HP Designjet T3500 printer: Printer - scanner calibration target T3500 is not accepted

Similar Questions

• Designjet T1100: Print multi-passages

  I want to print several layers of ink on top of the other to get the extra contrast on backlit material.  Is it possible to print, and then roll the paper to the starting position and print another job on top of one?  We have a Roland printer at work that has this capability, called "back home", which is just a check box in the print options.  Something similar for Designjet printers?

  Hello

  This option is not available to the general public.

  But you can try with the multiple presets of paper and print quality for saturation you want

• cartridge HP 61 (recharging)? Deskjet 1050 /HP, series J410, discharge printer/scanner

  I bought a hp deskjet 1050 (J410 series) printer/scanner, about 3-4 weeks ago, at Future Shop for $29.99. I used all of the ink in the black cartridge 61 hp, called a local outlet for a large company to fill cartridge and I was told that they could fill up again. They did it.
  
  Now the printer/scanner is displaying the attached message and refuses to print.

  

  What is the opposite of "green"? HP did not hear the words "reduce, reuse and recycle '?
  
  HP is really so short-sighted that they hired printers and cartridges design engineers so that the printer does not work after using the ink in the cartridge?
  
  A new hp deskjet 1050 printer/scanner costs $29.99 at Future Shop. A black hp 61 cartridge costs $19.99. They really matter to the printer go in a landfill after using ink? I used to think product hp product - quality since I bought my first calculator hp 21 more than 35 years ago.
  
  I tried to get rid of the warning (with the 'Close' button disabled) by starting the Task Manager and end the task. but the printer still does not print. Do you know another solution to workaround?

  At this point, I think again the printer & shopping for a better alternative.

  Thank you.

  I would say that if the message comes up again just to say 'no '.   While HP does not fill, they try to crack down on counterfeiting, which sells reloaded cartridges / reman as genuine HP.

  BTW, instead of charging probably taken your cartridge used once and you gave another replacement.  If you had gotten back your printer cartridge would have recognized and do not show this message.  I suggest that contact you the restring a replacement if cleaning the contacts of the cartridge as shown below (for a different series, but the same principle) does not solve the problem.

  On a related note, I gave once a printer at the local high school.  Some time later I received a call from the teacher that he was not working properly.  They had replaced the #57 with a charged cartridge that had the wrong color in yellow (green now).  We got a replacement and had one of the missing colors.  Finally, the third replacement worked.  I asked why they bought refills and the teacher said they were less expensive.  I asked if they have 1/3 of the price...  You get what you pay for.

  BTW, I do not work for HP or represent them, I'm just a volunteer on this forum.

• The HP Deskjet all in one printer/scanner has no control on the printer, then how to scan?

  I can print wireless from my iPad to my printer/scanner HP Deskjet 2540, but cannot see how to scan from the email on my iPad unit. Is it possible to download the control panel scanner/copier on my iPad?

  Hello

  You can scan using the HP all-in-One Remote app, available for the App Store.

  You can find a step by step instructions below:

  http://support.HP.com/us-en/document/c02486319/

  Shlomi

• Re: Drivers for printer Scanner Fax E-studio 200s

  Hello guys,.

  I have the model e-studio 200 s (printer + scanner + fax) and I can't find the drivers.
  I visit the http://www.eid.toshiba.com/support/drivers/drivers.shtml and I download the drivers for GA-1030 and GA-1031.
  I try and the USB and Com port but nothing.

  Firstly, I download the right drivers for my machine?
  And on the other hand, I want to use 2 PC (server: win2000 and second in windows xp + sp2).

  Thank you.

  Hello

  Why you chose the drivers for GA-1030 and 1031 GA?

  You've got an e-studio 200s then choose the copiers-e-Studio 200 >

  Then, you should get the correct drivers!

• HP Deskjet Ink Advantage 3835: My HP printer Scanner does support the OCR feature?

  My HP Deskjet Ink Advantage 3835 printer Scanner does support the OCR feature?

  Of course, do all scanners. It's the software, not the scanner.

  Free OCR software on the web.   Just search.

  FreeOCR

  or

  Free OCR to Word.

  Both work very well.

• Help! My photosmart hp c310a printer/scanner will not analyze of my HP Director... that has happened?

  I had to reinstal my photosmart c310a while only printer.scanner, now my scanner does not work in HP Director... what would have happened?

  Hello

  Please specify your operating system version.

  Director HP wass used in the old Macintosh or Windows versions... in any case it is not compatible with the new device as the Photosmart C310...

• Pavilion 23 and Photosmart7510: try to connect the 7510 Photosmart HP printer / scanner / efax / copy to HP Pavilion 23 w / windows 10

  I am trying to connect to the HP Photosmart7510 printer / Scanner / Efax / copy of my HP Pavilion 23 running Windows 10. Whenever I put in the printer installation disc, it says ' this will only work on devices running windows 7 "and some other stuff. Is there anyway that I can connect these two? I know there must be. someone please help, I just spent 600 on this printer!

  Hello

  The original CD was made before Windows 10 release and it is not intended for the operating system.

  Follow the HP printer Assistant facility below to get the latest version of the printer software:

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Kind regards

  Shlomi

• Impossible to uninstall an HP printer/scanner

  I have also try to uninstall a printer/scanner HP Photosmart. It seems that everyone is extremely frustrated with HP products because they do not work as well as they should. They seem to be poorly designed and not at all strong. The service backup of the company seems to be lack luster in the best of cases (as can be seen on many calls with frustrated users!). I suggest that all new HP non-functioning products should be returned to the dealer/company because they are not fair quality and market!

  Microsoft Answers pages does not seem to appreciate that they do not deal with novices but with seasoned users, trying to solve a frustrating problem. Remedies and suggestions are very tasteless bland (worthy but useless)!

  What should do? It is not possible for Microsoft & HP boffins come together to produce a useful software that will quickly & effectively remove all the remains of drivers HP thugs and registry or keys key sub from a PC?

  What can save the world much time & money as long as the number of solutions to the problem seem to be endless and (in my case) ineffective, unless...

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  Follow the form of measures troubleshooting article and check if that helps.

  Uninstalling the printer software

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02259020&LC=en&cc=UK&DLC=en

• 41 - printer & scanner error code use

  original title: use printer & scanner

  What does the error code 41 & where to find how to fix it

  There are a few reasons for the code, but all relate to the material...

  It's a... http://support.Microsoft.com/kb/310123

  It would be useful that you could provide the brand and model of the equipment generates the error...

• Where to find the lock of the Pixma MG6320 printer scanner?

  Hello... Where to find the lock of the Pixma MG6320 printer scanner?

  Hi set231,

  PIXMA MG6320 is not a scanner lock switch.  If you try to set the printer for transport, please follow these steps:

  1. turn the unit off.

  2. confirm that the POWER led is off, and unplug the machine.  Please do not unplug the machine while the POWER light is lit or blinking white, as this may cause a malfunction or damage to the machine, the machine impossible to print.

  3. remove the output paper support, and then close the paper output tray gently.  The output tray extension is retracted automatically when the paper output tray is closed.

  4. disconnect the printer from the computer and the machine cable, then connect the plug to the machine.

  5. use duct tape to secure all covers on the machine to keep them open during transport.  Then pack the machine in the plastic bag.  Fix the material of protection to the machine when the machine to pack in the box.

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Pavilion J410: supported printer/scanner for Windows 8.1

  Hello

  8.1 Windows does not support my printer/scanner HP J410.  It works on my laptop, but it's a pretty prehistoric, with Vista OS.

  So, what can I do for that device installed on Windows 8. 1 as well?

  Hi @deurs7,

  Welcome to the Forums of HP Support!

  I see you're wondering if the "J410 HP" is compatible with Windows 8.1. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  You probably use pilot integrated window, which is causing you issues. I download and install the full feature software and drivers for your printer.

  In order for me to help you better, I will need more information.

  I'll assume you have the HP Deskjet printer, which of you have?

  What is the name and the product number of your printer? How can I find my model number or product number?

  HP Deskjet 1050 has all-in - One Printer series - J410

• HP Probook: Finger print Scanner

  Hello

  I've just updated my

  HP ProBook 450 G2 Base model Notebook PC

  the hp windows 10 client security, had to be uninstalled for the upgrade will take place and now after the upgrade, that I have no idea on how to activate my finger print scanner to log on to windows. I tried all settings, there is no download option to activate the scanner even though I have the dirvers installed scanner.

  Help, please

  @dradeel

  Download your drivers updated here.

  The fingerprint, one is under input devices.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6943827&swLangOid=8&swEnvOid=4192

  REO

• What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

  I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

  Hey Fed-Up-with-HP,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

• I need help for my printer/scanner/copier to work with my computer

  I have a problem for my computer to connect with my printer/scanner/copier.  I need help!

  Hi GraceEverts,

  ·         What exactly happens when you try to connect printer/scanner/copier to work with my computer?

  ·         You receive an error message?

  ·         What is the brand and model of the printer/scanner/copier?

  I suggest to check the following items and check if it helps.

  To add a printer attached to your computer

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

   

  To install new or updated printer drivers to update

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_drivers_install_updatew.mspx?mfr=true

   

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

   

  To install a scanner or digital camera

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/scanner_camera_add.mspx?mfr=true

  Hope this information helps.