 and have 9 websites operational. Some are MVC4, and some are classic ASP. Three of the ASP Web sites running perfectly, however, one of them takes 10 minutes to load. This is a simple web page with a single blow to the database and is very similar to other sites running on the same server ASP that work very well. I have reviewed the IIS and Windows logs and have enabled Failed Request Tracing. In the generated FRT for this page AspNetPageLoadEnter has a timestamp of 16:26:03.598 and AspNetPageLoadLeave has a timestamp of 16:36:08.739. The load event of the page on the page just sets a few variables and makes a call to the database to populate a grid of about 20 to 30 lines. This same database call is used on other pages in other sites so I don't thing is the problem. Each site uses its own application pool, but they are configured identically. Other sites Web ASP load in less than 10 seconds. Anyone has an idea why the load event of the page for this page takes 10 minutes? Could it be a setting in IIS that I'm missing somewhere? I tried to access this page several computers and directly on the server with the same results.

  Here are a few lines of the FRT.

  124	AspNetPageLoadEnter		16:26:03.598
  125	GENERAL_SET_RESPONSE_HEADER	HeaderName = "Pragma", HeaderValue = "no-cache", Replace = "false".	16:26:03.598
  126	GENERAL_SET_RESPONSE_HEADER	HeaderName = 'Cache-Control', HeaderValue = "no-cache", private, replace = "false".	16:26:03.598
  127	AspNetPageLoadLeave		16:36:08.739

  I found the problem. Try to connect to a server database that I do not yet have access to caused the delay of 10 minutes.

• Computer XP takes several minutes to start

  When I turn on my computer, it takes several minutes for all programs to load and my upcoming desktop icons.

  * original title - startup appears extremely slow *.

  Hi ChrisHood,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. do you have security software installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Instant message "this document failed", Epson SX415, it print but takes 20 minutes +.

  Would really appreciate the help. Whenever I try to print a Word document, there is a pop up Windows saying: "this document has no.." and the Epson box remains direct printing prints (usually) but takes an excessive amount of time (about 20 minutes).

  I: uninstalled/reinstalled, run the utility of Windows troubleshooting, maintenance on the printer (printer seems fine, nozzle, copy etc check), tried changing USB ports, tried Epson troubleshooting, obviously checked all cables, etc.

  I'm out of knowledge of where to go next, but unfortunately looks like a PC problem rather than the problem of the printer (printer is 3 months old, this just started to happen during the last two weeks).

  Thanks for any help, I'm going crazy trying to write essays for United I want to print drafts of!

  Hi HeatherChambers,

  1 done with Word documents?
  2. are - what you're trying to print to see if the problem persists on other applications?
  3. What is the version of Office installed on the computer?

  We recommend that you check if the problem persists on other applications such as notepad, WordPad, and internet explore.

  If the problem only occurs with the word, then see the following to solve the problems on the issue:
  1 see How to solve the printing problems in Word 2007 or Word 2003
  2 see Word is slow to start, print, or load documents

  For further assistance on Microsoft Word, please post your query to Forums in Microsoft Word

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista takes 10 minutes to open a session

  I m using Ms vista edition Home premium on asus p4v8x-mx with 3.00 GHz processor & 1 GB DDR ram. Now the problem is my vista takes 10 minutes to connect, please tell me wats the problem? must meet

  1 GB is not enough. you need at least 2 GB.

• During initialization. This may take several minutes to complete... [NEVER ENDS]

  I'm having the below problem configuring an ols PS100e, does anyone have any heads up, the system has been reset DELETEALLMYDATA,
  

   and now been on for about 30 mins, but every time I run 'setup' I get Database is not functional. The setup utility has failed ;
  

  I was going to try the remote setup wiz, but I can't find anywhere to download it?
  

  CLI> setup
  
                  Group Manager Setup Utility
  
   It appears that setup was run previously, but it did not complete. Restarting setup.
  
     ***    The battery is not completely charged. It is recommended that   you wait until the battery is completely charged before running setup. Please try again   Do you want to proceed anyway (yes | no ) [no]: yes
  
   Initializing.  This may take several minutes to complete...................   *** Database is not functional. The setup utility has failed.       Please try again.CLI>
  

  The configuration & db are stored on the hard drive, readers not the flash memory card.

  That's why I offered to put it back again.

• BlackBerry sync with Outlook - 16 000 entries takes 41 minutes calendar Smartphones to synchronize.

  I'm trying to move on to my new 8330 and leave my Palm Tungsten T3.  I transferred all my data on my new 8330, but when I go to sync data, it takes 41 + minutes to finish a backup 16 000 + on my calendar entries.  I'm missing is stupidly simple environment (be it on my computer, handheld or desktop software) which will speed up the synchronization process significantly or I need other other than the Blackberry Desktop software to do the job.

  Is it possible to accelerate the backup of all my data along?  My T3 takes about two minutes.

  I think I found my own answer to this question.  I was back up my Outlook data and in order to be 100% safe with him, set data to write one way, to Outlook on my Blackberry.  I learned to play later, and after having had a few back ups of the data on flash drives, etc. I changed the flow of data and data from my Blackberry to replace the data in Outlook.  The end result is that the backup takes less than two minutes.

  I'll continue to frequent back ups of my outlook data, but overcame this major problem of time to talk back data two ways.

• 7467c PC takes 15 minutes to get to the BIOS splash screen

  When I start the computer, the blue light and turns on the fane.  No noise of hard drive, the screen is black.  After about 15 minutes, the BIOS boot screen lights up and the computer starts up normally without any problems.  If I shut down the computer, wait a minute and it start up, the computer starts very well.  However, if left for a while, it takes 15 minutes to start.  The guard time fine clock.  This happened a few months now.  Meanwhile I have reformatted the drive, the update of the BIOS resets the default BIOS settings, and I tried to boot the PC with no devices attached without success

  Any ideas?

  I replaced the power supply with a 750 watt unit.  Computer starts with without hesistation.

• Rufus (free utility) takes 2 minutes to create a USB bootable for ESXi installation starting source who becomes the target of the installation, even for 5.5

  Just info, one of these open Windows source rare beads that are becoming more and more difficult to find on the web these days, in the middle of a see payloads of downloader.

  Rufus I found to be very convenient for the quick creation of a USB flash drive you can start from, and then only install, for ESXi, no command-line stuff to memorize necessary and very fast:

  TinkerTry.com/rufus-takes-2-minutes-to-create-a-bootable-usb-flash-drive-for-esxi-installation

  works very well with ESXi 5.5 also:

  TinkerTry.com/download-vsphere-5-lab

  and when finished with this flash drive and you want to use it for something else (but normal reformatting does not work), she who manages, even on Windows 8.1:

  TinkerTry.com/rufus-lets-you-quickly-and-easily-reformat-an-esxi-usb-flash-drive-back-to-full-capacity

  Especially useful for people to start who shy away from Linux VMware procedure:

  Format a USB to start the ESXi Installation or upgrade

  Documentation Centre of vSphere 5.5

  Windows diskpart commands or potentially dangerous. Really fair, fast and useful for pretty much everyone.

  Thoughts and opinions?

  Just a follow up on my comment about several injection of VIB in the ISO that you use as a file source for Rufus (a few months back, seen above):

  Here is the article that came out of this subject (Yes, it works!):

  TinkerTry.com/use-esxi-customizer-gui-to-inject-multiple-driver-vibs-into-your-esxi-installer-iso

• 2-minute video takes 30 minutes to render?

  OK, I have an Intel i7 860 Quad Core processor, overclocked to 3.7 Ghz, 8 GB of RAM DDR3, windows 7 64 bit,

  I used Adobe After Effects CS4 with the latest updates.

  I put the settings to make quickly using 4 all CPU. I have a video of 2 minutes with very little effect... basic fade transitions and change in tone of the color and contrast. The video is in HD 1920 x 1080 29.97 fps.

  Why always takes 30 minutes to render a minute 2 video?

  Thanks to all who help me!

  I save out as "Quicktime movie" using "Photo-jpeg".

  Why do you use PJPEG? Most of the people don't know what to do with this codec.

  best settings are used.

  At all levels? Do you have motion blur or interpolation activated?

  Woah, I just dropped it for 13 minutes... He says: "59% used 4.0 GB" I thought anyway 8GG I do use more ram?

  AE can't get very far to talk about what whether your rendering. The following image might include a huge image with heavy effects and estimated time could spend three days. And in three or four minutes, he could fall to 10 seconds.

  RAM does not necessarily increase the rendering speed of the AE. You can search 'rendering speed increase' or "decrease in rendering time" here for several hours. I have no patience with these positions. My first AE projects required whole weekend to make an effect on a single layer. Made today in AE abilites is nothing miraculous.

  bogiesan

• Why is it so slow Firefox! It takes 10 minutes to load, then 5 minutes to change between different pages. I have version 22, it is getting worse.

  It seems the newer version of Firefox, it gets the slower. What is the BEST version to download to use? This used to be a fast browser, now it takes 10 minutes to load. I did all this mentioned on the historic authorized help page, hides, scanned the computer, deleted Firefox and reinstalled, but it does not work.

  Chrome runs circles around Firefox, it will load in 10 seconds approximately and will work in MANY games better Firefox - using games is totally impossible with Firefox. I need to know which version is the fastest and has the best notes. It looks newer, it gets, the worse it works.

  Help!

  I have the same problem with Firefox 25.0.1. It happened months and I'm tired of it. I can't even watch a video in Firefox - YouTube or something - because it is always too rough. I don't have this problem with Chrome or Opera. And Chrome is lightning fast.

  I won't try Firefox in Mode without failure. Why should I? I will not uninstall other browsers, remove plugins (I don't really have a lot and they work very well in Chrome and Opera), or remove a file called User.js, if I have it. It is a bunch of nonsense. Firefox 25.0.1 works, or is not, without having to do all these things. So, I do not use Firefox any longer.

• Why does take 15 minutes to warm up before movies Apple TV ib?

  After that I turned on my Apple TV, it takes 15 minutes to warm up.  What can I do to make it more responsive?

  You set the ATV to sleep or disconnect power?  My ATV will load quickly sleep (less), but like all devices of type, it takes time to load the operating system if it is turned off. Maybe a minute?  I don't know faster that the Vizio TV is connected to my ATV charges...

  What version of ATV do you have? Have you tried a restore?

• I have an iMac at the beginning of 2009, which takes 5 minutes. to start. I did google and firefox as well as and VPN are the only things open. How can I speed it up?

  early 2009 iMac 2.66 processor

  OS X El Capitan worm 10.11.3

  249 GB available

  It takes 5 minutes to start and I get a lot of time waiting pinwheel

  I cleaned up google and firefox and checked for malware

  How can I speed it up?

  First start by going to system-> startup disk preferences and select your startup disk.  Sometimes after an update OS X startup disk becomes unselected for the firmware needs to address each possible boot device, including USB, SD card, DVD, network, etc... and wait before Timeout interface moves the next possible candidate.

  After that, start in safe mode

  http://support.Apple.com/kb/ht1564>

  This will NOT load any substance left 3rd, you have installed.  Many times, it is 3rd party additions that cause problems of this kind.

  You can edit the output of EtreCheck, who will analyze the someone

  https://discussions.Apple.com/docs/doc-6174>

  Look at the Applications-> Utilities-> Console of all frequently repeated journal entry, such as the process begins, process dies, starts, dies, starts, dies, wash, rinse, repeat also.  This type of failure can go under the radar of other controls.

• Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

  HP Officejet 6500 a Pus E710n-z series

  Windows 7

  Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

  Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.