Task parallel library

Similar Questions

• Web App search results to display the TASK parallel library instead of the list view

  Is it possible to get the search results Web App to view a presentation BPD instead of the standard list view?

  If it is possible the call would go on the form or on the page of results? (currently, use the same results page for several web applications.

  Thank you!

  Not quite sure what your after.

  You can send the results of research to a custom page, I think you did that? This page can have its own model.

  The module itself for the search results:

  {module_webappsresults, bkp, resultsPerPage, hideEmptyMessage, rowLength, sort}

  They are key elements where bkp being true means that search results will use the backup of the web application on the main list.

  If you apply the rule of custom template by adding a space and a model = "PATHTOFILE", you can specify the search results to use a custom template.

  http://helpx.Adobe.com/business-catalyst/partner/using-custom-templates-modules.html

  None of this is what your after?

• After creating a task, it is not listed in the Task Scheduler Library.

  Hello

  I created a system task to the system log. It was supposed to send an email to me whenever the event is logged.
  After saving it, I wanted to get to the Task Scheduler Library, but it has not been listed. I tried to create the task again, but it is said that a task with the same name already exists. The event took place, and when I looked at the status of the task, it shows the name of the task with the result of success.
  How can I remove / edit the task when I can't? Help appreciated.
  Thanks in advance
  Richard
  original title: event schedule

  There is a small arrow to the left of the entrance to the Task Scheduler Library, click the arrow to expand the list to view tasks created by the system.  Then browse folders to find the one that you created.

  Defragmentation, just for example, is to

  Library of Task Scheduler, Microsoft, Windows, Defrag

• Is it possible to rename an existing task in Windows Vista Task Scheduler Library, in the computer management console?

  The 'Name' field seems to be greyed out on existing tasks, even if the other attributes of these tasks can be changed.

  Hi Casey,.

  Thanks for posting the question on the Microsoft Community Forum.

  Want to know how to rename a task into task schedular, I suggest that you try the steps mentioned below.

  a. in the Task Scheduler, highlight the task in question.

  b. click on export and choose a location to save the file (office is as good a place as any).

  c. click Save.

  d. in Windows Explorer, navigate to the location where you saved the file.

  e. you can then rename it as usual. Back in the Task Scheduler, click the import job.

  f. navigate to the renamed file.

  g. click OK.

  h. now highlight the original task (do not forget that there are now 2 tasks, one with the original)

  name and one with the new name), then click on remove.

  Hope the helps of the steps.

  If you have any questions/comments more on Windows post on the Microsoft Community Forum.

• How can I remove a scheduled task?

  I want to know how to remove a scheduled task, I did (instructions for making one here: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/thread/6339f3d6-504d-4275-857a-4307a4cbe9ff), but all I can find on the subject does not work under vista, or just tell me how to end it--which is not sufficient, because it runs automatically when I connect. Could someone show me please how to do this.

  I finally found the answer. Go to task sheduler > task scheduler library(left pane), and then you will see the list of tasks that you can edit and delete.

• What is the average by "the task image is corrupt or has been tampered with. User_Feed_Synchronization-{3EC8FA92-41FD-4247-8c1b-2352FD58BE80}"... .it for the task planning

  I use Windows Vista Home premium 32-bit

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · When you receive this error message?

  Try the method below:

  a. open Task Scheduler.

  b. on the View Menu, select the option "Show tasks hidden".

  c. in the left menu, select "Task Scheduler Library".

  d. in the central section, the task of "User_Feed_Synchronization" right click and select Delete.

  e. exit the Task Scheduler.

  Then, select start / accessories. Right-click "Command Prompt" and select the "Run as Administrator" option.

  a. click on 'Continue' on the UAC prompt.

  (b) in the command window, type the following command: msfeedssync enable

  c. press ENTER.

  Note: This command will replace and update the task "User_Feed_Synchronization". This will not affect the news FEED that you subscribe to.

• Image of corrupted task of disk defragmentation

  When I try to defragment my hard drive a popup appears saying: "the task Image is corrupt or has been tampered with.  User_Feed_Synchronization-{93869917-6BA9-4AC4-AfOA-1FOB2672 A8FA}. "I went into the Task Scheduler Library to try to change the settings and the same popup upeared.  So I deleted the defragmentation task and put in a new defragmentation task account new parameters and the following window will appear: "an error has occurred for task defragment the hard drive."  Error message: user account restriction error.  Possible reasons are that blank passwords not allowed, or as a political restrictions has been applied. »

  I can't adjust the defragmentation to run if the user is logged in or not.  It keeps the setting because only when someone logs on and only at 01:24:12.  I can't change the time of execution.  Whenever I put new triggers for the task the first popup appears and everything remains the same.  The last execution in Scheduler bed '' never. ''

  I have run full scans computer virus/malware with Microsoft and Charter Security Suite, and they came up empty for the problems.

  I'm not very computer savy and don't know what I can do.  My best guess is that someone put a virus in my hard disk to mess with the defragmentation task, but nothing in the scans rises.

  Any help would be appreciated.  Thank you, community.

  It would be a good idea to run the System File Checker tool if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _________________________________________

  Here is some information about the Vista defrag and a good alternative to use:

  The Vista defrag works quietly in the background without intervention on your part

  http://support.Microsoft.com/kb/942092

  In Windows Vista, there are a lot of improvements in the defrag engine and handling of fragmentation. By default, Windows Vista uses Task Scheduler to automatically keep the defragmented hard drive. This Automatic defragmentation does not affect the performance of the Windows Vista operating system...

  If you want to use a much better defragmentation program which is free and where you can see the results, I suggest this one:

  http://www.Auslogics.com/en/software/disk-defrag/

  See you soon.

• Task Scheduler has stopped working

  This message is displayed every time that I plug in an external display on my Dell D430 laptop device.  My Microsoft wireless keyboard stops working, like the mouse.  The display used to propose automatically sized correctly, but now it doesn't either.
  This also happens when I use the docking station.  Sometimes, the USB ports do not see my external devices that occur, as well.

  JimPuerto,
  There is a task in Task Scheduler called TMM (Microsoft transient multi-monitor Manager).   Try to go into the Task Scheduler and disabling TMM (Microsoft transient multi-monitor Manager).

  To access the Task Scheduler in Vista, go to the Start Menu and type Task Scheduler in the search box.  In the "Task Scheduler Library", select Microsoft-> Windows-> MobilePC.   "TMM" right click and select "disable."  You will need sign out and then sign back in to make the changes take effect.

  Please post back and let us know if this solved your problem.

  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Corrupted immage Task Scheduler

  When I start the Task Scheduler it is said in a message tha the immage was altered or damaged. You have a solution?

  Hello

  1 did you change on your computer?

  2. What is the exact error message you received?

  3A this works much earlier?

  This problem occurs if the scheduled backup task is corrupt. Task Scheduler service is responsible for the actual planning of the tasks. Because Task Scheduler uses the file system to store information about the task, it is possible to enumerate and prepare tasks without the help of the service, but you won't get very far without him. Task Scheduler may not recognize tasks that are written directly to the file system and will probably refuse to perform tasks that have been tampered with.

  Follow the step below:

  The scheduled backup job is possibly corrupt. Try these steps and check the result.

  Step 1: Remove the task in the Task Scheduler

  a. Click Start, type Task Scheduler and click on enter.

  (b) in the left pane, click "Task Scheduler Library" and select the backup task in the center pane and delete it.

• Image of task (0 x 80041321) in the backup settings is corrupted on Windows Vista

  Original title: can not save

  I want to back up my computer, but it won't because there is a picture of task (0 x 80041321) in the settings of backup that is corrupt. What to do now?

  Hi Lizbie,

  (1) if it works well before?

  (2) remember to make changes?

  Method 1: Run the fixit available in the link below and check if it makes a difference.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  Method 2: Re-set up backup - users have solved similar issue by following the steps below:

  (a) go to Task Scheduler (run taskschd.msc from a command prompt OR RUN dialog box)

  folder b) navigate under Task Scheduler Library-> Microsoft-> Windows-> Windows Backup

  (c) delete the automatic backup task

  (d) remove the job from the Windows backup Analyzer

  (e) try to re - set up backup

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• How can I configure a task in the Task Scheduler to restart my PC every day at a certain time?

  New pc from Dell under Win7

  1. Press the Windows key + R > type taskschd.msc and press enter (it will launch the Task Scheduler)
  2. Click with the left button of the right pane on the Task Scheduler Library > open Action on the menu at the top of the page > new folder... > name MyTasks > click OK
  3. Left-click on the MyTasks > menu, choose Action > create a basic task... (it will open Assistant tasks)
  4. You can enter the name , for example "restart" and press Next
  5. In the trigger section, you can specify when you want to run your task, for example:
     • Select daily and press Next
     • Now, you can specify the day, time and the game to be repeated daily, after that press Next
  6. In the Action section, you can choose what you want to run, for example, restart your system to do this:
     • Choose start a program and press Next
     • in the area of program/script, type shutdown /r and press next
  7. And that's all, you can press Finish

• Task Scheduler error: "... task: the task image is corrupt or...»

  When I run the Task Scheduler which exactly follows the error message appears in a popup window: ' task32498346 task: the task image is damaged or has been tampered with. " None of the "solutions" I read on internet activity for me. Very detailed solution from Microsoft Support does work for me because the first step is to go to Task Scheduler Library and find the folder in which the corrupted task is in. I carefully searched the whole library, and there is certainly no 'task32498346' in the Task Scheduler Library. I'm not aware of all this causes me problems. Everything seems to work OK. I came just to have stumbled on this because I was curious how the Scheduler works. I looked in Services and Task Scheduler started. Despite do not cause me problems, I know, I want to get rid of this popup error message. Can someone help me, please?

  (Moved to repair and recovery)

  Yes. The Earth is round. Does this have to do with my question?

  -> OK, I'll specify it in detail. You must search for the folder C:\Windows\System32\Tasks of the existence of the file that generates the error message, i.e. task32498346. The file may be hidden.

• Difficulties to use Task Scheduler to update the database of the program

  Hello

  I would like Win 7 Task Scheduler to cause Locate32.exe Explorer file update there database every 45 minutes when I am connected. (Locate32 can do it by itself, but must operate continuously in the background to do).  I'm obviously not in the right info, because it does not work for me. I got the details to enter another site, as I am not familiar with the Task Scheduler.

  Task field name walked - locate32.

  In trigger I select daily

  then by selecting a time of 5 minutes before present, to test works

  then, in the action, I'm selecting Start a program

  then in program/script I enter 'C:\ProgramFiles\Locate\locate32 '.

  then in arguments - U

  Usually it is a notification when I update of database Locate32. This does not occur with the scheduled task, and when I look in the Task Scheduler for tasks that have been made, this one does.

  I checked the user information is correct.

  Please could someone tell me what I should do instead? Thank you, Jay

  Hello

  We apologize late in the response. This problem can be caused by incorrect settings.

  To display hidden scheduled tasks, follow these steps:

  1. Click Start. In the search box, type Task Scheduler. Then, in the list programs, click Task Scheduler.

  2. On the view menu, click Show hidden tasks.

  Try to re-create the task and check if it helps:

  1. Press the Windows key + R > type taskschd.msc and press enter (it will launch the Task Scheduler)
  2. Click with the left button of the right pane on the Task Scheduler Library > open Action on the menu at the top of the page > new folder... > name MyTasks > click OK
  3. Left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks)
  4. You can enter the name , for example "restart" and press Next
  5. In the trigger section, you can specify when you want to run your task, for example:
     • Select daily and press Next
     • Now, you can specify the day, time and the game to be repeated daily, after that press Next
  6. In the Action section, you can choose what you want to run, for example, restart your system to do this:
     • Choose start a program and press Next
     • in the area of program/script, type shutdown /r and press next
  7. And that's all, you can press Finish

  Let us know the status.

• Failed to create task scheduler to restart the system automatically within the given interval

  Dear experts,

  I have two accounts on my computer. One was a Director and another was normal user. but the two users are protected by Word.

  When I log in as normal user, how can I set a task in the Scheduler to restart the computer once every 6 hours.

  Thank you

  KP Swamy

  Hello PK Swamy.

  Welcome to the Microsoft Community Forum.

  The Task Scheduler service lets you perform tasks on a chosen computer automated. With this service, you can program any program to run at a convenient time for you, or when a specific event occurs. Task Scheduler monitors the time criteria or the event that you choose and execute the task when these criteria are met.

  I understand that you are not able to create the Task Scheduler to restart the system. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I suggest you try the following steps to create the Task Scheduler:

  1. click on start, type taskschd.msc in the start search box and press enter (it will launch the Task Scheduler).

  Note: If you are prompted for an administrator password or a confirmation, type the password or provide confirmation and click Ok.

  2 left click in the right pane on the Task Scheduler Library > open Action in main menu > new folder > name MyTasks > click Ok.

  3. left-click on the MyTasks > menu, choose Action > create a basic task (it open Assistant tasks).

  4. you can enter the name , for example "restart" and click on Next.

  5. in the trigger section, you can specify when you want to run your task, for example:

  a. Select daily and the press Next.

  b. now you can specify the day, time and all reproduce on a daily basis, after the press Next.

  6. in the Action section, you can choose what you want to run, for example, restart your system to do this:

  a. choose start a program and press on Next.

  b. in the field program/script , type shutdown /r and click on Next.

  7. click on end.

  Check out the link:

  Schedule a task

  http://Windows.Microsoft.com/en-us/Windows/schedule-task#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you