TECRA 8100 BIOS update problem - please HELP!

Similar Questions

• Tecra 8100 BIOS update

  I installed Windows XP on a different partition on my Tecra 8100. I downloaded the base BIOS Windows Update for XP, but it is ' t work the way says the tutorial.
  After you extract the files when I try to run then it gives following message-

  TOSHIBA common Module is not installed.
  Or you don't have administrator privileges.

  Package BIOS BIOS Version: Ver.2.50

  What should I do? Press OK to exit the application and another option is to save the BIOS files but where? Sounds good bit risky.
  Pls help

  Hello

  I put t found the common Modules on the European site, but you can find it on the Toshiba site we:
  Check this one:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlViewDL.jsp?soID=131045&MOID=1073769806&BV _SessionID=@@@1880519707.1142254157@@@&BV_Engine ID = ccciaddhfehigddcgfkceghdgngdgnn.0 & ct = DL

  Hope this helps you solve the problem

• Tecra 8100: bios update of cd. exe does not command line

  I want to update the bios of my Tecra 8100.
  I downloaded the bios, but the pc has no floppy, I cooked up a cd bootable like this

  When I start the pc, F2, press c to boot from the CD-ROM, I get in a dos environment. I went to the drive Z, "dir" and see the bios.exe that I've burned to cd. To run it I type bios.exe and continue to be 'command unrecognized file name' when I type dir *.exe, he does not see the file either.

  Maybe I forget something here?

  + The message was edited by: removed link - bad info +.

  Hello

  Your described method does not apply to Toshiba laptops.
  Each computer laptop manufacturers supports various BIOS update procedures

  Toshiba on this page we:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=356848&PF=true
  Here you can download the latest version of the BIOS for Tecra 8100

  The 4810.25 package must be unpacked everything first.
  Then you should check the files available.
  There is a readme.txt file that describes how to update BIOS using the ISO to CD.

  I hope I could help

• Vista update problem; Please help me.

  OK, so I'll try to be descriptive, so I can receive assistance.

  So I recently installed Vista on my new PC that I built (first time vista user). It runs, decently, I suppose. Well, I am informed of updates so I DL them. I noticed that this button appears in my Start menu.

  http://img164.imageshack.us/img164/5559/33609570.jpg

  It's the red dark with the shield on this subject. I click it and it takes me to this page where it says it is treating 46 ittems 1 or something. Once it finish with this process, it takes me to another, who says he is running step 2 of 3, but once it get - their configured say TI's fault the update and returns the process. I tried a few times and it does not seem to come out of this process. Why the habit they install correctly? Any help is welcome.

  Thank you very much!

  Yes, it could be a problem, because it was impossible to perform the reset of the authorization.

  So, option 1, try again the reset of the authorization:

  1 did you download and install subinacl.msi from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en#AffinityDownloads, note that the destination for the installation folder must be C:\Windows\System32?

  2. to check the success of subinacl.msi installation, try open in administrator mode command prompt, you should see C:\Windows\System32 > (but not C:\Users\>), and then type subinacl /?  to make sure that the subincal.exe is deployed successfully. 

  I hope that you would see "'subinacl' is not recognized blah blah blah...". ', this means that the subincal.exe either has not put in the right place, or it is corrupted. Should probably try to reinstall using subincal.msi. And re-run the batch in administrator mode, as you did.

  But in the worst case, if you see a menu of help for the subinacl, hm... Then there is no logical sense why you couldn't be able to run the command in administrator mode file. And it's probably best to try option 2.

  Option 2, there is another post on the same topic, by k Deepak Gupta, described the causes for the error code 80070005 and solution step by step.

• problem in the amd after update driver please help!

  Hello, everyone. I recently bought a laptop from Dell Inspiron 3521. It comes with a graphics card integrated AMD Radeon HD in 2 GB 8730 Mr. I have just updated my driver via

  Device Manager after it updated to version 12.x.x.x

  After that I restart my laptop and what my catalyst controller does not always close I uninstall the driver control panel amd and after I installed the default driver is provided with my laptop

  of that, I had my default amd driver: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15r-5521?driverId=VHY54&osCode=W864&fileId=3126513687&languageCode=en&dgc=SM&cid=248066&lid=4701742

  He doesn't sove my problem please help and there it remains firm and now in run dxdiag directx also does not work :(

  Help, please...

  
  

• new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  new pc with windows 8.1, and no downloaded installed cs5, no problem open deck and cs5, but cannot read the raw file, try to update, cannot complete or update failed, please help

  Looks like you have somehow the mac version.

  Download the updated windows 6.7 camera raw from this link:

  Adobe - Photoshop: for Windows: Camera Raw 6.7 update

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• Problem of Tecra M5 BIOS update

  I downloaded the file from the Toshiba site and now have P003Fv370.exe. Race that happens just with "update of the BIOS is not supported OS, unsupported operating system or service pack is installed". I was under the impression that it was independent BONES? Please help, I need to update to stop it crashing and blue screening me every half hour. I have already installed the value-added package.

  I have a Toshiba Tecra M5 PTM51E
  Running Windows 7 Enterprise
  Current installed BIOS is version 1.70

  I also read somewhere on the installation with a USB key, if someone could help I would appreciate it. Thank you.

  Post edited by: deleting
  Just tried again and it says "Could not create"C:\TOSHBIOS. " UPD file! "I don't know what is happening more.

  Hello

  The P003Fv370.exe is a package.
  Right click on that package and select unpack here.
  Now you should see the other folders inside this .exe package.

  From my knowledge, it takes a file that starts the BIOS update.

  If it won't work, I guess you need the original preinstalled system Toshiba update BIOS.
  The other hand I n t think that BSOD appears due to the old version of the BIOS.
  I guess that the update does not solve the problem.

  Maybe the BSOD appears due to a problem of critical software or hardware issues so would be really interesting to know if the same thing happens with the help of preinstalled Toshiba system

• Pavilion 15-n010tx: HP 15-n010tx BIOS update problem - no internet. Help!

  Hello

  On how to solve the problem of Intel VT - X on the BIOS, even if I enable vt - x on the BIOS it doesn't allow me to install HAXM. So I decided to update the BIOS. My BIOS version was F.66 A. I checked on the HP software and the download page for the BIOS for HP Pavilion 15 - n010tx. He showed two results:

  http://support.HP.com/in-en/drivers/selfservice/HP-Pavilion-15-n000-notebook-PC-series/5401225/model...

  

  I downloaded the update of the BIOS to F.67 and used the Setup program to update my BIOS sucessfully. But then I noticed that I can not internet CCADE on Google chrome. So I decided to restore the BIOS. But on his way, I chose the version F.67.A himself to a restore to. this has changed my current versions and earlier BIOS F.67. I tried to install the F.66 A by downloading its download file, but does not have that, the update of the BIOS in the installer option has been disabled.

  Tried to install A F.66 via external USB using HP_TOOLS and create image files. But during the installation it management through Firmware utility, it says "Unable to BIOS Open File signature."

  

  Maybe if I can find the correct SIG file, it will be solved.

  I messed up a lot. My pc boots fine. Everything is going well except the internet connection.

  Any help will be appreciated. Thanks in advance

  Nikhil-

  Hi all

  I managed to solve this problem of "no internet Connection" after a BIOS update "F.67 has ' on Hp computer pavilion laptop 15-n010tx with W8.1."»

  I just checked in IDM for recovery of a file download and it said 'cannot open the Internet socket. I did some research on Google and resolved this.

  The Solution is to:

  http://forums.techguy.org/networking/745349-open-socket-error-no-Internet.html

  ------------------------------------

  Press Windows + R and type CMD and press to enter.

  At the prompt, type:

  netsh winsock reset catalog

  and

  netsh int ipv4 reset reset.log

  -------------------------------------------

  A response by message 'Avistor '.

  Thanks to him.

  and thanks to "erico" for the quick response.

  Best regards

  Spoiler (Highlight to read)

   

• Tecra 8000 BIOS update

  Help... my first visit on this forum looking for a kindly soul to out me of trouble. My wife has a Tecra 8000 (European version) with P2 400 mhz. To start, she "prepares for the BIOS update". I managed to find what seems to me to be good download on this site, the 'traditional' version for computers that do not run on 500 mhz or higher? Only problem is that I know this must be installed through FDD we have with the laptop, but we have no way to open the file on disk. Neither our computers from home or at work have a floppy drive to open and copy the downloaded file. We were wondering if anyone has a copy, or access to a floppy drive to produce a copy and send it to us? We would be more than happy incurred to help us.

  Hello Brian

  Please check this page http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=EU&from=faq_selection&CFID=BIOS&FI D = TRO0000000b07. It is described how you can create the BIOS update disk, and the correct procedure of updating the BIOS for your laptop model.

  It is not complicated. I'm sure you can do it alone.

  Good luck!

• Satellite M30-404 BIOS update problem

  Hi ppl
  I have problem with the bios update, my laptop is 1.30 bios ver and ill try updated to 1.60 worm. on windows update becauseI gift? t have traditional update disk. But do not work 4 me. Help, please? Im trying to update to 1.20 ver., reading in the manual of the BIOS, but nothing hapend.
  SRY for bad English :) ppl

  Howdi wiz4rd,

  I also have a satellite M30, and a few weeks ago I had updated my laptop to the BIOS v1.6 latest. I had no problem with the update.

  Where did you downloaded your BIOS? and what Productcode your machine? (PSM30E or other)

  CyA bob77

• Satellite Pro L300 BIOS update problem

  Hello

  I have a Satellite Pro L300 (PSLBHE).
  I downloaded the new bios and started the upgrade file. A window appears and shows the version of the old and new bios (v1.70-> v2.20). All in 1 min. my laptop computer screen turned black but the green light flashed HDD and does not what it is about 15 minutes. After that I pushed the power button and the judgment of the laptop. Now if I push the power button nothing happen just blank (black) screen and HARD drive flashing.
  What is the problem? What can I do? Please help me.

  Gjon

  It's the BIOS update is finished now. Of course, the BIOS update was interrupted and now of the BIOS chip is damaged.
  What can you do now?
  Unfortunately not much. What you need is a professional help, so I recommend you contact the closest service Toshiba and ask for help. I'm sorry.

• Tecra 8100: memory slot problems

  I have a model tecra 8100 not: PT810L 12 c 42.

  I had problem with slot B mem, so collapsed to use it. Then I upgraded my RAM and inserted a 128 Mb TOSHIBA THLY6416G1FG-80 RAM PC100-222-620 slot A and used for a month. Then he suddenly went dead one day and did not boot at all.

  I took it to the point of service, they found somehow it work by sticking a piece of paper btw Aries and the cover. I used another week with ram cover duck taped it. Same story, then dead in the middle of winXP, switched off and no boot again. It took to the same service point, they tried some other RAM chipsets that it refused to start.

  The interesting thing is; When they inserted a faulty RAM in slot A and non-use slot B we get the message "memory incompatible chipset" on the screen. With the RAM mentioned above in the slot B (problem as always) and the A we get nothing, just a blank screen, DVD slot starts green lit, but nothing.

  WHAT SHOULD I DO, PLS HELP

  What is the RAM causing problems? What must a chipset that is exactly compatible with the model no pls?
  Is it the two locations of memory A or B, their change could solve the problem?

  This is the machine he itself, must it be thrown away?

  ANY SUGGESTIONS PLEASE

  Hello

  I n know where you tried to upgrade the memory but as Lisa suggested this was not a serious technician. I changed and upgraded memory on multiple PCs, and you must use 100% compatible modules! You shouldn't t install the modules with a brute force or use strange things as a communication between the housing and the memory module.
  Possible slots are damage due to use this procedure. But I hope you're a lucky man and everything will work correctly.

  If you n t know which modules are right and taken in charge so you should contact the service partner authorized Toshiba for the right and the upgrade modules.

  Good luck

• Tecra M11 - BIOS update error

  Hi, initially, I'm sorry for my bad English, I'm from the Germany...
  My Tecra M11 motherboard has been replaced by Toshiba. After that, I can't update the BIOS
  I fill the SN of my M11 and downloadet the latest Version of the Toshiba homepage.

  But when I install the Package from the BIOS, there always was the same Message: "this computer is not supported.
  Is the person who can help me :)

  Lars cordially

  Hey,.

  What operating system you use and that you have installed the package of added value? Latter is necessary if you want to make a BIOS update.

  But theoretically the DMI information could miss after replacing the motherboard. It must be written from an authorized service provider

  But why you want to update the BIOS? You have problems?

• I had a "Blue screen" problem, please help me!

  Well, I don't really know the source but it happened several times already, here are the details of the error:

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini091109 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8A90628F
  BCP3: 9CCAEDB0
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Information about the server: 7ec0ad43-82ec-418c-af58-c7d4e1d1d9e8

  copied and pasted this information of view problem history in Control Panel and it was the biggest mistake, what happened is that the PC I use suddenly gets a blue screen with big writings saying something like she stops by unexpected error. After rebooting, it says "Windows has recovered from unexpected shutdown" and gives me a chance to see solutions on the net, but the work does'nt. Fortunately, I don't have an error for hours, but I'm afraid it may happen again. Please help me.

  My laptop has:
  AMD Athlon processor
  1 GB of RAM
  1.60 Ghz
  ATI Radeon X 1250
  Windows Vista
  120 GB hard drive (33 GB free now)

  I think that the mistake occurred whenever I might have too many applications open, especially in the section of the status bar, that I can't do it, please help me!
  Thank you.

  Hello

  Think the drivers - do all.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.