Satellite C660 freezes when WLan connection to WPA encrypted networks

Similar Questions

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• How can I configure windows update in order to start the procedure, when I connect to the school network?

  OT:help configuration of Windows Update.

  I use windows 8, now my problem is that I have to enter a user_name and password each time you start the browser, if you close the browser, or open another browser, you must enter user password again once you use a wifi or lab computers. Now when I connect to wifi, my browser instantly request name username-password but windows update is not so. I tried this a few times, only once named windows update displays dialong box asking username and password and it takes hours to do.

  How can I configure windows update already if start update already when I connect to the school network.

  Wifi authentication which traverse the browser means that you still need to open a browser and a connection that first, before any other programs can access the network.

• Satellite C660/C660D problem wireless connection

  I have a new Satellite C660/C660D and have a problem connecting to the internet using a broad band wireless.
  I have no problem when Iam connected to the power outlet, but when I unplug the power cord, as the connection turns on.
  I have another Toshiba laptop and have no problem

  Concerning

  Always the same story here

  Please have a look here on the forum of WLan.
  Read assignments related to this question because there are a lot of threads!

  Solution: turn off the energy saving for the Wlan in Win 7 power management.

• Satellite A60 freezes when running on batteries

  Hello
  I have a problem with my Satellite a60. I bought it a few months ago and he starts it freezes when running on batteries. I don't think it's a problem of software or memory. I did a few tests of memory...

  It usually occurs only minutes after startup, the keyboard is not working, the screen freezes (but you can still see the immagine!) and only the exit ramp button works... but it happens sometimes... like once a week maybe... anyone else had similar problems?
  Thank you for any response,
  Radek

  Hi guys

  It is very difficult to say what may be the problem. In my opinion, there are several reasons for this. In the boot process, there may be some conflicts with background programs and services or certain hardware components. May be overwhelmed with all this processor and simply give up.

  If you wish, you can try to disable some startup items in the system configuration utility or disable certain hardware components not used in Device Manager. I don't know if this can solve your problem, but it will be interesting to know is there some success.

  Radek did you have this problem if the laptop is connected to the power supply?

• Atheors 5005 Wlan card cannot connect to WPA encrypted AP

  I'm posting this new thread too thought...

  I'm unable to connect to a wpa encrypted using my satellite pro L20 girlfriends access point / Winxp
  Windows XP will allow me only to choose either 'disabled' or 'WEP' in the tab 'association' of the section advanced properties of wireless connection.
  I downloaded drivers atheros 5005 g (v 4.0.0.14001) and while I can find the access point and the value upward WPA encryption and enter the correct password.
  the device connects to my access point.
  I managed to stay connected with my macbook pro and my toshiba tecra m9 14 c in a few seconds...
  Anyone has any idea what I can do to get this working?

  Hello

  AFAIK the Atheros chip also supports the latest WLAN security standards, including the Wi - Fi Protected Access WPA and WPA2.

  In your case I would update the Wlan driver from this page of Toshiba:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

  This time it s a version 7.6.0

• Satellite C660 - impossible to remain connected to the Internet

  Can anyone help.

  I just bought a Satellite C660 10 days and am unable to stay connected to the internet without the power cord plugged into the laptop.
  When I disconect the internet connection lead is lost. Called to the shop I bought, and they say they have not heard this before I have Toshiba help desk phone. I called but they are closed until Tuesday

  Thanks in advance

  Hey,.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=61271

  It s known problem but a simple solution for it :)
  ?

• Satellite A300 restarts when I connect AC adapter / CC

  I have Toshiba Satellite A300, and there is problem, as soon as I connect my adapter to my labtob it restarts directry, and there is no problem when I connect my adapter for my labtob in offline or even in safe mode.
  I tried to update the BIOS but I can't caudln because it is difficult to udate BIOS without plugging your power adapter...

  something else, I changed my power adapter with another, but nothing has changed and I corrected my original vista OS labtob, but also nothing has changed

  can any body help my out to solve this problem

  awaiting your response

  With or without the battery, the laptop must run stable on the sector
  If it s not the case, it is possible that your motherboard is affected but I hope that's not because it would be the worst case :(

• Satellite C660 freezes at startup

  Hey guys can help you with my laptop, Toshiba Satellite C660-17J. At startup, it freezes even though not all the time. By freezing, I mean I can move the mouse but not open anything and nothing on the task bar highlight. The only thing I can see different is that the (wireless) network icon does not appear. The last time he if but showed only the networks symbol search.

  If I turn the laptop using the power button and start in safe mode and then restart it works OK. Do you have any suggestions whats the cause?

  Maybe your system is confusing to the top?
  Did you test new OS install? Would certainly recommend that you test this before more detailed investigations.

  Are you able to perform HARD drive recovery?

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• Satellite C660 now does not connect to the printer via Bluetooth

  I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

  Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

  Any ideas of solution?

  Hello

  From this point it's hard to say what's wrong.
  In my opinion, you must reset all settings and configure the connection to the printer again.
  Reinstall the software that you have installed in the past.
  Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

  Since your laptop can connect to the internet properly, it cannot be a laptop problem

• Satellite C660-1me - bluetooth & Wlan operate within the same radio frequency

  My alptop is Satellite C660-1me
  I downloaded all the drivers from the toshiba site, today only a window appeared, says the following:

  + bluetooth and lan devices operating in the same range of radio frequency wireless and may interfere with one another.

  Can u please help to figrue the problem and solve it.

  Thank you very much

  Hello

  This isn't a problem, but it is a simple system reviews.

  This means that your WLan works according to the same frequency as Bluetooth.

  Usually the 802. 11 B and G WLan standard using the 2.4 GHz and this frequency is also used by Bluetooth

  So if you use WiFi, disable the BT NOT to use two devices at the same time!

• Laptop freezes when I connect AC adapter / CC

  Hello. I have a Dell Latitude E7440. The laptop starts with the office end while its connected to the power adapter. It starts very well in a stack on the desktop and works normally. But the problem occurs when I connect to the AC adapter when the laptop is turned on, it freezes, for example when sound on the desk and I connect to the AC adapter, it freezes and does not respond. When I unplug the AC adapter, it takes over and works normally again. When I connect to the AC adapter again it hangs and when I disconnect, it resumes its normal operation. The third time that I connect to the adapter, it does not freeze. What could be the problem? Any help is appreciated please.

  Hi Dwaine David,

  Please write to us.

  When the issue started? Is there any hardware or software changes made recently?

  Please update the BIOS if not yet done so, to support.euro.dell.com and respect for any change,

  If possible, please try another card as well.

  Please provide us with your system tag #, email address and your name via message private.

  Concerning

• Satellite A300 - 9 pm - WLan connection issues

  Hello

  I hope some kind person can help with this problem.

  My wife has a system A300 - 21H, about a week.
  About 50% of the time, it does not connect to my wireless network and must be restarted.

  After the reboot it connects very well. But some times it disconnected so that on the net and screens 'server not found '.

  We have two desktop computers is connected to the router which is a box wireless Thomson 2, the other is wireless and never of connection problems.

  I have not updated the bios and all drivers.
  Firewall security is McAfee that get us free by our Internet service provider.

  Any advice would be much appreciated.

  Thank you

  Hello

  > I did not update the bios or all drivers.
  And why you didn't update the driver? I mean WLAN driver update is worth a try and if I could fix the WLAN on my laptop.
  Visit the Toshiba page for an update!

  In addition, it would be interesting to know what operating system you have. You have installed another OS?

  Make also sure that the firewall isn't blocking your internet connection. You can try another?

  Welcome them

• My computer freezes when I connect

  dometimes when I connect to my computer just does nothing.  The only thing I can do to restart the computer is to disconnect the power supply temporarily

  Hello Doug,

  Often, we see crashes as a result of a program from loading at startup.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If this happens only from time to time, we also consider a hardware problem.

  Carry out diagnostics of equipment provided by your manufacturer as well.

  Let us know if you have any questions.