Tecra A10 - 16 d does not start

Similar Questions

• Tecra Z50-A-180 does not start using the new SSD OCZ Vertex 460

  Hello

  I bought an SSD OCZ Vertex 460 for Tecra Z50-A-180 but the system only started only not with this device.

  BIOS detect SSD but not find any system start-up.

  I cloned the old SSD HARD drive, but the system does not boot with SSD.

  I installed the firmware 1.03 on OCZ.

  I await response.

  Thank you to

  What program did you use to clone?
  Maybe it's not compatible with the version of Windows.

  If you load a new copy of Windows or Ubuntu on the SSD can it start?

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Tecra A11 - 11N does not start after upgrading CPU

  Hello

  I would like to do an upgrade of the processor for my Tecra A11 i5 - 430 M 11N to a probably much faster i5 processor. I thought that the i5 - 580 M'd, but the laptop does not start when I installed this processor.

  I started the 430M, done some research on the internet and discovered that the 580 M has a very high FSB speed, and that is what probably does not work / not compatible with my machine.

  http://Ark.Intel.com/products/43537/
  http://Ark.Intel.com/products/49653
  http://Ark.Intel.com/products/49652

  and also http://ark.intel.com/

  Now, I went back to the computer store, returned the 580M and got an i5 - 560 M compared to its specifications as I've seen it would not compatible because it has the same speed of the FSB with the 430 M.

  I then later in the day tried to install this cpu as an upgrade, BUT alas!
  It STILL does not START ALSO.
  I was dumfounded left. The processors in the same line of the family are supposed to be compatible between them provided: lithography, FSB and socket type are similar.

  Or what I'm missing here?
  I did upgrades of CPU in many cases for desktop computers and laptops, and this is the first that has left me with no word to say!

  Please offer assistance or advice.

  Simon

  + The message has been modified.

  Hello

  Recommend to check this doc from Toshiba:

  + Can I put th CPU, screen, or motherboard in my Toshiba laptop? +
  http://APS2.toshiba-tro.de/KB0/FAQ35006D000RR01.htm

  Upgrading the CPU is not supported (officially).
  The point is that, even if the chipset would support the new processor, it would be possible that the laptop wouldn't start because of compatibility problems between the BIOS or other components on the motherboard and the new processor.

• Tecra M2 does not start

  I'm new havoing problems with my Tecra M2. can someone point me in the right direction with regard to breakdowns, I had a glance on the forum and the threads associated with the Tecra range but cannot find all threads that match my problem.

  In a short time, less than three days, I had a problem that began with the laptp re start when it has been moved to now does not start at all. All the lights are what I expect of them with the exception of the HARD drive indicator, that does not illuminate at the start of the boot sequence. Does that mean that my HARD drive or the connection at the disk has failed, measures of observation of fault that I can follow to confirm or deny my fears would be greatly appreciated.

  Hello

  If the HARD drive is faulty, then you should not be able to start the operating system, but you should be able to see the BIOS splash screen.
  You see that? Are you abele to access the BIOS?
  Please check this!

  To access the BIOS ESC and F1 press immediately after the laptop has been powered! If this is not possible then there might be something wrong with the motherboard or any other piece of hardware like RAM.

  If you are able to access the BIOS, then you should check if the HARD drive is recognized in the BIOS.
  You can also use the tool called Drive Fitness Test to verify the HARD drive!

• Tecra 8000 does not start after the BIOS update

  From one day to the other does not start my Tecra 8000 (400 MHz/256 MB BIOS 9.30 for years). After start-up, the disc starts to turn, but the screen including the backlight remains completely black, without red logo TOSHIBA BIOS is not accessible.

  I got a new mainboard on stock, so I replaced it, and it worked. Unfortunately now my WLAN card now did not work properly. I tried several settings of the BIOS with no results, so I decided to do an update of the BIOS from 7.50 to 9: 30. After the upgrade, I get the message "ROM WRITE successful, utility completed. LEADER BIOS: Tecra8000 v 9,30 ". Because what either kept silent, I pressed the power button to restart and heard a long and many short beeps (endless). I could interrupt what pressing the powerbutton for 5s.

  After turning on again I have the same problem as described in the first line :-( I can't get into the BIOS, but I can again update (with pressed F12). Once again these beeps.

  What to do with these beeps after average BIOS update? I replaced the MoBo connector LED with pension. Processor, memory, keyboard and HD has remained the same. So, before I start disassembling the machine, please notify, your help is very appreciated.

  Hello Joachim

  I'm not a technician and don t know what the beeps but I am afraid that the BIOS chip is damaged. Because of this, the unit is completely dead. Sorry, but I really don t believe you can do anything. Maybe the new motherboard again :(

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• Satellite A10-131 does not start of valuation or any other disc

  I have a client who has an A10-131. I had to reload the OS, but the new DVD burner does not start the recovery CD or any other original Windows CD also. Is anyone able to solve this problem. I need to know which solution is possible with such a problem.

  Thank you.

  pHoEnIx_fIrE

  How have you tried to boot from the drive?
  Have you changed the boot order in the BIOS?

  Startup options are usually available.
  1. you can press the C key immediately after to computer mobile power to detect CD/DVD drive starts
  2. you can press F12 for the boot menu
  3. you will first change the boot order in the BIOS to ODD

  But it s interesting to know if your new ODD is compatible with the laptop

• Tecra M2 does not start - the power light AC blinking orange

  Someone at - it a list of codes for the Tecra M2 flash.
  My friend has a laptop that does not start at the top. the AC power LED flashes orange. a long, short, long, short, long, short, long, short.

  I checked the battery and reinstall the RAM.
  Any IDE?

  Hello

  I agree with go.
  The ASP would be able to tell what means error.

  Usually means short and 1 long: 0
  So the error must be: 1010 1010
  Due to the last significant bit (LSB), to be read by behind:
  So it now means: * 0101 0101 binary *-> it must be converted to hexadecimal-> * 55 Hex *.

  Then, you will get a hex code.
  But unfortunately, I m not very well which could mean this code

  So ask ASP for help!

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• Re: Tecra S5 does not start

  After the upgrade to win7 and sometimes having a blue screen when you start the following happened.

  After blue screen once more, laptop is not starting at all.

  The only thing that happens is that I see the upstartscreen (in touch with tomorrow TOSHIBA) and the icons at the bottom of the screen indicating the readers. Nothing happens any more, it does not start doe.

  I can change by tapping F12 in a new boot through the CD rom boot procedure, but there is also no effect.

  Also, it is not possible to enter the bios (esc + F1).

  The keyboard works because, after a while each touch result is a short "beep".

  I removed the battery for a while and tried again with no results.

  If I can put my laptop by the ore basket is there a possibility to bring it to life

  Thanks in advance, Jos

  On this virtual path, it is not easy to offer an accurate diagnosis, but somehow, I feel THAT BIOS is doomed.
  Unplug the AC adapter / CC, remove the battery and press the power for 20 seconds. After doing this only connect the power supply and restart your laptop.

  I don't have this model of laptop and I'm not sure to get into the BIOS but try also with F2.

• XPS 8700 - new mSata does not start unless...

  I had my 8700 for a little more than a year and from the beginning, I put a 256 gb 2.5 SSD and everything has been good... unfortunately I ran out of room so I'm a 512 GB mSata and installed with the normal hiccups (bios setting, etc.) and for the most part, it works fine... installed win7 - all my programs games, media and all that. Well, now that I have everything there I was trying to format the original 1 TB hdd which served the initial boot (later converted to my games drive) drive and it refuses to format 'windows cannot format the system disk partition' I went into the BIOS and noticed his 1st listed in the order of the boot sequence. OK... so I put the mSata as first on the boot sequence and people with other disabilities 2 boot sequence HARD drives... Unfortunately, after that it does not start, say no boot device available. I tried other settings and the only way I can get my OS to load is if I put it on AHCI - legacy - then set my empty 1 TB (manually remove games) under the 1st boot device and set my msata #2. I want to use the 1 TB in a different computer and I want all my available bays opened for larger storage players when I need... but most of all I want to solve it because he needs to solve... Someone has an idea what I am doing wrong? any help is appreciated.

  Specifications:

  XPS 8700

  I7-4770

  BIOS A10

  M550 crucial mSata

  OS was initially earn 8.1... I upgraded to win 7 home

  The boot sequence is dynamic, so it does not matter if change you it in the bios. Each listed item will be sought for the boot files according to what is currently installed. Because your startup files are not on the ssd, it will never start to this player. Windows must be installed on the ssd from scratch, so you lose everything and have to reinstall everything. If you have now works well, leave it alone and save yourself a lot of trouble. Startup files are still on the original drive.

• Dell PowerEdge 2850 does not start on a CD of ESXi 3.5

  Hello...

  I have a Dell PowerEdge 2850, who does not start on a CD of VMware ESXi 3.5.  The server works very well with Windows 2000 server.  My first thought to solve this problem was the BIOS.  This is all what I've updated in what concerns the firmware on the box today.

  BIOS - A07

  Perc4e/Di - 5B2D, A19

  BMC Firmware - 1.83, A10

  Here are the latest versions of firmware available from Dell on this box.  The machine starts to start the machine.  But all I see is the first line of text of the CD which is the following:

  ISOLinux 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  My next thought was that there was something wrong with the ISO image that I downloaded.  I tested it on another machine; has worked like a champ.  Now, I read on a few different posts within the VMware communities that some people have had luck with this question and others did not.

  The inventory number of Dell on the machine is 6HDGS81

  Any advice would be greatly appreciated.

  Some of the Dell CD-ROM may be little flighty. I had hard time to install a CD earlier which worked perfectly well on another machine. I made another copy of the disc, this time burning the CD at a 4 x speed. The installation went perfectly fine afterwards.

• Siri does not start under macOS Sierra

  I've recently updated to macOS Sierra (public version) and everything seems fine, except for allowing to Siri. I tried to enable the system preferences as well as execution of the Siri application in the application. I even tried to 'facilitation' by selecting in the menu bar.

  In any case it does not start. Upon activation in system preferences, I get "There was an error in the preferences of Siri." and it takes back me to the main view of system preferences.

  Y at - he of the log files that I should be reviewed to determine the cause of this problem?

  Thank you

  Steve

  Same thing here on a MacBook Pro (13 inch, late 2011)

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.