Task 4-5: installation of the PeopleSoft Application software

Similar Questions

• SSO causes user sessions expire while users work in the PeopleSoft application

  Hello

  
  

  OAM and PeopleSoft is integrated into our environment for SINGLE sign-on.

  
  SSO is delay, even when you work actively in PeopleSoft. We have other applications are also integrated and only when the PeopleSoft application is open (either alone or with other apps) SSO is expire.

  
  

  The version of PeopleSoft is 8.52
  

  What could be here? Are there any other changes of configurtion.

  
  

  Thank you
  

  Please check the session timeout and OAM idle time-out settings. 11.1.2.2 version here is the link  https://docs.oracle.com/cd/E40329_01/admin.1112/e27239/session_R2.htm#AIAAG35379

  The url shows the settings that are on the side of the OAM. For the PeopleSoft application IE please check session timeout settings, and idle time-out and ensure that they correspond with the CAO end session settings and the idle time-out. In addition, you can set the value to 0, which effectively disables the setting. You can try to set the value to zero for purposes of test and see if that helps your situation. FYI, you may need a service restart OAM managed once you change the settings for session/idle timeout is taken into account.

• My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator. I am the only user on this machine

  My computer will not allow the installation of the Adobe Air software, a message informs you that I must refer to the administrator, I'm the only user on this computer.   Help please.

  Thank you, Nicholas Cooper.

  Here you go:

  1. Right click on the installer.
  2. Click on "Run as Administrator".

• Installation of the failed application sent my PC into chaos.

  From: IANV

  Installation of the application failed (PCPitstop Optimize2 - but they say, they have never heard of my problem) sent my PC Home Premium into chaos. Then a spiral of attempted led to serious start-up failures, Startup Repair launching each time. Finally it seemed to find a Restore Point that worked well enough to reinstall and update my suite of Bullguard security and backups of data online and my SpySweeper anti-spyware protection. I could also get in Safemode again - but only to define in the Configuration of the system - not with presses F8. (Actually on splash screens initial, if I get no options at all pages the up/down arrow keys do not work and I always accept the default anyway).

  But after a week of running OK which included various restarts the boot failure problem is back - requiring one or more restorations to start at all. I dare not now have warning messages of nag of Microsoft on reboot (in order to complete the facilities of repeated updates, who took the restorations).

  Also a post without an answer on a forum cited another problem that I find now that I have too - while active rest horses, burning data on a backup CD does not complete and the reader hangs...

  Can someone help urgently?

  --

  See you soon,.

  IanV

  From: DL

  You have installed a product of "snake oil" on your PC, and this facility a bad tour, who knows what he has done for the system. Of course, you have been unable to repair or restore the PC to a date prior to this installation. Back up your data, clean reinstall Vista and keep away from products that claim to optimize / scan / repair

  Another response of the community of Windows Vista discussion groups
  

• cannot log on more creative cloud after the installation of the new application manager (7.0)

  

  the first capture is coming after the start of the adobe application manager and the login process. and the second is to come after trying to connect to my folio generator.

  connect to the adobe Server works because if I get an incorrect password I received the normal message that my ID and password is wrong... it's when the credentials are ok I get this message

  to apologize for my bad English and french screen...... lol

  Michel

  I managed to solve this problem with the last solution.  Essentially, it was a file that it be removed from your library.  This solves the problem immediately and I download the apps very well.

  Here is the link to the solution that worked for me: http://forums.adobe.com/message/5420692#5420692

  If you're on Lion you will not be able to see your files in the library, then go to the Finder, click GO all holding the key pressed Alt and it should appear as an option.

• installation of the HP scanning software

  Hello

  I have a Photosmart 5515 (a 5510 duplex I think!).  I have run windows 8.  Install the driver and I can use the printer as the printer - connected by USB cable.  I can even scan a document in WORD using ALT I P S.  But I can't get the system to install the HP scanning software.  Whenever I try to install using the HP download (file PS5510_1315.exe name), he extracted the file and then asking you to identify the printer.  He does not see the existing driver and it says to plug the printer into an available USB port.  Its already plugged in of course.  It will not allow me to go further.  I tried (I think that (all combinations including the removal of all the softerae of hp on the computer, remove the printer from the Control Panel, unplug the printer and restarting the conmputer to get a 'clean' install.))  All to nothing does not.  I tried every way.  I tried the such HPPSDr as recommended by HP.  When run, it recognizes the printer, talk to the printer, asks if I want to fix scanning and crosses two scans (the printer buzzes far happily) but then comes with the message window titled "HP TWAIN" "HP Photosmart 5510 series is not found."  This is after she has had discussions with the thing!  Within this program of doctor, you can ask to solve printing problems too.  When I take this road all is supposed to be good.

  What I am doing wrong - I know that IIT should be simple, but I can't.  Thanks in advance.  John

  Hello

  Try to run the HP printer below installation wizard by following the steps, don't forget to keep the USB connected before starting the tool:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/PIW/&softwareitem=MP-115766-2

  If it persists, I would also try a different USB cable, directly connected to your PC and not via a hub or extention, a USB 2.0 and not a USB 3.0 cable and not longer than 2 metres long.

  Shlomi

• Cannot enable the firewall service in Windows Vista. Prevents the installation of the HP printer software.

  I'm trying to install the HP printing software, but the error message that the firewall must be enabled. However, I'm unable to turn on the firewall. The sytem keeps taking me in circels telling me I can '; t activate the firewall because the service is disabled.

  Anyone have this experience? Suggestions to solve? Thank you!!

  PS: I use VISTA w/SP2
  

  Hello

  How to turn on the firewall enabled or disabled in Vista Windows
  http://www.Vistax64.com/tutorials/92697-Windows-Firewall-off.html

  Check dependencies and their dependencies here:

  http://www.blackviper.com/WinVista/services/Windows_Firewall.htm

  For Services

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  (Means that you can right-click on the command prompt and RUN AS ADMIN).

  ---------------------------------------------------------

  Some antivirus/security products may cause this error. McAfee, Norton, Windows Live OneCare.
  ThreatFire are some. What antivirus/antispyware/security products you have on machine now. And
  who have you ever on it, even if you have uninstalled them. (These leave the remains that can cause some)
  strange questions.)

  Check the default services and dependencies to ensure that they are running.
  http://www.blackviper.com/WinVista/services/Security_Center.htm

  Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/

  How to fix Vista Reporting incorrect information Security Center
  http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.html

  How to disable or enable the Security Center in Vista
  http://www.Vistax64.com/tutorials/67737-Security-Center.html

  This thread might help as it might be a permissions problem.
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/

  =====================================

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When and how do to restart the device after the installation of the Java application

  In what circumstances, it is necessary that device a reboot after installing application OTA or via the Desktop Manager?

  How do no need to reboot after installing application OTA or via the Desktop Manager?
  config or file alx jad file?

  Thank you all.

  Hi yangjiang2k,

  try to find out the http://www.blackberry.com/developer/

  It contains many references...

  just to help you get started, try to read this:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800620/What_Is...

  Cheers!

• Installer for the multi-CD software using USB mass storage

  IdeaPad S series computer pc laptop with no cd rom devices, programs can be installed using the mass storage device, such as usb flash memory. It works very well for programs that have a single cd size. However, when the size of the program is larger than a single cd, so I don't know how to react to the request "Insert the next CD and click OK". Please let me know how to do.

  Thank you for your advice. However, I still want to know how to do because it's sort of my technical challenge.

• Installation of the Trial Version of Photoshop cc (2015)

  Towards the end of the installation via the creative application Cloud Desktop, my anti-virus (Bullguard) has blocked the download of a file that looks like Camera Raw 8.  I am unable to complete the installation whithout disable anti-virus which I am reluctant to do.  I have the details of the message block.

  Please visit:-error U44M1I210 | Install updates

• Apple Configurator 2: Installation of the application blocks / loops over the placeholder of transfer

  I tried to set up a cart with Apple Configurator 2. I'm in iOS 9.2, iPad 2 Air and El Capitan. I tried to put in place following the blue print instructions, but that, as a dismal failure as this resulted in 16 of the 20 iPads being brick. So I was their implementation of a group of 20, first install a profile and installing apps. I tried to install my apps, but which have resulted in a loop and the errors that have no definition massively. So now I install apps in small groups of 3-5 applications. The problem that I am running is sporadic looped / hung when I install some applications. There seems to be no rhyme or reason. When I try to install the application on its own, the problem persists. It hangs at step "installation of placeholder. So far, this has happened with: Garage Band, Photo Collage and Socrative Teacher Edition. To solve the problem, I have to 'remove' the partially installed apps and then renounce install the specific application. Even if I try to install the application on its own, the problem persists. Any suggestions on how to fix this? I'm banging my head against the wall here. I'm on hour 25 + (not counting the nights where I hit a button, go home and come back on a random error).

  Thank you!

  I'm having the same exact problems, described to a T, I also try to update / prepare several wagons and Config 2 has recently been the total scourge of my work. I love the interface and think I have a solid understanding of how to use the program, but the process never ends. I thought whole point of the program was to be able to add/remove/update / manage iPads massively, but it seems to be able to get everything that fact I can only work with 2-3 iPads, both. Even so, I also have problems with remains of place holders or partially installed or removed applications. Please let me know if there is anything I can do to allow this program to run more smoothly.

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• Stand alone driver for the minimal application installer MyRIO

  Dear all,

  I'm trying to deploy a full installation package for a laboratory study, which would include:

  1. exe application file compiled from a VI. This VI connects to the MyRIO via network flow.

  2 labview runtime engine

  3 driver for the USB LAN unit MyRIO.

  First 2 steps succeeded, and the VI communicates with the device via WiFi MyRIO. However, I would like to connect trough USB and need a driver on the host machine. Installation of a complete driver package is certainly an overdose for this occasion.

  Therefore, I'm looking for someone to report to a minimum installation package that would ensure good communication with MyRIO via USB.

  Regarding kind.

  Česlav

  Thanks for the quick response Sam K

  .

  After all, I found the file msi corresponding to the LAN drivers on the DVD myRIO. There is a separate driver for win XP, that does not work on my Win 7 64 machine. The following file actually worked very well "NiRio_USBLAN64.msi" with the associated cab file. Without the rest of the CompactRIO drivers it does not appear as MyRIO, but as a generic USB LAN adapter device. Connections work properly, exactly what I was looking for :-).

  The bad news is that when you create an installer in the construction specifications, the .msi files are not considered as executable files and can not be integrated in a single installation procedure. Students will have to make several more clicks.

  I also noticed that CompactRIO drivers can be integrated into Setup completely, which facilitates the procedure, but adds an another 150 MB to the installer against the 3.5 MB for only the LAN driver.

  Maybe this thread will help someone else.

  Greetings,

  Česlav

• conflicts for the installation of two labview applications

  Hello

  I have two applications LabVIEW 8.6 and can make the executable, then the installation for each of these files in the Project Explorer.

  After that I installed the FIRST application and when I want to install a SECOND, during the installation process, it indicates a newer version is currently installed even though I select a different installation path. The button "Next" is disabled, as shown in the attached screenshot.

  On the other hand, if I install the SECOND application first and then install the FIRST application, even if the installation paths are different, it installs the first application successfully but removes the second request.

  I don't know how to install both applications, one after another, regardless of the order. I appreciate any help or comment.

  See you soon,.

  Ali

  Make sure that both versions have a different code level.

  (Builder installer... Version information... Code upgrade. Simply press "generate" to create a new one for the installation program that is not working)

  See also this help page

  (If both have the same upgrade code, windows thinks that they are the same program and keeps only the higher version)

  (This image comes from 2015, do not know if it has the same appearance in 8.6)

  

• My task manager only to see the task and not, application, process, etc. How can I get it back to normal?

  My task manager only to see the task and not, application, process, etc. How can I get it back to normal?

  If it does not display all the tabs, double-click the external border of the Task Manager.