taking into account user keeps me collapses of its Internet Explore first

Similar Questions

• Calculation of available time after taking into account "outages".

  I have two tables, travel and failures. The shift table contains one record per person (identified by an ID unique person) by date and a time field start time and end. The failures table contains documents showing when someone is unavailable and has a start date/time and end date/time.
  
  What I need to do, is to create a view that returns one line per record shift, showing their hours available taking into account failures which cover this change. A failure may extend over several days, or there could be multiple failures within a single day. For example, if there is a power failure for a person from 12/01/2009-08:00 (DD/MM/YYYY HH24) and ends at 2009-02-12 10:00 and the movement of people both at the time is 08:00 - 16:00, it should return zero hour availability for 2009-01-12 and the availability of 6 hours for 2009-02-12. Similarly, assuming the same displacement from 08:00-16:00, a shift with 2 failures from 08:00 - 10:00 and 15:00 - 16:00 must return the availability of 5 hours. Failures for one person may not overlap.
  
  Any ideas on how to go about it?

  Hello

  Welcome to the forum!

  Not counting failures, the total duration (in days) is end_time less start_time, assuming that these columns are DATEs.
  Subtract the total time when outages overlap shift multiply by 24 to change the units from days to hours.
  One way to do that is:

  SELECT     s.*     -- or whatever columns you want
  ,     24 * ( (end_time - start_time)
            - NVL ( ( SELECT  SUM  ( LEAST    (end_time,   s.end_time)
                          - GREATEST (start_time, s.start_time)
                          )
                   FROM    outage
                   WHERE   person_id  = s.person_id
                   AND     start_time < s.end_time
                   AND     end_time   > s.start_time
                 )
               , 0
               )
            )     AS hours_available
  FROM     shift     s
  ;
  

  Maybe it's not obvious why the conditions

  ...                 AND     start_time < s.end_time
                   AND     end_time   > s.start_time
  

  say if failure overlaps with shift.
  Look at it this way: in which case failure to NOT overlap? They do not overlap when either
  (a) the breakdown begins after the end of the SHIFT (i.e. start_time > s.end_time), or
  (b) the failure ends before the start of the transition (i.e. end_time<>
  The conditions of the query are the negation of these two conditions.

  It would be in reality a little more correct to say that failure and shift overlap when

  ...                 AND     start_time <= s.end_time
                   AND     end_time   >= s.start_time
  

  which would include cases where you start at the exact moment the other ends. Given that the total duration of such an overlap is 0, I left these cases limits out of the query.

  This requires that start_time<= end_time="" in="" all="">
  I made a few other assumptions, too. If I have something wrong, or if you need assistance for any reason, after the informatipn as mentioned centinul.

  Published by: Frank Kulash, November 1, 2009 19:23

• data execution prevention keeps me from loging on internet Explorer how can I avoid this

  data execution prevention keeps me from loging on internet Explorer how can I avoid this

  Hello

  1 did you change on your computer before this sisue?

  2. are you using the cable or wireless Internet connection?

  3. are you using Internet Explorer? If Yes, what version of IE are you using? Find your version of Internet Explorer you are using http://windows.microsoft.com/en-US/windows-vista/Find-out-which-version-of-Internet-Explorer-youre-using

  You can start Internet Explorer in no Add-ons mode and check.

  a. click on start.

  b. in the search type Internet Explorer (No Add-ons)

  If the problem stops, an add-on is causing the problem. To identify what is the cause, you can start internet Explorer normally, disable all modules and activate each module one by one and test to identify the problematic add-on.

  Internet Explorer Add-ons: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

  See also:

  Data Execution Prevention: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

  Change Data Execution Prevention settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

• I keep losing my icon of internet explore. Loss of accessories and games on the start menu. Error message reports the necessary files from the service pack 3.

  Original title: internet exployer__

  I keep losing my internet exployer icon and do it for restoration from the xp CD... None of the usual methods of work.  I lost the games and accessories and can not restore the XP disc... error message indicates that he is of the necessary files from the service pack 3.  I installed sp 3 made a cd and tried to get it there and no luck

  Hello

  1 how long have you been faced with this problem?
  2 have. what troubleshooting steps you tried?
  3. What is the exact error message you get?

  Method 1: You can also try opening internet explore from the following location.

  C; \Programs Files\Internet Explorer\iexplore.exe

  Method 2: Create a new user account and check if the problem persists there.
  http://support.Microsoft.com/kb/811151

  Method 3: Also to run a scan for virus/malware online on the computer.
  http://OneCare.live.com/site/en-us/default.htm
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• programs not responding, freezing, office does not properly taking into account the temporary office.

  When I start my computer, I get the Welcome screen and then my office takes over thereafter, is not loaded correctly, and I get temporary.  I have to restart. Virtually every day, windows mail opens then freezes, I get a program does not almost any time.    I do analysis antivirus regularly, clean and defragment.    can someone please tell me what to do with it.

  Read the info below:http://support.microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Win7 slow, does not take into account user settings

  I have PC laptop Toshiba 64-bit using the win7 update. Drive is 7200 RPM, disparate media card, 4 GB DDR.
  -It takes forever to accomplish tasks. It's a way slower than XP on a desktop computer old 7ry. The progress wheel turns away while win7 is the simplest tasks. Why?
  -win7 don't know my settings of the user's screen saver goes straight to standby mode. Even after several reboots.
  -64-bit firefox takes forever to open.
  -J' tried to use an application to eliminate the irritating arrows on shortcut icons and it wouldn't work.
  -I'm on your forums and Ms. Center but see other people have similar problems.
  -Are there problems multi-level with win7 upgrade, which can be cured by an update? How can I speed up my laptop? THX

  Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Old problem with images HD upgrade taking into account

  Hi all

  I've been here with this issue since day one with my rig (2.5 years).

  I'm not able to edit HD images correctly, the editing process is super slow, I can't seem to get an overview of the sequence, because it comes to accuse.

  The images are numerous cameras each film, DSLR, GoPro, MTS, etc..

  I work at 90% of the time with a single video stream.

  
  

  My current setup is:

  I7 2600 k 3.4 (no OC), p8z68 v pro MOBO, 16 GB of ram (4x4Go G.Skill RipJaw X Edition Dual Channel CL7-8-7-24)

  GTX 560 Ti

  caviar black 500 GB sata for os 3

  2 * 1 TB caviar black sata 3 raid for project & media

  2 * 1 TB sata 3 raid of black caviar to Scartch, Renders, etc..

  caviar green 2 TB for backups.

  * using the embedded raid controller.

  
  

  My workflow is really painful, I work with proxy files to overcome the problem of slow editing;

  1. get clips hd from the client

  2 encoding files in low resolution avi/mpeg

  3 mounting

  4 link sequences HD media (manually - approx. 30-40 minutes)

  5 error checking

  6. review of the movie - very slow due to the HD

  7. export

  Then. any movie, takes forever.

  A lot of people are trying to help with my current hardware, but I couldn't find a single solution to the problem.

  So, I want your advice, I had to upgrade my rig? because if I know that the update in a budget will have things smooth, it will be worth it in the short term.

  If you recommend the upgrade, which should go for? What can I keep?

  Thank you and best regards,

  Mehdi.

  Biran, welcome to the forums

  Because of your GoPro and DSLR media without any overclocking you really need a lot more CPU power.  At least a hex-core.  But the first thing you need to do is read encyclopedia of prejudice on building a computer Assembly for Premiere Pro on our web site, in particular its Pages Tweakers.  Especially look at this chart to see why you need this upgrade of the CPU.

  

  Note that the GoPro and DSLR QT are both very intensive CPU.  Initially you could just start with a new motherboard, processor and CPU cooler; and possibly reuse your RAM, GPU and hard drives.  We should know more info about your business supply and power.  The next update (later) would be in the area on the hard disk.

• Smart playlist without taking into account the time of power

  For many of my songs, I put options in iTunes to start at some point (start for example, eliminated song a movie after the composers finished introduce), or stop at some point (for example, end "A Day in the Life" until the inner Groove goes off).  However, when I listen to them on my iPhone, via the list of each song, I said I love you, they begin to run and play all the way to the end.  Only when I listen to the song in a different playlist, or ask Siri Shuffle it for me, these options work as it should.  Does anyone else have this problem?  My solution would not work when I want to take the first song myself at the time.

  I also have this problem and it's really annoying! I'm on an iPhone iOS running 7 10.

  It occurs in every playlist I have regardless of whether it was a smart playlist or the normal playlist I made.

  Another thing that my phone has done is when the playlist rolls that some songs will be start of subject to halfway through the song. I don't know if it's because he plays from the point at which I jumped the song the day before. I manually checked every song in my iTunes library to make sure that the box saying "remember playback position" only is unchecked (took me a while). Each box is unchecked. Ugh. I hope it's a little bug iPhone will fix as soon as possible.

• Why is relativeInitalX value not taking into account the triggering delay? using scope OR with the PXI-5124

  Hi all

  play with a digitizer PXI-5124 in a case of PXI1042Q with a PXI8110 controller that runs labview 2012 (latest updates) with the latest version of the driver NIScope.

  I put in place an acquisition of off-delay (by assigning the triggering delay, for example 20us) which works very well (I can tell by the signal I get delay control works correctly), but the data returned in the info wfm cluster (using the 2D version of niScope I16 Fetch) does not have this delay.

  Description of the relativeInitialX within this cluster indicator indicates "is the time in seconds between the trigger and the first sample in the acquired waveform" but its never to return something around 1E-9 independent of trigger delay. Surely the relative initial x should reflect the triggering delay?

  I'm doing something wrong?

  Thanks for your help!

  So, I made a screenshot of the image in the section "Trigger Delay" link I sent you.

  

  Meaning of the symbol:

  T0 = original moment of relaxation

  T1 = time to trigger used in the acquired record (t1 = t0 + TriggerDelay)

  T2 = time of first sample in the record of the acquis.

  RX = relativeInitialX = t1 - t2

  Response to previous reviews

  «I understand what you're saying - so basically, if I want to know the delay of my trigger for the first sample in the record, I just add my delay time value to the relativeInitialX.»

  • Close, the delay of the original trigger (t0), for the first sample in the record (t2), would actually be TriggerDelay-relativeInitialX

  «.. . Nowhere does graphically describe where is the relative value of initialX real. »

  • Right, relativeInitialX is not a timestamp, so it is not a place on the timeline, it is the difference between two timestamps (t1 and t2 above), where the relativeInitialX name.

   

  "The trigger"record"is the straight line in the Middle, so expect relative to - 1/2 initialX record length?

  • Almost correct, because the reference trigger is relativeInitialX to the position of 50%, will be the time in seconds for 1/2 the record length. (i.e. If the registration has been long relativeInitialX, 2s = 1 s).  RelativeInitialX will always be the delta time between the trigger (t1) and the first sample returned in the record (t2).
  
  
  • For example using the picture above: If t0 is 10 sec, Trigger Delay = 3 sec, SampleRate = 1 kHz, = 1000 record size.  This means that t1 = 13 s.  Our record is long of 1s (1000 points to 1 DC between each = 1 s), if t2 = 12.5 sec.  If away from all these moments are absolute time, as the timestamps.  So relativeInitialX = t1 - t2 is 13-12, 5 = 0.5 sec.
  
  
  • As a side note, the reference position should not be 50%, you can configure to between 0-100%.

  Time not yet discussed record attributes

  I don't want to make you more confused, but there is another useful attribute in the waveform info that we've not yet discussed and its AbsoluteInitialX.  Starting from the NOR-SCOPE help file:"absoluteInitialX is the timestamp of the first sample of recoveries in seconds..." "So, using the above image, absoluteInitialX = t2.

  I hope this helps.  If a part is still not clear, let me know.

  -Nathan

• Problem with convert to PDF from Excel without taking into account the layout and graphics/graphics

  I work with Excel files with graphics (clipart) and charts from the data on the worksheet. I use Excel 2007 and everything a year ago and a half downloaded the option "convert to PDF" on the Microsoft website. It has been working beautifully. In Excel, I've got a) set print area b) go to "adjust to a page" print preview can convert to PDF format and everything on the PDF page looked like exactly as it did in Excel print preview. It worked flawlessly...

  UNTIL...

  .. .the most recent "upgrades" have been installed. Now the menu reads, "Save as PDF or XPS" option and the PDF is a mess. Excel text comes out OK, but any graph or Excel charts will not resize itself, and are completely out of the page. For example, a chart that is supposed to be in the lower right corner must be resized in Excel, placed in the center of the worksheet, on the text and using this approach, resize, save a PDF routine about 50 times, and you can finally wrong PDF resembling the Excel worksheet. Of course, the Excel spreadsheet is totally messed up because you have to move the chart in the spreadsheet and it's a mess, not to mention a waste of time.

  I uninstalled the Converter Microsoft PDF and XPS, and then downloaded and installed the PDF Converter (alone). No luck. It's always a mess. My business is at a standstill until I get this sorted. Help, please!

  KFG

  There is a fix for this.  It is described in a strange article entitled ' Description of the fix Excel 2007 package (Excel-x - none.msp, Graph-x - none.msp, Xlview-x - none.msp): August 25, 2009 "located here: http://support.microsoft.com/kb/973402/

  Before installing, my PDF and XPS exporting from Excel had too much size images.  Now exports are correct, just like before the Service Pack.

  Unlike article, my patch was dated 13/10/2009, rather than 19/08/2009.

  See you soon!
  BillVo

• Windows 7 without taking into account the power settings

  I have a dell xps 15z running under Windows 7 64-bit, and it was just openly ignoring my power settings.  The display turns off after 5 minutes, it never sleeps, nothing.  It will stay just the way it is left until it runs the battery down.  What can I do to fix this?

  Hi soveryconfused,

  Follow these methods.

  Method 1: Run the troubleshooter of power.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-power-problems

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting steps, follow step 7 in the link to return the computer to a Normal startupmode.

• Design taking into account future growth.

  Hi, I use 11.2.0.3 version of oracle.

  We are in the process on the introduction of a new table in our database, so it expected to grow considerably(~50GB) in the future, want to decide its strategy of indexing/partitioning from its inception. I have provided.

  (1) this table is to have two important columns customerid, taskid for each customer id it will be 10 different taskid and there will be about 200 clients whereas commercial future. the two columns are varchar2. a status (varchar2) column that contains 5 different registration and other status 8 columns describing more details.

  (2) this table will not have a primary key, because he will accept customer file data, and he must accept the records in doubles too without the slightest mistake on.

  (3) for most in functionality, this table is queried using two main column (custometid, taskid) and the app guys confirm they will not be able to query the table using the date column.

  So I think
  composite(List-List) of partitioning the table based on customerid (partition) and taskid (subpartition)
  should I create global index on customerid and partition local index taskid.
  or
  single global index on (customerid, taskid)?.

  Please suggest.

  933257 wrote:

  He should spend in the future considerably(~50GB)

  (1) this table is to have two important columns customerid, taskid for each customer id it will be 10 different taskid and there will be about 200 clients whereas commercial future. the two columns are varchar2. a status (varchar2) column that contains 5 different registration and other status 8 columns describing more details.

  (3) for most in functionality, this table is queried using two main column (custometid, taskid) and the app guys confirm they will not be able to query the table using the date column.

  composite(List-List) of partitioning the table based on customerid (partition) and taskid (subpartition)

  50 GB, 200 customerid, 10 taskids - is 2 000 combinations, which means 25 MB by combination, and queries are based on a single client and task. -unless there is any other queries involved predicates will be very slowly as time goes - especially if you have no way to "time-dependent" to avoid the older data.

  composite(List-List) is the best bet - but you don't need a clue to one of these two columns because any data segment will be only the data for a given client and task; the only clues you need are on the other predicates, and you can see that local indexing for columns is all you need.

  The threat of execution for local indexing appears only if you have specified (a) only the task id and some other predicate you must then probe 200 segments data and index; or (b) If you specified either customer or task because that would require a probe of 2 000 data and index segments.  If you have specified a client then the additional work done by 10 probes index would probably acceptable to avoid global indexing.

  Concerning

  Jonathan Lewis

• Browsers without taking into account the fixed font size, developing container

  I have a layout and in the right column I have a block of text aligned to justify this block when displayed in different browsers does not maintain the size of the font 11px but changes and changes differently in different browsers.  I tried to specify the size in divs which could affect it does not seem to do much, ideas on how to limit it to the specified size?

  Thank you

  Not sure that I understand very well your question, but maybe this will help you:

  http://ALT-Web.com/demos/font-sizes.shtml

  If what you want is your

  text in div #foo be 11px, try this in your CSS:

  p #foo {do-size: 11px}

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB

• IE is without taking into account some elements of my css, as images of bg, made weird gaps

  Here is my site, but ignore the home page, there is a slide show out there that does not work in IE or Safari: http://www.hopeedwards.com/TEST_new_website/Hope_website/assorted_art.htm
  Everything is fine in Firefox but in Internet Explorer (6) white repeat the background image in my middle tier div comes through at all on any of the pages and in the comments & Contact page there is a big gap between the NAV and the content below, and everything is pushed to the left. Yesterday, I added a few things to some div tags "display: inline" in order to stop IE doubling all margins and shoving all the tags div at the bottom of page. I don't know if it's relevant.
  
  Completely, I'd appreciate any help! I use Dreamweaver CS3 on an Intel Mac based.

  Jen_26059 wrote:
  > Here is my site, but ignore the home page, there is a slide show out there that
  > does not work in IE or Safari:
  > http://www.hopeedwards.com/TEST_new_website/Hope_website/assorted_art.htm
  > This is great in Firefox, but Internet Explorer (6) white
  > expandable background picture in my middle layer div comes about thanks to
  > about pages

  Once more good old IE is buggy. This time its something called "haslayout".

  Give your #copy

  the same width as your #container

  953px;

  Also add a nonbreaking space to your compensation

  for Mac, Firefox 1.

   

  If you add that creates havoc in any other browser, replace the

  with:

  
  

  and in the About & Contact page there is a big gap between
  > the net asset value and the content below, and everything is pushed to the left.

  I can't help you there, the code is so messy, it would take a month of
  Sunday to sort.

  For one, you have twotags in the page that will not help.

  I re - run the page and test step by step.

  Yesterday, I
  > added some things to some div tags "display: inline" in order to stop IE from
  > doubling all margins and pushing all the way divs to the bottom of the page. I don't know if
  > It's relevant.

  This isn't.

• Why windows Explorer keep crash since I installed internet explorer 9

  the answer to "immediately after installing IE9 Windows explore crashes - Vista SP2" does not actually to answer the question for me as I will be unable to upgrade to Windows 7 for a long time yet. I can't even uninstall IE9 because I can't in the Panel, nor can I access the restore points. How can I uninstall IE9 - is there a solution to this problem that doesn't involve the upgrade to Windows 7?

  Hello

  Thank you for your response.

  I decided earlier, however,

  just uninstall IE9 and go

  Back to IE8 using rstrui.exe

  to access the system restore.