Cannot install IMVU application, get error not a Win 32 application

Similar Questions

• Try to open the .pub file - get error not valid Win 32 application

  Try to open the .pub file - get error, not a valid Win 32 application

  Help, please

  Thanks for your suggestions.  I have both Publisher and InDesign.  I was able to open this type in the past using Publisher. ???

  Hey bets4jandj

  It helps when you provide in your first post information about what programs you have pertaining to your problem

  Make sure that they have all of the defaults and set file associations correctly

  read the information below about

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  Walter, the time zone traveller

• Cannot install Vista SP1 - getting error code: 0x800F0826...

  I'm trying to update my computer toshiba with SP1 and SP2 on Vista Home Premium, but I get the following installation was not successful error code: 0x800F0826... Please advise!  Thank you.

  1. it fails during the installation...
  2 - no changes were made to the computer to my knowledge... I was never able to install SP1.

  Windows Update error 800f0826 is displayed when an update for Windows has failed to install and prevents you from installing additional updates. Error 800f0826 does not identify the update that caused the problem. The update that caused the problem will display a different error. This problem affects only the updates for Windows and does not prevent you to install or to automatically receive updates for other Microsoft programs, such as Microsoft Office System. Ref: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800f0826

  Please check updated code and the previous error and post back with the details of the same.

  Thank you.

• Cannot install Kodak printer getting error 0 x 00000002

  I've been back with computer Kodak and HP - technical support HP laptop with Windows 7 installed. They blame each other and are unable to resolve it without restoring my laptop to original settings (losing all my installed programs).  The Kodak printer is an ESP 6150 and it seems all the software and install updates, but when I try to set up the printer, it recognizes the printer is there and immediately I get the error message 0 x 00000002

  FINALLY... THE REAL SOLUTION!

  Here's the real solution directly from Kodak:

  The problem is with Windows 7 64-bit architecture. You will need this MS XML missing from here:

  www.Microsoft.com/downloads/details.aspx?FamilyID=7f6c0cb4-7a5e-4790-a7cf-9e139e6819c0&displaylang=en

  Click on the first download link: msxml.msi (2.0 MB). Download to your desktop or where you can find it easily.

  IF (IF) you've already tried installing Kodak with failure, uninstall the printer by clicking Start > Control Panel > programs > uninstall a program and choose all the Kodak software.

  Then click START, type RUN. Type services.msc. From there, you can see the list of current services. Find print spooler and select Restart in the upper left corner. If you see Hello or associations with Kodak, restart them. Click on exit.

  Return to your MS XML download and double-click it to run it. It will close automatically after installation.

  Now go to: http://support.en.kodak.com/app/answers/detail/a_id/17138/selected/true

  Download it on your desktop or where you can find it easily.

  Double-click it to run it and follow the instructions.

  It will work for Kodak EasyShare 5500 AiO as well as other Kodak printers.

  Breathe and the best of luck!

  Father Bowdern

• Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.).  Any ideas?

  Was able to download and install the Prime Minister, but cannot install Photoshop Elements - get several error messages (software hacked, etc.).  Any ideas?

  Download from adobe.com or prodesigntools.com site.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• When you install Adobe Presenter, get error message not compatible platform.

  When you install Adobe Presenter, get error message not compatible platform.

  Check the tech specifications to see if your system meets the minimum requirements for the software.

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• you are prompted to install KB2509553, but get error 0x8024200D

  original title: you are prompted to install KB2509553, but get error 0x8024200D and no record of success to date in Add/Remove programs

  It is now the second time that we asked for ASSISTANCE for the exactly the same problem or a problem?

  We did a disk clean up and other tasks recommended in the first email response however it has not solved the problem?  We don't have time to spend hours on something and have no will of MSN?  Also, we have installed and run MSN fix and that did not work either?

  17/05/2012, you are prompted to install windows to date KB2509553, one on the successful 17/05/2012, six on 18/05/2012 successful, we failed on 19/05/2012

  and 3 successful on 19/05/2012, but when we check why so far failed us we raise error 0x8024200D and nothing for this date is reflected in our add/remove programs?

  I think there is a problem with that, so far as if it actually installed correctly it would not take ten 10 installs place same day KB2509553?

  Read this e-amil completely before answering and wasting my time telling me to do things I do every day by running Norton 360 version 6!

  Hi, Gordon J.RAVEY,.

  ·         Did you do changes on the computer before the show?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Cannot install updates custody saying error 0x8007007f.

  original title: cannot install updates custody saying error 0x8007007f. Why is this and how to fix this

  As my title says is that the problem can not install updates custody saying error 0x8007007f. Why is this and how to solve this problem and when I click on protector of windows it says cannot find program. How can I fix

  Hello

   
  1 are you facing this with any updates or specific updates?
  2 did you changes in the computer before this problem?
   
  Method 1: Run the patch from the link below, restart the computer and install updates.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2: Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
  Step 1: disable the security software temporarily.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2: Perform a clean boot and install the application.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem
   
  Method 3
  Restore the system to a system restore point when the computer was working fine. Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   

  Perform a scan of the SFC to solve the problem of Windows Defender.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

• Windows 7 64-bit. Cannot install itunes 9. Error... UNKNOWN

  Windows 7 64-bit. Cannot install itunes 9. Error... UNKNOWN\Compenents\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\0000219F20000000000000000F01FEC

  can anyone help. Cannot install itunes (in fact, that many programs seem not to install). Upgrade to Windows 7 Home Premium to Vista (big mistake!). I get the above error message. Please there is a simple solution

  Thank you

  Hello kev1234567,

  Thanks for posting on the Microsoft answers Forum.

  I suggest that you download and install the Windows Installer Cleanup utility to here.
  You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

  Once you have opened the Windows Installer Cleanup utility, it will fill all the programs installed on your computer by Windows Installer. Select iTunes and then click on the button Delete. It deletes all corrupted files or incomplete iTunes from your computer. Then remove the Hello and QuickTime. They will be both installed with iTunes again.

  NOTE: iTunes Store purchases or songs imported from CDs are saved in your my default music folder and are not deleted by removing iTunes.

  Then go to Apple.com and download the latest version of iTunes and try the installation again. You should now be successful in installing iTunes.

  If you're still having problems, please refer to the support of Apple records: http://support.apple.com/kb/ht1923

  I hope this helps.

  Sincerely,

  If please reply back and let us know if this helps solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot install the KB3104002 80071A2D error Code

  I'm going to get in trouble and cannot install the KB3104002 80071A2D error Code, Lenovo ThinkCentre Windows 7 Pro 64-bit hardware.

  I ran Windows update convenience store that did not help the results of execution:

  Windows Update error 0 x 80070057(2015-12-14-T-09_56_48A) NO FIXED

  Registration for the service is missing or damaged FIXED

  Problems to install the latest updates FIXED

  Problems to install the latest updates FIXED

  I downloaded and tried to run with the Windows Update Catalog, this did not help. I have set up the computer to run in a clean boot state and tried to install this did not help.

  Any thoughts suggestions help.

  Thank you

  Doug

  After masking the update sought KB3104002 updates and it found an another KB3100773 same as KB3104002 *. IE 11 updates and it failed. Ran SFC/scannow received the following Windows resource protection could not perform the requested operation. Run chkdsk/r, recovering orphaned files. Once finish if it corrects any mistakes, I'll try updates once more, otherwise I will update the PC.

  A ran SFC/scannow results: verification completed 100%. Windows resource protection could not perform the requested operation.  Run chkdsk /r to check the disk for errors and repair

  After performing the chkdsk/r install all updates especially the KB3100773 and the KB3104002 have to do with the Cumulative security for IE 11 updates

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• Windows Vista says that it cannot install updates and quote error code 800070490 - please advise.

  I have Windows Vista and get a message saying that Windows cannot install updates, citing the error code 800070490.   Can advise you on a solution, please?

  http://support.Microsoft.com/kb/958044

• Cannot install the updates, 800700c error code 1

  Cannot install updates get message failed and 800700c error code 1. required healp please.

  Hi Michael,

  You can try the steps in this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/cannot-install-Windows-updates-receive-error/ced31940-101F-4312-BB2A-acf0c5eaa35a