taking about 6 minutes or longer at the start and saying in a black screen 'remove shading '.

Similar Questions

• My computer takes 20 minutes to start and also has a black screen

  Hello world

  I have a Dell Dimension 9200 and recently every time I start my computer or it reboot, it takes 20 minutes to get to the desktop and also has a black screen. This issue has occurred only recently and I don't know what is the cause and so advice would be welcome.

  Other strange things include all my system restore points are missing and so I can't return the operating system to a previous date when it was working properly.

  And when I did a test on the hard disk, one of the internal drives have had a "Fail" result - Code 7 back. I don't know if this was caused by a virus or is the result of a mechanical failure in the hard drive itself.

  Thank you very much.

  Gordon

  

  Bev.

• I just downloaded a new theme for xp on windows site and I changed the resolution and has become a black screen on my pc.

  I'm down and back up to close it, but can not see the screen to do anything it is like a curtain that I see a bit of color behind the layer

  If the screen resolution is set to a setting that your monitor is not supported, the screen can be empty.

  Try to boot mode safe (repeatedly press the F8 key as your computer starts up).  Safe mode will come with a screen resolution standard (but large) that support all monitors.  If you can then see your screen, change your resolution to something that is supported by your monitor.  If you make the wrong choice and your screen turns black, don't panic, just do not touch anything and wait about 30 seconds and will return to the screen.  Once you properly set your resolution, then reboot in normal mode.

  HTH,
  JW

• After you turn off the root of the directory utility user, I went back to the main screen and all other user accounts showed is no longer at the start, as they were before you enable the root user.  Help.  Please, I beg you.

  I have activated the user 'root '.  It was an attempt (for the sake of granddaughter age) to check its history since I am the administrator.  Realizing that this method was much more complicated than what I am capable of managing, I returned the utility program directory and disabled the user 'root '.  I thought that everything was ok, as I did not made anything while connected as user 'root '.  Instead, restart the computer, all users, including myself were no longer at the start.  The only point was a blank user name and password.  No picture.  No guest.  No user.  How to return those and I did something to cause this?

  Else you being logged in as root?

  Activation and deactivation, then root should not have caused that.

  Also, having allowed root is one of the ways you get a login screen showing only the name and the password.

  You should be able to type in your user name and password to connect.

  One time connected, check users & groups system prefs, Connection Options and make sure he's on the list of users. You will have to click on the padlock at the bottom to make changes.

• Well this version allows to update your browser all the minutes as would be the former, and if not what version will leave you well do this?

  Well this version allows to update your browser all the minutes as would be the former, and if not what version will leave you well do this?

  This?

  • ReloadEvery: https://addons.mozilla.org/firefox/addon/reloadevery/

• I myself put in place as long as the administrator and am the only user, but my wife's name is still on display in the user records

  original title: problem strange user

  Hello people out there... My problem is that I got on the computer of my wife which is a HP Pavilion with Vista home Premium. I myself put in place as long as the administrator and am the only user... However my wife's name still shows under the user folders, i.e. 'C:\User\jenny '. I went to the sections of the user to delete, but it does not appear, it shows me only... also when I try to delete the folder of the user, the delete option wonder if I want to delete my account... My folder is located on the right of the Start button with more programs from the main menu, but my wife is located under the main C: drive I obviously did something wrong when I set up my user account, but I have no idea... so if anyone of you people can help me, I would be very grateful... Thank you.

  If you change the name of an account, the name of the associated in C:\Users folder does not change. As far as I know, there is no way to change this.

• With 32-bit and a clean install also takes a long time to start and a very long time to stop.

  I use 32-bit and a clean install also, it takes a very long time to start (and sometimes it will not) and a verlong tike to close

  Hello Duane,

  For more clarity and response, I divided it in its own thread.

  After your post, it seems that Vista 32 bit takes a long time to start and a very long time to stop.

  What are the specifications of material of this machine?

  We might want to try a clean boot and see how that affects the issue.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve this problem.

  Best regards

  Matthew_Ha

• Cannot install the Bootmanager from vista DVD patch (black screen cursor white)

  Hello

  I started getting an error of e/s on my computer toshiba laptop l305d-s5928

  I went to my local computer store and got an installation disc, so I could repair the bootmanager.  (I watched the error message about this).

  I inserted the disk and booted from it.  It loads the files, displays the microsoft name and logo with the scroll bar, and then I get a black screen with white cursor. I can't understand what it is.  or what to do.

  Any ideas?

  EDIT: ntfsfix on Knoppix was not able to fix it.

  Hello

  Thanks for the post. Unfortunately, the question you have posted is not clear. Clarify these issues so that we can better understand the issue.

  a. Why have you tried to repair the Boot manager?

  b. What is the error that you have tried to solve the problems?

  c. the disc that you used is a disk drive or repair facility?

  d. were performing a clean installation or a repair (Custom) install?

  Provide more information so that we can better help you.

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again.

  reformatted my mac pro. copied from iPhoto from the external backup drive. received the error message saying lack of theme fonts. removed the app to be able to reinstall. but my app store it shows as installed. How I install it again. the deleted copy is missing in the trash folder too.

  Unplug your backup disk, restart, and try again.

• Windows xp Pro chkdsk keeps running over and over again at the start and...

  Running the scan and says no errors found and windows has finished checking the disk and then rest on this screen. I'm unable to boot in a mode, including 3 Safe Mode options. Please help me to help my friend with this problem on his Dell PC.

  Before this error occurring, we run a defragmentation and planned Windows to check the drive for errors.

  Cannot start in safe mode as lists of lines of code system32, then freezes.

  Many Retarts have not helped.

  We have not cahnged anything using F2 or F12 to change Boot & startup menus.

  When XP restarts, it checks the "dirty bit" on each volume (hard disk) to see if a chkdsk needs to be run on the volumes.

  The dirty bit can be defined on a volume if you had a power failure or may have used the power button, had an aborted restart or an abnormal termination.    The only way to clear the bit of impurity on a volume is successfully running chkdsk with error correction (chkdsk/r).

  If you have a regular chkdsk in the meantime, he'll also want to run when you restart the system.

  When you start in Safe Mode, if one of these conditions are met, XP run the chkdsk command, and during this time, your system will be appear to be stuck, frozen or appear to hang with the last thing on your screen being loading mup.sys - shortly after charges mup.sys is when the chkdsk will start running and the system seems to be stuck.

  This suggests that their system is hung on mup.sys when he's really hung at all - chkdsk runs is because it takes or they old to many people is by planning the chkdsk at the next reboot.

  I don't know what AVG load and will not install AVG to know.

  If your system seems to stop mode without failure and the last thing you see on the screen is mup.sys (or in your case of the stuff AVG), look at the HARD drive access light.

  If the HARD drive is flashing, chances are good that the chkdsk command runs either because it takes or it, you have planned.  In this case, you will need to wait outside and if you use the power button, you could make things worse.

  You will need to wait outside and this could take some time depending on the size of the volume, the amount of data on the volume and what chkdsk finds to do.

  I think that I start your system in the XP Recovery Console and run chkdsk /r from there, so that you can actually see race and what he has to say.  If that chkdsk /r works own (it might take more than one pass), which erases the volume dirty bit.  It will not relieve your a regular chkdsk system, but I would start there.

• Won't start at all. just a black screen. Only the satrts upward on safe mode

  Won't start at all. just a black screen. Only the satrts upward on safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

  Original title: windows does not

  I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

  What can I do?

  Enter your bios usually with keys F2 or delete to the first powered

  Use default Optimize can be the F5 key and save and exit,

  Insert your installation disc or flash media and press F8 or F12 to boot on it

  Then use the recovery tools to run the Startup Repair tool.

  http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

• Gel after the start and clicking on browser

  Recently, my computer hangs for a while after the start and clicking on my browser, why and what can be done?

  Hello

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.