Tap a test of picturescrollfield

Similar Questions

• QWERTY keyboard does not not on the Meadow

  I just got a new Palm Pre yesterday.  I got about 2 hours and the QWERTY keyboard has stopped working.  Does anyone have an idea what could be wrong.  I turned it off an on and made a 'phone Erase', but it did not work.  I'm very happy to play with my new phone, but now I'm dead in the water. Any help would be greatly appreciated!

  I'm if Bell and they will not exchange the phone!  I'm stuck with it.  They don't help me at all.

  I have a second phone, I intend to upgrade.  I seriously think to go with another brand of phone.

  What kind of deletion do you have? The total or partial clear operation?

  You can try the switch/ring switch reset to see if it can fix the problem.

  Press and hold the power switch, move the switch-ring 3 times and it will reset the PRE. See if this reset can solve the problem.

  You should try the interactive button on the PRE test to check the functionality of the keyboard.

  The application of interactive Tests takes you through a simple Diagnostics to test the hardware components of your phone.

  1. Open the Launcher and press Device Info.
  2. Press the more infobutton.
  3. Open the application menu and tap interactive Tests.
  4. Select the test you want to run.

  You can test the following components:

  • Physical buttons: testing the keyboard and the keys on the phone

  Take this test to see if the keyboard does not work.

• RMAN error: ora-12705 while testing on the tape with EMC networker backup 7.63

  We failed with our script, rman with the following error. Version of the OS is redhat linux 5. DB version is 11.2.0.3
  
  Recovery Manager: release 11.2.0.3.0 - Production on Wed Sep 22:50:48 5 2012
  Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
  
  RMAN > Connect target *;
  2 > #rman target / < < EOF
  3 > #rman target;
  4 > run {}
  5 > configure the parallelism of peripheral band type 4;
  6 > ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE ';
  7 > allocate Ribbon type channel ch2.
  8 > allocate Ribbon type channel ch3;
  9 > assign the channel type Ribbon ch4;
  10 > allocate Ribbon type channel ch5.
  11 > configure controlfile autobackup on;
  12 > configure the type of backup device type Ribbon backupset compressed;
  13 > INCREMENTAL LEVEL 0 BACKUP copy the TAG "fullcopy_prd" DATABASE
  14 > CHANNEL ch1.
  15 > CHANNEL ch2.
  16 > CHANNEL ch3;
  17 > CHANNEL ch4;
  18 > CHANNEL ch5.
  {19 >}
  20 > {EXECUTION
  21 > ALLOCATE CHANNEL ch1 TYPE 'SBT_TAPE ';
  22 > SAVE that copy ALL ARCHIVELOG;
  23 > SAVE that copy CURRENT CONTROLFILE;
  24 > CHANNEL ch1.
  25 > crosscheck backup;
  26 > delete NOPROMPT obsolete FORCE.
  {27 >}
  28 > "exit";
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  ORA-12705: cannot access files of NLS data or invalid environment specified
  
  Complete recovery manager.
  
  The seller of bands is EMC networker 763. There are other other aix hosts running prod db supported by the same provider, we tried their script on the linux host, we got an exact same error.
  
  I wonder if I should setup NLS enviornment. but the emc network operates by setting variables in a config file in / etc /. He did information non-specific nls.
  
  Does he know this seller and this problem, please help me solve the problem.
  
  Thank you in advance.

  982335 wrote:
  RMAN-06583: at least 1 channel of TYPE DISK must be distributed to use the COPY AS option

  Since I was on backup as copy. So backup copy won't work on the Strip?

  Hello

  No, you can't backup as copy directly to tape.

  Don't know if it works but try this

  1. first copy the disk backup
  2. then backup datafilecopy all tape

  See you soon

• Tap to hear the time function does not work

  I can't tap to hear when mickey or Minnie faces to work

  I have the latest versions of software on the phone and watch I toggled the function works and have re-matched my watch to my phone, but it still does not.

  Hello

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere between 3 and 5 hours, but you can see he started working earlier than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• Tap to talk time does not work on my watch

  Hey guys!

  Tap to talk time does not work on my watch.

  I know that his works only with Mickey/minnie.

  the watch is after unpari/pair, the "tap to speek" function is enabled (on the iphone and the watch)

  both are updated to the latest ios/watch OS and still...

  any ideas...?

  Thank you!

  Return on investment

  Hi King

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere 3-5 hours, but you can see that the function starts working sooner than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• How do you add the test results in the application of the health data?

  I had a medical test yesterday, and I want to keep a record of the results.

  I want also to a record running of my blood pressure, pulse and hemoglobin, I take each week.

  Hello

  To add data manually, open the application health and go to: data on health (tab) > choose a category (or select all) > tap on a data type (for example, blood pressure) > add a data Point > add your data.

• Hard drive DST short test failed

  My HP Pavilion dv6-6c35dx laptop computer fails to load Windows. I ran diagnostics and got a quick access error (303). HP UEFI Diagnostics for hard drive failed the DST short test with failure code MBX47F 0006QU PXGK01 QT 60 03. Does this mean I need to replace my hard drive? Product ID of my laptop is A6Y53UAR #ABA and I have Win7-64 installed on it.

  Thank you

  Claudine

  Hello

  Your laptop is listed as coming with a HARD drive from 640 GB, but given that there is little difference in cost, you can replace this with a 750 GB option.

  The player at the link below is an example of one that would be perfect for your laptop.

  750 GB hard drive for laptop.

  The procedure to replace the hard drive begins on Page 64 of your maintenance & Service Guide.

  ***************************************************************

  Regarding the reinstallation of the operating system, you can create your own installer of Windows 7 USB drive flash as follows.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  Using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below--these Images are of a very respected source (Digital River).

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Once completed, use the Microsoft Tool on the following link to create a USB bootable Windows 7 installer - you will need a 4 GB flash for this drive.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the Windows 7 flash player.  Select the Boot Options menu (usually f9).  Use the arrow keys to select the flash drive and press ENTER.

  If your laptop will boot from it, use the flash player to perform the installation, enter the activation key for Windows on the label of the COA in the request and once the installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without the software load extra normally delivered with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• Satellite M40x won't start after upgrade CPU test

  I have a portable M40x I took the CPU out of it to replace it with another to test the computer started fine then I stopped and took out and put it's original return CPU, and it wouldn't start. Now it primer with any one of all the CPU. When I turn on the power, all I get is a white screen for a few seconds and the laptop is closed down. Both the CPU is good because I since tested on other computers to make sure that this was not the problem.

  Anyone has any ideas on what is the cause?

  I m not surprised.
  As far as I know, Toshiba does not support updates, and it is not advisable to do something like that.
  It of one that the replacement of CPU on laptops is not easy and not recommended.
  The processors used in laptops are connected to the motherboard using a process called TCP (tape carrier package). It is a method of permanent connection and is used in the interest of miniaturization and heat dissipation.

  He was awarded the new heat paste? It s necessary and important if you want to connect again the CPU.

  It is perhaps a reason for not starting.
  I think more details you will get from the service guy in your country

• Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

  Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

  Hello

  Try the following.

  First, download the Memtest Image file (.) (ISO) on the following link.

  http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

  It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

  Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

  At least 3-4 passes and see if errors are found.

  Kind regards

  DP - K

• VAIO Tap 20 lost wifi after sleep

  My Vaio Tap 20, after waking up from his sleep, he loses his wifi. Does anyone else have a 20 Tap having problems?

  Ryan,

  Thanks for the reply. However, I tried the instructions and tested it and I still lose my wifi whenever I wake my computer from sleep mode. Any other suggestions?

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• HP Pavilion DV6 3070TX - Microphone works on tape but not Skype

  Hi team,

  I did a bit of trawling through previous posts but have not found an answer that fits my scenario. This is a brand new laptop (HP dv6-3070TX) and the internal microphone works great on tape, however I can not be heard by others on Skype and the test recording easier on Skype is not read my voice. I hope it's a simple question, repairable and someone has an answer for me.

  See you soon.

  Sorry team. I'm a twit. There was an audio setting on Skype, which has been set at an external microphone - not internal. Changed and all is good.

• Start Up test failed

  I did a test boot and it failed.

  Failure ID is U0E164-6GH720-MFGKOK - 60T 703
  Product ID is C2N25UA #ABA

  PLEASE HELP ME! What should I do?

  Hello

  Very probably, code is related to a failure hard disk - you can check as follows.

  Stop of the laptop.

  Now on TAP the ESC key as soon as you press the power button to launch the Start Menu.

  Select the working Menu ( f2 ) and perform the specific tests on the hard drive.

  Is this product the same code error 24 characters?

  Kind regards

  DP - K

• Configurable custom test types

  Hello

  I'm doing a type of custom step that works like the limit works in test limit digital ex.. What I want, is a new component called "Test" with 1 field shall be amended by the insertion of a variable or just an exodus of value 2 as you can do within the limits of Tap, I did a step where you can change this by clicking on a button that opens a LabVIEW vi and from there you can change I'm looking for is to make sure you can change it without having to open LabVIEW test bench as well so that you can insert a variable...

  Attached is a picture showing what I want...

  Marck H Hansen

  Marck Hello,

  At the moment there is no official support for this feature.

  I recommend to visit this idea http://forums.ni.com/t5/NI-TestStand-Idea-Exchange/Ability-to-create-user-built-in-StepTypes/idi-p/1...

  and fire a kudo to her...

  Concerning

  Jürgen

• Configuration of the areas of tap on HP pavilion dv6t 3000?

  Is someone can you please tell me how I can set up Zones of tap? The clickpad of my Pavilion dv6t-3000 is not good, the buttons are very difficult. Impossible to get an improvement since the parameters of the BIOS, or worse, even the HP service center... I am trying to configure tapping under mouse properties settings, but not able to see the option 'Areas of tap' as stated in the website ( http://support.hp.com/us-en/document/c00678194 )

  The Synaptics ClickPad V7.4 installed version is 15.1.6.64 (29/09/2010).

  Can someone help me please...

  Thank you

  PIX

  Hi David, thanks for posting this... I haven't actually tried the method above, so do not know if it works or not. Before I even gave your method a test, I tried something else and it worked!

  I followed the steps mentioned in this link: http://anterence.blogspot.com/2010/07/enabling-tap-zones-in-synaptics.html?showComment=1300242485556#c6757567949241367366

  It worked! Finally, I was able to set up the area of tap for my laptop.

  Someone else also suggested another way to achieve the same result: http://scottanderson.us/index.php?m=02&y=11&entry=entry110213-163030

  Just a quick note for those who would use the touchpad and the clickpad not... This will not activate if the click of a button is activated. Then uncheck buttons activate or activate the option clickpad and you should be able to use the touchpad click

  Thanks again David, really appreciate that you take the time to reply to this post!