talk to speaks VPN without GRE

Similar Questions

• SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client

  Hello everyone,

  I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).

  I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.

  Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?

  Waiting for your help.

  Thanks in advance.

  Samrat.

  "Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).

  Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.

• GRE tunnels will not come on VPN IPsec/GRE

  Hi all

  We have 400 + remote sites that connect to our central location (and a backup site) using Cisco routers with vpn IPSec/GRE tunnels.  We use a basic model for the creation of tunnels, so there is very little chance of a bad configuration on each router.  Remote sites use Cisco 831 s, central sites use Cisco 2821 s.  There is a site where the tunnels WILL refuse just to come.

  Routers are able to ping their public IP addresses, so it is not a routing problem, but gre endpoints cannot ping.  There is no NATing involved, two routers directly accessing the Internet.  The assorded display orders seem to indicate that the SAs are properly built, but newspapers, it seems that last part just don't is finished, and the GRE tunnels come not only upward.

  The attached log file, it seems that both its IPSEC & ISAKMP are created @ 00:25:14, then QM_PHASE2 end @ 00:25:15.

  00:25:15: ISAKMP: (0:10:HW:2): node error 1891573546 FALSE reason for deletion "(wait) QM.
  00:25:15: ISAKMP: (0:10:HW:2): entrance, node 1891573546 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
  00:25:15: ISAKMP: (0:10:HW:2): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
  00:25:15: ISAKMP (0:268435467): received 208.XX packet. Dport 500 sport Global 500 (I) QM_IDLE yy.11
     
  00:25:15: IPSEC (key_engine): had an event of the queue with 1 kei messages
  00:25:15: IPSEC (key_engine_enable_outbound): rec would prevent ISAKMP
  00:25:15: IPSEC (key_engine_enable_outbound): select SA with spinnaker 1572231461/50
  00:25:15: ISAKMP: (0:11:HW:2): error in node-1931380074 FALSE reason for deletion "(wait) QM.
  00:25:15: ISAKMP: (0:11:HW:2): entrance, node-1931380074 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
  00:25:15: ISAKMP: (0:11:HW:2): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
  00:25:15: IPSEC (key_engine): had an event of the queue with 1 kei messages
  00:25:15: IPSEC (key_engine_enable_outbound): rec would prevent ISAKMP
  00:25:15: IPSEC (key_engine_enable_outbound): select SA with spinnaker 310818168/50

  I don't have the remote router log file, and is very long, so I joined her.  Before that I captured the log file, I enabled debugging ipsec & isakmp and immediately authorized the SAs.

  Assorted useful details and matching orders of show results:

  Cisco IOS Software, C831 (C831-K9O3SY6-M), Version 12.4 (25), RELEASE SOFTWARE (fc1)

  There are 2 connections of IPSEC/GRE tunnel:

  Tunnel101: KC (208.YY. ZZ.11) - remote control (74.WW. XX.35)
  Tunnel201: Dallas (208.XX. YY.11) - remote control (74.WW. XX.35)

  Site-382-831 #sho ip int br
  Interface IP-Address OK? Method State Protocol
  FastEthernet1 unassigned YES unset down down
  FastEthernet2 unassigned YES unset upward, upward
  FastEthernet3 unassigned YES unset upward, upward
  FastEthernet4 unassigned YES unset upward, upward
  Ethernet0 10.3.82.10 YES NVRAM up up
  Ethernet1 74.WW. XX.35 YES NVRAM up up
  Ethernet2 172.16.1.10 YES NVRAM up up
  Tunnel101 1.3.82.46 YES NVRAM up toward the bottom<>
  Tunnel201 1.3.82.62 YES NVRAM up toward the bottom<====  ="">
  NVI0 unassigned don't unset upward upwards

  Site-382-831 #.
  Site-382-831 #sho run int tunnel101
  Building configuration...

  Current configuration: 277 bytes
  !
  interface Tunnel101
  Description % connected to the 2nd KC BGP 2821 - PRI - B
  IP 1.3.82.46 255.255.255.252
  IP mtu 1500
  IP virtual-reassembly
  IP tcp adjust-mss 1360
  KeepAlive 3 3
  source of tunnel Ethernet1
  destination of the 208.YY tunnel. ZZ.11
  end

  Site-382-831 #.

  Site-382-831 #show isakmp crypto his
  status of DST CBC State conn-id slot
  208.XX. YY.11 74.WW. XX.35 QM_IDLE ASSETS 0 11
  208.YY. ZZ.11 74.WW. XX.35 QM_IDLE 10 0 ACTIVE
  Site-382-831 #.

  Site-382-831 #.
  Site-382-831 #show detail of the crypto isakmp
  Code: C - IKE configuration mode, D - Dead Peer Detection
  NAT-traversal - KeepAlive, N - K
  X - IKE extended authentication
  PSK - GIPR pre-shared key - RSA signature
  renc - RSA encryption

  C - id Local Remote I have VRF status BA hash Auth DH lifetime limit.
  11 74.WW. XX.35 208.XX. YY.11 ACTIVE 3des sha psk 1 23:56:09
  Connection-id: motor-id = 11:2 (hardware)
  74.WW 10. XX.35 208.YY. ZZ.11 ACTIVE 3des sha psk 1 23:56:09
  Connection-id: motor-id = 10:2 (hardware)
  Site-382-831 #.

  Site-382-831 #.
  Site-382-831 #show crypto ipsec his

  Interface: Ethernet1
  Tag crypto map: IPVPN_MAP, local addr 74.WW. XX.35

  protégé of the vrf: (none)
  ident (addr, mask, prot, port) local: (74.WW. XX.35/255.255.255.255/47/0)
  Remote ident (addr, mask, prot, port): (208.YY. ZZ.11/255.255.255.255/47/0)
  current_peer 208.YY. ZZ.11 port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 2333, #pkts encrypt: 2333, #pkts digest: 2333
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  #send 21, #recv errors 0

  local crypto endpt. : 74.WW. XX.35, remote Start crypto. : 208.YY. ZZ.11
  Path mtu 1500, mtu 1500 ip, ip mtu IDB Ethernet1
  current outbound SPI: 0x45047D1D (1157922077)

  SAS of the esp on arrival:
  SPI: 0x15B97AEA (364477162)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2004, flow_id: C83X_MBRD:4, crypto card: IPVPN_MAP
  calendar of his: service life remaining (k/s) key: (4486831/1056)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0x45047D1D (1157922077)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2003, flow_id: C83X_MBRD:3, crypto card: IPVPN_MAP
  calendar of his: service life remaining (k/s) key: (4486744/1056)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:

  protégé of the vrf: (none)
  ident (addr, mask, prot, port) local: (74.WW. XX.35/255.255.255.255/47/0)
  Remote ident (addr, mask, prot, port): (208.XX. YY.11/255.255.255.255/47/0)
  current_peer 208.XX. YY.11 port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 2333, #pkts encrypt: 2333, #pkts digest: 2333
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  #send 21, #recv errors 0

  local crypto endpt. : 74.WW. XX.35, remote Start crypto. : 208.XX. YY.11
  Path mtu 1500, mtu 1500 ip, ip mtu IDB Ethernet1
  current outbound SPI: 0xE82A86BC (3895101116)

  SAS of the esp on arrival:
  SPI: 0x539697CA (1402378186)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2008, flow_id: C83X_MBRD:8, crypto card: IPVPN_MAP
  calendar of his: service life remaining (k/s) key: (4432595/1039)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0xE82A86BC (3895101116)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 2001, flow_id: C83X_MBRD:1, crypto card: IPVPN_MAP
  calendar of his: service life remaining (k/s) key: (4432508/1039)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:
  Site-382-831 #.

  Site-382-831 #.
  Site-382-831 #show crypto ipsec his | Pkts Inc. | life
  #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  calendar of his: service life remaining (k/s) key: (4486831/862)
  calendar of his: service life remaining (k/s) key: (4486738/862)
  #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  calendar of his: service life remaining (k/s) key: (4432595/846)
  calendar of his: service life remaining (k/s) key: (4432501/846)
  Site-382-831 #.

  Site-382-831 #.
  Site-382-831 #show crypto isakmp policy

  World IKE policy
  Priority protection Suite 10
  encryption algorithm: three key triple a
  hash algorithm: Secure Hash Standard
  authentication method: pre-shared Key
  Diffie-Hellman group: #1 (768 bits)
  lifetime: 86400 seconds, no volume limit
  Default protection suite
  encryption algorithm: - Data Encryption STANDARD (56-bit keys).
  hash algorithm: Secure Hash Standard
  authentication method: Rivest-Shamir-Adleman Signature
  Diffie-Hellman group: #1 (768 bits)
  lifetime: 86400 seconds, no volume limit
  Site-382-831 #.

  Site-382-831 #show crypto card
  "IPVPN_MAP" 101-isakmp ipsec crypto map
  Description: at the 2nd KC BGP 2821 - PRI - B
  Peer = 208.YY. ZZ.11
  Extend the PRI - B IP access list
  access list PRI - B allowed will host 74.WW. XX.35 the host 208.YY. ZZ.11
  Current counterpart: 208.YY. ZZ.11
  Life safety association: 4608000 Kbytes / 3600 seconds
  PFS (Y/N): N
  Transform sets = {}
  IPVPN,
  }

  "IPVPN_MAP" 201-isakmp ipsec crypto map
  Description: 2nd Dallas BGP 2821 - s-B
  Peer = 208.XX. YY.11
  Expand the list of IP SEC-B access
  s - B allowed will host 74.WW access list. XX.35 the host 208.XX. YY.11
  Current counterpart: 208.XX. YY.11
  Life safety association: 4608000 Kbytes / 3600 seconds
  PFS (Y/N): N
  Transform sets = {}
  IPVPN,
  }
  Interfaces using crypto card IPVPN_MAP:
  Ethernet1
  Site-382-831 #.

  Tunnel between KC & the remote site configuration is:

  Distance c831 - KC

  crypto ISAKMP policy 10
  BA 3des
  preshared authentication
  !
  PRI-B-382 address 208.YY isakmp encryption key. ZZ.11
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac IPVPN
  transport mode
  !
  IPVPN_MAP 101 ipsec-isakmp crypto map
  Description of 2nd KC BGP 2821 - PRI - B
  set of peer 208.YY. ZZ.11
  game of transformation-IPVPN
  match address PRI - B
  !
  interface Tunnel101
  Description % connected to the 2nd KC BGP 2821 - PRI - B
  IP 1.3.82.46 255.255.255.252
  IP mtu 1500
  KeepAlive 3 3
  IP virtual-reassembly
  IP tcp adjust-mss 1360
  source of tunnel Ethernet1
  destination of the 208.YY tunnel. ZZ.11
  !
  interface Ethernet0
  private network Description
  IP 10.3.82.10 255.255.255.0
  IP mtu 1500
  no downtime
  !
  interface Ethernet1
  IP 74.WW. XX.35 255.255.255.248
  IP mtu 1500
  automatic duplex
  IP virtual-reassembly
  card crypto IPVPN_MAP
  no downtime
  !
  PRI - B extended IP access list
  allow accord 74.WW the host. XX.35 the host 208.YY. ZZ.11
  !

  KC-2821 *.

  PRI-B-382 address 74.WW isakmp encryption key. XX.35
  !
  PRI-B-382 extended IP access list
  allow accord 208.YY the host. ZZ.11 the host 74.WW. XX.35
  !
  IPVPN_MAP 382 ipsec-isakmp crypto map
  Description % connected to the 2nd KC BGP 2821
  set of peer 74.WW. XX.35
  game of transformation-IPVPN
  match address PRI-B-382
  !
  interface Tunnel382
  Description %.
  IP 1.3.82.45 255.255.255.252
  KeepAlive 3 3
  IP virtual-reassembly
  IP tcp adjust-mss 1360
  IP 1400 MTU
  delay of 40000
  tunnel of 208.YY origin. ZZ.11
  destination of the 74.WW tunnel. XX.35
  !
  end

  Any help would be much appreciated!

  Mark

  Hello

  logs on Site-382-831, only see the crypt but none decrypts, could you check a corresponding entry on the peer and see if has any questions send return traffic?

  Site-382-831 #show crypto ipsec his | Pkts Inc. | life
  #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  calendar of his: service life remaining (k/s) key: (4486831/862)
  calendar of his: service life remaining (k/s) key: (4486738/862)
  #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
  #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  calendar of his: service life remaining (k/s) key: (4432595/846)
  calendar of his: service life remaining (k/s) key: (4432501/846)
  Site-382-831 #.

  Kind regards

  Averroès.

• IKEv2 VPN without using licensed SSL? (ASA-5512)

  Hi all

  I enabled Cisco 'Anyconnect Premium peers' for customer less connections vpn ssl, the obvious snag is that for Anyconnect ikev2 sessions he wants to use the SSL license pool instead of the IPSEC pool (which I have a lot of connection for 'peers VPN Total: 250' licenses.

  * Is it possible to configure Anyconnect to connect through IPSEC and use licensed IPSEC (while keeping Premium Anyconnect active peers)?

  * Should I consider 3rd third-party vpn outside Anyconnect clients?

  CyA

  Craig

  Remote access to sessions with IKEv2 will always consume a Premium license. Change for another customer will not help unless you change to a customer that uses the legacy technology with EasyVPN. But this should not be the solution.

  If you enable AnyConnect Essentials, you can use AnyConnect with IPSec the platform limit, but you cannot use the features award (as a clientless) more at the same time.

  In a situation like that where many AnyConnect-Sessions are necessary and only a couple of sessions without client, I installed AnyConnectEssentials on the ASA principal and deployed an another ASA only for VPN without client. Due to the high cost of premium VPN licenses, is much cheaper then buying the Premium licenses for all VPN users.

  Sent by Cisco Support technique iPad App

• AnyConnect and SSL - VPN without client

  Are there problems in running Cisco AnyConnect and SSL - VPN without client side by side?

  I am currently looking into adding features for an ASA AnyConnect who currently set up to operate without SSL - VPN client. The system without client is not removed. I don't know how to set it up, I wonder if someone has already set up this or if there is no problem with this Setup?

  Hi Daniel

  It's a little complicated if you want a granular authentication and authorization, but it works.

  I'm running an ASA with IPSec, SSL Client and clientless SSL.

  Each of these virtual private networks with user/one-time-password name and certificate based authentic.

  The main challenge is to put in place its own structure of profile cards, connection profiles, group policies and dynamic access policies.

  Feel free to ask questions...

  Stephan

• ASA 5510 - SSL VPN without CLIENT - remote desktop

  Is it possible to make a desktop connection remote clientless SSL VPN with a browser? I know that I can do with client anyconnect SSL but I can do without a customer?

  Yes it is possible, you must first make sure that you have transferred to the ASA RDP plugin. When you are editing you bookmarks, you will see an option for RDP.

• VPN without client, RDP Audio

  Hello.

  I use the VPN client without client to connect to our ASA5510 to 8.3. I use remote desktop to connect to an internal machine. It works very well with the ActiveX and Java.

  One thing I want, is to leave the room audio to the remote computer.

  Is there a command line for this switch? As "geometry", "console" and so on.

  Peter

  Hi Peter,.

  RDP Audio redirection exists but only for the ActiveX version of the plugin, not the Java one.
  
  Here is how you should define your bookmark if you want to use this feature:
  
  

  rdp:///?audio=X

  
  
  Where X can be:
  
  

  0: Redirect remote sounds to the client computer.

  1: Play sounds at the remote computer.

  2: Disable sound redirection; do not play sounds at the remote server.

  Kind regards

  Nicolas

• Vs VPN without client Anyconnect

  Hi guys,.

  On the ASA 5500 series, can someone please tell me if the clientless VPN is identical to Anyconnect? Any help will be greatly appreciated.

  Thank you

  Lake

  Lake

  Clientless VPN is a virtual private network that does not use a client to establish VPN.

  AnyConnect is a VPN client.

  so Clientless VPN isn't the same thing as AnyConnect. On the SAA if you do without VPN client then the user's browser to connect to the ASA, and basically the ASA provides the VPN service through the browser.

  HTH

  Rick

• How to set up a Lan to Lan VPN without using your external IP address?

  I have two 28 subnets A & B.

  My PIX and ASA outside interface addresses are both in A subnet.

  I am in the middle of a migration of the PIX to ASA and need to use the PIX outside of the address of the interface on the ASA for the last two remaining lan to lan VPN.

  I do like that because the sellers of these virtual private networks to connect to are huge dinosaurs IT and the aaages to get their sh * t tri... This means that I have to pass the IP address to my ASA, so I can't sentence have change for a new IP peer.

  I tried to figure out how to set a specific my counterpart VPN IP address but I can't figure out how...

  I even physically connected a second ethernet port and tried to give a similar IP in the same range, which it says it is not possible to have both outside the IP addresses on the same subnet.

  Hello

  It is not possible to have an IP address "secondary" on the physics/logic interface of a Cisco firewall.

  And as you've noticed, you cannot configure the same subnet on 2 different interface either.

  We are talking about such a large configuration that you want to just migrate from completely to the ASA PIX and make a switch during a maintenance window?

  Couldn't you just pass the ASAs 'outside' IP address address to that on the PIX and move the ASAs 'outside' of the PIX? Or not the ASAs "outside" IP address already some configured related to what makes this impossible?

  -Jouni

• Tunnel VPN IPSEC Gre of the router in the branch office by Pix to the router HQ

  Hi all

  I tried to get this scenario to work before I put implement but am getting the error on router B.

  

  01:05:38: % CRYPTO-6-IKMP_MODE_FAILURE: fast processing mode failed with the peer to 83.1.16.1

  Here are the following details for networks

  Router B

  Address series 82.12.45.1/30

  fast ethernet 192.168.20.1/24 address

  PIX

  outside the 83.1.16.1/30 interface eth0

  inside 192.168.50.1/30 eth1 interface

  Router

  Fast ethernet (with Pix) 192.168.50.2/30 address

  Loopback (A network) 192.168.100.1/24 address

  Loopback (Network B) 192.168.200.1/24 address

  Loopback (Network C) 192.168.300.1/24 address

  Is could someone please tell me where im going wrong as I read the explanation of the error and it points to political unmaching. This has confused me like the two counterparts seem to have the same settings.

  Config router B

  ======================

  name of host B
  !
  Select the 5 secret goat.
  !
  username 7 privilege 15 password badger badger
  iomem 15 memory size
  IP subnet zero
  !
  !
  no ip domain-lookup
  IP - test.local domain name
  !
  property intellectual ssh delay 30
  property intellectual ssh authentication-2 retries
  !
  crypto ISAKMP policy 5
  md5 hash
  preshared authentication
  Group 2
  ISAKMP crypto key VPN2VPN address 83.1.16.1
  !
  86400 seconds, duration of life crypto ipsec security association
  !
  Crypto ipsec transform-set esp - esp-md5-hmac VPN
  !
  crypto map 5 VPN ipsec-isakmp
  defined by peer 83.1.16.1
  PFS group2 Set
  match address VPN
  !
  call the rsvp-sync
  !
  interface Loopback10
  20.0.2.2 the IP 255.255.255.255
  !
  interface Tunnel0
  bandwidth 1544000
  20.0.0.1 IP address 255.255.255.0
  source of Loopback10 tunnel
  tunnel destination 20.0.2.1
  !
  interface FastEthernet0/0
  Description * inside the LAN CONNECTION *.
  address 192.168.20.1 255.255.255.0
  IP nat inside
  automatic duplex
  automatic speed
  !
  interface Serial0/0
  Description * INTERNET ACCESS *.
  IP 88.12.45.1 255.255.255.252
  NAT outside IP
  VPN crypto card
  !
  interface FastEthernet0/1
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  Router eigrp 1
  network 20.0.0.0
  No Auto-resume
  !
  overload of IP nat inside source list NAT interface Serial0/0
  IP classless
  IP route 0.0.0.0 0.0.0.0 Serial0/0
  no ip address of the http server
  !
  !
  NAT extended IP access list
  deny ip 192.168.20.0 0.0.0.255 192.168.200.0 0.0.0.255
  deny ip 192.168.20.0 0.0.0.255 192.168.300.0 0.0.0.255
  deny ip 192.168.20.0 0.0.0.255 192.168.100.0 0.0.0.255
  ip licensing 192.168.20.0 0.0.0.255 any
  list of IP - VPN access scope
  permit ip host 20.0.2.2 20.0.2.1
  !

  Config PIX

  ====================

  PIX Version 7.2 (4)
  !
  pixfirewall hostname
  names of
  name 20.0.2.2 B_LOOP
  name 88.12.45.1 B_WANIP
  !
  interface Ethernet0
  Description * LINK to ISP *.
  nameif outside
  security-level 0
  IP 83.1.16.1 255.255.255.252
  !
  interface Ethernet1
  Description * LINK TO LAN *.
  nameif inside
  security-level 100
  IP 192.168.50.1 255.255.255.252
  !
  passive FTP mode
  the ROUTER_LOOPS object-group network
  network-object 20.0.2.0 255.255.255.252
  access allowed extended VPN ip host 20.0.2.1 B_LOOP list
  access-list extended SHEEP permit ip host 20.0.2.1 ROUTER_LOOPS object-group
  Access ip allowed any one extended list ACL_OUT
  pager lines 24
  Outside 1500 MTU
  Within 1500 MTU
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global (1 interface external)
  NAT (inside) 0 access-list SHEEP
  NAT (inside) 1 192.168.50.0 255.255.255.252
  NAT (inside) 1 192.168.50.0 255.255.255.0
  Access to the interface inside group ACL_OUT
  Route outside 0.0.0.0 0.0.0.0 83.1.16.2 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp - esp-md5-hmac VPN
  86400 seconds, duration of life crypto ipsec security association
  VPN 5 crypto card matches the VPN address
  card crypto VPN 5 set pfs
  card crypto VPN 5 set peer B_WANIP
  VPN 5 value transform-set VPN crypto card
  card crypto VPN 5 defined security-association life seconds 28800
  card crypto VPN outside interface
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 5
  preshared authentication
  the Encryption
  md5 hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  tunnel-group 88.12.45.1 type ipsec-l2l
  IPSec-attributes tunnel-group 88.12.45.1
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !

  When you create a GRE tunnel between two routers, there should be a routing decision to reach the Remote LAN through local (rather than exit directly the physical interface) tunnel interface.

  This could be accomplished by EIGRP, but you can check if the adjacency is built.

  As a test, what happens if you add a static route saying (reach remote LAN, sending traffic to the tunnel interface).

  Check if the GRE tunnel comes up with sh interface tunnel

  Federico.

• SSL VPN without client

  Hi all

  I would like to know if, in confuring a SSL VPN mode without client, servers, I need to access must be directly connected to the VPN gateway?

  Thank you in advance.

  Servers can be anywhere in the network, but routing should be in place to reach VPN gateway.

  Thank you

  Ajay

• SSL VPN without client customization

  Hi all

  I'm learning to clientless SSL on ASA 5520 VPN customization, but I can't seem to add a few.

  y at - it a command or a sine qua non before customization? It could be question of java or asdm?

  ciscoasa # sh ve

  Cisco Adaptive Security Appliance Software Version 8.4 (2)

  Device Version 7.0 Manager (1)

  

  "AnyConnect Premium peers: 2 perpetual" is the key bit there. Those are the two included AnyConnect Premium counterparts with the ASAs.

  The VPN peers 'Other' and 'Total' to take into account the fact that you have also up to 10 IPsec VPN (remote access) or site to site over the two remote access client VPN active one any time.

  In general a remote VPN access can be:

  a. clientless SSL (only a browser required by the counterpart, but requires confusedly, AnyConnect Premium license on the SAA),.

  b. full-tunnel SSL (launch browser or directly from the Anyconnect client, requires either AnyConnect Premium or Essentials on the SAA), or

  c. based on IPsec (using the Cisco's IPsec client inherited with IKEv1 (no AnyConnect license required) or 3.0 AnyConnect client or later (with Essentials or Premium license on the SAA) with IKEv2).

  And there will be a test on this.

• Get the VPN without dedicated key server

  Hi all

  We plan to implement Get VPN in our collection company and place the pieces necessary to complete setting up VPN access. And I have a question about the present.

  Do we really need a dedicated server key? I mean I know that the key server cannot be a member of the group, but here's my question. I have a router that is configured for some voice features. And I do not want to be a member of my VPN infrastructure get (but it will be on the network and available to offices and remote sites). If this router can be configured as a server key and still perform other services such as speech or other things? I really need to know if this can work.

  I'd appreciate a quick and accurate answer that this forum is my last resort. Thanks in advance.

  -Jay

  Hi Jay

  You must be a key server, as is the router that will push the political security to members of the group. But it cannot be part of IPSec connections that is, not a member of the group.

  You can run other services and features on this router. But it should not affect the ISAKMP and GDOI traffic among the members of the group.

  Regarding

  Kings

• VPN without split tunnel

  Hello everyone

  I have setup a VPN connection, which I can connect to. For all customers of connection, I want to give them an IP (from a subnet maybe) and let them use this IP address for all that they do.
  Therefore, this:

  and not current:

  My inside is 192.168.1.0
  My VPN IP pool is 192.168.30.5 - 200
  My server (DNS, files, Web site) is 192.168.1.222

  Here's my setup. I scored what I thought might have something to do with it:

  ASA Version 9.2 (1)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  volatile xlate deny tcp any4 any4
  volatile xlate deny tcp any4 any6
  volatile xlate deny tcp any6 any4
  volatile xlate deny tcp any6 any6
  volatile xlate deny udp any4 any4 eq field
  volatile xlate deny udp any4 any6 eq field
  volatile xlate deny udp any6 any4 eq field
  volatile xlate deny udp any6 any6 eq field
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  pool of IP local IP-pool 192.168.30.5 - 192.168.30.200 mask 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.253 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  boot system Disk0: / asa921 - k8.bin
  passive FTP mode
  permit same-security-traffic intra-interface
  network obj_any object
  subnet 0.0.0.0 0.0.0.0
  network of the object Server-25
  Home 192.168.1.222
  Description of the test server
  network of the object server-80
  Home 192.168.1.222
  Description of the test server
  network of the object server-443
  Home 192.168.1.222
  Description of the test server
  network of the object server-2525
  Home 192.168.1.222
  Description of the test server
  network of the object server-993
  Home 192.168.1.222
  Description of the test server
  network of the object server-6001
  Home 192.168.1.222
  Description of the test server
  network of the object server-6002
  Home 192.168.1.222
  Description of the test server
  network of the object server-6003
  Home 192.168.1.222
  Description of the test server
  network of the object server-6004
  Home 192.168.1.222
  Description of the test server
  network of the VPN HOST object
  192.168.30.0 subnet 255.255.255.0
  the object to the Interior-net network
  host 192.168.1.0
  the VPN server object network
  Home 192.168.1.222
  outside_access_in list extended access permit tcp any object Server-25 eq smtp
  outside_access_in list extended access permit tcp any object server-2525 2525 eq
  outside_access_in list extended access permit tcp any object server-80 eq www
  outside_access_in list extended access permit tcp any object server-443 https eq
  outside_access_in list extended access permit tcp any object server-993 993 eq
  outside_access_in list extended access permit tcp any object server-6001 eq 6001
  outside_access_in list extended access permit tcp any object server-6002 6002 eq
  outside_access_in list extended access permit tcp any object server-6003 eq 6003
  outside_access_in list extended access permit tcp any object server-6004 eq 6004
  outside_access_in to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.30.0 255.255.255.0
  permit access-list Split-Tunnel-ACL standard 192.168.30.0 255.255.255.0
  no pager
  Enable logging
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 721.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (indoor, outdoor) Interior-net Interior-NET static source static destination HOST-VPN-VPN-HOST
  NAT VPN VPN-server destination (indoor, outdoor) static static source HOST-VPN-VPN-HOST
  !
  network obj_any object
  NAT dynamic interface (indoor, outdoor)
  network of the object Server-25
  NAT (inside, outside) interface static tcp smtp smtp service
  network of the object server-80
  NAT (inside, outside) interface static tcp www www service
  network of the object server-443
  NAT (inside, outside) interface static tcp https https service
  network of the object server-2525
  NAT (inside, outside) interface static 2525 2525 tcp service
  network of the object server-993
  NAT (inside, outside) interface static tcp 993 993 service
  network of the object server-6001
  NAT (inside, outside) interface static tcp 6001 6001 service
  network of the object server-6002
  NAT (inside, outside) interface static tcp 6002 6002 service
  network of the object server-6003
  NAT (inside, outside) interface static 6003 6003 tcp service
  network of the object server-6004
  NAT (inside, outside) interface static service tcp 6004 6004
  Access-group outside_access_in in interface outside
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  RADIUS AAA server HSS-auth-server protocol
  allow only
  AAA-server HSS-auth-server (inside) host 192.168.1.222
  Timeout 5
  key *.
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec pmtu aging infinite - the security association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  trustpool crypto ca policy
  Crypto isakmp nat-traversal 30
  Crypto ikev1 allow outside
  IKEv1 crypto policy 10
  authentication crack
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 20
  authentication rsa - sig
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 30
  preshared authentication
  aes-256 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 40
  authentication crack
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 50
  authentication rsa - sig
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 60
  preshared authentication
  aes-192 encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 70
  authentication crack
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 80
  authentication rsa - sig
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 90
  preshared authentication
  aes encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 100
  authentication crack
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 110
  authentication rsa - sig
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 120
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 130
  authentication crack
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 140
  authentication rsa - sig
  the Encryption
  sha hash
  Group 2
  life 86400
  IKEv1 crypto policy 150
  preshared authentication
  the Encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH stricthostkeycheck
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0

  interface ID client DHCP-client to the outside
  dhcpd outside auto_config
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  internal HSSvpn group strategy
  attributes of Group Policy HSSvpn
  value of server WINS 192.168.1.222
  value of server DNS 192.168.1.222
  Ikev1 VPN-tunnel-Protocol
  Split-tunnel-policy tunnelall
  Split-tunnel-network-list value Split-Tunnel-ACL
  HSS.dk value by default-field
  activate dns split-tunnel-all
  type tunnel-group HSSvpn remote access
  attributes global-tunnel-group HSSvpn
  address IP-pool pool
  HSS-auth-server authentication-server-group
  Group Policy - by default-HSSvpn
  password-management
  IPSec-attributes tunnel-group HSSvpn
  IKEv1 pre-shared-key *.
  tunnel-group HSSvpn ppp-attributes
  No chap authentication
  no authentication ms-chap-v1
  ms-chap-v2 authentication
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:c85ff8bf61669bef56b4dad704a4930a
  : end

  Hello

  Change Split Tunnel VPN in full Tunnel VPN, you have really do much in your configuration.

  Seems that have already changed you the 'tunnelspecified' 'tunnelall' in configurations of the 'group policy' . You can delete the setup but that defines the ACL of Split Tunnel

  attributes of Group Policy HSSvpn
  No split-tunnel-network-list value Split-Tunnel-ACL

  Seems that you use an internal AAA server to manage authentication rather than on the SAA. I guess if you want to assign a specific IP address for VPN user/username, then it must be done on the side Server?

  If you had the "username" on the SAA configurations you can set it up under its framework which "username" IP address gets when he or she connects with the VPN Client.

  As naturally as you start using the complete Tunnel and all traffic from the VPN Client starts to get in the tunnel to the ASA you will need a NAT for VPN Client users Internet traffic. You can configure this NAT like this for example:

  network of the VPN-POOL object
  192.168.30.0 subnet 255.255.255.0

  interface of VPN-POOL dynamic NAT (outside, outside) after auto source

  Note that this is a manual of NAT / double NAT statement real "nat" IS NOT inserted under the 'object' , but the 'object' is rather created it can be used in the "nat" command. I see that your other dynamic PAT configurations are configured with NAT Auto / object NAT network. You can do this like that too if you wish. Personally I do like that.

  But as I said before, it seems that you have already configured the VPN to be full of Tunnel. It is perhaps not as it is? While it is connected with VPN, you should be able to check the secure routes (or something like that) section to see if it says "0.0.0.0" If Yes, then it should be tunneling all traffic.

  Hope this helps :)

  -Jouni

• ASA 5520 customize logo in vpn without customer portal

  Hello world:

  I, m set up the clientless vpn functionality in my asa 5520 version 8.2. Now I m trying to customize the clientless vpn portal. I want to change the logo of Cisco in the portal of a corporate logo but I find the option of the Don t. In addition, I want to change the language of the Help menu.

  Can someone help me?

  Thank you.

  Concerning

  Hello

  Please see the bulletin:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a008094abcb.shtml#logo

  Thank you!

  -Jason