Tecra A11-126-USB-Serial Controller driver with Docking Station

Similar Questions

• HP 15-g049au: USB Serial Controller Driver for windows 7 64 bit

  USB Serial Controller Driver for hp 15-g049au windows 7 64-bit

  Hello

  Install the drivers for the Chipset on the following link and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%208.1%20-%2032

  Kind regards

  DP - K

• Satellite L30 - required USB serial controller driver

  Hello everyone,

  I can't find the driver for USB-serial controller C for my Satellite L30.
  Needs in order to connect my Samsung mobile.

  Thanks in advance,

  Jacob

  To be honest I had never heard about USB-Serial Controller C.

  The windows operating system contains drivers own controllers USB (USB port).
  This means that you will not find any special drivers for USB controller.

  If you have some connection with the cellphone problems then I recommend to install the software that was supplied with the mobile phone. There is always a CD with the software.
  Before installing this software, you must uninstall the previous software.

  By the way; You can delete the C USB-serial controller in Device Manager and reboot the laptop. Then check if the windows will recognize this controller again.

• USB Serial Controller driver for ProBook 4530 s

  Hello world

  I need driver for USB Serial Controller for ProBook 4530 s. I him have not found anywhere.

  Thanks in advance

  DOOH!  Found.  Checking validity of fingerprints.  I have looked for the id and got HP toot sweet response.

  Are ' thank you all for your kind cooperation.

  da signing.

• Prolific USB-serial controller: driver does not not in Windows XP

  Mac OS X 10.6

  VMware Fusion 3

  Windows XP

  ABCProducts-USB-Serial controller

  USB-Serial controller is detected by the MacBookPro as shown in system information:

  USB-Serial Controller:

  Product ID: 0 x 2303
  Vendor ID: 0x067b (Prolific Technology, Inc.)
  Version: 3.00
  Speed: up to 12 Mb/s
  Manufacturer: Prolific Technology Inc.
  Location ID: 0 x 04100000
  Available current (mA): 500
  Current (mA): 100

  Start the merge.

  Invited to connect prolific Series USB for Mac or Windows

  Select Windows

  Check in Windows Device Manager

  "The drivers for this device are not installed. (Code 28)

  To reinstall the drivers for this device, click on reinstall the driver. »

  Have restarted MacBookPro, Fusion, Windows XP

  Followed the steps of http://communities.vmware.com/message/1073352 , but there is no extensions to unload

  At a loss what else to try

  Try to download the relevant driver for this unit from its http://www.prolific.com.tw/eng/downloads.asp?id=31 Web site, and then install this driver in your client operating system to Windows XP.

  When VMware Fusion then redirects the USB device to your guest operating system, you should be able to see the device.

• Tecra M9 - save the settings of display with docking station

  Hey there.

  I have a user who has a Tecra M9 on a docking station.
  There are 2 monitors connected to the docking station with VGA, the other with DVI. I use the Nvidia Control Panel and configure the screens and all is good in the world.
  That is until the user off the laptop, some work at home, then puts the laptop in.

  Therefore, only one monitor works, with the second out of action.
  I can go back and reset the configuration, but the user does not want that to happen every day.

  Any suggestions on how to get the laptop to save your setting as the case not docked or anchored?

  Thank you!

  > That is, until the user off the laptop, work at home, then puts the laptop in.
  Do you know what the user did in the past?
  To my knowledge there is not any special options that could save it. If you click on the button (apply) the changes are made and recorded.

• Tecra A11-126 - can't leave mode "idle"

  Hello

  I have a problem with a Tecra A11-126. When the laptop has to start at the "idle" mode, it nothing"happens." The screen remains black, the fan is going strong, but the small LED lights green (in front of the laptop next to the stop/sur-symbole). The only thing I can do is to restart the laptop using the button Off / On.

  Do you have any suggestions for me, why this is happening?

  Best regards
  Anna

  Hey,.

  Wait a moment please, it s a bit confused

  What do you mean with "idle" mode? You shut down the computer, or was it in the Hibernate or standby mode?

  And what LED you mean exactly that green switches? On the left side of the power CONDUIT it s the AC adapter LED and across battery LED.

  Then, you talk about restarting the laptop using the / disable the button. This means that the laptop starts properly if you do this or have you noticed the same problem then?

• USB - If xHCI USB host controller driver problem

  My new Windows 8 in Sony VAIO found the problem with the USB - IF xHCI USB host controller driver, who couldn't reinstall Windows. What should do? I have not done the recovery discs! Please answer...

  Thank you

  I saw this post today and the information provided helped me to solve this problem.

  Click here

  http://www.eightforums.com/hardware-drivers/17161-Intel-wiusb-driver-not-working-properly.html

  The link essentially says to visit the Intel Web site and use the Intel driver update utility. The utility automatically searches your computer for devices that are eligible for an update. Hope this helps you because it has helped me. Also I have updated my wireless driver while I was using the Intel drivers update utility as a newer driver has recently been made available.

  It worked for me; However, I ended up having to uninstall the old drivers Intel WiDi, then by restarting my computer before the setup.exe file would go and install on my computer (dell inspiron). I created a restore point in case it did not work, but everything seems to work smoothly!

  I must also stress that just remove the driver Intel WiDi also got rid of the yellow exclamation, and unless you plan to try to connect wirelessly to your computer to your TV, I don't think it's something you need. Here is a link that explains what is the driver:

  http://www.Intel.com/content/www/us/en/architecture-and-technology/Intel-wireless-display.html

• Tecra M5: Double monitors with docking station?

  Hello

  I have a Tecra M5 with docking station, in the past with other laptops, I was able to hook up a monitor by using the analog port and the other with digital and used both with the screen down.

  This seems not possible on this new, I have options to perform a monitor with the laptop or with a TV screen, but not two monitors to separate whole.

  Everyone was able to get this to work if so how? Graphix is the NVIDIA Quadro NVS btw.

  Thank you

  Hello

  It is very interesting, but all I know is not possible. I'm not sure at 100%, but for something like that you need a special graphics card that supports something like that.

  The same situation is with my Tecra. But the idea with two external displays is not bad. :)

• Recovery CD Sony Vaio Z 2012 with Docking Station

  Hello

  I try to use my recovery CD on my Sony Vaio Z with docking station.  VAIO Care says if I want to perform a full recovery, I need to restart the system.  I restart, nothing happens.  How should I proceed?

  Hello USER 975909.

  Be sure to start at the bios and set the boot on external usb first priority and try again.

  Nick-

• Tecra A11 (PTSE1A - 00L 005) - Dual boot with XP and Windows 7

  Hello

  Just bought a new Tecra A11 computer laptop running WIN7 Pro. Then downloaded and installΘ_ * virtual XP Pro * _ but not happy with the results that a lot of things he can do my other dual boot 17 "computer laptop with Vista/XP Pro will do.

  Background
  There are 3 partitions on the HARD disk
  1. active primary recovery 1.46 GB (without drive letter)
  2. principal asset C: start 287 Gb
  3 primary Partition 9.2 GB (no drive letter, the unknown application)

  Can I partition the C: drive in sectors 2 X 145 GB and make the new partition _ * assets * _NTFS?

  When I tried to install Xp Pro on another machine current Win7 partitioned as shown above, it 'blue preset' at the point of loading Xp using the RAID SATA CH8M-E charge via my USB FDD controller. Is it because this SATA driver is not current?

  What is the correct SATA driver?

  Does anyone know for sure that this machine will operate in dual boot Win7/Xp Pro?

  Any help much appreciated

  Peter

  Yes, you can dual-boot two versions of Windows.

  What you do is:

  Create recovery discs just in case something happens.
  Retractable C: drive at half the size.
  Create a new partition NTFS for XP.
  Download the driver for the controller SATA F6 www.intel.com
  Copy the SATA drivers on a floppy disk
  Boot from your XP (must have SP2 or SP3 slipstreamed) disc, press F6 when you are prompted to use the SATA driver on the floppy drive (to avoid the BSOD 0x0000007B)
  Configure the installation of XP to install on the partition that you created.

  When you restart, XP may have taken over and ignore Win7.
  In this case, you can restore the Win7 boot loader using EasyBCD (google is your friend)

  If the BIOS has an option of SATA controller Mode, simply activate the IDE Mode instead of the SATA driver.

• ProBook 470 G1 - USB bus controller driver

  HI.i am looking for Ideas of universal serial bus controller driver.hardware values are:

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1940103C & REV_04
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1940103C
  PCI\VEN_8086 & DEV_8C31 & CC_0C0330
  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  I tried everything: all the drivers page NB, installation of the driver on win update and installation with driver extracted files(7zip-open_inside).i uses win7_pro_x64.

  thx for any ideas

  ___________________________________________________________________________________
  ProBook 470 G1: i5 - 4200M, iGPU:Intel HD4600, dGPU:Radeon 8750 M, RAM: 8 GB memory DDR3, OS: Win7_Pro_x64

  SOLVED.for any person having the same problem:

  1. Download this driver

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=Intel+USB&lang=eng

  2 extract the driver files zip archives

  3. manually install driver with option: Browse my computer for driver software

  Thx for your answer.

• USB-Serial Cable Driver for Windows 7 64 bit

  This question has been previously answered with a pointer to a url which seems to no longer work; for example,.
  http://www.prolific.com.tw/Eng/downloads.asp?ID=31 I'm a generic HTTP 500 Server error today, March 2, 10.

  Any ideas on where to go to get the driver for USB - Serial interface under Windows 7 64-bit?

  Hi RyeBob,

  It seems that the link you mentioned previously work now and watch PL2303 drivers for Windows 7 64 bit.

  http://www.prolific.com.tw/Eng/downloads.asp?ID=31

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Re: Tecra A9 - 11M - replace the HARD drive with a larger

  I have a Tecra A9 - 11 M with Windows XP Professional installed. I would like to replace the hard drive with a larger drive and install Windows 7 Professional.

  Any suggestions on recommended records say 500 MB?

  Difficulties to install Windows 7 on this model?

  Hey,.

  > Any suggestions on recommended records say 500 MB?
  I assume you mean 500 GB and not 500MB, right? ;)

  Well, the Tecra A9 already supports SATA interface and there is no limit of capacity on SATA interface, so you can install a 500 GB HARD drive or more (750 GB, etc.). Just make sure that it s 2.5 SATA HDD.

  You can choose each brand of HARD drive because each model will not work. You can buy a Toshiba HDD, Western Digital HARD drive or another. No problem ;)

• Tecra M11 - 17V - identify the serial port on the docking station

  I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
  There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

  I use Windows 7.

  In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

  I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

  I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

  Hello

  > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

  I think you have misunderstood something wrong
  COM ports in Device Manager are virtual com ports
  There is no link between a serial port and a virtual com port.

  I have a question: what docking station you have exactly?

  I had an express port replicator and this device required an additional serial port driver installation.