Tecra A10 - Firewire chipset that is used?

Similar Questions

• Tecra A10 - 13I (PTSB0E-01400XFR): cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 13I with windows server 2008 R2, I am upgrading from 4 GB to 8 GB.

  My BIOS detect 8 GB, see Windows my 8GB (2 x 4 GB) of RAM, but I can see in "8.00 GB (3.87 GB usable)" system properties When I run the application you "Resource monitor", I see 4233 reserved material MB. Finally, if I use a VM with 4 GB of RAM, the virtual machine cannot use this reserved memory and crashes.

  I have read this thread: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0 | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54112&tstart=0]
  I tried to update my BIOS and changed Advanced Startup Option "Maximum memory", but no change to my memory.

  Thank you
  Jonathan

  PS: Sorry for my poor English :)

  Hi mate

  TECRA A10 - 13I is certainly capable of that means you can use 2 x 4 GB RAM RAM 8 GB.

  What is the report DirectX?
  Check the value of memory here. In order to access the DirectX, you must use the command * dxdiag *.

  Greetings

• Tecra A10 - 1GV and Docking Stations: Dynadock vs Express Port Replicator II

  Hello Forum;

  Official Toshiba site proposes to use the Docking Station Express Port Replicator II for laptop A10 1GV.

  I need for my construction work 2 monitors.

  My question: can I use with the Express Port Replicator II two additional monitors at the same time (there are 2 connectors (DVI and analog VGA/RGB). Is it possible to create two different images in this way?
  Some have said, that after a connection with the DVI - D VGA connector is turned off.

  Someone at - he experiences?

  On the other hand Toshiba offeres the Docking-station "Port replicator USB Dynadock U" -.
  This docking station is only connected via USB with the laptop. According to the data sheet - it provides an analog and a digital monitor with different views at the same time, up to 1920 x 1200 pix., extra headphones and 6 x USB 2.0. more network connection

  This official docking station works with all USB-connect computers, but in the compatibility list does not mention the Terca A10 and gives only a declaration of compatibility for the series Toshiba NB200 from Toshiba.

  Someone out there experimenting with this docking station?

  What would be the best way to work with two monitors + the computer screen?

  Thanks for all the good advice.

  Michael

  Hello

  As much as I know Express Port Replicator supports the simultaneous use of RGB & DVI only if the laptop itself also supports the simultaneous use of RGB & DVI.
  So if the Tecra A10 1GV would support the use of RGB and DVI port simultaneously then Express Port Replicator should support too.

  The Port USB Dynadock Port Replicator support VGA or DVI port. I didn't find the Dynadock, which was equipped with two ports together.
  The Dynadock can be connected to all computers with USB 2.0 and it beautiful s expansion.

• Tecra A10 - rest unknown smart card

  Hello

  I have Tecra A10 - 19 f, PTSB1E
  I use windows 7 x 64 Ent
  Install the following package, http://support1.toshiba-tro.de/tedd-files2/0/smr-20091029091828.zip, but the pilot remains unknown smart card.

  Can someone help me?

  Thank you
  Roberto

  You have installed the driver properly?
  Unzip the driver downloaded in an empty folder. Go ahead and you will see a folder named x 64.
  Start setup.exe from there.

• Can I use Tecra A10 OS disk to install the OS on Tecra M10?

  I have a tecra A10 complete with Windows Vista Business installed (and saved in an image using Easeus Todo backup file

  However I also have access to a Tecra M10 entered without an operating system, although the sticker COST (product key) is the same for a windows Vista Business.

  My question is: would my Windows Vista Business backup work A10 on the M10 (i.e. would it load hard disk M10 and then to work properly)

  If someone can advise on this subject I would be grateful if you please

  Best wishes
  Ian

  At first, I must say that Toshiba recovery image created separately for each laptop model and it is 100% created to work on the specific model. Why?
  Each laptop model has different hardware platform and all the drivers, tools and utilities for some models are part of the recovery image. These recovery images are also tested.

  Generally if the two models have the same hardware platform (hardware) it can be used.

• Tecra A10 - no sound using Win XP

  Hi all
  I have some problems with the sound of my Toshiba Tecra A10. I have already installed the Audio from Realtek driver and I see the little speaker symbol down on the right side, too.

  But I don't hear anything. The Device Manager has a yellow question mark on "Modem Device on High Definition Bus" Audio.

  I installed the Driver Modem Agere Systems, but nothing happened.

  Can someone help me and give me a link for this driver I need.
  I use Windows XP.

  Details of the material:

  HDAUDIO\FUNC_02 & VEN_11C1 & DEV_1040 & SUBSYS_11790001 & REV_1002\4 & 9E9AEC4 & 0 & 0101

  Kind regards

  > I use Windows XP.

  OK, although similar questions I with Win XP on other laptops with new HD audio from Realtek.
  The point is that you have SP2 and SP3!

  The SP2 and SP3 provides important patches and fixes for the HD audio
  Then firstly uninstall the Realtek audio driver.
  Then install the SP2 and SP3.
  Then go to Device Manager and remove the marked devices of yellow exclamation.
  Reboot the laptop.
  Now Win XP should find a new audio device and should ask the driver.
  No, you must install the audio driver from Realtek.
  Reboot once more and now the sound should works fine

• Tecra A10 erratic mouse then freezes when serial port used for something else

  MT Tecra A10 was beautiful, but has developed a growing problem. It is running win7 ultimate. When you connect anything serial port wise it blocks indicating the Mouse / touchpad. USB mouse feezes completely, 98% frozen touchpad series same happenes when connecting via a usb emulator. Software on the laptop using series includes RS logix, perfect Omron CX1 Motion and NQ Designer, that said that they worked, can anyone guid help me pls.

  See you soon

  Martyn

  Hello

  Eventually, the software that controls the serial port or the device connected to the serial port is not fully compatible with Win 7.
  I think that this should be checked first.
  Maybe one of you should look for the Special Forum of the manufacturer of the software for more details

• Tecra A10-112 - cannot use 8 GB of RAM

  Hello

  I'm trying to upgrade the memory on my TECRA A10 - 112 PTSB1E (Windows 7 and Server 2008), when I upgrade to 6 GB ram (1 x 4 GB + 1 x 2 GB), there is no problem what so ever (52 MB hardware reserved + 5700 MB useful) Windows.

  But when I go to 8 GB of RAM (2 x 4 GB) I get material dedicated to the memory of 4297MB and 3129MB of memory used (under windows) and I can not find how to reduce it to 6 GB levels. The bios sees 8GB, windows detects the 8 GB and the fact CPUID. I tried to update my BIOS on Toshiba support site, but I get "Computer not supported" message when I run the update file, I downloaded at Toshiba.
  Any help would be appreciated.

  Thank you

  Andy

  Hello

  It would be interesting to know which modules of memory you use exactly. You use the noname or high quality, e. g. Kingston modules?

  Maybe the modules are not fully compatible, so you should test the other modules.

  Also, what program/tool tells you this information on reserved hardware memory? If the BIOS and Windows recognize 8 GB, everything should be ok.

• Tecra M2 - adapter that I use?

  Hello

  I bought an old Tecra M2 but without the AC adapter.

  I found no Reference Toshiba in he owner manual, or in the support section (all kinds of Tecra are listed, but not the Tecra M2!)

  I have an old Toshiba Satelitte pro with a power adapter (15V 3A output) Toshiba. If it works? Bad tutored?

  Some people have told me it would be necessary to have a power supply with an output of 15V 5a. Is this good?

  What do you think?

  Thank you

  Hello

  Your Tecra M2 needs adapter that support these specifications;
  15V 5A 75W, 100-240 V
  The PA3283U-1ACA AC adapter would be compatible.

  Google for this number and you will find online offers.

• Tecra A10 - 1 h may not display the support page

  OK, I bought a Tecra A10 - 1 h from the local dealer here in the UAE.
  I know that I should go on the site of the Gulf to look for pilots and others, and I was able to find the model from there, but when I click on the 'Go' it gives me:

  We're sorry. The page you requested is not available.

  I get the same response when I entered the serial number instead.

  Now, when I discover that the product, the specifications mentioned on the site are close to mine, but not exactly the same thing, for example, on this page:
  http://Gulf.computers.Toshiba-Europe.com/innovation/en/series/Tecra-A10-serie/1056184/
  He mentioned the graphics card like Intel® | Mobile Intel® GMA 4500MHD. But the one I have here is a Mobile 4 Series Express Chipset Family. Which is different.
  Edit: Utility Intel tells me that I have: Chipset Mobile Intel® GM45 Express. I'm confused now lol.

  I know I have to use the site of Gulf and not him Europe site, that's what I did. I don't understand why the specs on the site are different than real.

  Post edited by: Hassan_3

  Hi mate

  I could open without the problem of page.
  I found your laptop here and I clicked on see details
  http://Gulf.computers.Toshiba-Europe.com/innovation/en/product/Tecra-A10-1hr/1075739/toshibaShop/false/

  In any case, this laptop belongs to the European series of Toshiba.
  The laptop was equipped with the Intel GM45 Express chipset and Mobile Intel GMA 4500MHD graphics chip

  Everything is OK and the reference page correctly offers info

• Tecra A10 - 14Q - no external screen 1680 x 1050 resolution

  Hello

  I want to use the native resolution of 1680 x 1050 on my Tecra A10 (analog) external port. I can't get this to work - the display shows "out of range" (?) - very strange.
  The best resolution that works is 1400 x 1050. When we look at the possible resolution of construction in the Intel G45 Chipset graphics, it goes up to 1920 x 1200 and more. So it must be possible...

  You use the most recent driver, tested on 3 screens (Samsung, Benq, HP). I think out of reach of the means that there is a signal from the port, but not at the right frequency. Specifications of the pilot at this resolution say 60 Hz, which is the norm.

  Can anyone help? Is there a tool to tweak the display settings for the graphical interface Chipset Intel G45 (like ATI)?

  Your B.

  > The best resolution that works is 1400 x 1050. When we look at the possible resolution of construction in the Intel G45 Chipset graphics, it goes up to 1920 x 1200 and more. It must be possible

  First of all not all resolutions are available and taken in charge by a graphics chip or a graphics card driver!

  In order to use such a resolution, both parties (the graphics chip and graphics driver) should support, but if one of the parties would not support the resolution of your favorite, then you won't be abele, use it!
  That is a fact.

  I recommend that you check the manual of the user that was preinstalled on your laptop
  You can find the emanations of the resolutions available and supported.

• Tecra A10 - 1 HL: released a new version of custom display driver

  My Tecra A10, use an old versionf of the display driver: Mobile Intel (r) 4 Series Express Chipset Family 8.15.10.1872.

  On Intel site now there are versions of recent that solves many problems: I can not install because Tecra A10 uses a version customized for this driver and install no customized version of Intel can cause problem!

  When Toshiba release new customized version? Update the site the last and unique output is of * 08-13-2009 *: it's time to update... or not?

  Hello

  May I ask why you need a new display driver? Do you have problems with your laptop or what exactly?

  I mean that if the official driver of Toshiba works correctly I don't see a reason to update something. Never touch a running system ;)

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.

• Tecra A10 does'nt recognize 2nd HARD drive in the Bay of the STRANGE

  Hello

  My TECRA A10 - 1 HG PTSB1E does'nt recognize my second HDD that has taken the place of the cd-rom.
  I use a SATA caddy and the boot of the A10 with a CD-rom error!
  is it not possible to use a shopping cart with a TECRA A10?
  Does anyone have a solution?

  Thank you for your experience of return.
  Best regards

  Hello

  I guess that the Tecra A10 does not support these updates.
  The 2nd SATA controller does not seem to support the additional HDD instead of ODD.

  But I've read a few things to get such2nd as recognized HARD drive.
  You must start the laptop without the HARD drive caddy in ODD Bay.
  After that the Windows system has started, you can plug/connect the HARD drive caddy and system PnP service should recognize the new device.

  I think this isn't the best solution, but it seems like it s the only way to get this HDD caddy recognized in the Bay of the STRANGE

• Tecra A10 - 12Z BIOS 1.6 wanted to move to 3, but 'not supported' - W7H32

  There are many problems with this Tecra A10.

  As Windows Xp is disabled, I tried Windows 7, which is too awkward, so I wanted to try the eSATA operating systems. Although I could install Lubuntu on eSATA it would not start (no hard drive inside most) to eSATA, but booted from USB.

  Read in the forum and put the Windows 7 Home 32 disk inside again and downloaded the BIOS update only to get a response "not supported".

  The A10 has a Windows Vista professional sticker slot, is the only OS where this Tecra can get BIOS updated?

  We have no records of Windows Vista.

  Installation of Windows 2000 or XP, it's really a lot of time, even for 9 x.

  The last beta demoCD with eComStation, todays OS/2Warp, works fine on the Tecra, it has Windows integrated 3.11, is that not? Windows 3.11 on a SD card installation must be as fast and as possible. If there are drivers available?

  ReactOS (freeWindowsXP) is usually able to boot, but it is still in the alpha stage!

  As for flat BACK? There are the LiveCD with BACK.

  You can also find Vista LiveCD socalled VistaPE CDs on the net, but their origin is unknown.

  What is the best option? Is there only one option?

  Hello

  > Although I could install Lubuntu on eSATA it would not start (no hard drive inside most) to eSATA, but booted from USB
  I guess that the BIOS does not support booting eSATA port but just the USB port.
  But it's just an idea... that should be checked once more in the BIOS settings.
  Maybe a BIOS update would also help.

  > Read in the forum and put the Windows 7 Home 32 disk inside again and downloaded the BIOS update only to get a response "not supported".

  BIOS update may be run from under Windows system only. But the BIOS update also requires some software additional Toshiba which depends on the system.

  In the case of Windows 7 or Vista, the value of added Toshiba package must be installed. In the case of Win XP, you must install the package of common Modules.

  To be honest I don t understand what you want to do
  Tecra A10 is a great unit. I have the successor called Tecra A11. I use Win 7 and its really awesome OS. Much better than the beginning of Win XP