Taking USB Flash drive supported Mass Storage Class Ver 1.1

Similar Questions

• Laptop HP 15-R084NG: is it possible to copy a HP recovery on another USB flash drive support?

  Hello.

  Just a few questions please:

  1. when I do only once "HP Recovery Media" to a USB key, I can then 'copy' and 'paste' on another USB flash drive as long as the 2nd flash player has sufficient capacity?

  The recovery still works well?

  I ask this question in case I have to change to another USB flash drive and I am aware I can only have a copy of the HP recovery.

  2. If this is the case, I then can also make a backup on a Western Digital external drive so that in case of malfunction of the USB flash drive, can I still transfer files to another USB flash drive?

  Thanks in advance for the answer.

  Best regards.

  Hello

  Copy / paste do not work. Please, try the following method:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/this-is-how-to-make-a-2nd-set-of-recovery-disks/TD-p/1694703

  Kind regards.

• How can Kenichi Watanabe, I put my music on iTunes on an external USB Flash drive please?

  I have a new USB Flash Drive 32 DB/GB and I want to put all my music in my iTunes top.  I saw instructions on apple, but they do not make sense.  Help, please.  Thank you.

  Hello again...  It depends on the reason for this.  You then use the USB flash drive as internal storage location for its iTunes Media , because iTunes folder that you run lack of space on the disk?  Or maybe what you are doing to use the USB FlashDrive with a car audio system?

  In the previous topic, I think you said that you use a Mac (not a Windows PC) to run iTunes, is that correct?

• How to boot from simulated USB (flash drive) mass storage device?

  I do some development work on the anaconda, the Installer used by Red Hat Enterprise Linux and reconstructions based off of him.  I'm testing support of USB flash drive facilities and would rather test my changes using image files from a USB drive physical - a bit like editing an .iso image to a CD instead of using a physical CD of closure.

  I found a reference to the Framework of Linux-USB Gadget API, which looked exactly like what I was looking for.  After the reconstruction of the almond, I was able to run:

  • modprobe dummy_hcd
  • modprobe g_file_storage file = CentOS - 6.2 - i386 - netinstall.iso

  After that, the office immediately get the image as if I had actually plugged a USB stick with the same content.

  I am also able to connect this virtual USB device to a virtual machine, but when I start the virtual machine, it has no option to boot from the virtual USB device.

  Any ideas?

  VMware Workstation does not directly support boot from USB but you can use a third-party utility called Plop Boot Manager to boot a bootable USB disk and you may be.

• Support USB Flash drive in Linux guest

  Hello

  I'm a Linux Noob and I have a question. I have a guest of CENTOS 5.4 installed and I was wondering if it is possible to mount my USB physical somehow? I have a USB flash drive formatted in FAT32 and I would like to be able to view the files.

  Just add the controller with the virtual material editor - nothing complicated

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• USB Flash Drive 16 GB Write Protected v210w

  Hello!

  After a week of use, my new USB Flash Drive 16 GB v210w key appears as write protected.

  Cannot add a new file, delete the old file, same format any USB Flash drive.

  I have tried various procedures described on the forums, as

  • My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePoliciesWriteProtect > data of the value set to 0
  • \devise\harddisk1\dr2

  and the normal formatting (properties > Format) and the low level of implementation in the shape tools, as

  • http://www.Softpedia.com/progDownload/HDD-low-level-format-tool-download-37794.html
  • http://www.Apacer.com/en/support/downloads/Repair_v2.9.1.1.zip
  • http://www.transcendusa.com/products/online_recovery.asp
  • HP USB disk storage format SP27608 tool - 2.1.8.exe

  but in vain.
  
  That's happened? How to resume normally using my USB Flash drive?

  I use a mini 311c on XP SP3.

  Thank you for your help and best regards.

  
  -rei_vilo

  Hello!

  Get help from hp support.

  The technician suggested I make a test disc with http://panasonic.jp/support/global/cs/sd/download/sd_formatter.htmlformat.

  He failed and prompted the 'Protected disc' message, so my USB Flash drive was considered dead.

  I went back to my dealer and proceeded to an Exchange. The dealer was not surprised: according to him, large USB Flash Drives seems to be subject to this kind of malfunction.

  I hope to be luckier with the new!

• Presario v3000 think usb flash drive is a CD-ROM/dvd-rom; recognizes any CD

  Presario v3000 running XP PRO sp3

  Hello

  My CD-ROM/DVD-ROM drive disappeared from the Manager of devices and Windows Explorer about 2 weeks; I tried all the fixes the base of knowledge without result. When I put a CD in I can hear it running, but nothing happens, even when Windows says it's looking for a CD.

  However, when I put a Flash drive on a port USB, "reader of CD/DVD-ROM" appears in the device, Manager who think that Flash is a CD-ROM/DVD-ROM called drive'Sandisk U3 cruzer Micro USB device'.  Dev man lists the Flash exactly in the same way under ""hard drives "; " under "Bus USB controllers ' it is listed as'USB mass storage device'.

  Even with the USB flash drive, "'my computer ' still does not show aCD-ROM/DVD-ROM drive, but it puts a CD icon next to "U3 system", which he calls"(e) ". "

  Here's what looks like 'My Computer' in Windows Explorer:

  (drive icon)   + Local Disk (C:)

  (drive icon)  + HP_RECOVERY (:)) d )

  (cd icon) System U3 (e :)) )

  (drive icon)  + PKBACK #001 (f)

  I am so very confused and mentally exhausted.  Can someone please help me straighten this mess?

  Thank you...

  Liliane

  PS my BIOS says for what it's worth, that my OS is Vista, when in fact it is XP PRO!

  Try this:

  1. click on start

  2. click on run

  3. type in diskmgmt.msc

  4. in the lower pane, scroll down until you see your device

  5. right click, choose paths and change the drive letter

  6. click on edit

  7. change if necessary

  Hope this helps

  Restart the computer and check to see if the same thing happens.

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• photos of transfer from windows on a USB flash drive photo gallery

  How to transfer photos from windows photo gallery or my images in a USB flash drive.

  Thanks for your reply, I did as you suggested and tried this. USB appears as a removable drive!

  ======================================
  OK... is it recognized as a hard drive or a mass storage device?

  If you have more than one USB port, try the others.

  If you have several USB devices... it can help
  Unplug everything except the Flash Player.

  When you insert the flash drive into a port USB AutoPlay starts?

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Trying to recover a Windows 8 compatible USB flash drive

  Can someone help me please? I think that I have a hard drive failure or a fault. It specifies the drive name: TOSHIBA MQ01ABF050 and C:\;D:\ volume. I have a HP Pavilion Sleekbook with windows 8.1 14 TS (I upgraded from the Windows 8 which came with the laptop) and I unconsciously created a recovery image on a USB compatible of Windows 8 successfully when I lived already problems with my portable hard drive. Later, I discovered that it is not recommended to create a recovery image on a USB compatible of windows 8. I hope to just get back to factory settings and wipe out all my files if it can help me my laptop in working condition I have already backed up my important documents to USB. My next question is 1.) The recovery image that I created with the usb it's 8 compatible windows won't work if I try to do a factory reset? 2.) the recovery image I created everything with the mistakes already, will be technically 'clean', which means he has everything needed for a laptop running once I replace my hard drive or perform recovery with hard flow drive up? (3.) I will be able to restore from the recovery partition? or affect the hard drive failure that animate as well? Your help would be greatly appreciated! Thanks in advance to those who can help me.

  Note: my USB flash drive is also compatible with windows 8 AND 7. Is it possible to transfer only in just a usb compatible windows 7 if I encounter problems because of the compatibility of windows 8 flash player, I used for the creation of recovery image. Thank you.

  The question of compatibility you're talking about is one where many flash drives are seen as a local instead of removable storage disk - and HP Recovery Manager wouldn't use it to create a recovery media. Since you were able to create your USB support has been recognized as compatible for use. You should be fine with recovery use.

• USB flash drive shows only not in Windows Explorer.

  Hello

  I looked through all the other posts of undetectable usb flash drives but not talked about "Device Manager", where I can see the "F:" drive - I know not how to access because its not visible anywhere else.

  It is a simple flash 4 GB dongle, I'm on Windows 7 - it used to work properly and appear in my computer, but this isn't all of a sudden. It does not appear on other computers, but I can see it under ' devices and printers under "Mass Storage Device" - and "navigation files" gives me a gray would be on "removable disk F:"

  Have a formatting or something by accident or changed a setting that makes it invisible. Or is it just screwed!

  Help, please!

  Original title: can not access a drive USB flash but visible in "Devices".

  Hello Justin,

  Thank you for your response.

  Because the problem is specific to a specific USB key, I recommend you contact the
  Manufacturer and check with them.

• How to install Windows 7 on my USB flash drive, just in case my computer crashes and I have to re - install?

  How to install windows 7 on my usb flash drive just incase my computer crashes and need to refurbish? can someone help me please?

  original title: help!

  Windows 7 does not support installation on external storage such as a USB Flash drive devices. You can back up your installation of Windows 7 on a hard drive external that you can restore in case your system becomes unstable. Please see the following for instructions on how to use the Image of the system:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  You have to an external hard drive.

• p6710f, crashes at startup when installing 2 Cruzer of Sandisk USB flash drives

  Hello

  Question: My HP p6710f desktop computer crashes at startup when 2 Sandisk Cruzer USB drive (8 GB/FAT32, a 16 GB/FAT32) is installed in a hub Targus USB2 multiport (connected to the back USB port of p6710f).

  With USB flash drives installed, from a market boot: Boot past the BIOS (blue) screens, then 'underline' cursor blinks just on the black screen and hangs.  It does not start a Win7 from the hard drive.

  With USB flash drives installed, from a bunch of market: If in the (blue) BIOS screen, I hit the ESC and select the hard disk device (which is the top of the "boot device") then boot proceeds normally and boots Win7 from the hard drive.

  If I do the trunk with the key removed USB, the boot process proceeds normally and starts Win7 disk.

  I have flashed to the latest ROM system from the support page of p6710f.  Who really seemed to solve the problem for a while, but the hook finally reappeared.

  I copied all the data on USB flash drives, formatted their 'rapid' and copied all the data back.  No joy.

  Here is a link to the Sandisk Cruzers.  I deleted all the files on U3/etc. out of them, I want all of the space available on them for auxiliary data storage, I can't boot from them:

  SanDisk Cruzer

  Thanks for any help,

  -Gary K

  Hello

  Probably of the order of startup in the BIOS has been set to use the USB is/is the first choice. Please, move them down. Here's how:

  http://support.HP.com/us-en/document/c00364979

  Kind regards.

• WiFi connectivity weird when I plug in the USB Flash drive?

  I found this WiFi connection problem a few days ago, when I plugged a USB Flash drive in "USB port right side' of my MacBook Pro.

  Every time when USB , WiFi won't work - the connection is lost and can not connect to any hotspot even turn the WiFi market.

  I found more weird, ONLY this brand and model key USB could be the abnormal Mac WiFi.

  

  This problem will not happen to another USB port even I put the Flash drive in the left side, USB port, weird isn't?

  Conclusion, this flash drive cannot be used with USB port on the RIGHT side, another USB port works fine. If WiFi don't work.

  All other USB devices I've owned are working very well on the USB ports on the right or left side.

  Could Apple support or any helps me to understand why this happen?

  PS. I had the Apple's Diagnostics and received a message "no problem found".

  PS #2. Right - same USB port side and next to the HDMI port on MacBook Pro 13 "model 2015" (snack for someone who confuse average left or right)

• Some USB flash drives REFUSE to work in this 40TL963B

  Hi all. I recently bought a new 40TL963B and so far I have found nothing wrong with her.

  Except that... when I listen to it all the Satellite channels, I noticed thay were very different from my FreeSat box. Duplicate the layers, randomly arrested... etc. It made me want to not use the built-in satellite feature.

  However, I found a program called ToshibaEdit which allowed me to manually change all the digital channels on the TV. Grand... I though. Until I met this problem-->

  Inorder to change the ads, you must copy the TV channels on a USB flash drive, you can edit them on your PC. Now, it took me AN HOUR to do, because of two flash readers I used, none of them worked... I kept getting a "Write Fail" error. WTF?

  The disks are formatted in FAT32, one is a 8 GB is 2 GB.

  Finally, I tried an external 2.5 "USB 120 GB hard drive. Even if the disc is defective... This WORKER. I expect flash drives to work, to be honest, but all of them... the external USB hard drive worked.

  In any case, I spent another hour sort channels, until I was ready to transfer the data back. And. Yes... the same problem. This time, I received an error "failed to read". Again, tried the external USB HDD... worked the first time.

  Now, this HARD drive is faulty, so he'll be thrown... so I'm going to need a flash player to do it again if something happens.

  And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE? In addition, the same flash drive that I tried to copy the data from digital channel with was also used for a backup of the Firmware... and it WORKED perfectly. It works also for use with the media player.

  While this TV has a hatred of Flash drives all of a sudden?
  Anyone can shed some light on this?

  In addition, very quickly, TV seems to lose its TV settings every time that I bring the TV out of Eve. I'm going to the TV Dynamic and adjust all the settings, but he returned to AutoView and all settings back to 0. Is it a fault or is there something I need to do to 'save' the settings per channel?

  Any help at all will be appreciated greatly.

  Hello

  > And then... can ANYONE tell me why on Earth two appropriate, fully working almost brand new USB flash drives REFUSE to work in this TV, but a former, fairly well defective USB external drive MADE?

  AFAIK the 40TL963B TV supports a common HS USB 2.0 interface and memory flash can be formatted in FAT16 or FAT32 file system. So there is no specific requirement for USB flash memory

• NB100 - How can I reinstall OS from USB flash drive

  My laptop TOSHIBA NB 100 has no CD-DVD player.
  Operating system is Windows XP Home SP2.

  Operating system won't start.

  Laptop start not at all so I can't run any kind of test when I turn it on.

  The thank you screen come on it says launch safe mode, the networking of safe mode, safe mode comand prompt or start windows normally. But no matter who I chose, that it does not start it only goes to Windows and looks like its starts but then shows the blue Windows screen & stays there.

  So I want to reload Windows from my USB flash drive.
  The BIOS boot sequence is the USB HDD - FDD - FD - CD memory.

  What are the steps for loading Windows USB flash drive?

  If that does not work then I want to connect another laptop with Windows CD in the CD - DVD drive laptop.
  Will this work? The laptop will use the Windows CD in the drive of the laptop to load the operating system?
  How to make this connection?

  Hello

  You usually have an external USB CD/DVD drive to boot from the Windows XP disc or the Toshiba recovery disc.

  But there is a method that allows you to install Win XP using the 2 GB USB key.
  This is possible because the NB100 BIOS supports booting from USB key.

  Pease check this Web page:

  + Installation of Windows XP using a USB Flash Drive.
  http://www.pctipsbox.com/Installing-Windows-XP-using-a-USB-flash-drive/

  Hope it could be useful.