Tecra A4, upgrades software problem!

Similar Questions

• What is the software problem IOS 9.3.2

  '9.3.2 IOS' I always get the message following 'a problem occurred with this Web page, so it has been reloaded' and however took place at the closing of the Web page. This problem occurred after upgrading to IOS 9.3.2.

  How to return to the previous 9.2 IOS to check if it's the software problem or something else

  You can't go back to iOS 9.2, Apple does not support without decommissioning.

  Problems of Web pages can be caused by many reasons, and not all associated with iOS. Have you gone to settings > Safari and clear the history and data from the Web site? Also, what happens to all Web sites, or just a select little? Have what troubleshooting you tried? Standard user troubleshooting includes reboot, reset, restore from backup, restore to factory; tests after each stage.

  I use iOS 9.3.2 on many devices and have no issues with Safari and Web sites.

• Tecra M3 flashing graphic problem

  I have a M3 Tecrea that comes with having a clean install / Win XP Pro with all the drivers on the Toshiba site. It is running BIOS 1.5 with Nvidia GeForce GE TE 6200 with 71.36 driver version new fom the Toshiba site. When initially, I tried to install the drivers for video controller (Nvidia), it blocks to halfway with the BSOD and restarts only is safe mode with all the text DOS/BIOS boot corrupted. Once in safe mode of Windows, the graphics are very good. If I install the Nvidia driver in safe mode all seems well but sometimes will crash on boot with the BSOD again and the corrupt boot DOS/BIOS text. If I turn off the video controller the boot corruption erors and question BSOD seems to disappear?

  After reviewing several forums there is some conflicts about what is the question. It seems like a hardware failure of video chip on the motherboard or is it software? There seems to be a problem with Nvidia video chips on these boards frying because of overheating?

  Any ideas or comments would be welcome.

  If the text is damaged in DOS mode, then I doubt that it's a software problem.

  I would like to take the laptop to a repair center, to me it looks like a graphic chip problem.

• X 200 Vista to Windows 7 clean Upgrade - Software License concern vs

  I bought a X 200 with Vista (before the free update) and now bought the Windows 7 upgrade software.  Most of the forums tech recommends a clean install instead of upgrade.  Should I worry if the software I have purchased (for example MS Office, Acrobat 9, etc.) he will have to buy another license?  Alternatively, it "will recognize" my PC if I copy down product keys?

  Hello

  Most of the software still lack activation so there, it comes to have the serial number and the corresponding Installer/CD recorded.

  With Adobe software that uses the activation, you can disable the software before the upgrade and then reactivate after.

  I don't know how sensitive MS Office is. My experience with a system that I helped to recover was that Office reactivated automatically on the same machine. I guess that even if you activate by phone there should be no problem that you reinstall on the same machine.

  Carpet

• how much usually if I want to fix my ipod because it is out of warranty? I think it is software problem.

  I bought my iPod classic late 2009.

  After I loaded, it may not turn on. So I tried to reset, but it did not help. Shows the apple logo and a large cross appeared with apple for iPod support website.

  I tried to search for different methods of youtube, but it has not helped as well, given that my itune could not detect my ipod when it is connect.

  I would like to know how much cost generally to correct the ipod if it is software problem? (my ipod is no longer under warranty)

  Pricing of the Service - The Apple iPod Support

  https://support.Apple.com/iPod/repair/service/pricing

  iPod classic	Off cost of the guarantee	Farm service
  iPod classic 160 GB (late 2009)	$299	$59

• Software problem or SIM card reader?

  Hello

  My brother just bought a new iPhone SE. Like his old iPhone 4 was unnecessary, he gave it to me.

  He has deleted all the data, so it was a whole new iPhone 4 running under 7.1.2

  Unfortunately, that he used a nano SIM with an adapter and when he took the set, things were not going smoothly and he shot it too strong, maybe because the tray was blocked...

  in any case when I turned on the phone with my SIM card (same provider that he bought the phone of) it keeps saying "no sim". I was unable to activate the phone.

  I launched iTunes, plugged the iPhone: 'no SIM '.

  I tried my SIM own brother who worked before the reset (and also before this 'incident' tray) and it was exactly the same situation.

  Then I also tried DFU restore the phone with iTunes, but it was useless.

  So I'm pretty sure that the SIM card reader has been damaged. But I still hope that this situation might be link to a software problem.

  How can I be sure that the phone detects no SIM card. (I won't call an emergency...)

  Thank you very much! It would have been my first smartphone

  Sounds like a problem of material for me. I doubt it's worth the money to get that repaired, although the phone.

• On Tecra A9 BIOS password problem

  My computer laptop Toshiba Tecra A9 have a problem with the BIOS password and I was wondering if you could provide me the password because I can't access anything whatsoever, without it

  BIOS password is very important security feature and these issues cannot be clarified on public forum.
  Any problems with the BIOS password must be clarified with the Toshiba service provider.
  If your laptop is blocked by password and you cannot access, please contact the nearest service Toshiba and they can remove it for you.

• Computer block, the cursor moves, El Capitan software problem?

  Hello

  I had a problem with a computer that I just bought. It looks and works very well, but occasionally it freezes and only the cursor can still be moved. The only way to turn it off is to unplug the power supply cord through. If I restart it, it works fine, until it happens again (three times in a period of about six hours today). I went to the Apple store and they tested all and any equipment checked OK. I had just erased the disc and then reinstalled El Capitan, but it happened even before I did. There is no other software on the disk, only El Capitan. The computer has a unique key of 4 GB, and I was wondering if maybe that could be the reason, that it should simply have more RAM and two identical sticks together?

  The last time I was on the Apple store, there is no newspaper on the computer because I had erased the disc, but now it should be, so I guess I'll be back to see if they can find anything.  During this time, is that what someone had this problem? The 'genius' last time said he believed it was probably a software problem, in which case it will take El Capitan, or at least of Safari, which is what I used whenever this happens. When I erased the disc, I deleted the version back from the drive, do not know if the top would have been better, or if it could make a difference. In addition, it often happened when I was on a site as a banking site, that may take more effort to load.

  Specifications are: iMac, G3 mid-2010, processor, 4 GB of memory (single stick of Crucial), El Capitan running.

  Download, install and run Etrecheck.

  Etrecheck was developed as a simple tool for Mac diagnostic report by a regular user of the forum of Apple in charge and the technical support employee named Etresoft. Etrecheck is a small discreet soft that compiles a snapshot of your system Mac hardware and software installed.

  It is a free application that has been honestly created to aid in the diagnosis of problems with Mac running the latest versions of Mac OS X.

  It is not a malware and can be downloaded and then installed on your Mac.

  http://www.etresoft.com/etrecheck

  Copy/paste and publish his report here in another thread to answer so that we have a complete profile of the material of your Mac and installed the software so that we can all help with your Mac performance problems.

  Thank you.

• Tecra 8100 - upgrade RAM

  There was a discussion here ("Tecra 8100 - upgrade RAM") on the upgrade memory.
  He said that for TECRA 8000 - capacity maximum 256 MB memory (2 x 128). (unlike TECRA 8100 - which can be upgraded to 512)

  Does anyone know if the BIOS change may allow 512 MB with TECRA 8000?

  Thanks in advance,
  Piotr

  Hello

  I don t think that after updating the BIOS on the Tecra 8000, you will be able to use the 512 MB of memory.
  Like you said you can use max 256 MB (2 x 128 MB SDRAM)

• Password to upgrade software

  Hello..

  I am in the field of wifi and ready to upgrade my software. When Im control setting to find the upgrade software I found that they password must contain 4 letter. I don't know I'm using the access code. I tried 4 number I used and it failled and then they told me that attempt to password faiiled. I need to remember my password or change it. Someone help me please

  This would be the password that allows you to unlock your phone 4-digit.

  If you do not know or remember the access code, the only way to remove it is to restore your phone like new.

• Tecra 9000 upgrade question!

  Hello my name is tom and I have a toshiba tecra 9000.
  My problem is that the original toshiba 20 GB hdd is vice
  and I want to buy a new toshiba HARD drive.
  My question is:
  Gigabyte how can I install it on my laptop?
  I want to buy a 40 GB, 60 or 80 GB HARD drive
  is one of this size HARD drive compatible with my toshiba tecra 9000?

  EDIT:
  I forgot:
  The laptop has:
  1000 MHZ
  512 MB of Ram
  standard 20 GB HARD drive
  WLAN to edge (default external PCMCIA netgear Wlancard)
  16 MB S3 Graphics card
  14.1 "display

  Thanks in advance for answers

  Thanks apco. Great info! :) You have to test it on your Tecra? I hope that you did not notice any problems here.

• iPhone 6 does not return to the top of automoatically. Software problem?

  A friend with an iPhone 6 may not get the phone to save automatically. Mine done but she heard there was a software problem affecting random phones. Someone at - he heard of this?

  Start here:

  https://support.Apple.com/en-us/HT203516

  If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

• Error: "corrupted error reports are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer. »

  Original title: my computer was "rebuilt" with all the new parts June 2011. Logging on his shot and miss it may stay on or shut down and restart. I have this message when I turned on my pc this afternoon:

  Corrupted error report.

  Unfortunately, the error you report submitted is corrupted and cannot be analyzed. Reports "damaged errors are rare. They can be caused by hardware or software problems and usually indicate a serious problem with your computer.

  When I turned on pc today is showed a blue screen and can something on a disc because the disc did not work properly?

  I paid for all the new parts for my computer and the computer technician has assured me that all the work was completed and correct. I bought the power supply (1) mother board, cards (2) 1 TB of memory. (2) hard drives 1 TB. (1) card reader and other elements appearing on my Computer Geek Bill.

  My music files are no longer mp3 but .oma. He/the Tech added its own files and records of music of World War II. These game. The drive D drive or slave who held my music, he said he wiped clean.

  I need to know these error reports will completely close my pc and all the information will be lost?

  Hi satindoll11233,
   
  I recommend you to disable the auto reboot system error (this option prevents Windows to reboot automatically if a Windows error to fail) of the startup options safe mode to know the exact error message or error code originally this problem.
   
  For more information, see:

  A description of the options to start in Windows XP Mode

• I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

  I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

  1. Windows Mail.  But he argued that email account for more than a year without problem.

  2 here is the full error message:

  "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

  ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

  I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

  And I'm waiting for 60 seconds, several times and it does not send

  It was 1 year there, not more. Not sure when it started.
  Read this article from Microsoft Help Support &:

  http://support.Microsoft.com/default.aspx/KB/926374

  t-4-2

• Memory possible problem or software problem - unexpected fill of blue Θcran BCCode: 1a Win7 Prof SP1

  Hi, my Lenovo T520P 8 G Ram 64 Bit OS, continues to crash (blue screen), for the most part all without monitoring (left for say 10 minutes).

  Here are the files that describe the problem:

  https://apchexs.Sharefile.com/d-s16c862eb26f42089

  Want to know if I need to replace RAM or it's a software problem. Thank you

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 4105

  More information about the problem:

  BCCode:                                               1a

  BCP1: 0000000000008884

  BCP2: FFFFFA8001222D70

  BCP3: FFFFFA8001226AC0

  BCP4: 0000000000000503

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\120115-25287-01.dmp

  C:\Users\RayT520\AppData\Local\Temp\WER-3075091-0.SysData.XML

  I doubt, there is no reason why you need to Office 2013 or 16.  The vast majority of my clients use the 2010 version and some still use version 2000 with no problems at all.

  Try to remove one of the panels of the memory and see if the problem persists.  If this is the case, put it back in and delete the other to see if they then too.  If one of them does not demonstrate the problem, then the other is a problem.