Take the shape of a star with a lot of corners and edges

Similar Questions

• When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  When I create a rectangle, I can not not change the shape of a rectangle with the cursor in illustrator CC 2014 for what?

  Xavigarcia,

  I'm afraid that have met you the Rectangle Live bug that is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the functionality is Gone

  I have been using the functionality of Firefox in which I could have multiple sets of tabs open, but only see the game I was working with. I have updated and now the feature disappeared. I had a small icon on the top right of my toolbar. I used it all the time to keep windows separated for financial, plans to travel items, news, etc.. Has it been removed from Firefox?

  Hello

  The feature of tab groups is always present. You can try with the button right of the + after the last tab and Customize. If the icon is hidden behind the other, or if it is available inside the mini window customize, you can put it back. If the problem persists, you can also try of reset toolbars and controls: and start to make changes and restart in Safe Mode screen.

• After awhile, the aero theme runs with a lot of delay and low fps

  I noticed this problem for some time now. My Office is many running themes aero after awhile. Normally, it feels like running on a smooth surface, 50 to 60 images per second. But after a few minutes, all of a sudden its down to 10 or 15 fps , which is almost unusable.

  Workaround so far is to disable aero theme by switching on the Windows basic theme and then back to Aero. But within 5 minutes, its back to the drawing board. Because the whole "of the drawing Office" fps is reduced, using programs such as Firefox or Premiere Pro, Photoshop or even a video player is a pain. However when I run a video game Crysis etc, the fps is fine and the game takes place as it should. Anyone with the same problem? Any solution?

  CPU: AMD Phenom II X 4 955

  GPU: AMD Radeon HD 5970

  Memory: 6 GB

  Storage: About 400 GBs free

  Drivers: Catalyst 14.9 (later). I had this problem with previous versions of pilot as well.

  Windows: Windows 7 Ultimate SP1 (64-bit)

  Average CPU usage: ~ 2%

  Hello

  Thank you for the update.

  Please run the following fix and let us know the result.

  Visual effects Aero Glass in Windows are not working or displayed

  I hope this helps.

• How to improve the only table has full table scan with a lot of data and without PK

  Hello world...
  
  
  
  I have YOUR table...
  CREATE YOUR TABLE
  (
  EMPLOYEE_NUMBER VARCHAR2 (30 BYTE) NOT NULL,
  ATT_DATE DATE NOT NULL,
  DATE OF DATE_TIME_IN,
  DATE OF DATE_TIME_OUT,
  NUMBER OF DELAY_MINUTES
  NUMBER OF EARLY_EXIT_MINUTES
  STATUS VARCHAR2 (20 BYTE)
  )
  
  
  This table contains a primary key and no clue on this subject. and coontain around 600 000 recoed.
  
  query this table take about 5 mintes with full table scan
  
  Select * from your.
  
  
  I create indexes on Employee_No and atta_date, although there is a constarin for bith of them is not zero, but they have a duplciate value...
  
  But even thogh the table always do full table scan...
  
  
  BR

  Thanks for the stats...
  Well, your statistics on that table are updated.
  The volume taken by the table is consistent with the number of lines you have and the average space taken by each activity.

  what I propose (this is not a 'query' problem since you decide to read the ENTIRE contents of the table and you are not satisfied with the performance):
  -Try this query in parallel (maybe your server will not parallelize it):

   select /*+ PARALLEL(x) */ * from ta x
  

  - or check what are the events of theses/wait (probably the disk IO rate or the network)

  REM: As SY compression could be an option to go in his direction, I repeat:
  "change the type data number EMPLOYEE_NUMBER" instead of varchar2 (rebuild the table) in a way you will earn enough space (bytes/line) VS the actual duration of each lines.
  Another way to reduce the space and If you insert / select in this table is finally reduce the PCTFREE, but beware the danger of this is that you will lose all the benefit if this table is updated or deleted. (it may not be the case today, but it could be in the future!)

  Published by: user11268895 on July 18, 2010 16:15

• Most of the games directx9 + who have played a lot on XP and the beta version of Windows 7 was even faster as GTA4 drag along with the latest updates to HW and SW. Games & all the performance Console is to kill the pc (if im a 4 pc now)

  Hi, I bought Vista 64 bit earlier and it almost made me for the mac, but when I first tried win7 beta and it was great on a lower technical platform and could not wait for full details. so, I bought a brand new platform last i7 CPU and 6 GB DDR 3 channels and the latest Nvidia 275GTX 1765 MB Vram Grfx and could not do more than what was and is still ongoing. I installed my new win 7 64 bit 1 and was a bit off on how he has been slow to version beta on a platform nearly 5 years I used 7800GTX Athlon 64 4200, as what are you do looks great and moves faster than this in. * Vista. All my old game where _ while people with nearly the same and less spec flight here by so I switched to the 32 bit (good by my 3 extra GB installed) running. It was a little better, but the games that are 3 years old just down or blue screen. SO why go back in the power PC (XBox 360 + dales come to mind) are really trying to kill the power of the pc to the console, PDA etc.? So it seems that XP is the only one for some UM with games, virtual xp mode is a waste. So if you have something good, well, until a better operating system just to please let the people have because we are all put you into your work time back. Please notify.

  Hello microblackhole,

  I understand that Windows 7 gaming performance do not meet the requirements you're looking for.

  I wish to inform you that with Windows 7, you get to use 4 GB of Random Access Memory.

  The major problem with your computer, it seems that there are a few old games that break with blue screens.

  Windows 7 comes with Direct X 10 preinstalled. So you should try to understand what are the games that are broken.

  Here are a few methods that you can analyze the reasons why the games are block:

  Compatibility:

  Check if the games are compatible with Windows 7. You can run the troubleshoot compatibility utility to discover the solutions to run the games:

  1. open the program compatibility problems by clicking on the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting.

  2. under programs, click on run programs for previous versions of Windows.

  Read this article which will give you more information about this:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-program-compatibility-Troubleshooter

  Analyze the event viewer:

  I suggest you analyze the event viewer to find what could be causing the crash games.

  1. open the start menu and type event viewer in the start menu search bar. Open event viewer from the menu.
  2. in the case of Viewer click Windows logs in the left panel.
  3. click on application under Windows Logs logs.
  4. search for the error messages listed in the event viewer window Central Panel and double-click on the error to check if it log is related to games that are broken.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  You can check the link which will help you analyze the entries below Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I use the old sndrec32.exe (comes with XP) in Windows 7 and Vista?

  SNDREC32.exe was demand for Sound Recorder in XP and it changed to SoundRecorder.exe in Vistra and Windows 7.

  The new version will allow to record more than one minute of audio, but (as with most things in life when something is given something is removed). The new version cannot be used in Word to easily enter audio commentaries that are built into Word.

  Anyone copy the old SNDREC32. EXE from XP to use in Windows 7 or XP and were there any problems?

  Peter Evans

  http://emarkingassistant.com

  I don't think you can do it, certainly not in the 64-bit version of W7.

  Have you read this article? That is what you want to achieve?

  http://Office.Microsoft.com/en-us/Word-Help/insert-a-sound-HP005257344.aspx

  Try to use Audacity to record your comments as mp3, then their incorporation in your Word document works for me.

  See you soon,.

  Jerry

• How to replace the 404 page default catalysts with a business I created and downloaded through Muse?

  I have a 404 page custom that I created in Adobe Muse, which I can see in the pages section Business Catalyst but direct site pushes on the defect of BC, which contain the correct home page redirection, but want to use mine... Searched forums for hours and play with it the best I can, but no luck... Is it still possible? Thanks in advance.

  Hello

  Login to your admin Site > Site Manager > Pages

  Select the page and Actions make start page.

  If it still doesn't work do not, contact support by live chat where they'll guide you with steps.

  Thank you

  Sanjit

• How to solve the comparison between a value with static type of string and type possible unrelated numb

  I'm new on this and any help would be greatly appreciated, Im trying to display numbers customized for the values of a Hslider.

  Here is my code so far:

  <? XML version = "1.0" encoding = "utf-8"? >

  < s:Application ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  " xmlns:s = 'library://ns.adobe.com/flex/spark"" "

  "xmlns:MX ="library://ns.adobe.com/flex/mx"minWidth ="955"minHeight ="600">

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  Import mx.events.SliderEvent;

  protected function ValueSlider_changeHandler(event:SliderEvent):void

  {

  ValueLabel.text = String (ValueSlider.value);

  if (ValueSlider.value == '0')

  ValueLabel.text = '150';

  if (ValueSlider.value == '1')

  ValueLabel.text = "333";

  if (ValueSlider.value == '2')

  ValueLabel.text = "543";

  if (ValueSlider.value is "3")

  ValueLabel.text = "9342";

  }

  []] >

  < / fx:Script >

  "" < s:Panel x = "199" y ="141" width = "250" height ="200">

  "" " < s:HSlider id ="ValueSlider'x ='74"y ="68"maximum ="5"" minimum = "0" stepSize = "1"/ > "

  "" < s:Label id = "ValueLabel"x ="109" y ="38" text = "Label"/ > "

  < / s:Panel >

  < / s:Application >

  Take a look at this project below. I modified your example. You can control the cursor changes over the link or explicitly manage events:

  http://ns.Adobe.com/MXML/2009.

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" minWidth = "955" = "600" minHeight >

  const CONVERSION: Array = ['150', '333', '543', "9342"];

  Import mx.events.SliderEvent;

  protected function valueSlider2ChangeHandler(event:Event):void

  {

  valueLabel2.text = CONVERSION [event.currentTarget.value];

  }

  ]]>

• How do I take the photo in an email that was sent to me and place it in a folder?

  I want to save pictures sent to me in e-mail. How do I do so that I can get back later to put in my photos?

  Try to right click on the image, then select Save as. Do not forget
  to check the registration of location before you accept the image.

• I want the text to stretch all the way across the window instead of centered, with a lot of unused space on the left and right sides.

  It is only using about 50% of the screen. The 25% of the left side and 25% on the right side are just empty space. I want the content of the page to extend over the entire window.

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

• 'Resources in use' error during the acquisition of the analog data on AI0 with external clock on PFI0 and beginning of slope trigger analog on AI1

  Hello

  I use the card PCI-6111.

  I am trying to acquire analog data on channels dev1/ai0 ai1/dev1 using pulses of external clock connected to the PFI0 channel. I also want to trigger the acquisition, when the channel dev1/ai1 signal reaches certain level. I send a triangle wave channel dev1/ai1, and I need the data only for the front.

  I have configured the task in the following ways:

  

  However, I get the error-89137 after function DAQmx Start Task:

  Specified route can not be satisfied, because it requires resources that are currently in use by another route.

  Source device: Dev1
  Terminal of source: PFI0InputLockOut
  Target unit: Dev1
  Destination terminal: AnalogComparisonEvent

  Resources in use by
  Task name: _unnamedTask
  Source device: Dev1
  Terminal of source: PFI0
  Target unit: Dev1
  Destination terminal: AI/SampleClock

  Task name: _unnamedTask

  If I change the internal clock external clock - switch works. If I pull the trigger, the external clock works, too. But these two tasks do not work together.

  Help? Advice? Thank you!

• Deleting the definition of Type casuses control a lot of misreferences and program in the block diagram errors

  In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.

  Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc..  This side effect is much more errors, broken links and misreferences than expected otherwise.

  How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?

  
  

• I have an old dell with a lot of questions and you want to wipe and start over as I just got this unpacking. Is this possible?

  I want to clean a computer and start as I just got it out of the box.  It's a dell that I got in 2002.  Any help?

  Thank you

  James

  Hello

  Call Dell and ask them to send you a set of XP Recovery discs that XP is the Windows operating system in 2002 and a CD that came with Dell computers at the time.

  You have lost your.

  To check the serial number of your computer to make sure that it is what you have installed.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Here is the Vista Forums.

  For more XP? problems please ask in the Forum Installation of XP at this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install?page=1&tab=all

  See you soon.

• Problem with a lot of facts and dimension conform

  Hello gurus:
  
  I'll have 2 consistent dimensions and 3 facts.
  Now the problem is that whenever I try to wear all three made, I get an error display of consistency.
  
  I need to make a report that has at least one column of all of them.
  Please guide me.
  
  Thank you.
  
  ~ Vinay

  Vinay,

  You can resolve this problem by creating dimensional hierarchies and fix levels of content appropriate to the fact tables. Follow this

  1 create hierarchies for both of your consistent dimension, if you don't have all of the levels, create the hierarchy with at least two levels, total and retail.
  2. open the properties of the logical source of each fact table and define the level of content at retail for the two dimensions.

  It will work. Make sure that you select only measures the fact with confirmed dimensions tables (aggregated).

  Madan