Start Up test failed

Similar Questions

• Starting test failed

  I have a HP Pavilion g4-1125DX with Windows 7. A few days ago while I was downloading the files that it hung. I was able to move the cursor, but could not close the browser window, nor could I stop him. I push the power button down for a few seconds for a hard stop, when I tried to connect the system to the top it wouldn't boot Windows. He gave me several options to save and I tried to perform a restore of Windows, which did not work, tried to start it in safe mode and still have the same error, I gave up trying to save my files that I have most of them supported anyway if I tried to perform a full recovery of the system to the factory settings. He went through the process of recovery worldwide and says that it is successful. When I tried to reboot after recovery, he hung up on the trunk again. He didn't try to make me the same recovery menu. He just hung. I tried another hard stop and restart to get to the HP Advanced System Diagnostics and tried the start-up Test and he FAILED.

  He gave me the FAILURE ID: M4H27W-5NR5SC-MFPV5G-60UQ03.  I don't know what to do with this information. I need help. I just want to get this thing back operational.

  Thank you.

  Hi, LBG,.

  An error 303 is a failure of the short drive self-test and definetely suggested that tough is a failure.

  As your laptop is still under warranty, contact HP by simply using the relevant link below and make arrangements for the disk needs to be replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Failed to start the test

  I have a hp pavilion g7, Windows 7
  
  Starting tonight, my laptop fails to start and freezes on the "getting started" page view. After several of the recommended options, I ran the test that does not start.
  
  The display screen reads-
  Memory test: past
  Smart check: past
  Dst short: failure
  
  Failure ID: GU6E00 - 63479 L-MFPX01-60TP03
  Product ID: A7A44UANBA
  
  Hard drive 1
  
  Starting test: failed
  
  Where should I go here for this problem?

  Hello

  Error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.  It is also compatible with startup problems you describe.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and you want a guide on replacing the hard drive you, please let me know...

  Kind regards

  DP - K

• Starting test FAILED - HP ENVY 1191-NR

  Hey guys/girls,

  New to the forum - need some tech support.  I have a HP ENVY3D 1191-NR running Windows 7.  He recently began closing before you start completely.  I ran a Test at startup and for the following results:

  Memory test: FAILED

  FAILURE ID: QE40XL-5GE6G4-XD0141-400103

  PRODUCT ID: YL748UA #ABA

  Memory module

  Starting test: FAILED

  I wonder if that means the RAM of the computer has gone wrong and I need to replace, or else... ?

  Thanks in advance to all.

  Hello:

  Yes, that could indicate a possible memory module failure.

  What I would do is unplug the PC and remove the battery.

  If the laptop has two memory modules, remove one of them and plug the power adapter.

  See if the PC starts and works normally.

  If so, unplug the adapter, remove the other memory module, put in the first one you took, connect the a/c adapter and see what's the result.

  If the PC does not start, you have isolated the bad chip and you can just buy a new one with the same characteristics.

  If the PC is still under warranty, contact HP for a replacement.

• My HP dv6t starting test failed. I can't start windows 7 USB/dvd-drive

  Internet did not work and other things on hp dv6t laptop my son with windows 7 I did a system of resettlement.  It worked for a day and now can get right after loading windows files and then a blue screen with the rays of the Sun.  I can't do anything.  I tried to do a start-up test and it said that the memory test and a smart test passed but the shore that DST has failed.  What does that mean?

  DST-short is the hard drive, he has failed the test, replace the hard drive.

• Start DST short Test failed, cannot start - data recovery

  Hello!

  A week ago, I posted the message that - at the start - I get a blue screen and the diagnostic utility says that start DST short Test failed...

  I was told that the bad far developed - unfortunately in these square where some files needed to start...

  There is, however, always a guarantee

  I installed the HARD drive in an external enclosure, so I already transferred my files, screensavers & fonts and so on on another HARD drive - well. But one thing that is still missing EMAILS. E-mail messages that are in Outlook Express as well as the different accounts that I use (Finally, I still not know the settings, but I would simply import the account to my new installation)...

  Is THERE ANY CHANCE to get these EMAILS (at least and go as far as accounts) WITHOUT booting the system with this very HARD (which currently doesn't)... where these mails are stored? or should I try to get windows working again to access Outlook & emails?

  
  

• the start-up dv7-7259nr test failed

  My dv7-7259nr startup test failed.

  Here are the results of the tests:

  Verification of the processor: past

  memory test: past

  drive hard smart check: past

  hard drive short DST: failure

  Failure ID: GU2AKQ - 6N26P4-QFPJW1-60XM03

  Product ID: C6N75UA #ABA

  Hard drive 1

  For more information, go here.

  I can't find it.

  Help.

  Thank you!

  Hello

  The short drive Self Test (DST) failure error code would indicate that hard is defective and must be replaced.

  If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Boot HP test failed

  Hello

  Just a quick note before we begin, I'm not that tech computer of mind, so please bear with me.

  Its a Hp Pavilion g series, running windows 7 (think 64 - bit).

  Have portable receoverd after he high reading / suspension / does not not (or all of the above), but now it always crashes running the HP start-up test. He says that he didn't and he gave me the following.

  memory test - passed

  intelligent control - spent

  DST short - failed

  failure - OU7D7K-5QW744-MFPV4K-60QU03 ID

  product ID - A7D65EA #ABU

  tough - 1 disc

  I know that something is wrong, but can someone please help and tell me what's wrong?

  Thanks in advance

  Rob

  The hard drive failed the test and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  If you need help for selection/replacement of the hdd post back with the complete model & product number as indicated on the Service tag on the bottom of the laptop.

  How can I find my model number or product number

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards

• Pavilion 2206TX: hard drive DST short test failed

  Hard drive DST short test failed.

  For a few days, my laptop is not starting.

  Run the diagnostics showed "hard drive DST short test failed.

  I removed the hard drive [brand Toshiba] and connected as an external drive to a Mac.

  I am able to access your hard drive and copy some content from it. So, it looks like a problem with the hard drive.

  Is this a problem with the connection of harrdisk to the motherboard or with the hard drive itself?

  Help, please.

  Hello
  
  Yes, you can use your friend recovery media in your. It should work.
  
  I'm not able to find a recovery media for your model of third-party vendors too.
  
  No, you can't create USB recovery by plugging the old drive as external references to another PC. You have to use HP application recovery manager supplied with your laptop and create a set. I think that you will not be able to do from a failing drive.
  
  Concerning
  
  Visruth

• Memory test failed w / Kingston 4 GB

  I have a HP G42 - 461LA Notebook PC, and I added a 4 GB Kingston Ram memory (KVR1333D3S9 / 4g). I started to notice my laptop has been slow and has decided to conduct a Test of memory of the HP Diagnostic tools (F2).

  It fails with this failure ID: U3439W-5HW70M-XD002K-40HU03

  When I removed the memory stick and tried again he passed successfully.

  The strange thing is that when it is installed it is recognized and it seems like it should work, but it is slow at the opening in a few tabs in the browser (most audio glitches), and the test fails.

  Hello

  ID failure indicates that there is a problem with a memory, and must be replaced. This should be the cause of the issue of the slow-running also.

  

  I suppose that there are two locations of memory for your computer.

  You can try a memory at once and run the test or check the performance of the computer with a memory. Then, you will be able to isolate the faulty memory.

  Sometimes it might be also the memory slot... so try a memory at a time in each slot in interchanging the. That will help you know if there is a problem with one of the slot.

  You can refer to this link...

  The upgrade (RAM RAM)

  I hope this helps...

• Compaq presario v6000 v6409tu disk hard bios self-test fail

  Hello

  Windows xp no my pc compaq v6000 not starting and bluescreen showed a couple of times. I ran the BIOS (phoenix) disk hard diagnosis and the test failed. When I opened my HDD I noticed green rust as deposits into the connector on the hard drive. After cleaning with a brush, computer loaded XP successfully. But an hour later, while I was surfing in mozilla suddenly the mouse pointer started late and showed computer blue screen saying that windows has been closed down to prevent damage.

  I would be grateful if someone can tell me if it's a software problem or hard drive error. If I need to replace my hard drive, what are my options, for example. rpm, capacity, provider? Thank you.

  The only way you could have rusted copper into the connector on the hard drive is if liquid got in there so I am reluctant to try to speculate how much damage has been done. I remove the hard drive and connect it to the outside to another computer and run chkdsk on it to see if the drive itself is bad. As long as there is a problem on the part of connector and the interface with the motherboard cannot really trust the onboard hard drive Diagnostics. You could also get an own another new hard drive adapter.

  http://www.eBay.com/ITM/new-Compaq-Presario-C700-F500-F700-V6000-SATA-laptop-hard-drive-connector-/161297513053?PT=US_Drive_Bay_Caddies & Hash = item258e14ba5d

  If it does not turn on the hard drive is bad, you can replace it with any laptop SATA drive no more than 9.5 mm thick.

  http://www.Newegg.com/product/product.aspx?item=N82E16822145587

  Above is a good thing. It is slim (7mm) but it will still go into the caddy and connect to the motherboard with the connecting piece. If the hard drive itself is always good, and you replace the connector piece but he always bluescreens, so I would not spend money on a new hard drive. I would say that there was damage to the motherboard.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Hard drive test failed in the HP pavilion dm4 1041tx and HDD 0303 fast 1

  starting problem in my laptop,

  showing hard disk test failed...

  Error Msg: "fast hard disk 1"(0303) "

  Hello

  303 error seems to indicate that the drive is defective and must be replaced - it is also compatible with your startup problem.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

  Kind regards

  DP - K

• Operating system not found on Equium - PXE - E61:Media test failed

  Hi all

  My daughter has a computer satellite laptop running XP.
  However, the system does not start and the following messages:

  PXE - test failed - check the cable for E61:Media
  PXE - M0F: output of the PXE Rom
  Operating system not found

  We do not have a disk operating system.

  What is the problem and how can I do for her?

  Hello

  For me, it seems that the HARD drive is dead and the laptop can not find the installed operating system.
  In this case, he tried to boot from different sources and finally LAN.
  But it does not and therefore, you get the PXE - E61:Media test failure error message.

  In my opinion, the HARD disk needs to be replaced and the operating system must be installed again.

  See you soon

• Has no start-up Test

  Hello my computer was blacking out before commissioning. I run a Start Up Test and received the message
  DST short: failure
  ID 0TQKP1-54D67N-XD003G-60VB03 FAILURE
  PRODUCT ID WQ637UA #ABA
  
  I am owner of a Pavilion dv7 - 4087cl laptop with Windows 7 64 bit. I had very similar problems to the person in the following post: http://h30434.www3.hp.com/t5/Notebook-Recovery/Failed-Start-Up-Test/td-p/1058575. After following the instructions in this post, I ran a test on my hard drive in the BIOS and the full hard drive obtained at 24% test and gave me the message "hard drive 1 full [305]" I'm not sure what it means, and I know that my hard drive is full far. Help, please.

  The full hard drive 1 error means that the drive failed.

  It's time to replace the drive with a new one. Use the set of recovery disks or USB recovery media that you created to return the laptop to the State wherever it was when it was delivered to you.

  Is your laptop still under warranty? Check the status of the guarantee.

  In case of warranty, the hard drive is replaceable under warranty. It is a replaceable component of customer and is an easy thing to do. It can also be replaced in a HP Service Center.

  If it is in warranty, so the specific type, you need to buy is a mobile (laptop) Serial ATA (SATA) 9.5.

  mm/12,5 mm, 6.35 cm (2, 50 - in) hard drive of up to 2 TB of storage capacity. SSDS are also viable replacements.