The WAIK installation fails with vista ultimate 64-bit

Similar Questions

• HP Pavilion dv2315nr 64 bit with vista ultimate 64-bit, does not recognize Canon N650U scanner

  tried to load the old driver for my canoscan N650U on my hp Pavilion dv2315nr 64-bit running vista ultimate 64-bit. Did not work. I have vista Home premium 32-bit, but I'd rather not have to reboot just to use my scanner. Any suggestions?

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/c3b2acac-038c-4D84-A621-24388824400d

  Answered in another Thread.

  Mick Murphy - Microsoft partner

• The original OEM product key allows you to move from a 32-bit Vista Ultimate installation to a Vista Ultimate 64-bit installation.

  The product key OEM genuine original of my software to 32-bit with service pack 1 (that I bought and installed on my computer) allows to switch from a 32-bit Vista Ultimate installation to a 64-bit Vista Ultimate installation on the same computer without changing the motherboard?

  I would use a replacement disc from Microsoft 64-bit including Service Pack 2 as complete a reinstall? Microsoft 64-bit replacement drive has been obtained from Microsoft with the 32-bit version (which is currently installed) after some intractable problems found by the Microsoft Tech support in my OEM 32-bit software with service pack 1.

  I'll be able to do an online activation?

  Thank you.

  Hello

  You should check with Support to be sure. Normally the 32-bit and 64-bit key can
  be used on the same system. Of course, you need to install the 64 who will wipe away
  the installation of 32-bit. The key you should however work to check better
  with that which supplied the disc. The manufacturer of your system can also provide input.

  I hope this helps.

• Drive hard error detected on the HP Pavilion dv6835nr with Vista Home Premium bits

  Lately, my laptop has been slow to start. Yesterday, after control electronic, I noticed the screen turned black and only 3 icons were visible: Trash, Firefox and File Recovery... And a lot of small cascade titled windows: System message. and a file recovery window appears and scans to find out the necessary repairs. The message is "your computer is in critical condition. Hard drive detected error. "7 questions of repair, the next screen offers to upgrade my 'demo' (don't have the slightest idea what they're talking of)

  When I click here to activate it, they want to buy such a product.

  Is this a scam or a virus? How can I fix this problem.

  HP Pavilion dv6835nr

  Processor Intel Core 2 duo T5550

  with 250 GB HDD

  3072 MB DDR2 SDRAM

  Please help me...

  Hello:

  Yes, you should try it but do not for get rid of the virus. The drive is bad, but you can try to recover the files you want to keep using this disc.

  The GUI will allow you to explore your hard drive and if there's still life in it, you may still be able to see and copy your files to a storage device portable usb.

  If the Kaspersky Rescue CD cannot access your hard disk, then all is lost.

  Things to consider... dv9000 models are plagued by questions of the motherboard and you can opt for a new PC, rather than fixing you.

  I do not work for HP, so I don't have to think that you buy a new laptop, but you have to consider the possibility of throwing good money after bad.

  If you decide to buy a new hard drive, you can get a 7 200 RPM one which has better performance on a disk of 5 400 rpm, but it shorten the time between charges of battery a bit.

  You will also need to buy a set of recovery disks.  Info to do this is on the link below:

  http://support.HP.com/us-en/document/bph07143

  If you can still read the Vista product key 25 character on the bottom of your laptop, you can also make your own Vista installation DVD.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Satellite P100: Crackling sound with Vista Ultimate 32 bit

  Hello, I have a problem with the sound card. As initially also under Windows XP, fixed by a patch, I now have this new cracked also Vista in sound.

  Excuse my English, I translated it with Babylon.

  Hello

  There are many different Satellite P100 with the specifications of the sound chip series.
  I would be very interesting to know the name of laptop exactly; P100-XXX

  Anyway, generally update the audio driver should help get rid of the crackling sound!

  Good luck

• Cannot get the Telnet Client to install on Vista Ultimate 64 bit

  I am trying to install the Telnet Client on my Vista Ultimate 64 bit.  After waiting for quite a long time so he could install, I get this message:

  "An error has occurred. Not all features have been changed successfully. »

  Anyone know what this means and what I can do to make this complete installation?

  Thank you.

  C.

  Hello Var242,

  We will check your services and see if the telnet service is disabled.  If it is disabled, then lets set it to automatic.
  Even after installation, this service tends to default to disabled.  We will check this and see if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Reinstallation DVD for Vista Ultimate 64 - bit Edition

  Hi all

  New on the HP community and I must say I am impressed. I just bought an A6660T with Vista Ultimate 64 bit edition desktop computer. I talked to a very competent sales representative. He informed me that after I received the system, I could call Technical Support and the requisition of the re - install Vista Ultimate 64 bit dvd for $30. Has anyone done that? The reason I ask, I want to do my own clean install of the o/s, the recovery disks will not be enough for me. I believe that HP has these records on-site. I appreciate all the comments and look forward to a great experience here on the HP Forum!

  Thanks again

  Welcome to the forums! I can't wait to start your experience here with a negative, but the game you order from HP is the same as the recovery set, you can burn using Recovery Manager on your computer. HP is not the finish plain Vista install DVD for class of consumer machines.

  The sales representative may have thought class machines business, which I guess still has this option as they did on XP machines.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Hello

  I installed the role of CA of the authority in the installation, I want to use the existing root certificate when I try to import this certificate .pfx, that I have this error

  Active Directory certificate services installation failed with the following error: unknown mapping algorithm. 0 X 80091002 (-2146889726 CRYPT_E_UNKNOWN_ALGO)

  Anyone know what's wrong

  Thanks for help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• The Service Pack installation failed with the 0x8e5e03fe error code.

  Hi all

  I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.

  ' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".

  2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.

  Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514

  Error code: 0x8e5e03fe

  State: 7 "

  I took the following steps to resolve. but it's not helping me.

  1. I CA anti-virus, I disabled the Agent Client of CA.

  "2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-04-16 15:49

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Summary:
  Seconds executed: 753
  No error found.

  3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "

  Please help me

  Concerning

  Ganga

  Hi Ganga,

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Problems with the Visa Business for Vista Ultimate 64-bit upgrade

  I have been a loyal customer of ThinkPad T for 10 years. I just got my new T500. In my efforts to save money and wanting to be the best that I bought a 2089-2KU with 2 GIG RAM, Vista Business and a core 9400 processor duo, and then I started immediately at this level to 4 GIG of RAM and Vista Ultimate 64 bit. This has not been fun and my upgrade does not work as I had hoped for. Miss me a lot of drivers after downloading everything on the sites of Lenovo, Microsoft and Intel.

  Is there anyone in the community who can give me some constructive advice outside of spending $500 at a sum of $1,000 on a support, or telling me to clear the machine and buy a new one set up correctly by Lenovo in the factory?

  The easy way to upgrade is to use the Vista Business 64 recovery disks. Like you bought Vista Business 32 Microsoft license is also valid for Vista Business 64. Unfortunately Lenovo support don't honor the Microsoft licensing system and refuse to embark a recovery disc Vista 64 for you if your system came with Vista 32.

  But if you google on thinkpad recovery disks, you'll find U.S. resellers of spare parts online who are willing to sell you the Vista Business 64 recovery discs you need.

• The upgrade of the (32-bit) (64-bit) hardware with Vista Ultimate!

  I have Vista Ultimate (32 bit) installed on a (32 bit) CPU/motherboard.

  I want to buy and install a (64-bit) CPU/motherboard.

  Should I buy a new Full Version of Vista Ultimate (64 bit)?

  OR

  I can purchade a new upgrade Version of Vista Ultimate (64 bit)?

  OR

  There are other alternatives available?

  Best regards

  Mike Lynch

  About Mike but 'no cigar '!

  While searching for an answer, I found a link to Microsoft and the Agent told me that:

  "For $9.95", as an alternative to buying a new Full Version of Vista Ultimate (64-bit), I can order a replacement of media (64-Bit to 32 - Bit).

  Now that's what I call a reasonable Marketing / Sales position.

  YIKES!

  I like it.

  Best regards

  Mike Lynch

• Portege R400: Very slow Performance with Vista Ultimate

  Hi all

  Portege R400 is delivered with Windows Vista Ultimate 32-bit Edition and Vista is really - honestly - incredibly slow! (especially with R400, due to the configuration of the laptop)
  So I decided to install Windows XP Tablet PC... But I discovered that there is no driver available for R400 XP.

  I'm not directly complaining on the Portege models/series...
  It's a great design and I bought it, knowing the configuration. But I didn't know how Vista was eager for system resources...

  I complain on Toshiba policy or what-so-ever ONLY to the Vista and not XP drivers.
  Microsoft is desperately trying to sell Vista because they know, they really don't have this time and I heard stories about how they block their own market XP.

  .. .and I think that Microsoft and Toshiba can have an agreement on "selling only computers laptop Vista..." (just a guess but it seems so... correct me if I'm wrong)

  It is a torture to use Vista on Portege R400 and other equivalent configurations. (even when all the Visual effects system, disabled etc.)
  On the other hand, I can't use my XP on R400 tablet... so...

  So, trust me when I say I'm going to throw it away!
  But before doing this, if anyone of you knows a solution to my problem. Please let me know,
  because I paid a lot of money for this turtle.

  concerning

  PS: I hope that this is a democratic platform and my post not be erased or changed.

  Hello

  First of all, you don't have to suspect Microsoft or Toshiba has an agreement with Vista. Toshiba isn't the only primary selling units with just a VIsta operating system, almost every laptop to the manufacturer it.
  And you're right, Vista is a slow operating system, because it has a new UI with lots of graphic effects here and there and many features like the sidebar, you have really not at all.

  Since I bought my first one Vista laptop at the beginning of the year, I thought, as I don't want to not be installed and want my XP back and so on and there was no available to manufacturers of XP drivers download page either. I have a Toshiba laptop no and had the same frustration as you.

  Now, I had two options, check every important feature on my own via google or using tools such as engineering pilot or pimp my Vista driver installation.
  Firstly I did an installation of XP, all drivers to research, I need, who did not take my as much as I thought it would be. But after a while, I wanted to give the new Microsoft OS a chance.

  Used disk recovery and first wiped all the software I didn't need, so goodbye almost every tool installed on my machine, which was not unique to microsoft.
  Disabled many features, that I didn't want and I can say, speed increased a lot! This brought my buy an original version of Vista, made a new installation, installed all the drivers necessary, and hey, I'm happy with it.

  Thus, ended with my story, you have two options now. Search XP drivers on your own, using the tools and google or tweak your Vista. There are many guides on the internet that can help you.

  And do not be angry with Toshiba, as it's the same problem with other manufacturers too, as you can see in my case.

  HomerJ

• Error code (0 x 40000015) at the location 0x0000ec96 when installing Vista Ultimate 64

  I've just set up a computer and I am trying to install Windows Vista Ultimate 64 bit. As soon as I put in the product key I get setep.exe Application error "the exception unknown software exception (0 x 40000015) occurred in the application at location 0x0000ec96." What can I do?

  Hi MEMason,

  1. what type of installation? Is - this facility upgrade or custom (clean) installation?
  2. do you have an extra adapter connected to the computer?
  3. What is the size of the RAM (Random Access Memory) installed on the computer?
  4. do you have 32-bit processor or 64-bit?

  We recommend that you first perform an installation without a key and check if the problem persists. This means, proceed with the installation without inserting the key during installation.

  If the problem persists, we recommend that you simplify the material, for example, if you have an additional video and RAM card, then disconnect / remove the system and run the install to see if the problem persists.

  For your reference:
  See Troubleshooting Stop error messages that may occur when you try to install Windows Vista

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update stopped working after the reactivation of Vista Ultimate 32 bit

  Cloned hard drive bigger and replaced hard drive in your laptop. Everything worked fine until I was invited to reactivate Windows Vista Ultimate (32 bit), I did over the phone. Now, Windows Update does not work - service is not active. Is this a known issue? Any suggestions to fix would be appreciated. Ran Malewarebytes, Turned off update automatic and then restarted (suggested in a forum), and tried to fix with installation disc, none of them worked again.

  Five other updates have been installed with Windows Update Standalone install (an is not necessary for my system). This a better option than update mode without failure. Windows Update works now again.