Target SNMP not registering not

Similar Questions

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• PS4000 group, "target did not in time to a request from task management."

  Hey everybody,

  A year ago I could re - purpose a PS4000 SAN and an old proliant server to make a small network of Hyper-V.  He was always a great and me has not given any problems.  Recently I acquired a second PS4000 server and proliant... so I added the second for the group from SAN SAN in intend to do a second volume in the group for my second server to use.

  The problem I have is that my second server can apparently connected to the second volume via iScsi, but once it is connected I can not format the disk or anything like that.  Attempt to initialize and format the drive will just forever, disk management apparently freezing.  There is an error in the event viewer saying "Target has not responded to time to a task management application".  In addition the same group SAN newspaper shows the event 'iSCSI target session has been closed. iSCSI connection intra-group failed. Reset was received on the connection.

  If someone could give me an overview on this it would be greatly appreciated... I'm quite new in the world of SAN.  The only difference between the two servers is be Server 2012 and the other is 2012 R2.

  I thought about it... I just wanted to post my answer here, just in case someone else has the same problem.

  While it was important to update the firmware on the SAN, which solved the problem was actually the upgrade the firmware of the NETWORK card in my server.  In my case, there was a utility to upgrade the firmware for my HP NC382T NIC in my Proliant DL380 G7 server on HP support site.  When you use the utility, I found that the iScsi firmware was very outdated and has been invited to be updated.  After the upgrade of the firmware and drivers for good measure, the iScsi connection worked perfectly.

  Thank you all for your comments!

• Copy-paste/Clipboard bug in Windows 7 if the target is not open before the copy operation

  Copy-paste/Clipboard bug in Windows 7 if the target is not open before the copy operation

   

  Behavior of copy - paste doesn't seem to work properly in Win7.

  I just migrated to a new machine of Windows 7 with new Office 2010 installed where I performed tests on the problem.

  If I copy the text to the Clipboard from an application open MS (for example Excel, but also other programs MS like windows Explorer, internet Explorer, etc.), and then open a fresh word (one instance open) document and paste the text, it appears as an oval-shaped blob image.

  Similarly the same problem when I subsequently open apps package and try to make a hem

  The problem does not arise

  1. If the fresh Word document is already open before doing the copy operation

  2. If another document is already open before doing the copy operation

  3. If the copy on an Excel cell (for example) make it, stick first to Excel, and then open a fresh Word document (single instance) and paste to that

  It is not just Word. Other target applications get the unwanted copy if they are open between the copy and paste.

  This bug is not present in XP.

  Thank you very much.

  OK, it's more clear now. It is Office 2010 which trashes the Clipboard when the first instance of a program Office 2010 is open (well, I tried only Excel and Word).

  Scenario 1: Open Excel, write a few essays in a cell, copier, copy to the Clipboard, open the new Word document, paste that and the oval blob error occurs

  Scenario 2: Open Word, write a few characters test, copier, copy to the Clipboard, open new worksheet Excel, paste that and the oval blob error occurs

  Scenario 3: Open Word, write a few test characters, copy to the Clipboard, close the word document, open it again, dough one and the oval blob error occurs

  Scenario 4: Open Word, write a few characters test, copy to the Clipboard, open another document, paste and no error occurs

  Scenario 5: With Excel and Word open, first cut an and stick to the others - works fine

  Conclusion: the windows clipboard is always corrupted when the first instance of an Office application is opened.

  Kind regards

  Andrew

• EPMFDM-140301: cannot retrieve members. The target is not available or you do not have permissions to access the target application

  Dear friends,

  I have this error when clicking on the value target in the loading map.

  EPMFDM-140301: cannot retrieve members. The target is not available or you do not have permissions to access the target application.

  But my HFM application is running and I can show members in the application of HFM. Through the mapping of FDM, I'm not able to view the list of members in target value.

  Please give me the perfect solution for this.

  Thanks in advance

  Concerning

  Satheesh.S

  Thanks for your quick response

  Again added my application target, include membership lists.

  Concerning

  SS

• When not equal then delete target does not. Please suggest.

  When not equal then delete target does not. Please suggest.

  MERGE INTO pppp pp

  With the HELP of pppp1 p1

  WE (pp.productnr = p1.productnr)

  WHEN NOT MATCHED

  THEN

  DELETE

  Hello

  2751928 wrote:

  When not equal then delete target does not. Please suggest.

  Think about it logically, is that correct?

  You say: DELETE something that does not exist. The NOT MATCHED block will be executed only when the data being sought are not found.

  AS FAR AS I KNOW:

  For NON MATCHED block, INSERT only is allowed.

  For block MATCHED, UPDATE, and DELETE are allowed.

  Take a look at this point - ORACLE-BASE - improvements in Oracle Database 10 g MERGE statement

  Please explain, in other words English, what you are trying to reach.

• Why oracle.exe takes 8 Virtual G; bytes, memroy target may not go beyond 5 G. How to minimize the virtual bytes perfmon

  Dear Experts,

  Please help me check why virtual bytes Perfmon takes more memory we allocated.

  OPERATING SYSTEM

  Windows Server 2003 R2 Enterprise Edition x 64 Edition Service Pack 2 (build) 3790

  ORACLE

  Oracle Database 11 g Enterprise Edition Release 11.1.0.6.0 - 64 bit Production

  PL/SQL release 11.1.0.6.0 - Production

  CORE 11.1.0.6.0 Production

  AMT for 64-bit Windows: Version 11.1.0.6.0 - Production

  NLSRTL Version 11.1.0.6.0 - Production

  Total RAM on the box is 8G

  Swap file

  Windows virtual memory equal to C, D, E, F discs is set to M 12273 and allocated now is 11262M

  LPENABLED is not defined

  SQL > show parameter pga_

  pga_aggregate_target 0

  SQL > show sga

  Total System Global Area 5344731136 bytes

  Bytes of size 2114736 fixed

  4630514512 variable size bytes

  671088640 of database buffers bytes

  Redo buffers 41013248 bytes

  SQL > see the memory settings

  hi_shared_memory_address 0

  memory_max_target 5G

  5G memory_target

  shared_memory_address 0

  SQL > show sga parameter

  lock_sga FALSE

  PRE_PAGE_SGA FALSE

  SGA_MAX_SIZE 5G

  SGA_TARGET 0

  Question:

  Why oracle.exe takes 8 Virtual G; bytes, memroy target may not go beyond 5 G. How to minimize the virtual bytes perfmon

  Thank you for your time and help.

  When you talk about Oracle.exe you seem not to take into account

  -L'executable memory will too

  -Oracle is a multithreaded Windows process, so memory consumption goes also to the different client that are connected to the database session.

  This means, you consume approximately 3G of memory beyond the LMS, and it is quite reasonable.

  So if you want to make sure that oracle consumes less than 8G memory, you have two options

  -reduce the SGA

  You spend more than 50 percent of the memory of the SGA. Oracle has never recommended that

  You might be willing to v$ sga_target_advisor allows you to see the impact of this change.

  You may also set your SQL queries

  -the second option you have is to stop Oracle.

  For sure it will use less than 8G in this solution.

  ---------------

  Sybrand Bakker

  Senior Oracle DBA

• Load order of target does not work properly in 11.2.0.2

  Hello
  
  Mappings that are migrated from version 11.2 OWB10.2 that contains several targets do not work according to the load order of target given in the mapping.
  
  The order in which targets are responsible for changes between execution.
  
  To test is that a problem with the migration that we had created a smaple target containg 3 mapping and mentioned the order in each target table as well as the mapping of loading property.
  
  The order in which targets are loaded was random. But when we have 2 targets it seems to work. But for the migrated maps is also not working.
  
  Y at - it a bug reported in 11.2.0.2 for that matter? Any help is appreciated.
  
  Thank you and best regards,
  Pnreddy

  Make a right-click on your mapping--> configure--> Code generating options--> charge of target to use ordering her--> Set true

• Problem burning DVDs. "Error in device - device target is not suitable for use.

  Hi all

  Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.

  Just thought it was important to note the success, but also failure!

  However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.

  After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.

  I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.

  Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.

  That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.

  So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?

  I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.

  Justin.

  Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.

  Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.

• RT target does not read shared variable hosted by host

  Hello

  I just started to move my LabView application to a system of RT, and I came up with a problem. When I host a shared variable network-published on the RT target, I can access through vi running on the target and the host (which is good!). However, when I have this host on the host variable (such as by simply dragging on 'My Computer' in Explorer projects or all create a new variable), the vi running on the target RT is not read.

  I wonder if there is a problem with my installation of LabView, or if there is some step I'm missing. Any suggestions would be greatly appreciated!

  My host is running Windows 7 x 64, with LabView 2009 SP1 32 - bit. The objective of the RT is a real-time OS-powered desktop PC. I have attached a very simple project to illustrate this problem: I start 'Target VI' and 'Host VI' at the same time. On 'Host VI', I change the values of the two shared variables: 'hosted host' and 'target hosted. Only the changes made to the target "hosted" appear on the 'target VI'.

  Thank you!

  Andrew

  Take a look at this link (software configuration and firewall hardware to support National Instruments products) and this link (configuration of firewalls and routers network address translating shared Variables) to see if this highlights exactly what you need to explain in your application regarding the definition of the firewall exceptions.

  David has.

• How to have an entry in the list 'No. Target' parent not 'clickable '?

  I use DHTML tree as my list template and the list is added to the zero page in the Navigation area model. All entries in the child list are working properly and the parent entry list is set to "No Target". However, when I mouse over the parent entry list, the list of entries parent stills show that there is a clickable link, even if it does nothing if I click on it. It is misleading. If it is a 'feature', is anyway do disable it or bypass it?

  A better way to disable the link of the parent list item is to choose the "target Type" = "URL" and "The target URL =" #" When the user clicks on the parent list element, the browser would simply navigate to the top of the web page itself. In other words, he would just stay on the same web page, and there is not even a page refresh must be executed.

• Flash - drop target does not work in the container?

  Hello
  
  I am very new to global Flash but I hope this isn't a stupid question!
  
  I produced a Flash movieclip containing a fair a few layers, including layer masks, actionscript, etc.. One of the things that is allows the user to click and drag a number of movieclips and place them anywhere in the mc, but if they fall on specific targets and then some actionscript (AS2) kicks in, stops the drag object to be moved again and allows to browse its executives to basically 'expand' the drag object and beep to indicate to the user that they have struck the appropriate brand.
  
  It all works perfectly on its own or in a window of browser etc.
  
  The problem I have is when I try to insert the Flash movie in a package of e-learning in Adobe Captivate 4. Things work ok apart from when you drop the object slipped on a drop target, nothing happens. Does not run the actionscript code.
  
  Would the fact that the movieclip is (probably) sitting in a container (the Captivate e-Learning Pack) be the cause of the problem? If so, how can I solve this problem?

  ANY help would be greatly appreciated!

  Code as1, as2 is not.  and who has all sorts of problems when you load in a container movieclip.

  you really should learn as2.  but in as1, it would be:

  {if (Eval (GetProperty (This, _droptarget)) ._name eq 'Ref_in')

  It's a very uncomfortable syntax (as1 being clumsy) and you need to remove these slashes (/) of your code.

  in as2, this would be:

  {if (Eval (this._droptarget) ._name == "Ref_in")}

• Reconciliation of the EBS target does not work for the payments.

  Hi all

  I use OIM 11 g 2 and Oracle EBS user Managment 9.1.0.7.0 connector.
  I want to link the user's responsibilities in EBS your child to IOM. I tried to use the Scheduler ""eBusiness UM target user reconciliation resource ' but the execution of this work is just creating the EBS account for the user at the IOM. " I can see the user's responsibilities in the details information of the EBS account, which was created by the work of reconciliation of target, but I don't see them as the user rights

  How can I achieve this?

  Any help is appreciated.

  Thank you and best regards,

  Thank you for your help. I solved this problem with the use of assignments of rights enforcement after the work MU target resource user reconciliation eBusiness

• Processing instruction target may not be "XML".

  Hi all

  I'm getting a xml like this,

  http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">http://tempuri.org/">http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">http://schemas.xmlsoap.org/soap/encoding/" xmlns:ns1="urn:HotelSearchBookkEngine">http://schemas.xmlsoap.org/soap/encoding/" xmlns=""> .............
  

  This document have definitions xml twice, and I get this error

  Any solution for this...

  Thank you.

  Thanks for your reply simon,

  I just replaced the definitions with empty string and now it works fine.

  Thank you.

• HP Designjet T3500 printer: Printer - scanner calibration target T3500 is not accepted

  We need to calibrate the Analyzer (rolls and glasses are empty) our T3500 printer, but the calibration target is not accepted (calibration target is not valid), we tried in user (maintaining the image quality) and also in service (service utilities - validation scan) mode, but in both cases, the target of calibration is rejected. Same calibration target has been used for calibration of the T2300 scanner without problem.

  T3500 has the latest fw. installed.

  Please advice if you have experience with this problem, thank you.

  Hello

  Finally, the problem is solved by the black pencil..., there is a box of identification (such as a bar code) on the upper right corner of the calibration sheet, even if it has been used to sentence, but some places on this label were dead black and we have improved in pen and now the target is accepted and calibration is successfully completed.

  Thanks for your time and your suggestions.