Task Scheduler with a click - once the shortcut.

Similar Questions

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Loading in click - once the Application OR assembly problems

  I created an application to measure the current consumption of a device in Visual Studio 2012. I built a library for the National Instruments USB-6008 and added the dll from C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2012\DotNET\Assemblies\Current, which is 9.9. Everything went well on my dev machine, so I pushed all the changes on the production server, which is packaged as a click - once the app.

  On the machine running the real click - once the application, I downloaded and installed the fir driver 9.9 from here: http://www.ni.com/download/ni-daqmx-9.9/4707/en/. When the request arrives at the point where it measures the current consumption, I get the error:

  System.BadImageFormatException: Could not load file or assembly 'NationalInstruments.DAQmx, Version=9.9.45.39, Culture=neutral, PublicKeyToken=4febd62461bf11a4' or one of its dependencies. An attempt was made to load a program with an incorrect format.
  File name: 'NationalInstruments.DAQmx, Version=9.9.45.39, Culture=neutral, PublicKeyToken=4febd62461bf11a4'
  

  What I am doing wrong?

  The solution I found to this problem is to install the samples for Measurement Studio. Don't know why it has to be installed on the computer that runs the Clickk - once the App if.

• A click on the shortcut to Chrome, was directed to a different Web site. Went to the McCaffee help, now headed to Google, but could not connect.

  A click on the shortcut to Chrome, was directed to a different Web site.  Went to the McCaffee help, now headed to Google, but could not connect. Not a techie, advice? On a laptop with a Router 2 son. Thank you

  original title: unable to connect to Google Chrome

  Hello

  
  What operating system is installed on the computer?
  
  You can contact the support of Google Chrome for better assistance.
  http://support.Google.com/chrome/?hl=en
  
  Hope this information helps.

• How can I fix a runtime error 75. It only happens when I click on the shortcut of recently installed program.

  The program is called DinoCapture and is a digital camera for microscopic work.  It is stored in C:\Program Files (x 86) \Dino.  When I click on the shortcut it does not have the necessary screen but displays a run-time error 75.  I ran FixCleaner and also use Norton 360, which contains a firewall.  I would be grateful any adivice.  Thank you.

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If a program is particularly important to you, there is this way of trying

  but it's expensive, because you must have a previous operating system license to install

  This method also works in vista Home premium, BUT is not supported by microsoft

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=04d26402-3199-48A3-afa2-2dc0b40a73b6&displaylang=en

• When I right click on the shortcut icon, my screen begins to blink and I have to do a Ctl/Alt/Delete to return to display system and monitor to normal.

  * Original title: Steve M.

  I have My Documents on my Windows 7 desktop.  When I click the icon, an icon My Documents Shortcut.link then appears next to the My Documents icon.  When I right click on the shortcut icon, my screen started flickering and I mus do a Ctl/Alt/Delete to return to display system and monitor to normal.

  I tried to remove the My Documents icon, but who only 'pretending' in the file recycle.  Of course, I don't want to totally delete the My Documents!

  Any advice will be appreciated.

  Thank you.

  Although it is strange that the location of your documents is

  C:\Users\Steve\Doc

  Instead of

  C:\Users\Steve\Documents

  This result shows that the "My Documents" icon on your desktop is a shortcut and not the actual file with your documents.  The icon on your desktop has a blue arrow, like this:

  

  If you delete this icon, you should get a message like this:

  

  As long as the 'shortcut' word is in the message "Are you sure", everything you delete is a shortcut and not your actual files... so go ahead and delete it.  You can then create a new shortcut or just use the 'Documents' shortcut located on the start menu:

  

• I just clicked on the shortcut to undo key and then all photos are missing after I get my CF card

  How to get my photo because I just clicked on the shortcut to undo key and then all photos are missing after I get out my card CF.
  I formatted my CF card already.

  < re-titled by host >

  If you clicked the Cancel button right after the import, then you u did import. If the REFO option is available, click on it.

  In otherwise, re - import photos from the card again and do not click Cancel. If the card has been erased, see if you can use the Time Machine backup to restore.

• How to disable the "frequent" preview when I right click on the shortcut of Mozilla in the start bar?

  I want to disable frequent sites that appear when I right click on the shortcut of Firefox in the start bar. I mean this: http://postimg.org/image/869kxbg1r/
  Thank you!

  Hello AlinDW3, please try this: enter Subject: config in the bar firefox address (confirm the message information where it appears) & search for the preference named browser.taskbar.lists.frequent.enabled. Double-click it and change its value to false.

• Item selection listbox with right click of the mouse

  Hello

  I have a ListBox with unchangeable elements.  Y at - it an easy way to select an item with a click of the right button (like the left click)

  Create a structure of the event and generate an event on the mouse down? event.  Then use the button terminal to determine if the right button is pressed.  If it was, then set the value of this list box to the line that the mouse is over.  You can do this by using the invoke the end node.

• Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. He

  Using Player Adobe 11, now comes up with an error, once the file is opened. "Invalid Plugin detected, will waive the software Adobe reader." Close the program so cannot display PDF files. Running windows 7. I uninstalled and reinstalled the same Adobe. Help

  It seems that something has been added in the folder on the drive. I would recommend http://labs.adobe.com/downloads/acrobatcleaner.htmluninstalling the program, running, removing any left over parts of the record player (this could be the problem), reboot and reinstall. If all goes well, that solved the problem. Future questions about the player, you should consider asking in the forum of reader, is not.

• Why following appears when clicking on the shortcut icon on the desktop to go to Mozilla Firefox? Recently, it's new.

  Smartbar

  file///C:/Documents%20and%20Settings/Owner/Applications%20Data/Mozilla/Firefox/Profiles/al9rtzp5.default/extensions/%7Bbb45ef8e-1e36-4535-a017-ec908fb1e335%7/chrome/CT3101810/content/tb/al/al.view.html

  By clicking on the icon should go to my home page of CNN.com, but above appears in the library before the home page.

  Just do a tango of security to completely clean my system.

  Hello, it is likely that there is an invalid extension installed on Firefox. Can you please try to start Firefox in Mode safe and then see if you experience the problem

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• I can't navigate between tabs with a click of the mouse since I installed the latest version of Firefox

  Running worm 30. which is fine, but I can't switch between open tabs with a left-click of the mouse over the tab that I want to activate as I did for years. Use Ctrl-Tab place. Don't like this. This problem started with this version of FF.

  Try Firefox Refresh - reset the settings and Add-ons and if this does not resolve your problem, you can consult this article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems . I hope this helps.

• right click on the shortcut for sending a photo in e-mail

  If I right click a picture to send to someone, then appears the box that says SEND TO, and then I click on the MESSAGE and before, my Windows Mail program opens, but now it doesn't.  What's wrong?

  Make sure that your e-mail program is the default e-mail program.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Change the programs that Windows uses by default

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also try a system restore to before the problem:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• We can schedule with rman backup in the windows platform?

  My question is about the backup settings of my
  
  the idea is to all on the windows platform
  
  a weekly full backup (compressed backupset level 0)
  daily incremental backup of (cumulative) (even, level 1)
  an incremental backup every hour (bonus) (level 1)
  
  
  
  could you please tell me if the following examples will be adapted to my needs
  Thanks to you all

  I think you would need to do a .cmd file plan and then using the Windows Task Scheduler. I suggest you do a cmd simple backup file, try to plan and see how it goes.

  HTH
  Aman...

• How can I keep a wrong user name to come up with a click on the box?

  I typed an incorrect username. Now, when I click on the user name box to display my username, it displays the wrong name as a choice, but I don't want to show. Is it possible to remove this name?

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • http://KB.mozillazine.org/Deleting_autocomplete_entries