Tecra A4 - white screen sometimes after standby

Similar Questions

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• white screen just after that I have to switch full screen?

  Wite screen just after I toggle icon full screen

  This has happened

  Don't know how many times

  Same problem now in all browsers (AB and Chrome)
  After you click full screen in the small screen or F11 continuous noise, as appropriate, the screen turns white. After 11 F or Esc to return to the small screen.

• Apple TV 4 show white screen apps after failure

  Hi, have you had the same problem with apple tv 4?

  At each time after a power outage, when I try to open third-party applications on apple tv 4, it only shows white screen. Built-in apps work fine.

  I tried the reset. It worked. BUT! It is a thing of your time to reset it and reinstall the apps one by one, especially those that require

  to connect to the app.

  Try force smoking each app instead of reinstalling them.

  Press the button icon TV twice and drag upward on all running applications and then restart them.

• Replacement Palm TX has problems white screen even after hard reset

  I hope someone can help me find a solution.

  I've been a happy user of Palm OS since the early days of Palm III.  After a Palm III and V, had a Sony Clié which lasted a long time, but finally fact poop, went to a Z22 and broken screen, then almost but not quite a year ago (in warranty, so-called), bought a Palm TX.  Worked great for a while but ends with a unit I could not turn on or off because the switch was dead.  Worked around to keep the sync cord and power on by pressing the button and then cancelling.  Finally he sent for repair under warranty.  Return a unit back to me.

  It worked well for almost a month, then it started (with no new software or usage patterns) to have white screen problems.  To resolve this problem, I tried a lot of things.  Soft reset, reset hard, leaving completely take its battery for weeks at a time.  Nothing works; It continues to go on me.  In addition, the sound is strange and garish when it beeps (for example accept zone after reset).  I bought the TX to the United States when I was home for a visit last July, but am currently living in the Netherlands.

  I contacted Palm repair center in the United Kingdom which has replaced my original unit; They said would pass on the word of my troubles of Palm and Palm should contact me, otherwise for them by e-mail.  They do not have.  I don't find an e-mail address to explain all this to anyone with any power to help me.  I tried to use the Palm website to solve this problem, but neither the original serial number or the serial number of the replacement unit I have now shows as eligible for warranty repair.  I tried calling the support number us Palm (http://kb.palm.com/wps/portal/kb/common/article/47005_en.html#howservice), but I get "call is temporarily unavailable."  When I click 'here' when asked 'If you want to query the status of the warranty of your handheld, or prefer to repair through our Technical Support Department, click here' (https://www.euroservice.palm.com/repair_entry/NLD/EE) I find myself on a page that simply says: "Please enter the Url of the Source."  I hesitate to provide information of credit card for a problem, if it can not be covered by the warranty (which I think it should be, since I'm still in the initial period of 12 months), can I give up.

  I am very frustrated trying to solve this problem.  I am disappointed with the support decreases for a PDA (which is not a phone) with Palm OS.  Since I am living (though not comfortably or well) without my calendar, address book, alarm, player, dbs, cookbook, checklist, etc., I am seriously considering to leave Palm OS.  My preference is to resolve this problem, and my idea nearly a year ago was to climb the Palm OS until it was completely gone (embedded in phones, anyway), but my problems have discouraged me to the point that I wonder if it is my end.

  Does anyone have a suggestion?

  Hello..  Not at all.   I suggest that because it was repaired in the United Kingdom, which indicates that it is a device of UK. Otherwise they would not be able to fix it it were an American feature.  Warrenties are the same, Yes, but on the marginal seas cannot be fixed across the country, they were designed for.  If it is a U.S. unit that UK should have refused to repair and referred you to US support.  Because it didn't happen I guess that's a device and if so you need to communicate with them. From the link that I sent you, on the left thumb to contact us, there are ways to communicate with them another email then. If it fails try another phone and I'm sure you can get this resolved.  If it is infact a device US contact our support pda to US @ 866-935-7256

  Message edited by Damien on 06/30/2009 08:24

• Tecra A7: white screen after removing the screen from the laptop

  I wanted to look inside my Tecra A7 to see if I could install another HD I had to hang out (no, I'm not particularly familiar with the hardware of the laptop), so I've undone the screws and began to open the case, but then realized that it would be as easy as opening an office, so I closed the case and put all the screws back in.

  The problem is, now, the LCD does not work. It doesn't seem to be simply the backlight. Everything is fine, and I can use if I plug a separate CRT monitor. I think the problem might be just that a plug inside the laptop is loose.

  Any ideas?

  Hello Lord

  I really hope that you will be able to deal with it, but I do not understand why you do this without maintenance manuals. Laptop has so many small plastic parts that can be damaged by accident. Disassemble the unit yourself is the big risk.

  I am also afraid that the guarantee may be expired now.

• Satellite M300 stay white screen on after startup

  Hi, can someone help me establish why my screen stays white after lit, I hear in the background this laptop is start up, but nothing is on the display

  Hello

  I can tell you how to check what s wrong here
  You need an external monitor and the need to connect the unit to this monitor.

  If you will not be able to see something on the 2nd screen, then I guess that your graphics chip is not OK.
  If something is not visible on the 2nd monitor, and an internal display problem could be the reason for your question

• Pavilion dv6700: white screen permanently after connecting to the projector (stuck in "projector only" mode)

  Hello community,

  Here is what happened:

  I have connected my laptop to a TV via HDMI and set the display option to show the "projector only" in the Panel.

  The fn functions do not work and have never been, probably because I, at some point, off the never installed or quick launch buttons driver after the transition from Vista to Win7.

  With the TV still plugged, I closed the laptop.

  Now, when my device is restarted, the screen remains black.

  Connect to the same or other TV sets via HDMI won't show 'no signal' on the TV.

  Connection to an external display or projector via VGA will show either no signal.

  So I presume this must be the source parameter, which would need to be changed back, but I have no idea how to do that blindly. Anyone got any ideas how I could solve this problem?

  I thank very you much in advance!

  Fixed drawing of one of the two RAM Modules. Just like that.

  Hope this can help others to solve the problem.

  What has not helped:

  • Permutation of these two RAM modules and then start.
  • Reset the BIOS by pressing the keys Windows + B while pressing the power button.
  • From the BIOS menu by (several times) by pressing f8 or f10
  • Pressing on the power while pressing fn + f4 button
  • Let start normally and then by pressing Windows key + P
  • Choose different start-up options blindly with the arrow keys and enter

• Windows Recovery screen appears after "standby" mode

  Hi, I have a Toshiba Satellite C660 laptop. The problem is with "standby" mode, reactivation, the windows to the recovery screen appears as if the computer was arrested by force. Any help would be great!

  There was a faulty driver installed, I uninstalled and solved the problem! Thank you for your time!

• White screen after the Fail Safe Mode - XP, graphics, nVidia, graphics card

  Recently, my office computer Gateway running Windows XP was invited to update the nVidia GEForce 6100 driver.

  I went to update this driver.

  On the next boot, I waited several minutes, but the computer hung up on a screen empty AFTER the Windows screen.

  I tried to restart the computer normally several times, but still and always the white screen appeared after installing windows.

  I have my computer in Mode safe start, which I did. In safe mode, I disabled the graphics driver nVidia and restarted my computer. To restart the computer, it has actually reached to explore. However, in all the windows, I opened the image lag. Instead of a fluid scrolling, everything has been hectic.

  I have to enter the BIOS setup and clicked to start my computer in mode 'fail safe '. Afterwards, when I press the power button on my computer the blue light turns on, fan is running, and a single beep of the singular but NO picture on my monitor.

  I tried my monitor on another computer and it worked fine. I plugged the monitor into the gateway PC and yet, I get a black screen as if the Office Tower does not recognize the monitor.

  I thank you very much for any solutions or advice, you should be able to provide!

  All the best,

  -Evan

  Hello

  Please restart in safe mode, and then do the following

  Start - right click my computer - manage - Device Manager - adapt display - nVidia...

  Right click - Properties - driver tab - back driver.

  This should bring back your previous working driver.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul

• Reset ends in white screen, no job options

  I have a MacBook pro 15 inch, start 2011 with always OSX Lion .on that it installed.

  Never did really of the software updates, since a few days ago. It was clearly a mistake. An orange, I got first screen, then white and blue. And after another implementation, it is even more possible to connect.

  I tried all the options people suggest online mode (shift) course, mode(cmd+r), vram(cmd+opt+p+r), only mode(cmd-s) and internet recovery mode recovery. (cmd + opt + r).  I continue to ending on a white screen just after the Apple logo.

  -Safe mode = never got in front of a white screen;

  -recovery mode = never got in front of a white screen;

  VRAM-= think it worked because the sound of the chimes was stronger after;

  -Single mode = Can get all the time; but sometimes blue with white letters, then the next restart custom works for sure.

  -Recovery Internet = Ethernet cable and the world appears but only managed to reach the second screen once.

  opt + D (material check says that there is no problem with my hardware)

  I managed to reach the login screen a few times with lots of fsck - fy and restarts... But quickly dropped again after the login. At each time it failed, the Apple logo was a blue tint and I managed to reach the login, the logo was gray.

  Yesterday, I managed to reinstall OS x Lion with restoration of the Internet, the first time I got to the screen with the options.

  I worked very well with a bit of Internet and Excel. Then I wanted to reach the Java Control Panel in system preferences to check if the problem was Java. It crashed.

  Managed to connect one more time and I tried to update Java in the browser instead of system preferences. It crashed. HARD.

  After restarting, no option no longer works with the exception of the screen in single mode; but the screen is blue with white letters, so I don't know if I'm able to reach the login screen more.

  I already tried many things and I'm afraid, I only make worse it.

  I think the problem is the Java framework or the video graphics drivers. Rather the software associated with that material, but I don't know more.

  Someone knows what to do?

  make an appointment at the genius Bar to be sure that you have these questions:

  https://www.Apple.com/support/MacBookPro-videoissues/

  Your Mac MUST meet all THE requirements of the program to cover. It must be in the correct date range and must be able to run the diagnosis of VST and fail to be covered by the program.

  Mac that don't meet ALL the requirements (such as Macs who cannot run anything) is generally considered a random failure.

  They are not trying to squeeze every penny from you like car dealerships. Apple wants you to be a customer happy, if possible. The store manager can have additional flexibility to allow outdoor program repairs or provide repair cost if you don't finish eligible under the program.

• Y560: Start in graphic mode for low-power (switchable) causes the white screen

  Essentially, when I start my laptop with graphics mode intel, I get a white screen just after Windows Startup logo. Enter the bios and change to discreet single mode works very well. Uninstalling drivers intel allows me to start the chip intel with windows default drivers, and the next logical step would be to simply reinstall them, however...

  The problem of mixture is that while several installations of graphic driver intel are listed in the Lenovo support box, only one of them seems actually contain graphics drivers, with the rest just install the drivers of Power Boost for the processor, and even then, I still get black after installation screen. Worst of all, there seems to be no Intel video driver on the recovery partition. I'm really at a loss here. I can live with only mode high power of work, but I want to solve this problem.

  Problem solved.

  Did a forum search and downloaded informal solution of Leshcat. Solved my problem and got a new version of the ATI drivers which is available on the Lenovo site out of it. A little sad that Lenovo may not get their shit straight, but whatever.

• White screen then freeze or Crash

  1 week ago, I launched my computer it took a while longer for the windows logo to go when he we finished it was a black screen for about 30 seconds then I logged and it was a white screen then after 10 minutes it froze, I left it for the rest of the day. The next day after the 10-minute froze then immediately crashed. I cannot get safe mode now.

  Take off the side cover and check that all connections (power cable to the fan cooling the CPU, motherboard, graphics card, etc.) are not loose and completely inserted, so that your him blow sheep from dust of the CPU fan and power supply. See if that helps.

  Then run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Install the Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  J W Stuart: http://www.pagestart.com

• Computer laptop white screen at startup

  A few days before, at a bend on a laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service. What are the possible causes for this problem?

  Hello Pierre,.

  Thank you for using Microsoft Community.

  1. does the computer boot to the desktop, or you see the white screen on startup of the computer?
  2 did you change on your computer?
  3. What is the brand and model of the laptop?
  4. as you mentioned, "when you turn on your laptop, the screen remains blank (was not lit at all) but the computer sounded as if it was put into service ', what exactly happens when you start the computer?

  If you get white screen SAT after the start of the desktop, then I suggest you follow this article and check.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Please answer with results so that we can help you further.

  Thank you

• BlackBerry smartphones "BOLD" white screen please help

  Hello everyone hope that someone will want to help with my problem. You see, I threw the phone on the floor the other day and showed a white screen, sometimes fainting in the normal display and sometimes what is the colorful stripes. spend 2 days and then my screen was just full of stripes of color, no white screen at all. I did some research and found that the concealment of the screen and reconnect the Ribbon of the screen might work. I did and he just came back to the white screen, no more color just scratches the white screen again. I watched tape of connection and its not teared, so don't know what else to do to fix. There was this other thing that coulded works but does not, and it was just the lock screen and pressing on the lower right of the screen by pressing the button 'p '. which didn't work either so if anyone can help, I'd appreciate it.

  Hello Rafarafa

  Welcome to http://supportforums.blackberry.com

  A friend has even trying to do what you do your screen is damaged

  Your screen is in disrepair and damaged.
  It is best that you take it to a specialized, reliable and guaranteed technical service.
  And comentale what happened.

  Remember that each screen has a unique code that works with your BB.

  Kind regards.

  • Answer you like me? You want to THANK? Click
  • If it was the SOLUTION click on "accept as Solution!

  #4LL   #ichooseBlackBerry10 @Gutijose14